e0c1e4a02d
version which should on all printer versions: autoload, selftest, filament detection, filament sensors initialization, filament menus
2019-01-24 01:12:30 +01:00
1d71c1a5d1
Update IR sensor selftest progress bar more frequently.
2019-01-22 19:02:42 +01:00
97a4623800
Fix lcd_selftest_screen for small _progress_scale.
2019-01-22 19:01:55 +01:00
9cda0b69b8
Update IR sensor selftest progress bar.
2019-01-22 18:23:00 +01:00
3ff8a7c740
Unload filament by MMU unit in selftest_irsensor().
...
Known limitation:
If filament was not loaded to nozzle it is sticked completely out of MMU. To be fixed in MMU, as this problem can be reproduced also from printer menu - unload filament.
2019-01-22 14:54:06 +01:00
c371a5ea65
Document.
2019-01-22 14:05:08 +01:00
a92d9c782b
Add IR sensor test.
2019-01-22 11:29:55 +01:00
f292a6ca7a
Refactor filament sensor selftest call.
2019-01-21 21:39:38 +01:00
e36e58f385
show sensor on/off temporarily changed to unlocalized strings
2018-12-21 21:28:57 +01:00
ba57986b72
merge changes from upstream
2018-12-21 20:58:38 +01:00
5462d451e1
show power failures in fail stats menu, shorter load to nozzle if idler sensor detected
2018-12-21 20:56:45 +01:00
d292e877df
load to nozzle shortened, sensor menu moved to support
2018-12-21 18:51:13 +01:00
3c64bad1cb
initial version which works on old and new hw, initial version of idler sensor detection
2018-12-21 17:12:16 +01:00
b0fce9122e
Merge pull request #1416 from PavelSindler/z_cal_endstops
...
Z cal endstops and stop paused print fix
2018-12-19 19:46:27 +01:00
40fe52202d
stop paused print fix: saved_printing set to false when doing stop print
2018-12-19 19:20:09 +01:00
b5430c2968
M600: consume click
2018-12-18 19:10:02 +01:00
880163dbcb
missing prototypes
2018-12-18 17:38:24 +01:00
fc5d7e35ef
fail stats mmu function definitions
2018-12-18 17:35:41 +01:00
11ab5dfd36
fail stats menu for mmu defined for MK2.5 version
2018-12-18 17:33:27 +01:00
cb1f6d2a0e
show sensor states in calibration menu
2018-12-14 19:43:26 +01:00
e0bed71801
comments update
2018-12-13 17:01:45 +01:00
bbba27c15f
idler state menu
2018-12-13 16:53:59 +01:00
a9829b6a1a
add statistics and idler sensor state
2018-12-13 00:12:00 +01:00
29ecd4ec7a
duplicit T-codes execution improved, E-stepper movements when waiting for ok from mmu, continue loading function improved, eeprom: fail stats for mmu
2018-12-12 22:32:47 +01:00
c256af0a1c
unknown filament added; the same T-code will be not executed twice in a row; continue loading
2018-12-12 14:50:55 +01:00
8af127870d
consume click
2018-12-11 15:59:44 +01:00
6d6de67c3f
consume click
2018-12-07 18:31:30 +01:00
0ceeba38cb
Lang - text "Copy selected language from XFLASH?" shorted to "Copy selected language?"
2018-11-22 17:32:53 +01:00
37273d9fca
Lang - 'Auto Deplete' changed to 'SpoolJoin'
2018-11-22 17:19:38 +01:00
f0624a9e97
Lang - some not localized texts marked as localized, formating fixed
2018-11-22 14:37:29 +01:00
32da5bc039
progress bar time counted from feedrate and E - distance
2018-11-12 19:55:53 +01:00
f4c1e7924f
M600: show progress bar during first filament load
2018-11-12 18:35:06 +01:00
5931d15566
whitespace
2018-11-09 18:31:28 +01:00
c991c8b314
resume print fix: wait for heater() never disable steppers
2018-11-09 18:29:35 +01:00
22cf2c6b6b
M600 load messages synchronization fixed
2018-11-09 15:31:44 +01:00
02e31433f4
PFW-634 Move T<nr> code just before extrude code to properly load filament in first layer calibration with MMUv2.
2018-11-06 15:46:37 +01:00
908fffc19a
Merge pull request #1306 from PavelSindler/fsensor_q
...
filament quality measurements disabled
2018-11-05 19:14:34 +01:00
89ad02ac8c
filament quality measurements disabled
2018-11-05 18:37:36 +01:00
50f9bf06be
Save 74B of flash memory.
2018-11-05 18:02:46 +01:00
e95c2ad592
Display auto deplete as not available if filament sensor is disabled.
2018-11-05 17:43:07 +01:00
ef5be690fb
Add autodeplete setting into tune menu.
2018-11-05 13:54:22 +01:00
78775e2f87
Merge pull request #1302 from PavelSindler/wizard_improvements
...
Wizard improvements
2018-11-05 10:38:41 +01:00
688c10247e
Merge pull request #1291 from XPila/MK3-new_bs
...
lang update
2018-11-05 10:38:29 +01:00
0a2ad97bc6
Merge pull request #1290 from PavelSindler/mmu_improvements
...
mmu improvements: load to nozzle, gcodes for single material mode, M600 fix
2018-11-05 10:38:05 +01:00
3d24f5437c
leave Z move menu (hotfix)
2018-11-04 23:44:29 +01:00
daef0eeb67
Merge pull request #1297 from MRprusa3d/PFW-635
...
MeshBed Leveling Fail
2018-11-04 23:33:29 +01:00
e177c2b669
Merge pull request #1295 from PavelSindler/feedrate_change
...
choosing filament from T? menu changes feedrate fixed
2018-11-04 23:13:03 +01:00
8afb83406e
Wizard for assembled printers (contains more steps now)
2018-11-04 23:08:23 +01:00
33a29cd416
Fix PFW638 - remaining/elapsed time >100h displayed in hours
2018-11-04 20:27:09 +01:00
e2d2fb58aa
Z calibraion: always ask user to clean nozzle
2018-11-04 18:47:08 +01:00
73794b56cf
MeshBed Leveling Fail
...
Z-leveling after MeshBed leveling failing
2018-11-02 23:03:14 +01:00
e304319e15
choosing filament from T? menu changes feedrate fixed
2018-11-02 20:25:24 +01:00
18a8ae5b8f
Bed PowerMonitor
...
bed power monitoring correction
2018-11-01 20:55:42 +01:00
aaf65051f9
M600: "is color clear?" menu synchronization
2018-11-01 18:28:52 +01:00
96ce324b7c
load to nozzle improved, unified feedrate and E-distance for final feed used in load filament function, M600 etc.
2018-11-01 16:29:09 +01:00
a0e4acead3
lang - removed unused code and some service messages changed to "not translated"
2018-11-01 14:07:16 +01:00
e80af46503
load to nozzle and Tx and Tc codes: intial version
2018-10-31 21:48:05 +01:00
a9317b4d36
upstream/MK3 merge
2018-10-25 21:46:32 +02:00
a6a81c6ea6
mmu2: filament senor (FINDA) can be switched ON/OFF from menu without dependency on pat9125 state
2018-10-25 18:26:26 +02:00
940f436a5f
merge MK3_dev into MK3
2018-10-22 20:25:29 +02:00
1585dc66b0
Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500
...
Known limitation: Unable to compile.
2018-10-08 15:58:49 +02:00
f9d8c46802
Enable/disable optical quality meassurement in settings menu
2018-10-04 15:48:28 +02:00
e50025cc7d
static_assert - portable solution compatible with C++98
2018-09-27 19:59:29 +02:00
3f28632443
Use cs.axis_steps_per_unit from ConfigurationStore.
2018-09-24 14:54:41 +02:00
2607a0c4ed
Update documentation.
2018-09-19 17:22:06 +02:00
b92b307ee8
Make variables constant.
2018-09-19 17:21:45 +02:00
cce8131070
Add missing s for seconds of print time.
2018-09-19 17:20:41 +02:00
b5bb40474d
Fix print time overflow.
2018-09-19 17:17:32 +02:00
96aada9061
load filament messages, czech language missing translation readded
2018-09-11 18:25:38 +02:00
25a46557d1
merge with upstream
2018-09-10 22:11:32 +02:00
8a9f066c1b
choose_extruder_menu: extruder -> filament
2018-09-10 22:09:37 +02:00
6fa798aa83
init
2018-09-10 20:08:13 +02:00
1253fb338a
wizard hotfix
2018-09-10 18:02:54 +02:00
5a6ef00cfc
Do not unload filament from nozzle when touching bed in the end of first layer calibration. Unload it after reaching home position.
2018-09-07 10:50:23 +02:00
35cf3f3a61
Time info
...
suffix for doubt time estimation (i.e. if feed rate changed)
2018-09-04 14:39:46 +02:00
12b1769531
Fix printer reset when changing filament during print over USB.
2018-08-30 16:02:13 +02:00
25a22120fb
1-st Layer Calibration correction
...
filament loading improvement
2018-08-30 03:32:33 +02:00
515e78cfd1
Eject filament feature in menu, M600: if it was envoked by FINDA, eject filament
2018-08-29 01:58:28 +02:00
b9808354c4
Merge remote-tracking branch 'upstream/MK3' into M600_change_extruder
2018-08-28 23:53:35 +02:00
705f098b1c
eject filament: initial version
2018-08-28 23:50:31 +02:00
d3869bd857
Z-endstop @ MK3
...
add show P.I.N.D.A. state menu item @ CalibrationMenu
2018-08-28 16:12:59 +02:00
3e2cb72695
Merge branch 'MK3' into auto_deplete_2
2018-08-28 11:01:30 +02:00
72cd0d26f9
Increase scope of code disabled by macro TMC2130 to whole lcd_settings_linearity_correction_menu.
2018-08-27 21:08:40 +02:00
b08ae95568
Rename autoDeplete to lcd_autoDeplete and make it global. When filament runs out, call M600 AUTO if lcd_autoDeplete is enabled. Shorten finda polling period to 300 ms.
2018-08-27 19:36:54 +02:00
1cdb7a48cb
Show auto deplete only when mmu unit present.
2018-08-27 16:24:21 +02:00
8279aba4d7
Add auto deplete setting.
2018-08-27 16:15:46 +02:00
f02b0d80e3
Split settings menu into separate macros.
2018-08-27 15:48:09 +02:00
2b32b41969
MK2.5 build error hotfix
2018-08-27 05:53:39 +02:00
168bc74102
Merge pull request #1075 from PavelSindler/mmu_filament_sensor
...
Mmu filament sensor
2018-08-27 05:26:12 +02:00
03fffae4c3
finda runout sensor can be turned on/off from menu
2018-08-27 05:20:42 +02:00
c57fdb11b7
show active extruder: numbers corrected
2018-08-26 14:22:52 +02:00
815167c4b6
Merge pull request #1066 from mkbel/fix_linearity_correction_2
...
Fix linearity correction 2
2018-08-25 16:56:40 +02:00
255cd2f34e
Merge pull request #1056 from mkbel/prdel
...
Reserve space for MENU_ITEM_EDIT_int3_P in shared memory
2018-08-25 16:55:56 +02:00
df61172984
Fix linearity correction not saved and applied when menu was left by timeout.
2018-08-24 20:31:49 +02:00
46a3baac57
Add menu_item_edit_P<uint8_t*> specialization to be used for linearity correction. Works well, but costs about 600..700B of FLASH, needs to be optimized.
2018-08-24 20:06:09 +02:00
ac5cb0989e
Uncomment linearity correction menu. Fix return from linearity correction menu.
2018-08-24 16:00:51 +02:00
3780516f74
PFW-512 Reserve space for MENU_ITEM_EDIT_int3_P in shared memory in lcd_tune_menu().
2018-08-22 19:47:29 +02:00
bb5ac93921
Add missing compile time check for ShortTimer fitting into menu_data. Convert preprocessor checks to shorter and more accurate static_assert. Remove redundant macro MENU_DATA_EDIT_SIZE. Decrease scope of menu_stack and asociated macro. No functional change.
2018-08-22 18:55:42 +02:00
dfb4bfac5b
MMU - display status while switching active extruder [PFW-465]
2018-08-22 16:38:34 +02:00
1cd0c6cfea
Status screen - print active MMU exrtuder (1/2 PFW465)
2018-08-20 00:59:36 +02:00
PavelSindler
Marek Bel
PavelSindler
Robert Pelnar
mkbel
MRprusa3d