37b50477cd
Fixup after rebase onto MK3
2022-09-16 10:23:47 +02:00
dfddf3eaa5
Initial commit for MMU statistics
2022-09-16 10:22:39 +02:00
0a90c7ffda
PFW-1386 Use Marlin 2 unload sequence for single material
...
The current unload sequence does not give good results.
The Marlin 2 sequence looks good on my end. This can be later
used to improve M600
Added all the constants from Marlin 2
2022-09-16 10:22:39 +02:00
099c3a1f1f
PFW-1386 fixup
2022-09-16 10:22:39 +02:00
38952f1f33
PFW-1386 Optimisation: st_synchronize is not needed after raise_z_above
...
Saves 16 bytes of flash
2022-09-16 10:22:39 +02:00
20c865c2d4
PFW-1386 Implement 'U' parameter for M702
...
Similar to 'L' in M701, this does not apply to the MMU
The U parameter controls how much mm the extruder will unload
Default value is 80mm
2022-09-16 10:22:39 +02:00
7e9166976f
PFW-1386 Implement 'L' parameter for M701
...
It is only used when the MMU is disabled. With the MMU we use a defined ramming sequence.
When the MMU is disabled I borrowed the usages from Marlin 2.
The L parameter only defines the length for the "fast" load length.
Default value is 70mm, same as M600
2022-09-16 10:22:39 +02:00
d6564d3617
PFW-1386 if automatic = false, raising Z-axis is done via gcode
2022-09-16 10:22:38 +02:00
5b184d885c
Add LCD_BUTTON_TIMEOUT to enum
2022-09-16 10:22:38 +02:00
2fc8b50f11
Fix lcd_show_multiscreen_message_yes_no_and_wait_P after rebase
2022-09-16 10:22:38 +02:00
09cb9c6ecd
Fixup after rebase + discussion
2022-09-16 10:22:38 +02:00
6bf2aebf04
Fix typo
2022-09-16 10:22:38 +02:00
80c640deb9
PFW-1373
...
Fix the unload procedure when the user has paused a print
then stopped the print after the temperature has reached below 175°C
Now the E-motor will move as expected
2022-09-16 10:22:38 +02:00
2aa6cfc1ab
Optimise mmu_cut_filament_menu ( #40 )
...
preheat_or_continue should be used here to reduce copying code
2022-09-16 10:22:38 +02:00
f94c2cba46
Fix rendering temp. + toolchange on MMU error screen
2022-09-16 10:22:38 +02:00
dab26fe50b
Report detected MMU version in the Support menu
...
It was just subtly broken, all the functionality had already been implemented.
2022-09-16 10:22:38 +02:00
121d43f896
Add a Try-Load-to-Bondtech operation
...
PFW-1347
2022-09-16 10:22:38 +02:00
8aa16a6429
Write documentation for lcdui_print_extruder
2022-09-16 10:22:38 +02:00
8fd1653b84
PFW-1343 initial commit
2022-09-16 10:22:38 +02:00
e8088b0161
Allow reset if the EEPROM is set to "on"
2022-09-16 10:22:38 +02:00
73c486cc2f
- Fix DisableMMU button on FW incompat
...
5823c14
- Implement eeprom var, fix reset
2022-09-16 10:22:38 +02:00
1ff7459743
Re-enable filament runout + add debug msgs
...
Needs a fix on the MMU side (report FeedToBondtech::DisengageIdler)
2022-09-16 10:22:38 +02:00
bd932b3b10
Cleanup: Fix two compiler warnings
2022-09-16 10:22:38 +02:00
352a22c22e
Cleanup: Remove unused callback
...
Remove unused callback in lcd_show_multiscreen_message_with_choices_and_wait_P
2022-09-16 10:22:38 +02:00
0e75a03c8c
Reuse FSensor runout blocking impl. throughout the whole FW
2022-09-16 10:22:38 +02:00
eed816d9de
Fix build
2022-09-16 10:22:38 +02:00
d7270e0b80
Fix lang build
2022-09-16 10:22:38 +02:00
5082da78d2
Convert button on LCD into button for MMU
...
- Dependent on current MMU error being processed
- Includes rename of LEFT_BUTTON_CHOICE -> LCD_LEFT_BUTTON_CHOICE (and right, middle as well) to avoid confusion with MMU buttons' ordering
2022-09-16 10:22:38 +02:00
0bd3dfdcf7
This starts to print ;)
...
Temporarily disabled filament runout as this breaks ToolChange operation
yet for unknown reason.
2022-09-16 10:22:38 +02:00
33650c6e56
Remove redundant call to lcd_update_enable
2022-09-16 10:22:37 +02:00
f1803357b0
Fix default selection after changes in PFW-1312
...
The Yes and No are reverted. Before PFW-132 Yes is 1 and No is 0
Now they are Yes is 0, and No is 1
2022-09-16 10:22:37 +02:00
45edc69cc4
Add back menu it confirm if extrusion has correct color after loading to nozzle via LCD
...
I've added the call to this message via the menu function to ensure it
only appears when interacting with the LCD
2022-09-16 10:22:37 +02:00
1c26875e0e
PFW-1318 Implement callback to render status line
...
To render the thermometer and degree symbols
the CGRAM table will instead swap out
the feedrate and clock symbol when
lcd_set_custom_characters_nextpage()
is called.
2022-09-16 10:22:37 +02:00
452f39dc4b
fixup
2022-09-16 10:22:37 +02:00
3b0fba14ac
Remove unused parameter nlines to simplify things
...
This allows us to remove one overload
of lcd_display_message_fullscreen_P
2022-09-16 10:22:37 +02:00
68b007c759
Fix compile-time conversion MMU2 ErrorCode -> Prusa-Error-Code
...
and hide some of the implementation details into mmu2_error_converter.cpp
which makes the code in mmu_reporting.cpp much easier to read.
2022-09-16 10:22:37 +02:00
138a0d21c7
Change default selection parameter from bool to uint8_t
...
This allows us make any of the three button choices the default selection
2022-09-16 10:22:37 +02:00
89e2bc4d6b
Change name of variable 'yes' to be more descriptive
2022-09-16 10:22:37 +02:00
031c588802
Make all choice menus return consistent values
...
Such that left = 0, middle = 1, and right = 2
2022-09-16 10:22:37 +02:00
37bfd8ecd1
Checkpoint
...
- combined lcd_show_three_choices_prompt_P and lcd_show_two_choices_prompt_P into one function called lcd_show_choices_prompt_P
- Removed third_col parameter
- Added an enum to make the button selection result more readable
2022-09-16 10:22:37 +02:00
83fefe10c1
Checkpoint:
...
- Rename lcd_show_multiscreen_message_two_choices_and_wait_P to lcd_show_multiscreen_message_with_choices_and_wait_P
- Move MMU error screen from ReportError() to ReportErrorHook()
- Fix the menu selection to work for menus with either two choices or three choices
- The buttons shown on the MMU error menu are now determined by the definition of btnOperation[]
2022-09-16 10:22:37 +02:00
ffe8c7c31a
Update lcd_show_multiscreen_message_two_choices_and_wait_P
...
to support 3 choices
2022-09-16 10:22:37 +02:00
74ea9a7e43
Remove class LcdUpdateDisabler
...
Calling lcd_update_enable directly gives us more control
This also save a bit of flash memory
2022-09-16 10:22:37 +02:00
1ba314d95b
Print the MMU progress into status screen
2022-09-16 10:22:37 +02:00
b27f690556
Add ProgressCodes -> text converter
2022-09-16 10:21:53 +02:00
9140ebba55
Add MMU FW version variables
...
hardcoded for now, but API ready
2022-09-16 10:21:53 +02:00
825eed97d4
Fix build after rebase
2022-09-16 10:21:53 +02:00
4732859a98
Avoid exposing internal variables of fsensor
...
makes the code a bit shorter as well, because the compiler can be sure
that the variables are not accessed from the outside of the
fsensor.cpp compilation unit.
2022-09-16 10:21:53 +02:00
2e293e90a0
MMU2 interface overhaul
...
First port of the new MMU2-printer interface into 8bit FW.
2022-09-16 10:21:53 +02:00
329745368e
Improve PAT9125 UI implementation
2022-09-16 10:20:32 +02:00
D.R.racer
Guðni Már Gilbert
VintagePC
Alex Voinea