57be14fca6
Complete all pending moves before restoring a saved print
2019-12-30 13:30:06 +01:00
955c88cf68
Merge pull request #2370 from wavexx/no_resume_while_resuming
...
Do not allow to resume a print twice while waiting for the hotend
2019-12-16 16:26:02 +01:00
348bbbffb0
Do not allow to resume a print twice while waiting for the hotend
...
Clear isPrintPaused just prior to restore_print_from_ram_and_continue.
2019-12-15 22:22:44 +01:00
c122399020
Merge pull request #2270 from leptun/MK3-PFW-1024
...
PFW-1024
2019-12-15 10:25:37 +01:00
d68d9c7fef
Merge pull request #2058 from leptun/MK3_fix_warnings
...
Fix "LANG_MODE 0" warnings
2019-12-15 09:29:27 +01:00
770fcd7c42
Merge branch 'MK3' into MK3-PFW-1024
2019-12-14 10:08:52 +02:00
30cee7afca
Merge pull request #2353 from wavexx/lcd_pause_fixes
...
Fix the LCD pause (regression)
2019-12-13 13:53:29 +01:00
a1bc4cc5dc
Merge pull request #2332 from leptun/MK3_Octoprint_fIxes
...
Do not check for fanError if it is not enabled on resume
2019-12-13 13:47:56 +01:00
063d0421ac
Call long_pause from the main loop (again)
...
After calling stop_and_save_print_to_ram, perform the parking moves
within the main loop as done before PR#1899 to avoid planning within
an interrupted move (which would clear the abort flag too soon).
2019-12-03 20:37:13 +01:00
a413cfbb9a
Merge branch 'MK3' into MK3-PFW-1024
2019-11-29 13:07:45 +02:00
dbe2ed4150
Fix pause/resume when using M25/M601
...
Remove the conflicting and mostly useless card.paused flag (the printing
is either paused, or not) and switch to isPrintPaused only which
accounts for both cases (SD/USB) correctly.
Fix M27/getStatus to show the current real status of the SD print.
Synchronize the queue on M601, as required to precisely pause the print
at the correct instruction.
Alias M25 to M601, which when combined with PR #1899 fixes issue #1614 .
Guard against incorrect usage in M601, M602 and M603.
2019-11-28 17:37:58 +01:00
45b89c5728
Fix typo
2019-11-19 13:55:37 +02:00
e66574ac5f
Updated branch to use TOGGLE
2019-11-19 13:51:10 +02:00
6e2793566c
Merge branch 'MK3' into PFW-943
2019-11-18 14:43:46 +01:00
b077303156
Fix compile error
2019-11-17 11:10:13 +02:00
14104e7bf9
Clear error flag when fanError is disabled
2019-11-17 10:44:11 +02:00
2e0034d915
Update Toggles and Translations
2019-11-17 09:53:14 +02:00
359c447127
Do not check for fanError if it is not enabled on resume
...
Fix typos
2019-11-16 22:44:34 +02:00
07b6173aaa
Merge branch 'MK3' into MK3-PFW-1024
2019-11-16 11:28:29 +02:00
e2e32b455a
Merge pull request #2247 from mkbel/reset_live_Z+offset
...
Show current Z offset in reset dialog before first layer calibration
2019-11-15 17:52:29 +01:00
460f6c3b5e
update message
2019-11-15 17:47:39 +01:00
715794d854
Merge pull request #2092 from leptun/MK3_Translations
...
PFW-1062: Mk3 Toggle and Translations
2019-11-15 16:53:17 +01:00
3a41405f52
Merge pull request #2146 from vintagepc/MK3-2093-sheet-display
...
PFW-1061: #2093 - Relocate sheet menu, show sheet on info screen
2019-11-15 16:07:51 +01:00
f6c35c5d5f
Removed separate fix for #2089
...
Per PR fix request
2019-11-15 08:58:58 -05:00
8fae50ec79
Merge pull request #2315 from mkbel/finda
...
PFW-1047: Show FINDA state as N/A if last received response is older than 1s.
2019-11-15 12:53:01 +01:00
56251c4f99
Merge pull request #1937 from arons/MK3
...
added new function belt test under calibration menu
2019-11-15 09:39:42 +01:00
9e780f0b2b
remove ESC sequence
2019-11-15 09:26:56 +01:00
11428388c6
MBL toggle and cleanup
2019-11-09 20:58:56 +02:00
20a59f5f40
Temp cal.
2019-11-08 19:44:48 +02:00
c82fa07299
Merge pull request #2195 from leptun/MK3-fix-LFN
...
Fix short filenames scrolling in sdprint menu and status screen
2019-11-08 16:52:53 +01:00
ce5efb107a
Merge pull request #2155 from leptun/MK3_SD_scroll_workaround
...
SD Scroll workaround
2019-11-08 16:48:38 +01:00
b33c79e6c7
Merge pull request #1899 from wavexx/fix_lcd_pause_function
...
Fix the LCD pause function
2019-11-08 14:55:13 +01:00
42d70f3dea
Merge pull request #1768 from wavexx/unknown_z_improvements
...
"Unknown z" improvements
2019-11-08 14:52:56 +01:00
1de353dd09
Merge branch 'MK3' into MK3_Translations
2019-11-07 17:02:45 +02:00
3c26f7855b
Merge pull request #1704 from leptun/MK3_Enable_fan_waiting_cooldown
...
Enable print fan while waiting for cooldown
2019-11-04 16:52:26 +01:00
cd5ff783cf
General fixes and improvements to code
2019-10-31 19:07:20 +02:00
76c39ce689
Show FINDA state as N/A if last received response is older than 1s.
2019-10-31 17:45:22 +01:00
1e09f8c003
Wake on certain events
...
EEPROM DIM and BRIGHT values swapped!!!
2019-10-30 21:11:19 +02:00
50231b76da
Improved handling of unknown Z position
...
- Introduce raise_z_above to move Z carefully when the current position
is potentially unknown, using stallguard
- Use raise_z_above for:
* filament loading/unloading clearance
* extruder spacing when preheating (to avoid buildplate marks on PEI)
* before homing to avoid damaging the build plate and to avoid
repeated Z moves as well
Since raise_z_above is conditional, it will only raise when needed.
Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
2019-10-22 15:49:10 +02:00
d32fd1d893
Better EN for new messages
2019-10-22 09:11:47 +02:00
d7b12faa95
Add "Brightness" to Tune menu
2019-10-19 18:45:04 +03:00
0ed4a23ae7
And another compile fix...
2019-10-18 12:42:55 +03:00
9fc42526e7
Backlight always on during calibration
2019-10-18 12:18:43 +03:00
91e94aa0e8
Adjustable timeout
2019-10-18 10:32:41 +03:00
812eafd09c
Fix compile for miniRambo
2019-10-17 13:14:32 +03:00
25e0d23efe
Backlight overhaul and UI changes
2019-10-17 13:11:32 +03:00
04bfe674df
tiny lang fixes, part 1
2019-10-16 16:32:49 +02:00
3b005ae38f
Backlight detection
2019-10-16 14:40:45 +03:00
5a662413e6
Fix compile for printer without backlight support
2019-10-13 14:34:04 +03:00
75f389a71d
Auto-Dimming initial
2019-10-13 14:31:43 +03:00
Yuri D'Elia
DRracer
Alex Voinea
MRprusa3d
vintagepc
Marek Bel