023ce01f9d
Version 3.8.1 final.
2019-10-24 16:12:46 +02:00
b603528bfd
Merge pull request #2291 from DRracer/lang-381-fixes-4
...
Lang 381 fixes 4
2019-10-23 15:04:39 +02:00
e25befa175
Fix include guard to silence duplicate declaration warnings
2019-10-22 15:49:10 +02:00
50231b76da
Improved handling of unknown Z position
...
- Introduce raise_z_above to move Z carefully when the current position
is potentially unknown, using stallguard
- Use raise_z_above for:
* filament loading/unloading clearance
* extruder spacing when preheating (to avoid buildplate marks on PEI)
* before homing to avoid damaging the build plate and to avoid
repeated Z moves as well
Since raise_z_above is conditional, it will only raise when needed.
Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
2019-10-22 15:49:10 +02:00
d32fd1d893
Better EN for new messages
2019-10-22 09:11:47 +02:00
4943e17bda
Preserve power during PP by turning off backlight
2019-10-19 18:45:31 +03:00
d7b12faa95
Add "Brightness" to Tune menu
2019-10-19 18:45:04 +03:00
0ed4a23ae7
And another compile fix...
2019-10-18 12:42:55 +03:00
9fc42526e7
Backlight always on during calibration
2019-10-18 12:18:43 +03:00
91e94aa0e8
Adjustable timeout
2019-10-18 10:32:41 +03:00
d432c3644d
Enable beeping after fan error is fixed
2019-10-18 09:13:19 +03:00
ea8d9ae49d
Merge branch 'MK3' into MK3_Octoprint_fIxes
2019-10-18 08:45:22 +03:00
ace1d7049a
Reenable command processing when issue is fixed if printer not active
2019-10-17 17:49:15 +03:00
812eafd09c
Fix compile for miniRambo
2019-10-17 13:14:32 +03:00
25e0d23efe
Backlight overhaul and UI changes
2019-10-17 13:11:32 +03:00
04bfe674df
tiny lang fixes, part 1
2019-10-16 16:32:49 +02:00
3b005ae38f
Backlight detection
2019-10-16 14:40:45 +03:00
5a4126e00c
Merge pull request #2263 from leptun/MK3-Fix_PSU_DELTA_SILENT
...
PSU_DELTA fix force_high_power_mode()
2019-10-16 13:22:22 +02:00
7f3ba499a0
Do not wait forever if the heater on the extruder is disabled
2019-10-15 20:54:00 +02:00
5a662413e6
Fix compile for printer without backlight support
2019-10-13 14:34:04 +03:00
75f389a71d
Auto-Dimming initial
2019-10-13 14:31:43 +03:00
b2a1dc6786
Compile fix for firmware without LCD_BL_PIN
2019-10-11 19:23:38 +03:00
68491c9d4d
First implementation
2019-10-11 19:06:37 +03:00
e3ac2e2509
PSU_DELTA fix force_high_power_mode()
2019-10-10 19:01:57 +03:00
219a5e0625
Initialize EEPROM_SILENT in one place both for MK3 and MK25 printers and make it more clear.
2019-10-03 21:25:52 +02:00
0dde5e3167
Increase version.
2019-10-03 17:37:22 +02:00
4fc4cf9c11
Increase version and commit number.
2019-10-03 17:30:14 +02:00
7feb763643
Move check for clear EEPROM just after factory_reset() to ensure nothing is written to EEPROM before check.
...
Fix wizard not starting after Factory RESET / All Data on MK25 printer.
This was broken by:
Author: leptun <voinea.dragos.alexandru@gmail.com>
Date: 3 weeks ago (9/12/2019 6:16:31 AM)
Commit hash: 78708903e8
2019-10-02 18:38:46 +02:00
05e23d1468
Merge branch 'MK3' into MM_lay1_cal
2019-10-01 23:08:11 +02:00
ff7260dc6e
Merge pull request #2246 from mkbel/reset_live_Z
...
Reset live z
2019-10-01 23:02:40 +02:00
74a1c9341b
Revert "Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset."
...
This reverts commit ca9ef3aba1
2019-10-01 22:57:59 +02:00
ca9ef3aba1
Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset.
2019-10-01 22:57:15 +02:00
210d7f6bf1
Merge pull request #2245 from DRracer/knob-long-press
...
Knob long press fixes
2019-10-01 22:33:26 +02:00
087d3cb250
Continue to lcd_v2_calibration() after selection is made in lcd_first_layer_calibration_reset(). Do not ask for selection if sheet is not calibrated, it is calibrated to zero offset or no first layer calibration was ever made.
2019-10-01 21:04:00 +02:00
aabf7655dc
Do all text formatting in first layer calibration reset dialog in one line.
2019-10-01 19:20:36 +02:00
6bd35bfa2f
Increase MENU_DEPTH_MAX to 7 to allow sheet calibration with MMU
2019-10-01 19:43:30 +03:00
7c3f397a62
Print sheet name and Z offset in first layer calibration reset dialog.
2019-10-01 18:22:12 +02:00
b39f09b68e
Merge branch 'MK3' into MM_lay1_cal
2019-10-01 19:20:50 +03:00
d044d3b7b5
Merge pull request #2244 from MRprusa3d/PFW-1008
...
EEPROM_BABYSTEP_Z using removal
2019-10-01 18:04:09 +02:00
f3c3526aa5
fix the knob long-press causing hang in modal dialogs
2019-10-01 17:13:36 +02:00
ed13788e0c
EEPROM_BABYSTEP_Z using removal
2019-10-01 16:57:37 +02:00
9ae75612b5
Fixes after first feature tests
2019-10-01 15:31:01 +02:00
06187f52f3
Merge pull request #2230 from leptun/MK3_Octoprint_fIxes
...
Mk3 Fan error fix
2019-10-01 11:34:55 +02:00
72aed3c544
Allow knob-long-press only in listed menus
2019-10-01 10:51:02 +02:00
543ad6eb41
Ask to reset Z offset before first layer calibration.
2019-09-30 19:58:09 +02:00
9d57f9c365
Fix fan_error_selftest() mistake
2019-09-30 20:30:09 +03:00
61c7479579
Code cleanup: Move texts to messages.c/h
2019-09-30 20:16:01 +03:00
30f325c81d
Extract fan_error_selftest to function for readability
2019-09-30 20:01:31 +03:00
aa50479da5
Merge pull request #2231 from MRprusa3d/PFW-873c
...
default nozzle diameter for farm mode
2019-09-30 18:36:25 +02:00
aba9d1c360
Merge branch 'MK3' into MM_lay1_cal
2019-09-30 18:13:57 +02:00
d31abd4bce
Merge pull request #2240 from leptun/MK3_fix_SD_workDirDepth
...
fix workDirDepth not reset after card init.
2019-09-30 17:32:46 +02:00
bf09eb943d
fix workDirDepth not reset after card init.
2019-09-29 21:09:11 +03:00
8c7015df53
Document set current command.
2019-09-27 15:42:31 +02:00
ff9a6c8177
Prevent fan error while checking fan functionality
2019-09-26 20:52:29 +03:00
dfd3f34351
Check for minimum fan speed. Should be achievable by both fans in 1s.
2019-09-25 22:35:35 +03:00
9c22692827
Fix Cancel Print command processing
2019-09-25 22:34:31 +03:00
4d149f0dfa
Do not send useless keepalive messages after print is canceled from lcd
2019-09-25 18:50:29 +03:00
532d1fc4ae
Fix "Resume Print" missing when doing a normal pause
2019-09-25 18:32:35 +03:00
14b72d2b46
Prevent timeout when printing from SD with USB host connected
2019-09-25 18:12:19 +03:00
c3b7b5ebb5
Check fans before resuming
2019-09-25 15:58:07 +03:00
89de5aac77
default nozzle diameter for farm mode
2019-09-23 17:13:33 +02:00
3c17f7e145
No need to check the fan in the menu
2019-09-22 14:04:58 +03:00
2363f19a62
Minor tweaks for usb printing
2019-09-20 21:07:20 +03:00
139c37c744
allow only one string translation constraint defintion per line
2019-09-20 13:01:07 +02:00
fd01942db8
FAN Error fix - Initial
2019-09-19 20:48:59 +03:00
2afeb65811
return failStatsFmt that fell out in merge
2019-09-19 18:39:25 +02:00
f50cef8361
Merge remote-tracking branch 'upstream/MK3' into translations-doc
...
and resolve ultralcd.cpp conflicts
2019-09-19 18:10:20 +02:00
68359687f8
Merge pull request #2202 from DRracer/lang-381-fixes
...
dialogs' layouts fixes + FR polished
2019-09-19 16:33:26 +02:00
17cca89993
Merge remote-tracking branch 'upstream/MK3' into translations-doc
2019-09-18 15:17:28 +02:00
e7273ea505
Fix [French translation] Wrong display during mesh bed calibration #2218
...
minor code/doc improvements
2019-09-18 12:49:44 +02:00
c1bf4a6288
Merge pull request #2216 from michalrudolf/MK3-miniopravy
...
Mk3 miniopravy
2019-09-18 11:34:17 +02:00
9ff0b7c3a5
Merge pull request #2199 from leptun/MK3_MK2.x_fix_Default_stepper_power
...
Mk3 mk2.x fix default stepper power
2019-09-18 11:05:23 +02:00
19a8537901
Document.
2019-09-17 20:35:18 +02:00
027b6238fd
Mark code unused when PINDA_THERMISTOR is defined by macro. Saves 1B of RAM and 4B of FLASH memory.
2019-09-17 20:26:03 +02:00
966d9baf2b
Document.
2019-09-17 19:00:03 +02:00
14933f6b0e
Fix. Sound [assist], Z-probe [5], menu_fmt_float13off format for last
...
string parameter from PROGMEM
2019-09-17 16:50:51 +02:00
b660cb3908
ultralcd.cpp
2019-09-17 11:46:29 +02:00
77c4720c8b
Merge remote-tracking branch 'upstream/MK3' into translations-doc
2019-09-17 11:32:27 +02:00
b4e0c2f455
Update ultralcd.cpp
...
Menu Support -> XYZ calibration details -> 3. obrazovka "point offset"
X value is no longer moved to the left if there’s no negative sign
2019-09-17 10:51:43 +02:00
c66b4bd876
Do not ask for preheat temperature twice if calibrating first layer from wizard without filament.
2019-09-16 21:14:17 +02:00
e1cfd6dc4f
Remove option to heat nozzle only from mFilamentItem() when activated from wizard, as it has no use after filament unload was removed from wizard.
2019-09-16 18:48:52 +02:00
ff4450489b
Document.
2019-09-16 18:38:44 +02:00
002a7d31a4
Make lcd_wizard() more debug friendly.
2019-09-16 18:31:12 +02:00
b99038736c
Use eeprom_update_byte instead of eeprom_write_byte
2019-09-16 18:22:34 +02:00
d491a9801d
Update ultralcd.cpp
2019-09-16 16:04:45 +02:00
0e1d559f03
Merge branch 'MK3' into PFW-943
2019-09-16 15:29:28 +02:00
011468598e
IR sensor gen. II
...
disconnected PCB detection
2019-09-16 00:43:37 +02:00
695f938348
Fix conversion warnings
2019-09-14 12:24:45 +03:00
e828798209
Fixes after merge and line buffer
...
General fixes to the lcd_edit_off item and improved way to generate the toggles.
The old process is this: Write '>' if required -> print base -> pad everything before the last character with spaces -> write the eol character -> jump back and print the toggle over the blank characters. This resulted in noticeable flickering when the toggle was redrawn and was showing the same thing. Now the process is similar, except that everything happens in a "line buffer" (a char buffer that holds an entire line) and gets printed in one go, avoiding jump instructions for the lcd and prevents flickering since it doesn't write ' ' and the letters afterwards.
This should get even better when the lcd_buffer gets implemented since the line_buffer will get compared to the existing data on the screen and avoid overwriting what is on the lcd with the same thing.
2019-09-13 21:21:42 +03:00
015b34de05
Alert user in wizard about more sheets presets.
2019-09-13 17:09:11 +02:00
4423106fad
dialogs' layouts fixes (support menu dlgs, statistics etc.)
...
French translation polished
2019-09-13 16:55:05 +02:00
e754780717
Fix condition for returning to wizard. eFilamentAction == FilamentAction::Preheat was never true as eFilamentAction is set to eFilamentAction::None in lcd_return_to_status().
2019-09-13 00:19:37 +02:00
f1d190d2d5
Do not ask same filament related question twice if starting first layer calibration from wizard.
2019-09-12 23:41:42 +02:00
ebf405d589
Preselect "yes" for filament question in first layer calibration wizard.
2019-09-12 23:20:03 +02:00
d256c18635
Fix first layer calibration wizard. Do not jump to WizState::LoadFil if calibration is supposed to be performed.
2019-09-12 23:17:19 +02:00
73642632f5
Do not force PLA filament in first layer calibration from wizard. Remove duplicate variable wizard_active. Saves 410 B of FLASH and 1 B of RAM.
2019-09-12 22:37:28 +02:00
07a0f527d8
Reset lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P() also when it times out.
2019-09-12 20:30:27 +02:00
6630591f9e
Consume lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P().
...
This fixes problem encountered in lcd_v2_calibration(). Selected menu item skips to another if returning to menu after this message is used.
2019-09-12 20:20:33 +02:00
d48197656c
Fix lcd_v2_calibration menu not redrawn after full screen message or question.
2019-09-12 20:05:16 +02:00
770e470fd5
Extract common code to function preheat_or_continue(). Saves 138B of FLASH memory.
2019-09-12 18:53:24 +02:00
d80b8280a0
Remove commented out and unused functions prototypes.
2019-09-12 18:41:17 +02:00
3a541488b2
Rename extr_unload_() to mmu_unload_filament() and move it to ultralcd.cpp as it is menu.
2019-09-12 18:40:02 +02:00
0cdfa7a5e8
Remove dead code.
2019-09-12 18:33:02 +02:00
e83b2ebe1f
Rename mFilamentMenu to lcd_generic_preheat_menu to match naming convention for global function and be more descriptive.
2019-09-12 18:15:15 +02:00
c26d7e50f7
Remove redundant lcd_update_enable(true) call.
2019-09-12 18:07:46 +02:00
6674cbf0d7
Select material / temperature before first layer calibration.
2019-09-12 17:54:05 +02:00
ae839aee31
Merge branch 'MK3' into MK3_Translations
2019-09-12 16:28:36 +03:00
6661d3aa45
Merge remote-tracking branch 'prusa3d/MK3' into MM_lay1_cal
2019-09-12 14:28:52 +02:00
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu
...
Unify preheat menu, add ASA material
2019-09-12 14:25:38 +02:00
444daceca3
Move define as requested
2019-09-12 13:39:04 +03:00
78708903e8
Also update eeprom value
2019-09-12 07:16:31 +03:00
43705aae2e
Rename lay1cal_preheat() to lay1cal_wait_preheat().
2019-09-12 00:19:20 +02:00
ae3e6530e6
Do not ask for PLA filament in the beginning of first layer calibration. Do not ask if filament is present if it can be detected by IR sensor.
2019-09-12 00:14:24 +02:00
14dc6b86e0
Change undocumented behaviour of M190 (Wait for bed temperature). Document M190 and M109 (Wait for extruder temperature).
...
Do not remember CooldownNoWait property set by M190 and M109. If M190 was invoked without parameters, CooldownNoWait property was set if it was previously set by "M109 S" or "M109 S" or printer was after power up. Otherwise CooldownNoWait was not set. Now CooldownNoWait is never set if M190 is invoked without parameters.
Saves 44 B of FLASH memory.
2019-09-11 23:37:09 +02:00
acb0341a1f
Do not set temperature in lay1cal_preheat().
2019-09-11 22:42:40 +02:00
bf9f668574
Fix short filenames scrolling in sdprint menu and status screen
2019-09-11 22:04:48 +03:00
608aa6ff3c
Increase number of MMU load tries, so the same number of retries are done without cutter as before enabling cutter.
2019-09-10 18:49:23 +02:00
0fda4e5594
Merge branch 'cut_last_try' into enable_cutter
2019-09-10 18:37:09 +02:00
bb1fb49894
Use MMU cutter only as last resort. Cut filament only before last load retry.
2019-09-10 18:36:14 +02:00
5a1005e143
Merge pull request #2186 from DRracer/enable-fan-pin-test-MK3
...
Enable fan pin test even for MK3
2019-09-10 18:21:17 +02:00
d94356802c
Merge pull request #2187 from prusa3d/MK3_3.8.0
...
Mk3 3.8.0
2019-09-10 18:19:36 +02:00
e1e40213b2
Enable fan pin test even for MK3 (was disabled in 3.7.2 due to lack of
...
FLASH)
2019-09-10 16:49:22 +02:00
898e85e69f
Merge pull request #2038 from Eriobis/MK3
...
Add a threshold distance to Z calibration
2019-09-10 16:20:24 +02:00
76c062b980
Merge pull request #2169 from mkbel/format
...
Use same format for all instances where "ok" is send to serial line.
2019-09-10 14:14:47 +02:00
059c6b6cbf
Merge pull request #2148 from leptun/MK3_MK2.x_fix_Default_stepper_power
...
Mk3 mk2.x fix default stepper power
2019-09-10 14:13:51 +02:00
60de313b8a
Merge pull request #1759 from wavexx/enhanced_longpress
...
Default to "Live Adjust Z" when longpressing during a print (closes #1604 )
2019-09-10 14:13:00 +02:00
f6f8f5b3b6
Merge pull request #2171 from 3d-gussner/patch-3
...
Update reserved space bytes as mentioned in
2019-09-10 14:07:56 +02:00
90f85f7128
Merge pull request #2181 from leptun/MK3_fix_lcd_warning
...
Mk3 fix lcd warning
2019-09-10 14:07:28 +02:00
818befb91b
Fix compile warning
...
function was defined as static in lcd.cpp and redefined in lcd.h
2019-09-09 14:05:20 +03:00
2480bd90fc
Revert lcd_putchar to type int and retrun 0
...
Discussion: https://github.com/prusa3d/Prusa-Firmware/pull/2008#issuecomment-514500738
2019-09-09 13:59:20 +03:00
7cc9fe2e4f
Update 1_75mm_MK3S-EINSy10a-E3Dv6full.h
2019-09-09 02:20:39 +02:00
70de4d58f6
Update 1_75mm_MK3-EINSy10a-E3Dv6full.h
2019-09-09 02:20:14 +02:00
fb561b15ad
Update 1_75mm_MK25S-RAMBo13a-E3Dv6full.h
2019-09-09 02:19:52 +02:00
325e4a3403
Update 1_75mm_MK25S-RAMBo10a-E3Dv6full.h
2019-09-09 02:19:27 +02:00
0b50b2295c
Update 1_75mm_MK25-RAMBo13a-E3Dv6full.h
2019-09-09 02:18:54 +02:00
e581263bf1
Update 1_75mm_MK25-RAMBo10a-E3Dv6full.h
2019-09-09 02:18:22 +02:00
ca6937edaf
Update 1_75mm_MK2-RAMBo13a-E3Dv6full.h
2019-09-09 02:17:42 +02:00
a9a3d9d084
Update 1_75mm_MK2-RAMBo10a-E3Dv6full.h
2019-09-09 02:17:00 +02:00
978ace7fd7
Update Marlin_main.cpp
2019-09-09 02:16:06 +02:00
28c1486df2
Update Configuration.h
2019-09-09 02:14:10 +02:00
eec8e5f8c0
Version changed (3.8.0 build 2684)
2019-09-06 19:47:05 +02:00
d408fd2f42
Update reserved space bytes as mentioned in
...
https://github.com/prusa3d/Prusa-Firmware/pull/2170#pullrequestreview-284810840
2019-09-06 15:54:04 +02:00
3ba2197dd3
more space for the second lang
2019-09-06 08:37:59 +02:00
e73b0a88d5
Use same format for all instances where "ok" is send to serial line.
2019-09-05 22:35:01 +02:00
3a5daf1c64
Change default sheet names.
2019-09-05 17:27:21 +02:00
d51b3d6207
Added doxygen todos for missing LCD layout and positioning
2019-09-01 09:51:51 +02:00
339771a5fb
Fixed info screen when selected_sheet hasn't been initialized.
2019-08-31 21:27:08 -04:00
10cdcb3ae3
SD Scroll workaround
2019-08-31 17:00:39 +03:00
795b1d1cf7
Toggle Sound
2019-08-31 16:56:14 +03:00
2345288d40
Fix the LCD pause function
...
Do not call long_pause recursively!
long_pause() is called before resetting the lcd_command_type. As
long_pause uses st_synchronize() internally, there could be time to
schedule another call to long_pause().
2019-08-31 15:28:31 +02:00
3c4fffef60
Merge branch 'MK3' into MK3_Translations
2019-08-31 15:30:51 +03:00
a5a5f5cf0b
Toggle RPi port
...
Probably works, needs to be tested.
2019-08-31 15:25:00 +03:00
f69035323a
Toggle SD Settings
...
This includes FlashAir support and SD Sorting type
2019-08-31 14:55:51 +03:00
a821002f02
Toggle MMU Mode
2019-08-31 07:38:40 +03:00
d347a36509
Merge branch 'MK3' of https://github.com/prusa3d/Prusa-Firmware into MK3-2093-sheet-display
2019-08-30 19:17:27 -04:00
871e29621f
Fix "stuck" rename cursor
2019-08-30 19:14:22 -04:00
a789a8995f
Merge pull request #2145 from mkbel/fix_sheet_reset
...
Fix sheet reset
2019-08-30 16:49:34 +02:00
6a8330a43b
Toggle "HW Setup"*
...
All toggles from "HW Setup" were changed.
This includes:
-"Nozzle d."
-all "Checks"
Also added an option to provide a string from sram (not from progmem) as the toggle argument. This can be useful when toggling numbers or even when toggling sheets in the future.
2019-08-30 17:36:21 +03:00
865484590b
Change default sheet name from "<number>" to "Sheet <number>".
2019-08-30 16:11:41 +02:00
3d292350d4
Do not activate selected_sheet in lcd_v2_calibration() as this leads to calibrating random sheet if activated from calibration menu.
...
selected_sheet is initialized to 0 and contains index of last Sheet menu visited.
2019-08-30 14:45:25 +02:00
26423f98bc
Switch to next sheet if currently selected sheet is not initialized. Move next_initialized_sheet() and change_sheet_from_menu() to eeprom.cpp, rename it to eeprom_next_initialized_sheet() and eeprom_switch_to_next_sheet(). Rename default_sheet_name() to eeprom_default_sheet_name().
2019-08-30 12:24:13 +02:00
6c78c2fad5
Fix compiler warning.
2019-08-30 12:03:35 +02:00
90e5f14309
Fix compile error on MK3
2019-08-30 13:02:00 +03:00
50a8c16f27
Use EEPROM update instead of write.
2019-08-30 12:00:33 +02:00
56c949b9af
Fix typo
2019-08-30 12:14:43 +03:00
d8d0069f97
Fix MK2.x Default stepper power out of sync
2019-08-30 12:12:29 +03:00
b86a92a7d6
Toggle Mode (stepper power)
2019-08-30 07:59:58 +03:00
8df6691819
Relocate sheet menu, show sheet on info screen
...
-Sheet is shown instead of percentage done either if idle, or during
print preheat.
-Relocated sheet menu to below SD menu for additional visibility to
current sheet.
2019-08-29 18:07:24 -04:00
db6e2e0525
Toggle Crash det.
2019-08-29 22:31:30 +03:00
8c8619be05
Convert reset sheet sub menu to function.
2019-08-29 20:52:53 +02:00
abf84e36f5
Fix sheet menu back caption to Steel sheets to match parent menu caption.
2019-08-29 20:23:02 +02:00
d647cdc02c
Convert sheet switcher from sub menu to function. Handle null characters in sheet name.
2019-08-29 20:13:10 +02:00
cd7805ba46
Document
2019-08-29 18:26:24 +02:00
0b196da6fc
Migrate old vale of EEPROM_BABYSTEP_Z only if active sheet is not initialized.
2019-08-29 18:07:49 +02:00
32f435d1a0
Increase number of configurable steel sheets to 8. Move sheets into sub menu of HW setup.
2019-08-29 17:21:08 +02:00
7f51e0bad8
Move SpoolJoin and Cutter to MSGs
2019-08-29 17:35:26 +03:00
3413d5d486
Merge pull request #2139 from DRracer/assist-mode-fixes
...
Fix sound mode [assist]: encoder clicking indefinitely when MMU wants to
2019-08-29 15:55:49 +02:00
fec92b33ae
Merge pull request #2137 from DRracer/illegal-fat-characters-revised
...
Support for more special characters allowed in file names (^ + = [ ] ;
2019-08-29 15:55:36 +02:00
0b21acec46
Minor fix to Toggle Cutter
2019-08-29 15:49:26 +03:00
d0f9f10ed6
Toggle Cutter
2019-08-29 15:43:41 +03:00
1937cf2074
Toggle SpoolJoin
2019-08-29 15:40:04 +03:00
5eea8d26fe
Merge branch 'MK3' into MK3_Translations
2019-08-29 12:08:48 +03:00
f3bb72be64
Reset calibration status if there is no calibrated sheet after reset.
2019-08-29 03:33:33 +02:00
f64252b59b
Hide sheet switcher from main menu, if there are less than 2 sheets calibrated.
2019-08-28 19:08:53 +02:00
9692f94683
Move sheet menu up to be after Print from SD.
2019-08-28 19:01:48 +02:00
3903dc819a
Extract function next_initialized_sheet from change_sheet_from_menu(). Make it more general to depend on sizeof(Sheets::s) instead of hard coded value of 2.
2019-08-28 18:59:48 +02:00
33675c6d1e
Change default sheet names.
2019-08-28 18:16:35 +02:00
49bc11037c
Remove statements with no effect.
2019-08-28 18:14:10 +02:00
1d23cc52e9
endstop sound alert fixes
2019-08-28 09:39:28 +02:00
29c8cb2927
Fix bad merge.
2019-08-27 22:22:36 +02:00
3f04c4db87
Merge branch 'MK3' into preheat_menu
2019-08-27 22:20:23 +02:00
07169ad84a
Make file local variable static.
2019-08-27 20:48:53 +02:00
e57fcc04a7
Fix compiler warnings.
2019-08-27 20:23:48 +02:00
d927d5b05d
Port wizard_active to mFilamentItem().
2019-08-27 20:19:03 +02:00
cef7f31b9f
Set FilamentAction to None if mFilamentMenu left by cooldown or menu back action.
2019-08-27 20:13:55 +02:00
ffc5a64154
Remove commented out code.
2019-08-27 20:06:48 +02:00
269aef1696
Remove unused code guarded by WATCH_TEMP_PERIOD macro as most of the functionality is duplicate to what is implemented in temp_runaway_check(). This will release us from porting setWatch() to unified preheat menu and maintaining it.
2019-08-27 20:05:10 +02:00
1a1be5c518
Fix sound mode [assist]: encoder clicking indefinitely when MMU wants to
...
select filament
2019-08-27 17:10:29 +02:00
bf2097342d
Add ASA preheat into mFilamentMenu();
2019-08-27 17:01:41 +02:00
11ce786aaa
Support for more special characters allowed in file names (^ + = [ ] ;
...
,)
2019-08-27 13:47:58 +02:00
Marek Bel
XPila
Yuri D'Elia
DRracer
leptun
Marek Běl
MRprusa3d
D.R.racer
michalrudolf
MRprusa3d
3d-gussner
vintagepc