28a767b460
Merge pull request #760 from PavelSindler/safety_timer_fixes
...
Safety timer not active during filament runout procedure
2018-05-28 13:28:24 +02:00
58ae70c4e1
Merge branch 'MK3' into MK3-new_lang
2018-05-28 13:22:14 +02:00
15207e4d5e
Linearity correction fix - (eeprom storage changed to byte instead of word)
...
+enabled for XYZ axes
2018-05-28 01:47:08 +02:00
2cf20c8c99
New ML support - migration - fix_source_1.sh script (replace 'MSG_xx' with '_T(MSG_xx)')
...
+ output + fixed source
2018-05-23 16:37:08 +02:00
8c9b670c76
Merge pull request #746 from MRprusa3d/MK3
...
menu returns corrections
2018-05-22 16:08:08 +02:00
137e1c5027
whitespace
2018-05-22 13:33:31 +02:00
d63a17c696
Safety timer not active during filament runout detection
2018-05-22 13:31:21 +02:00
bd587faab9
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 03:20:03 +02:00
3eb21b65ed
wizard fix: don't reset calibration status when repeating first layer cal.
2018-05-15 23:19:23 +02:00
83aa710da6
menu returns corrections
...
Settings::FilamentSensor & FilamentAutoload
removing Calibration::ShowEndStops @ MK3
2018-05-15 20:23:22 +02:00
b71a29ad96
Use ShortTimer instead of long_press_timer global variable.
2018-05-11 17:05:12 +02:00
02ecd08786
Convert Time class to template, instantiate LongTimer for longer and ShortTimer for shorter periods.
2018-05-11 16:31:42 +02:00
07a7ce1acf
Remove unused lcd_ping_allert().
2018-05-11 15:09:27 +02:00
e8730c2899
Merge branch 'MK3' into read_xyz_cal
...
# Conflicts:
# Firmware/ultralcd.cpp
2018-05-10 18:31:31 +02:00
329ea199ec
Show measured bed offset from expected position even if not homed. Remove redundant lcd_quick_feedback() calls.
2018-05-10 18:24:49 +02:00
80efafd7b9
menu returns corrections
...
Statistics
Calibration::ShowEndStops
Support::ExtruderInfo
Support::BeltStatus
Support::Temperatures
Support::Voltages
2018-05-09 00:27:32 +02:00
1d7b3ea2de
Set calibration status to calibrated also by using live adjust Z.
...
This fixes problem, that if the first layer calibration is never done, live adjusting Z during printing is not applied after printer reset. Also repeatedly using live adjust Z on uncalibrated printer leads to steadily decreasing meaningless stored live adjust Z value.
2018-05-03 22:03:38 +02:00
cd3851e175
Merge pull request #715 from MRprusa3d/MK3
...
Mk3
2018-05-03 14:54:43 +02:00
d02333918f
MaR::180501
2018-05-02 22:13:47 +02:00
72364648dd
Hot fix: Can not move X and Y axis in stealth mode, when the printer is not homed.
...
Disable endstops in move axis menu.
2018-05-02 20:50:47 +02:00
986f9fd3a6
selftest correction
2018-04-27 14:49:37 +02:00
254804cc8d
MK3 selftest: move Z axis higher before calibrating autohome
2018-04-27 09:23:56 +02:00
ab68221976
Always show XYZ cal. details menu.
2018-04-26 16:36:03 +02:00
1a80fc28e8
Add zero point offset information support menu.
...
Note: XYZ menu is shown only if not printing and printer must me homed to show non-zero value.
2018-04-26 16:36:03 +02:00
b6888470cf
Save 42 bytes of flash by removing duplicate string "--------------------".
2018-04-26 16:36:02 +02:00
c1dd269a92
Fix missing degree symbol after returning to status screen. Those lcd_set_custom_characters* calls were redundant.
2018-04-26 16:36:02 +02:00
d6aa149cfa
Conserve 58 bytes of flash by returning by reference.
2018-04-26 16:36:02 +02:00
ae08788c99
Split lcd_service_mode_show_result screens to separate functions. Make them non blocking. Remove global array distance_from_min, pass it as function return value. Make Support submenus returning to Support menu.
2018-04-26 16:36:02 +02:00
f64d266c89
Timer in autoloadmenu - dirty hack (unable to compile under 4.8.1)
2018-04-26 14:50:01 +02:00
7e462b3224
Merge branch 'MK3' into MK3
2018-04-25 19:15:36 +00:00
0b6644915a
Add files via upload
2018-04-25 18:47:19 +00:00
f207145752
Return from Autoload filament and Load filament menu item to parent menu.
...
Exception is Load filament, when temperature is sufficient to load filament, in such case, load filament is started and GUI returns to status screen.
2018-04-25 16:51:35 +02:00
010ceceff9
add another homing after steel sheet is removed; added timeout for pinda cooling; if PINDA doesn't trigger before reaching Z = -1mm, temp. calibration fails
2018-04-24 13:43:51 +02:00
043c8c66be
waiting for pinda probe cooling
2018-04-19 16:55:00 +02:00
c5af3aaaf2
Merge pull request #622 from mkbel/fix_menu_return_fail_stats
...
Fix returning from Fail stats menu.
2018-04-13 18:35:03 +02:00
6f985d23d6
Fix returning from Fail stats menu.
2018-04-13 17:20:30 +02:00
03d03aeac4
Return to main menu from filament unloading.
2018-04-13 16:51:47 +02:00
e4a4c88be9
Merge pull request #615 from PavelSindler/selftest_MK25_fix
...
selftest for MK2.5: fan error fix
2018-04-13 13:59:15 +02:00
5f3fed33cf
Merge pull request #613 from MRprusa3d/MK3
...
Add files via upload
2018-04-13 10:02:44 +02:00
591cb881cc
selftest: false fan error fix, added message in case that manual fan error fails
2018-04-12 18:24:30 +02:00
d09f190c2b
Add files via upload
2018-04-11 18:48:50 +00:00
e150d502ac
removed configuration_prusa
2018-04-11 18:49:42 +02:00
53d903e600
Merge pull request #610 from MRprusa3d/MK3
...
Add files via upload
2018-04-11 18:46:18 +02:00
52de4891fe
typo fixed
2018-04-11 18:32:27 +02:00
c8f1c55ec0
Add files via upload
2018-04-11 14:41:41 +00:00
02fda70529
farm mode: preheat menu updated
2018-04-10 14:07:44 +02:00
92997204a1
Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20
2018-04-03 12:30:35 +02:00
baade7db61
Removed unused files (ST7565R-dogm, digipot)
...
renamed functions digipot_init and digipot_current
fixed cond. trans. (menus)
fixed variant files - MK25, MK3
2018-03-29 23:01:13 +02:00
cedb30303f
Add possible action on menu item back. This fixes broken Merge pull request #586 from mkbel/ustep_linearity_2 06d5ec5.
2018-03-29 11:42:44 +02:00
d5636fd023
Merge pull request #585 from PavelSindler/farm_mode_MK3
...
checking if file is complete temporarily not active in farm mode
2018-03-28 19:39:00 +02:00
06d5ec5659
Merge pull request #586 from mkbel/ustep_linearity_2
...
Ustep linearity
2018-03-28 19:38:34 +02:00
ffdd11e960
Merge pull request #587 from XPila/MK3-V3_2
...
Mk3 v3 2
2018-03-28 19:38:20 +02:00
9cb036fbcb
Merge remote-tracking branch 'prusa3d/MK3' into ustep_linearity_2
2018-03-28 19:11:02 +02:00
40a064ffbc
Add extruder linearity correction to settings menu.
2018-03-28 18:53:37 +02:00
6e15a77c9b
preheat menu update
2018-03-28 17:50:16 +02:00
95e751dd65
farm mode: preheat menu update
2018-03-28 17:04:46 +02:00
2c3c6c54f3
checking if file is complete temporarily not active in farm mode
2018-03-28 17:00:17 +02:00
8ba83a9789
bugfix - PFW226 - selftest error
2018-03-28 16:13:54 +02:00
678cd17e7b
Increase size of EEPROM_TMC2130_WAVE_*_FAC to 16 bits.
2018-03-28 16:13:16 +02:00
57bbb0e17d
Fix wraparound from lowest value to highest value in menu value edit.
2018-03-26 20:25:23 +02:00
397e7d4791
Increase resolution of wave factor.
2018-03-26 15:17:06 +02:00
903dce9716
Merge pull request #576 from PavelSindler/MK3_for_merging
...
stealth mode / silent mode
2018-03-23 20:42:08 +01:00
2ce75293f3
stealth mode / silent mode
2018-03-23 19:49:59 +01:00
5a7e76e02b
Merge pull request #575 from PavelSindler/adc_pins
...
Adc pins, pinda temp table
2018-03-23 19:36:23 +01:00
dc32bd24fc
correction
2018-03-23 18:20:55 +01:00
2d30261976
bed voltage menu hidden
2018-03-23 16:49:06 +01:00
7ad6fb526c
typo removed
2018-03-23 15:53:44 +01:00
78f9f6b611
use defines for adc pins, temp table for PIDNA update
2018-03-16 11:01:06 +01:00
08ec920d33
merge with upstream
2018-03-15 14:25:17 +01:00
863fe1f054
show message that printer is not connected to monitoring on printer start
2018-03-14 15:35:39 +01:00
2f98ac989a
Variant file for MK2 + cond. translation
2018-03-13 23:14:44 +01:00
81cd96b8fe
Variant file for MK25 + cond. translation
2018-03-13 23:02:46 +01:00
ac1a56b493
Merge branch 'MK25' into MK3
2018-03-13 20:43:19 +01:00
5d389a2c36
Farm mode: when print finishes, ask which filament was used for print; statistics modified
2018-03-13 19:11:02 +01:00
8ec3c0fd7e
removed "Printer disconnected" message
2018-03-13 18:50:56 +01:00
f45f206faf
sorting files disabled in farm mode, start printer status needs reponse from monitoring
2018-03-13 18:50:11 +01:00
ddeb7b8c84
statistics improved, initial version of function which forces user to connect printer to monitoring
2018-03-13 18:43:42 +01:00
f487691070
Merge pull request #536 from mkbel/menu_return
...
Menu return
2018-03-13 14:30:48 +01:00
98e96c9182
Merge pull request #457 from bubnikv/MK3_fast_dbg
...
Mk3 fast dbg
2018-03-13 14:13:29 +01:00
b41d680adf
Replace problematic character in comment.
2018-03-07 20:58:15 +01:00
8ff028820a
Remove redundant parameter.
2018-03-07 20:55:01 +01:00
abb9aa0a16
not using homing currents in axis selftest
2018-03-07 20:42:15 +01:00
2a53686d2f
Document valid usage of lcd_goto_menu(), remove redundant parameter.
2018-03-07 20:40:59 +01:00
1aba608133
Document valid usage of lcd_goto_menu(), wrap lcd_second_serial_set() by HAS_SECOND_SERIAL_PORT macro.
2018-03-07 18:30:33 +01:00
0c961dedc4
Reset menu stack in lcd_return_to_status().
...
Mark menuStack.reset() as redundant in lcd_status_screen(), but leave it there to be sure.
2018-03-07 18:15:24 +01:00
716098c434
Preserve position in menu move axis Extruder.
2018-03-07 17:27:27 +01:00
d0a98dc6cc
Document valid usage of lcd_goto_menu().
2018-03-07 17:18:10 +01:00
0871925353
Remove special handling of lcd_move_z after long button press. Convert lcd_move_z after long button press to ordinary menu_action_submenu.
...
Known bug (feature) is, that with current maximum stack depth, when long press is activated in menu > settings > move axis > Move X and then Move Z is deactivated, menu is returned to "move axis" and not to "Move X".
2018-03-07 17:03:17 +01:00
77c3d7d7f7
Review and document lcd_adjust_bed_reset() lcd_goto_menu() usage.
2018-03-07 16:47:20 +01:00
6ba07a358b
Fix of a regression bug, caused by pre-calculating the extrudemultiply
...
for precission and performance: calculate_extruder_multipliers()
has to be called after extrudemultiply is changed from the printer panel.
2018-03-07 16:08:19 +01:00
33a7723fba
Merge pull request #533 from bubnikv/M221_fix
...
Fix of a regression bug, caused by pre-calculating the extrudemultiply
2018-03-07 16:03:50 +01:00
fb4230f80d
Fix of a regression bug, caused by pre-calculating the extrudemultiply
...
for precission and performance: calculate_extruder_multipliers()
has to be called after extrudemultiply is changed from the printer panel.
2018-03-07 15:46:46 +01:00
b7df176a46
Preserve position in menu Live adjust Z.
2018-03-06 22:45:47 +01:00
ed0e7a8b58
Preserve position in menu move axis.
2018-03-06 21:27:06 +01:00
020269a83c
Fix unable to go back from main menu to status screen.
2018-03-06 21:26:14 +01:00
e551ed1f6e
Replace lcd_goto_menu(...) by menu_action_back() in lcd_menu_fails_stats();
2018-03-06 19:51:13 +01:00
235803bc2a
Move encoder stack to separate class MenuStack. Add menu record to MenuStack.
...
It was needed to add menuFunc_t menu to stack, as in some places in menu, it is impossible to hardcode parent menu. Example: lcd_babystep_z can be invoked both from main_menu() and settings_menu() depending on printer status.
2018-03-06 19:47:27 +01:00
a6f900fd3c
Merge remote-tracking branch 'upstream/MK25' into MK25
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2018-03-06 15:11:50 +01:00
54749cbcba
Merge pull request #524 from mkbel/Add_fail_stats
...
Add fail statistics menu item for MK25.
2018-03-06 11:55:22 +01:00
115416dc60
Merge pull request #520 from mkbel/MK25
...
Remove Rpi port menu item for MK25.
2018-03-06 11:53:37 +01:00
XPila
PavelSindler
PavelSindler
MRprusa3d
Marek Bel
MRprusa3d
mkbel
bubnikv