5004433b20
Fix warning: This is kind of important
...
Again another fix from https://github.com/prusa3d/Prusa-Firmware/pull/138 made by @Thess for the MK2 branch which i think is quite important.
Ardunio IDE 1.8.5 result with Compiler warnings set to "More" or "All"
```
sketch\Marlin_main.cpp:3265:44: warning: the address of 'retracted' will always evaluate as 'true' [-Waddress]
if((echange<-MIN_RETRACT && !retracted) || (echange>MIN_RETRACT && retracted)) { //move appears to be an attempt to retract or recover
^
sketch\Marlin_main.cpp:3265:82: warning: the address of 'retracted' will always evaluate as 'true' [-Waddress]
if((echange<-MIN_RETRACT && !retracted) || (echange>MIN_RETRACT && retracted)) { //move appears to be an attempt to retract or recover
^
sketch\Marlin_main.cpp:3268:28: warning: the address of 'retracted' will always evaluate as 'true' [-Waddress]
retract(!retracted);
^
sketch\Marlin_main.cpp:3870:15: warning: statement has no effect [-Wunused-value]
```
I don't know if that helps making small pull requests as they are easier to review or it would make sense to combine few more.
Prusa should really review this pull [request](https://github.com/prusa3d/Prusa-Firmware/pull/138 ) again for the MK3 branch, as it was one that made warnings disapear in the MK2 branch and made finding new flaws in the code much much easier.
2018-06-01 10:17:03 +02:00
80c641ae5d
Merge pull request #789 from 3d-gussner/MK3_fix4
...
Fixed warning: invalid suffix on literal; C++11 requires a space betw…
2018-05-31 14:09:49 +02:00
eeca0f683b
Fixed warning: invalid suffix on literal; C++11 requires a space between literal and identifier [-Wliteral-suffix]
2018-05-30 16:06:22 +02:00
3bf47d7f83
"run xyz cal first" message
2018-05-30 15:29:59 +02:00
987f8969c0
Merge remote-tracking branch 'upstream/MK3' into temp_cal_coordinates_fix
2018-05-30 15:20:40 +02:00
2561ab9c7d
Merge pull request #786 from XPila/MK3-new_lang
...
Mk3 new lang
2018-05-30 14:54:47 +02:00
dce2d45499
Fixed forgotten comment
2018-05-30 13:35:48 +02:00
4746c77195
New ML support - bootloader support and update proces test
2018-05-29 21:03:47 +02:00
d307868a90
merge with upstream
2018-05-28 20:38:55 +02:00
26724c4a48
removed message
2018-05-28 20:31:57 +02:00
7e79ce8e53
MK3: crash detection for Z axis is active during auto home and mesh bed leveling (normal mode is forced for Z movents); temp cal coordintes corrections; temp cal: xy movents always in safe Z distance from heatbed, Z-axis homing improved
2018-05-28 20:26:15 +02:00
baa66a0887
New ML support - secondary language name, language selection
2018-05-28 17:14:55 +02:00
28a767b460
Merge pull request #760 from PavelSindler/safety_timer_fixes
...
Safety timer not active during filament runout procedure
2018-05-28 13:28:24 +02:00
58ae70c4e1
Merge branch 'MK3' into MK3-new_lang
2018-05-28 13:22:14 +02:00
15207e4d5e
Linearity correction fix - (eeprom storage changed to byte instead of word)
...
+enabled for XYZ axes
2018-05-28 01:47:08 +02:00
55157640c5
New ML support - czech version is working!!!
...
postbuild.sh, make_lang.sh - fixed (id and offset calculation)
language.c, language.h - fixed (==||==)
config.h - reserved space for _SEC_LANG changed
Marlin_main.cpp - debug output + hardcoded lang_select(1) //means cz
2018-05-27 15:14:04 +02:00
2ffb95c72a
bugfix: use absolute coordinates for steel sheet removal position, because there is no homing at the beginning of calibration in case that position is already known
2018-05-24 20:28:00 +02:00
2cf20c8c99
New ML support - migration - fix_source_1.sh script (replace 'MSG_xx' with '_T(MSG_xx)')
...
+ output + fixed source
2018-05-23 16:37:08 +02:00
da3432e237
New ML support - changed _SEC_LANG reserved space to 10kb, added debug code
2018-05-23 16:11:12 +02:00
f00a9ce636
New ML support - language.c, language.h - code fixed, Marlin_main.cpp - debug output
2018-05-23 15:46:08 +02:00
0091b41fb5
Merge pull request #744 from PavelSindler/M860_fix
...
M860 fix: send busy messages
2018-05-23 13:15:46 +02:00
137e1c5027
whitespace
2018-05-22 13:33:31 +02:00
d63a17c696
Safety timer not active during filament runout detection
2018-05-22 13:31:21 +02:00
bd587faab9
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 03:20:03 +02:00
83aa710da6
menu returns corrections
...
Settings::FilamentSensor & FilamentAutoload
removing Calibration::ShowEndStops @ MK3
2018-05-15 20:23:22 +02:00
c59e9bd6be
M860 fix: send busy messages
2018-05-15 18:27:25 +02:00
e8730c2899
Merge branch 'MK3' into read_xyz_cal
...
# Conflicts:
# Firmware/ultralcd.cpp
2018-05-10 18:31:31 +02:00
c359d11858
Do not disable bed heating, when the print is paused.
...
Also remove duplicate handleSafetyTimer() call.
2018-05-04 15:21:22 +02:00
8a92d9b6a3
MaR::180501b
2018-05-02 23:49:21 +02:00
d02333918f
MaR::180501
2018-05-02 22:13:47 +02:00
420d1079af
terminate temperature calibration in case that Z probing function returns false
2018-04-30 17:51:44 +02:00
2a57325bd5
Merge pull request #685 from mkbel/add_safety_timer_notice
...
Show full screen blocking notification message after heater turned off
2018-04-27 17:24:33 +02:00
265d4761a3
M861: steps value for 35C
2018-04-27 17:07:10 +02:00
eced66f0f6
Show full screen blocking notification message after heater turning off by safety timer.
2018-04-27 16:23:20 +02:00
acd308e3d4
safety timer prolonged to 30 minutes
2018-04-27 14:03:09 +02:00
e7cf68e038
whitespace
2018-04-26 19:27:07 +02:00
2dd0d84845
M861: usteps and z_shift variables correction
2018-04-26 19:14:28 +02:00
9c3e0aab36
M861 update: use signed values
2018-04-26 18:55:08 +02:00
ae08788c99
Split lcd_service_mode_show_result screens to separate functions. Make them non blocking. Remove global array distance_from_min, pass it as function return value. Make Support submenus returning to Support menu.
2018-04-26 16:36:02 +02:00
2657d3febd
MK25: SILENT_MODE_NORMAL changed to SILENT_MODE_POWER
2018-04-26 15:12:45 +02:00
9a6cc8a035
Merge pull request #664 from MRprusa3d/MK3
...
Mk3
2018-04-25 22:20:45 +02:00
7e462b3224
Merge branch 'MK3' into MK3
2018-04-25 19:15:36 +00:00
0b6644915a
Add files via upload
2018-04-25 18:47:19 +00:00
d85a8077a8
M115 update
2018-04-25 20:39:10 +02:00
0271ab3643
Meshbedleveling, calibration Z
...
check crash Z (MK3)
check deviation of Z-probe (>50um == error, all printers)
kill with message "debris on nozzle..."
2018-04-25 16:19:16 +02:00
5bb9451b5d
Merge pull request #658 from XPila/MK3-V3_2
...
Meshbedleveling/MK3 - check crash Z after homeaxis (kill with message…
2018-04-24 20:54:53 +02:00
1553e99d8e
Meshbedleveling/MK3 - check crash Z after homeaxis (kill with message "debris on nozzle...")
2018-04-24 20:12:29 +02:00
f9d64bdfb1
Merge pull request #655 from mkbel/fix_z_home_point
...
Fix z home point
2018-04-24 16:51:57 +02:00
79b9f736aa
Merge pull request #657 from PavelSindler/temp_cal_update
...
Temp calibration update
2018-04-24 15:16:13 +02:00
8efe66ef99
remove tab
2018-04-24 14:34:49 +02:00
3d-gussner
XPila
PavelSindler
PavelSindler
MRprusa3d
Marek Bel
MRprusa3d