355b003b7f
menu_data_reset()
2020-03-04 22:20:53 +02:00
22432b1053
Reset menu state after lcd_sd_refresh
2020-03-04 21:07:51 +02:00
5edc1ef297
Fix updir and dir again
2020-03-04 21:03:57 +02:00
57c149e7b5
Comment cleanup
2020-03-04 21:01:08 +02:00
7b19715c99
Cache sdSort
2020-03-04 20:41:17 +02:00
f35e553373
Code cleanup
2020-03-04 20:33:43 +02:00
8e47cb35a3
Possible fix to longpress in sdcard menu
2020-03-03 15:29:10 +02:00
d1968f6ff0
Option to refresh/resort SDcard files when flashAir type is selected
2020-03-03 15:17:50 +02:00
f69a68b966
Fix subdir enter and exit
2020-03-03 14:55:08 +02:00
53e130fc6d
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2020-03-03 14:14:43 +02:00
6fbd632c84
Isolate all PAT9125-specific code, fix build on !MK3 variants
...
- Hide all prototypes related to PAT9125 to force all callers
to check for the proper sensor, since the handling differences
are substantial
- Remove unneeded lenght accounting from the stepper isr as as
consequence.
- Keep detailed soft failure counts for the MK3 on the "last print
failures" status screen, but fix build on variants without a PAT9125
by fixing the lcd stats function.
2020-02-05 16:20:12 +01:00
8fb8ff4bf4
Include fsensor recovery stats in the last print stats
2020-02-05 16:20:12 +01:00
3ae5fa70ca
Fix comments
2020-02-03 19:20:43 +02:00
1f482adf55
Improved lcd_menu_statistics() implementation
2020-02-03 18:40:46 +02:00
73527d6069
selfTest workflow optimalization
2020-01-22 04:45:13 +01:00
7230b99448
Merge pull request #2393 from wavexx/sync_before_resume
...
Sync before resume
2020-01-15 12:49:56 +01:00
1a8420f3f9
Merge pull request #2383 from wavexx/fix_usb_resume_check
...
Fix fan_check_error check in usb print resume
2020-01-15 12:48:48 +01:00
43870c4028
Merge pull request #2368 from wavexx/unretract_after_lcd_pause
...
Unretract when resuming a paused print
2020-01-15 12:47:24 +01:00
32c9cd2307
Merge branch 'MK3' into fix_lcd_stop
2020-01-09 14:17:56 +02:00
b088500eaf
Merge pull request #1909 from wavexx/MK3_LA15
...
Linear Advance 1.5 Returns
2020-01-09 11:22:06 +01:00
e295c83d09
Folder sorting shellSort
2020-01-08 21:16:08 +02:00
7028583e9b
Merge branch 'MK3_ShellSort' into MK3_NEW_SD_COMPILATION
2020-01-08 16:27:31 +02:00
37dc5fed45
Merge branch 'MK3_revised_filename_scrolling' into MK3_NEW_SD_COMPILATION
2020-01-08 16:26:51 +02:00
df300a2488
Merge pull request #2403 from leptun/MK3_unknown_Z_mark
...
Show ? near Z value if the position is unknown
2020-01-08 14:55:37 +01:00
e15d5e21f5
Merge pull request #2402 from leptun/MK3_sheet_on_status_screen
...
Do not show sheet on status screen if less than 2 are initialized
2020-01-08 14:42:29 +01:00
2f2e415eae
Merge pull request #2382 from wavexx/fix_lcd_stop
...
Fix lcd "Stop" when used within a pause
2020-01-08 14:40:54 +01:00
8b0f0695a8
Merge branch 'MK3_fix_shorter_sheet_name_on_status_screen' into MK3_sheet_on_status_screen
2020-01-08 15:31:33 +02:00
9abdf4e535
Show ? near Z value if the position is unknown
2020-01-08 13:46:51 +02:00
c5324291ad
Do not show sheet on status screen if less than 2 are initialized
2020-01-08 12:48:41 +02:00
d9e5283526
Fix pause->stop->PrintFromSD scenario
2020-01-07 21:02:13 +02:00
1996fc7940
Remove commented-out code
2020-01-07 20:43:56 +02:00
4422fc29f8
Set XYZ to absolute and E to relative
2020-01-07 20:42:21 +02:00
f8a0d5d773
Fix lcd_print_stop function
2020-01-07 19:54:06 +02:00
df0d781c20
Merge branch 'MK3' into fix_lcd_stop
2020-01-07 19:53:55 +02:00
1ba89b9689
Merge branch 'MK3' into MK3_ShellSort
2020-01-07 14:18:31 +02:00
57be14fca6
Complete all pending moves before restoring a saved print
2019-12-30 13:30:06 +01:00
a31319888c
Fix fan_check_error check in usb print resume
...
Also check for fan_check_error == EFCE_OK in addition to EFCE_FIXED.
Reorganize the check in order to fix both #if[n]def FANCHECK cases,
as similarly done in the SDSUPPORT case a few lines below.
2019-12-23 19:12:46 +01:00
8d60e4d6db
Merge remote-tracking branch 'upstream/MK3' into MK3_LA15
2019-12-18 18:28:41 +01:00
f071aec747
Fix sheet minimum width on the status screen
2019-12-18 08:52:25 +03:00
f0f7db57ea
Fist attempt at "saved position SD menu"
2019-12-17 00:45:25 +02:00
3ad611ca16
Merge branch 'MK3' into MK3_revised_filename_scrolling
2019-12-16 21:39:27 +02:00
8d490f941a
Make use of the CRITICAL_SECTION macros in lcd_print_stop
2019-12-16 16:39:20 +01:00
0cc68228f8
Unretract when resuming a paused print
2019-12-16 16:33:11 +01:00
955c88cf68
Merge pull request #2370 from wavexx/no_resume_while_resuming
...
Do not allow to resume a print twice while waiting for the hotend
2019-12-16 16:26:02 +01:00
faa76df2fe
Fix the "Stop print" behavior from the LCD
...
Correctly cleanup the printer state when stopping the current print:
- Disable interrupts while aborting the planner/queue to ensure
new serial commands are not inserted while aborting
- _Always_ call planner_abort_hard() to interrupt any pending move!
- Clear the saved_target, which might be set when calling stop
from within a paused state. Create a new function to clear the
paused state for future use.
- Do not disable/reset the MBL: doing so will destroy the ability to
restart correctly using M999.
2019-12-16 15:52:37 +01:00
348bbbffb0
Do not allow to resume a print twice while waiting for the hotend
...
Clear isPrintPaused just prior to restore_print_from_ram_and_continue.
2019-12-15 22:22:44 +01:00
c122399020
Merge pull request #2270 from leptun/MK3-PFW-1024
...
PFW-1024
2019-12-15 10:25:37 +01:00
d68d9c7fef
Merge pull request #2058 from leptun/MK3_fix_warnings
...
Fix "LANG_MODE 0" warnings
2019-12-15 09:29:27 +01:00
770fcd7c42
Merge branch 'MK3' into MK3-PFW-1024
2019-12-14 10:08:52 +02:00
30cee7afca
Merge pull request #2353 from wavexx/lcd_pause_fixes
...
Fix the LCD pause (regression)
2019-12-13 13:53:29 +01:00
Alex Voinea
Yuri D'Elia
MRprusa3d
DRracer