45a223a1f9
Remove White spaces
2024-05-20 19:09:03 +02:00
f9bdb8b8aa
Add DEBUG_EEPROM_CHANGES
2024-02-27 08:56:18 +01:00
21faa52aab
Rename axis_steps_per_unit to axis_steps_per_mm
2023-07-25 17:10:44 +02:00
ff1cd2bfb2
dcodes: fix build when DEBUG_DCODES is enabled
2023-07-25 15:02:49 +00:00
5288d615f8
optimisation: lcd avoid streams
...
Author: leptun
Change in memory:
Flash: -124 bytes
SRAM: 0 bytes
2023-07-25 15:02:49 +00:00
b8c1f34e31
Handle CALIBRATION_STATUS_{Z,XYZ}
2022-12-30 14:14:01 +01:00
7fb53899dc
Merge branch 'MK3' into MK3_MMU2_fix1
2022-09-23 14:55:23 +02:00
24b638b5d4
fixed undefined behaviour when left shifting a negative number
2022-09-21 16:21:19 +02:00
329745368e
Improve PAT9125 UI implementation
2022-09-16 10:20:32 +02:00
340bc87110
Checkpoint: jam detection
2022-09-16 10:20:32 +02:00
0933fdb6fe
Merge pull request #3552 from wavexx/temp_model_check
...
Thermal Model protection
2022-08-24 19:16:48 +02:00
68c04ca2f6
Switch a few pointers that don't manipute strings to const
2022-08-06 23:08:03 +02:00
16b9acf8bc
Decouple temperature ISR from ADC readings
...
Read from ADC as fast as possible using the ADC interrupt to get
more accurate instantaneous readings.
Decouple the temperature_isr from the adc reading interval, so that
the two can run independently for future use.
2022-07-25 17:30:21 +02:00
f25bddce35
Simplify GETPC()
2022-02-02 21:06:58 +01:00
31c8e4bc4c
* Remove redundant externs already included with temperature.h
...
* Add ifdefs in Dcodes.cpp when using extern variables
2021-07-20 09:12:14 +02:00
56e531d40a
Improve/fix D23 for M2.5/S printers
...
- Move D23 into it's own function inside Dcodes
- Correctly include a break in the switch statement
- Show the dumper status (enabled/disabled) after toggling
- Allow to generate an immediate dump via g-code using D23 E for
symmetry with D20 E
2021-06-25 08:46:55 +02:00
380e34d481
Include "Dcodes.h" after "Marlin.h" for configuration
...
This is needed in order to get the function prototypes right according
to the actual enabled configuration.
2021-06-25 08:46:55 +02:00
700825ff76
serial_dump: include hex prefix
2021-06-19 13:57:40 +02:00
dd8c6c064c
xfdump: simplify stack debugging (sample pc+sp)
...
Instead of having to guess the PC where the SP was sampled, always take
both. This allows "seamless" stack decoding for both serial and xflash
dumps, since we don't have to guess which function generated the dump.
Make the core functions (doing the sampling) be ``noinline`` as well,
so that they always have valid frame.
2021-06-17 01:29:25 +02:00
a614268c94
serial_dump_and_reset: do not call manage_heater with interrupts disabled
...
Do not call manage_heater() in print_mem() if interrupts are already
disabled. This means we're running inside the crash handler.
2021-06-15 18:44:44 +02:00
d193d0f7ac
serial_dump: manipulate WDT just once
2021-06-15 16:21:56 +02:00
928c7211ad
emergency handlers: always save SP _at_ the crash location
...
Save SP which is closest to the crash location, which simplifies
debugging. For serial_dump, write SP just before the dump.
For xfdump, save SP in the dump header.
This makes xfdump_dump and xfdump_full_dump_and_reset() equivalent for
stack debugging.
2021-06-15 11:47:27 +02:00
7db667ca86
serial_dump_and_reset: turn on print fan while dumping
...
To avoid scorching the sheet while dumping close to the bed.
2021-06-13 22:28:28 +02:00
ea51d65137
serial_dump_and_reset: do not completely disable WDT
...
Set it to 8s which is long enough to complete the dump.
2021-06-12 15:39:37 +02:00
bd57e00448
Implement an online crash dumper for MK2.5 boards
...
When XFLASH is not available, allow users to request _online_ crash
dumps by using D23 (since these require active user cooperation).
Once enabled, instead of just rebooting, dump memory directly to
the serial.
As similarly done with EMERGENCY_DUMP, we have two features that can be
enabled:
EMERGENCY_SERIAL_DUMP: enables dumping on crash after being requested
MENU_SERIAL_DUMP: allow triggering the same manually through the support
menu.
2021-06-12 13:37:20 +02:00
f7dc8dcaef
Fix usage of RAMEND
...
RAMEND is the last valid address, not one-past as I expected it to be...
2021-06-12 13:16:12 +02:00
0a77f2c02d
Dump header as well
2021-06-10 11:58:46 +03:00
094c577e9d
Fix XFLASH_DUMP print_mem
2021-06-09 14:10:20 +03:00
8c3d76f85f
Fix millis reference
2021-06-09 12:44:28 +03:00
378f239ff0
dcode_code: fix inverted define to print larger types
2021-06-08 18:57:16 +02:00
c072fbbf02
Dcodes: fix daddr_t type when only XFLASH_DUMP is enabled
2021-06-08 18:14:49 +02:00
c331c07b16
xfdump: reuse standard definitions for SRAM size/offset
2021-06-08 17:53:06 +02:00
30402e0404
Dcodes: add D20/D21/D22 to generate/read/clear dumps
2021-06-08 15:34:39 +02:00
6dfef76346
xfdump: implement dump-to-xflash functionality
...
Update xflash_layout to include information about the dump, which sits
at the end of xflash.
2021-06-08 15:28:02 +02:00
5ae8bad0ba
Introduce "xflash_layout" to organize XFLASH's content
...
Update the language code to use the new LANG_OFFSET definition
and remove hard-coded flash sizes.
2021-06-08 15:22:37 +02:00
af636c7f2a
Move "xflash" include inside the conditional
2021-06-08 15:18:33 +02:00
0fcdada579
D6: add documentation
2021-06-07 19:58:18 +02:00
ed9f52dd85
D6: also hide declaration behind conditional
2021-06-07 18:50:45 +02:00
db096557d4
D[236]: remove "busy" messages while dumping, avoid WDT
2021-06-07 16:41:25 +02:00
12e124324f
Remove PROGMEM handling from print_mem until D5 uses dcode_core
...
Handling PROGMEM also requires a 32bit address type.
2021-06-07 16:41:25 +02:00
f9371146d0
Implement reading XFLASH with D6
...
This requires expanding the dcode_core address type to 32bit type,
thus enlarges the D2/D3 implementation as a result.
Still allow to save all the original space if D6 is disabled, for now.
2021-06-07 16:41:25 +02:00
915f5a7692
Unify D2 and D3 handling
...
Handle reading/writing memory using the same base functions
in order to save space.
2021-06-07 16:41:25 +02:00
2d25a5705f
Fix D2 to read the entire SRAM content
...
Allow to read up to 0x21ff, which is the last byte of SRAM. Set default
starting address to 0x200, which is the first true byte.
0x0-200 is mapped to register/io space and could cause issues when read
from bi-directional registers.
2021-06-07 16:37:34 +02:00
62f496e1d6
Allow D2 to be enabled selectively
2021-06-07 16:37:34 +02:00
c951bea627
Remove unused/broken bootapp code
2021-03-03 16:31:30 +02:00
da21916473
Change printf_P without format arguments and NL to puts_P only
2021-01-22 18:56:05 +02:00
c710253cca
Code cleanup and size reduction and RAM optimization
...
Replase single character strings with single characters when calling
lcd_print
2021-01-22 17:11:51 +01:00
8d9dc73d1b
Fix compile error
...
fix compile
Fix compile error
2020-08-12 17:25:49 +03:00
5530b99882
Reboot after factory reset
2020-08-12 12:46:35 +03:00
c8f67f2279
Merge pull request #2568 from 3d-gussner/MK3_Dcodes_move
...
D- codes move
2020-04-03 11:12:30 +02:00
3d-gussner
Guðni Már Gilbert
Guðni Már Gilbert
Yuri D'Elia
Alex Voinea
Tom Mittendorf
DRracer
D.R.racer