2447dbc69f
Version changed (3.9.0 build 3421) - sync
2020-05-18 16:56:32 +02:00
285088a715
Version changed (3.9.0 build 3421)
2020-05-18 16:45:18 +02:00
7be713199d
Version changed (3.9.0-RC3 build 3401)
2020-04-28 12:06:13 +02:00
40c052f482
Version changed (3.9.0-RC2 build 3398)
2020-04-24 20:02:13 +02:00
2e18a48b87
Version changed (3.9.0-RC1 build 3272)
2020-02-17 16:47:56 +01:00
4b85664b27
Raise default extruder jerk to 4.5
...
This should be the new default for LA1.5 for direct drive printers and
newer PrusaSlicer profiles too (hopefully).
2020-02-03 15:42:27 +01:00
95a2ad533d
Version changed (3.9.0 build 3175)
2020-01-16 16:03:34 +01:00
42d70f3dea
Merge pull request #1768 from wavexx/unknown_z_improvements
...
"Unknown z" improvements
2019-11-08 14:52:56 +01:00
023ce01f9d
Version 3.8.1 final.
2019-10-24 16:12:46 +02:00
50231b76da
Improved handling of unknown Z position
...
- Introduce raise_z_above to move Z carefully when the current position
is potentially unknown, using stallguard
- Use raise_z_above for:
* filament loading/unloading clearance
* extruder spacing when preheating (to avoid buildplate marks on PEI)
* before homing to avoid damaging the build plate and to avoid
repeated Z moves as well
Since raise_z_above is conditional, it will only raise when needed.
Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
2019-10-22 15:49:10 +02:00
0dde5e3167
Increase version.
2019-10-03 17:37:22 +02:00
4fc4cf9c11
Increase version and commit number.
2019-10-03 17:30:14 +02:00
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu
...
Unify preheat menu, add ASA material
2019-09-12 14:25:38 +02:00
898e85e69f
Merge pull request #2038 from Eriobis/MK3
...
Add a threshold distance to Z calibration
2019-09-10 16:20:24 +02:00
28c1486df2
Update Configuration.h
2019-09-09 02:14:10 +02:00
eec8e5f8c0
Version changed (3.8.0 build 2684)
2019-09-06 19:47:05 +02:00
3f04c4db87
Merge branch 'MK3' into preheat_menu
2019-08-27 22:20:23 +02:00
269aef1696
Remove unused code guarded by WATCH_TEMP_PERIOD macro as most of the functionality is duplicate to what is implemented in temp_runaway_check(). This will release us from porting setWatch() to unified preheat menu and maintaining it.
2019-08-27 20:05:10 +02:00
c27fcf9cff
Increase version to 3.8.0-RC2 and build number to 2639.
2019-08-26 17:03:18 +02:00
2ddbd606f2
Version changed (3.8.0 build 2608)
2019-08-08 16:44:16 +02:00
0422713b29
Merge pull request #2005 from prusa3d/MK3_3.7.2
...
Mk3 3.7.2
2019-07-16 08:50:38 +02:00
98bae7af9f
Merge branch 'MK3' into PFW-873
2019-07-10 16:50:14 +02:00
8229a45187
pre-production version ;-)
2019-07-09 12:16:51 +02:00
a3a7f3106e
print parameters checking
2019-07-03 17:21:11 +02:00
a59e7090ea
Increase version.
2019-06-27 17:32:40 +02:00
fee67d9451
Increase version.
2019-06-13 16:37:51 +02:00
e93f043fee
Increase version 3.7.1 final.
2019-05-13 15:09:58 +02:00
85806a0f38
variable bed pwm frequency fix (input value is 7bit, not 8bit)
2019-05-07 15:35:34 +02:00
58683da2fb
Variable bed PWM resolution/frequency (adjusted to 5bits/32Hz)
2019-05-06 18:07:42 +02:00
a8d8d9e4c9
version change
2019-04-01 20:52:24 +02:00
e37c2e0b2e
version change
2019-03-15 20:01:02 +01:00
7c5e9500a8
version change
2019-03-15 20:00:07 +01:00
f0cc313fed
debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified
2019-03-06 19:56:48 +01:00
22c0d6e230
Merge pull request #1577 from mkbel/add_cut
...
Add MMU cut filament
2019-03-01 14:53:12 +01:00
488497df2c
version change
2019-03-01 13:56:03 +01:00
ca88010018
Revert "version change"
...
This reverts commit f14733f2dd
2019-03-01 13:54:25 +01:00
f14733f2dd
version change
2019-03-01 13:53:18 +01:00
5a5a482a59
Rename preprocessor macro K1 to PID_K1 to avoid future conflict with MMU command.
2019-02-26 13:59:44 +01:00
da28773480
version change
2019-02-21 19:16:24 +01:00
2b6668b853
merge MK3S branch into MK3
2019-02-15 16:42:40 +01:00
4c76393231
version change
2019-02-12 13:44:50 +01:00
62500f0b55
version changed
2019-02-12 10:39:09 +01:00
b85661309f
configuration change
2019-02-11 16:38:36 +01:00
cd692f6be6
version change
2019-02-07 19:43:08 +01:00
065d56b2c6
version change
2019-02-06 23:58:30 +01:00
38b0e5439b
version change
2019-02-06 23:52:24 +01:00
e028db7bf9
version change
2019-02-06 23:30:01 +01:00
8f039263d5
variant files and version
2019-01-28 17:14:24 +01:00
0514306bed
selftest fixed
2019-01-28 11:09:41 +01:00
7e3a1c7d45
merge changes from upstream
2019-01-25 17:57:24 +01:00
54f8f4eb4d
Merge pull request #1460 from MRprusa3d/PFW-723
...
Pfw 723
2019-01-23 14:12:19 +01:00
2c0d62fbf7
PID / manage_heater
...
some small corrections
2019-01-21 18:20:40 +01:00
d9f8e4eb9e
PID / manage_heater
...
PSD regulator improvement
2019-01-17 02:57:08 +01:00
052ae323f8
Merge branch 'MK3' into prusa3d-DEV_MK3
2019-01-15 16:58:36 +01:00
acbfe89f04
version changed
2018-12-19 20:07:18 +01:00
cb334238cc
Slow PWM fan @ 62.5Hz
2018-12-06 15:18:07 +01:00
47d3535012
version change
2018-11-22 23:30:01 +01:00
51c80352e8
version change
2018-11-13 17:48:42 +01:00
10a81ea768
version change
2018-11-09 19:16:53 +01:00
bc247ca02c
MK2.5 sw reset at setup function
2018-10-19 17:54:48 +02:00
b8f92fdfa9
MK2.5 printers set mmu to stealth mode (using Mx code), required mmu2 buildnr can be different for MK2.5 and MK3 printers
2018-10-18 02:44:16 +02:00
436f5b5728
changed version
2018-10-04 17:40:38 +02:00
bba1ffdb65
version change
2018-09-27 21:13:06 +02:00
45066ebddc
lang fix
2018-09-12 09:37:16 +02:00
298950e601
changed version
2018-09-12 09:19:23 +02:00
ed49e5187b
version changed
2018-08-30 11:35:06 +02:00
a11ae18f7e
XYZ calibration fix (progmem constants declaration) + version changed
2018-08-13 14:55:31 +02:00
b7f17292ca
Version changed
2018-08-10 20:08:10 +02:00
c7d7389e27
PowerPanic & Sound
2018-07-23 20:04:47 +02:00
5fd1acaf81
Revert "PowerPanic"
2018-07-20 15:20:57 +02:00
bbec1ccfd4
Add files via upload
2018-07-20 04:34:12 +00:00
a09d44b869
PowerPanic
...
experimental
2018-07-20 04:47:33 +02:00
7bec5c6d5c
Merge branch 'MK3' into MK3-new_lang
2018-07-17 11:47:01 +02:00
fddc02adfa
version changed
2018-07-16 21:01:40 +02:00
268d2634f0
LCD menu optimalization - lcd and menu
...
removed unused code and conditional translation
2018-07-16 02:13:52 +02:00
39bb855333
LCD menu optimalization - menu_item_edit_int3
...
MenuStack removed
FILAMENT_LCD_DISPLAY and ENCODER_STEPS_PER_MENU_ITEM removed (unused)
EXPERIMENTAL_FEATURES menu removed
2018-07-15 18:37:59 +02:00
c8d5648ea8
Version changed
2018-07-02 16:53:10 +02:00
6abde828fa
version changed
2018-06-26 18:53:11 +02:00
a1ea5019dc
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
2018-06-10 16:29:29 +02:00
fcfb4cdcae
New ML support - menu tunning, startup
...
+config headers (bool - true/false replaced with 0/1)
+fixed include hierarchy
+removed comments
2018-06-10 16:04:32 +02:00
5e120e6e52
power panic flow factor hotfix
2018-06-08 18:13:50 +02:00
9104b0601a
power panic: extruder_multipliers added
2018-05-30 18:59:33 +02:00
9b7eeaecaa
version changed
2018-05-18 14:42:35 +02:00
2bfc7475a8
version changed
2018-05-09 18:58:24 +02:00
e1b95ed2a7
version change
2018-04-27 19:59:22 +02:00
5791d9f0d8
EEPROM address conflict fix; forcing selftest can happen only in case that we have TMC2130 drivers
2018-04-18 14:17:28 +02:00
af6c1f8acb
Update version.
2018-04-13 19:53:51 +02:00
92997204a1
Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20
2018-04-03 12:30:35 +02:00
baade7db61
Removed unused files (ST7565R-dogm, digipot)
...
renamed functions digipot_init and digipot_current
fixed cond. trans. (menus)
fixed variant files - MK25, MK3
2018-03-29 23:01:13 +02:00
363a9d24b3
LiquidCrystal class renamed to LiquidCrystal_Prusa
2018-03-29 17:50:43 +02:00
9cb036fbcb
Merge remote-tracking branch 'prusa3d/MK3' into ustep_linearity_2
2018-03-28 19:11:02 +02:00
678cd17e7b
Increase size of EEPROM_TMC2130_WAVE_*_FAC to 16 bits.
2018-03-28 16:13:16 +02:00
4bc1671953
version=3.2.0-alpha buildnumber=370 repository=Unknown
2018-03-14 16:33:50 +01:00
ac1a56b493
Merge branch 'MK25' into MK3
2018-03-13 20:43:19 +01:00
66dc65ecd4
version changed
2018-03-09 14:15:47 +01:00
d512c9c9c2
version changed
2018-03-08 14:48:01 +01:00
b902d91760
changed version
2018-03-07 21:02:07 +01:00
a6f900fd3c
Merge remote-tracking branch 'upstream/MK25' into MK25
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2018-03-06 15:11:50 +01:00
1f2c4fc5ad
version changed
2018-03-01 15:52:53 +01:00
e2b835b881
version change
2018-02-23 17:53:15 +01:00
D.R.racer
DRracer
Yuri D'Elia
Marek Bel
MRprusa3d
Marek Běl
MRprusa3d
Robert Pelnar
PavelSindler
PavelSindler