fbf947b75c
maiden eeprom: tmc2130_mode is set to normal
2018-01-16 16:56:58 +01:00
026f68fd6f
Merge pull request #404 from PavelSindler/xyz_fixes
...
xyz homing hotfix, xyz cal. status changed
2018-01-16 01:39:57 +01:00
9efa1d3a03
Merge pull request #403 from PavelSindler/M600_update
...
timeout fix and unload message shortened
2018-01-16 01:39:18 +01:00
06c6cc119b
xyz homing hotfix, xyz cal. status changed
2018-01-16 01:00:09 +01:00
d8117eab66
timeout fix and MSG_UNLOAD_SUCCESSFULL message shortened
2018-01-15 17:39:42 +01:00
981a681e52
Temperature ISR synchronization, M600 - faster unload
2018-01-15 17:29:07 +01:00
87ffb0b193
Merge pull request #400 from PavelSindler/M600_update
...
M600 update
2018-01-15 15:27:41 +01:00
9e7686b77f
unload changes reverted back
2018-01-15 11:35:49 +01:00
c36af887b7
M600 has timeout for nozzle, different procedure for unload
2018-01-15 11:30:28 +01:00
9aedaa8fe7
build 146
...
hard limits
fsensor overflow fix
2018-01-14 23:59:43 +01:00
8bd84ba4fd
Merge pull request #396 from XPila/MK3
...
Mk3
2018-01-12 22:08:50 +01:00
82304a2268
Slight optimization of the fan speed interrupt routine by accessing
...
the Arduino millis() without locking interrupts.
2018-01-12 21:16:29 +01:00
ebf6d08fae
Crash detection - message on lcd (PFW-115)
2018-01-12 21:02:49 +01:00
1fbed53200
initial
2018-01-12 20:01:22 +01:00
cfae8f859d
Merge branch 'MK3' into fw_versions
2018-01-11 16:58:47 +01:00
087532085f
development fw versions has initial message for warning
2018-01-11 15:50:26 +01:00
0d269261e4
PFW-110 - load filament - beep when loading finished.
2018-01-10 18:50:16 +01:00
43010b30b4
Build 143f
...
Crashdetection improoved, blocking temperature ISR fixed, limits for silent mode adjusted.
2018-01-09 19:54:07 +01:00
0a2087c1cb
build 143e
...
Linear advance disabled
Max feedrate reduced to 200mm/s
Silent max accel reduced to 984mm/s^2
some debug logs removed, tmc_init - log message fixed
2018-01-04 18:08:22 +01:00
8a5ba89a9c
Missing serial characters debuging
...
disabled fan ISR
disabled fsensor ISR
disabled linear advance
build 143b
2018-01-02 20:55:33 +01:00
734639c1da
Unload filament tweak
...
unload filament now has longer and faster slow retract.
2017-12-29 17:53:12 +01:00
7fb1234855
Turn off bed heater after temp calibration
...
After finishing the temperature calibration, turn off the bed heater
right away, before waiting for the user to acknowledge completion.
2017-12-28 23:47:27 -08:00
f71f133e80
power panic polished
...
Retraction set correctly to have minimum missing line
Z motor current not lowered that drascialy
Extruder motor turning off instantly
Beeping added to the end
2017-12-28 23:26:06 +01:00
f1c741d027
Filament autoloading improved and minor tweaks
...
Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading)
Autoloading now unable to turn on when filament sensor is turned off or not responding
Color not right changed to color not correct to avoid slight confusion
2017-12-28 18:59:57 +01:00
bd58718d9d
dummy "ok" response
...
build 139 (RC4)
2017-12-28 02:45:05 +01:00
e064133a04
Merge remote-tracking branch 'upstream/MK3' into MK3
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2017-12-28 01:37:13 +01:00
546314fda7
Removed debug messages from serial comunication (octoprint...).
...
build 137b
2017-12-27 20:29:24 +01:00
8f7a50cfcd
Merge pull request #343 from PavelSindler/m110_fix
...
M110 fix
2017-12-23 00:04:11 +01:00
e8477b525c
initial version of M110 fix (port from MK2)
2017-12-22 22:34:57 +01:00
257b8e9f59
Merge pull request #342 from XPila/MK3
...
Mk3 - RC3
2017-12-22 20:35:15 +01:00
6abba7bfe9
filament autoload - better detection algorithm, autoload in M600 from menu
...
unload menu always visible
2017-12-22 20:14:26 +01:00
7114772784
whitespace
2017-12-22 19:23:11 +01:00
3aca1271ed
serial resend request always contains OK
2017-12-22 18:54:55 +01:00
6f7a2ba263
Merge pull request #340 from PavelSindler/MK3_for_merging
...
removed some serial line error messages
2017-12-22 13:35:33 +01:00
1917b6a1d7
removed some serial line error messages which caused that octoprint changed status
2017-12-22 13:27:04 +01:00
33d715616f
Merge pull request #339 from PavelSindler/MK3_for_merging
...
setup function
2017-12-21 13:42:22 +01:00
71bb4022dc
setup function
2017-12-21 13:40:16 +01:00
3ddbac6056
LCD_PWM removed (will be solved other way)
2017-12-21 01:00:49 +01:00
f227952c0b
Merge branch 'MK3' into MK3
2017-12-21 00:07:01 +01:00
b8fd058749
selftest fix
2017-12-21 00:03:41 +01:00
17d9bb205a
selftest tests filament sensor, selftest messages have language variants
2017-12-20 23:40:18 +01:00
a3a0e70eeb
Fsensor autoload enabled menu and eeprom variable
2017-12-20 22:29:41 +01:00
25dd6dd673
new module adc (analog2digital)
...
temperature.cpp - adc sampling state machine removed
new dcode D9 (adc read/write + simulator)
temporarily DEBUG_DISABLE_STARTMSGS because UI blocked
SILENT_MAX_FEEDRATE reduced to 172mm/s
hexfile removed
build number 137x
2017-12-20 13:42:20 +01:00
31add2e69f
removed 4 bytes from maiden eeprom check as these could be set earlier to 0 by lcd_status_screen function
2017-12-18 19:15:36 +01:00
c6e10fb903
Removed SG software homming
...
After Calibration Z enabled minstop (SG and PINDA)
TMC2130 code simplification
2017-12-15 14:10:20 +01:00
ca55cf74e2
Merge remote-tracking branch 'upstream/MK3' into MK3
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2017-12-13 22:58:34 +01:00
356bc403b1
Automatic filament load when printer idle and preheated
2017-12-13 17:39:32 +01:00
cdeb835b5d
Failstat couters initialization
...
build number = 131
2017-12-12 23:37:31 +01:00
fde0efc75c
power panic for absolute E coordinates: initial version
2017-12-12 21:20:59 +01:00
c1416cbb33
Merge pull request #312 from PavelSindler/wizard
...
Wizard: force high power mode during xyz cal. and selftest; wizard for assembled printer
2017-12-12 20:24:15 +01:00
PavelSindler
XPila
PavelSindler
bubnikv
Michal Průša
Phil Dubach