63c0f9ca7f
tset heatbed target temperature to zero at the end of temp. calibrati…
...
…on, before final message is shown
Copied from Pavels Github change
2017-05-19 11:06:52 +02:00
2185f00cbd
Updates to last changes from Pavel
2017-05-18 12:16:39 +02:00
134a50f5b3
messages updated, different bowden lengths for SNMM used, M600 for SNMM updated, stop print for SNMM updated, load all filaments added
2017-05-05 01:29:59 +02:00
df9f063f99
snmm: removed detection if print was terminated by reset/blackout; initial version of stop print for snmm
2017-05-03 16:55:13 +02:00
2fa97d5dfe
Added messages in czech and english for SNMM, service menu for adjusting bowden lengths; updated service menu to be extendable; M600: loading filament for SNMM updated; unload all filaments updated
2017-05-02 19:21:52 +02:00
fa5672564c
Added PID tuning for heated bed
...
- Updated FW_version
- Added PID heated bed tuning
- Default PID bed temp set to 55°C
- Changed PID default cycles from 5 to 8 (most seen in PID tuning
guides)
2017-05-01 01:09:52 +02:00
032f2637a7
adding edits made by akukan
2017-04-30 17:08:00 +02:00
3c0bb7552a
Updates from 3.0.10-10 to 3.0.10-11
2017-04-30 08:38:30 +02:00
32df4f68a1
messages translated, invalidate calibration status at the beginning of temp. calibration
2017-04-28 11:09:32 +02:00
397039270a
PINDA Preheating countdown updated
2017-04-27 14:16:12 +02:00
94b7fb4846
Update to 3.0.10-10 version...
...
Pavel made 25 April 2017
2017-04-26 09:13:23 +02:00
50b7f627cd
pinda preheating messages changed
2017-04-25 22:00:05 +02:00
7e8780ba61
long press compatible with timeout to status, temp compensation extrapolation, preheat Z coordinate added, G75 for showing interpolation table
2017-04-25 11:36:34 +02:00
7ec45271c2
timeout to status, better print time counting when using pause print
2017-04-21 16:29:04 +02:00
b06b985ca7
Merge branch 'MK2' into MK2
2017-04-19 17:48:53 +02:00
c03a18f8c3
czech messages added, temperature calibration is off in fresh eeprom, pinda preheat phase is not used unless calibration was run, pause print works with gcode absolute and relative extruder mode, move z higher after selftest
2017-04-19 16:15:11 +02:00
329e1ac9bb
waiting for PINDA to cool down
2017-04-13 16:51:30 +02:00
4de9b1c9f6
temp calibration on/off initialization when updating firmware
2017-04-13 16:15:34 +02:00
70b6e13de4
farm mode activation and farm number initialization handled when upgrading firmware versions and when flashing to new eeprom
2017-04-13 15:25:56 +02:00
e061209fc2
mesh bed leveling flag
2017-04-10 20:48:44 +02:00
ba36fbbfa3
endif removed
2017-04-10 11:53:20 +02:00
fc221fbea5
Merged PINDA temp calibration branch into MK2
2017-04-10 11:10:03 +02:00
7b962d666f
pause print statistics
2017-04-07 14:56:52 +02:00
2060d319f5
faster load filament, extrusion before unload filament
2017-04-07 12:12:16 +02:00
fab71ff7cf
information that temp calibration active is active is stored to eeprom
2017-04-06 19:56:01 +02:00
ccdf5e9c41
Message that temp calibration has not been run yet is displayed only if temp. calibration is activated
2017-04-06 19:44:03 +02:00
08a59f7fef
status messages for temp calibration added, initial versoin of temp calibration on/off from menu
2017-04-06 18:57:11 +02:00
abadaa5885
added retraction to preheat, no waiting when running mesh bed leveling from calibration menu
2017-04-06 13:14:30 +02:00
762167fb00
Merge remote-tracking branch 'ayourk/MK2' into MK2
2017-03-31 18:49:23 +02:00
6ffc022633
stop print statistics needs to finish, lcd_licked function improved to work with long press button, selftest bug fixed; stop print, pause print and live adjust are hidden in mesh bed leveling and auto home
2017-03-30 16:48:10 +02:00
64f4181451
initial version of long pause
2017-03-28 17:29:10 +02:00
12505d0f4e
button long press activates move Z axis menu, Rx buffer behavior improved when it is full ( #66 )
2017-03-23 15:08:11 +01:00
7daf6b2efd
dont use blocking encoder for button press, lcd_update(false) added to setup function
2017-03-23 14:38:18 +01:00
ed5842d1d1
Rx buffer overflow behavior improved
2017-03-22 18:43:19 +01:00
fb8ba9c151
interrupt dont use, another iteration
2017-03-20 10:34:37 +01:00
31c7469b79
long press init
2017-03-17 10:26:15 +01:00
3017decb9a
fixed undesirable farm mode activation after flashing new firmware
2017-03-15 14:36:58 +01:00
0dee7b78ed
fixed message when serching first point in xyz cal.
2017-03-15 14:06:03 +01:00
7ad319a16a
farm mode: printer sends farm number and status, no ping acoustic allert
2017-03-13 14:40:26 +01:00
608717d110
farm mode: detection if printer is connected to monitoring, PRN1 sends also farm number
2017-03-07 19:19:13 +01:00
f6edfb7c19
farm mode ping
2017-03-06 15:20:24 +01:00
64b9678e6b
G80 - pinda heating and autohome added
2017-03-06 12:14:08 +01:00
7b4c79b4d0
Storing status for pinda probe calibration
2017-03-06 11:19:21 +01:00
d31d73c565
changed eeprom address for temp shift, verbosity level for mesh bed leveling added, added debuging functions for temp calibration
2017-03-03 14:12:37 +01:00
99c201dba2
farm mode disable from menu added, farm number value remains after activating farm mode, wider farm numbers range
2017-03-01 15:34:41 +01:00
fd3bb9c7e5
delay_keep_alive function fixed, induction probe temperature calibration
2017-03-01 11:10:29 +01:00
b189ca8bbd
added comment, removed unused code
2017-02-28 11:01:20 +01:00
c441b4acdb
temp calibration initial version
2017-02-27 17:24:26 +01:00
241e32e691
Fixed "Shift out of range" bug in xyz calibration, status on demand added, temp reading disable in farm mode
2017-02-22 18:00:41 +01:00
590cc8f3e8
German language added, updated spanish language messages, checking if Z live adjust is in allowed range, chcecking for invalid gcodes added, fixed bug in total print time, fixed selftest to avoid false triggering, added auto home after selftest, removed farm mode menu feature, added experimental functions for checking bed properties
2017-02-14 11:52:48 +01:00
3d-gussner
PavelSindler
PavelSindler