73642632f5
Do not force PLA filament in first layer calibration from wizard. Remove duplicate variable wizard_active. Saves 410 B of FLASH and 1 B of RAM.
2019-09-12 22:37:28 +02:00
07a0f527d8
Reset lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P() also when it times out.
2019-09-12 20:30:27 +02:00
6630591f9e
Consume lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P().
...
This fixes problem encountered in lcd_v2_calibration(). Selected menu item skips to another if returning to menu after this message is used.
2019-09-12 20:20:33 +02:00
d48197656c
Fix lcd_v2_calibration menu not redrawn after full screen message or question.
2019-09-12 20:05:16 +02:00
770e470fd5
Extract common code to function preheat_or_continue(). Saves 138B of FLASH memory.
2019-09-12 18:53:24 +02:00
d80b8280a0
Remove commented out and unused functions prototypes.
2019-09-12 18:41:17 +02:00
3a541488b2
Rename extr_unload_() to mmu_unload_filament() and move it to ultralcd.cpp as it is menu.
2019-09-12 18:40:02 +02:00
0cdfa7a5e8
Remove dead code.
2019-09-12 18:33:02 +02:00
e83b2ebe1f
Rename mFilamentMenu to lcd_generic_preheat_menu to match naming convention for global function and be more descriptive.
2019-09-12 18:15:15 +02:00
c26d7e50f7
Remove redundant lcd_update_enable(true) call.
2019-09-12 18:07:46 +02:00
6674cbf0d7
Select material / temperature before first layer calibration.
2019-09-12 17:54:05 +02:00
6661d3aa45
Merge remote-tracking branch 'prusa3d/MK3' into MM_lay1_cal
2019-09-12 14:28:52 +02:00
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu
...
Unify preheat menu, add ASA material
2019-09-12 14:25:38 +02:00
444daceca3
Move define as requested
2019-09-12 13:39:04 +03:00
78708903e8
Also update eeprom value
2019-09-12 07:16:31 +03:00
43705aae2e
Rename lay1cal_preheat() to lay1cal_wait_preheat().
2019-09-12 00:19:20 +02:00
ae3e6530e6
Do not ask for PLA filament in the beginning of first layer calibration. Do not ask if filament is present if it can be detected by IR sensor.
2019-09-12 00:14:24 +02:00
14dc6b86e0
Change undocumented behaviour of M190 (Wait for bed temperature). Document M190 and M109 (Wait for extruder temperature).
...
Do not remember CooldownNoWait property set by M190 and M109. If M190 was invoked without parameters, CooldownNoWait property was set if it was previously set by "M109 S" or "M109 S" or printer was after power up. Otherwise CooldownNoWait was not set. Now CooldownNoWait is never set if M190 is invoked without parameters.
Saves 44 B of FLASH memory.
2019-09-11 23:37:09 +02:00
acb0341a1f
Do not set temperature in lay1cal_preheat().
2019-09-11 22:42:40 +02:00
5a1005e143
Merge pull request #2186 from DRracer/enable-fan-pin-test-MK3
...
Enable fan pin test even for MK3
2019-09-10 18:21:17 +02:00
d94356802c
Merge pull request #2187 from prusa3d/MK3_3.8.0
...
Mk3 3.8.0
2019-09-10 18:19:36 +02:00
e1e40213b2
Enable fan pin test even for MK3 (was disabled in 3.7.2 due to lack of
...
FLASH)
2019-09-10 16:49:22 +02:00
898e85e69f
Merge pull request #2038 from Eriobis/MK3
...
Add a threshold distance to Z calibration
2019-09-10 16:20:24 +02:00
76c062b980
Merge pull request #2169 from mkbel/format
...
Use same format for all instances where "ok" is send to serial line.
2019-09-10 14:14:47 +02:00
059c6b6cbf
Merge pull request #2148 from leptun/MK3_MK2.x_fix_Default_stepper_power
...
Mk3 mk2.x fix default stepper power
2019-09-10 14:13:51 +02:00
60de313b8a
Merge pull request #1759 from wavexx/enhanced_longpress
...
Default to "Live Adjust Z" when longpressing during a print (closes #1604 )
2019-09-10 14:13:00 +02:00
f6f8f5b3b6
Merge pull request #2171 from 3d-gussner/patch-3
...
Update reserved space bytes as mentioned in
2019-09-10 14:07:56 +02:00
90f85f7128
Merge pull request #2181 from leptun/MK3_fix_lcd_warning
...
Mk3 fix lcd warning
2019-09-10 14:07:28 +02:00
818befb91b
Fix compile warning
...
function was defined as static in lcd.cpp and redefined in lcd.h
2019-09-09 14:05:20 +03:00
2480bd90fc
Revert lcd_putchar to type int and retrun 0
...
Discussion: https://github.com/prusa3d/Prusa-Firmware/pull/2008#issuecomment-514500738
2019-09-09 13:59:20 +03:00
7cc9fe2e4f
Update 1_75mm_MK3S-EINSy10a-E3Dv6full.h
2019-09-09 02:20:39 +02:00
70de4d58f6
Update 1_75mm_MK3-EINSy10a-E3Dv6full.h
2019-09-09 02:20:14 +02:00
fb561b15ad
Update 1_75mm_MK25S-RAMBo13a-E3Dv6full.h
2019-09-09 02:19:52 +02:00
325e4a3403
Update 1_75mm_MK25S-RAMBo10a-E3Dv6full.h
2019-09-09 02:19:27 +02:00
0b50b2295c
Update 1_75mm_MK25-RAMBo13a-E3Dv6full.h
2019-09-09 02:18:54 +02:00
e581263bf1
Update 1_75mm_MK25-RAMBo10a-E3Dv6full.h
2019-09-09 02:18:22 +02:00
ca6937edaf
Update 1_75mm_MK2-RAMBo13a-E3Dv6full.h
2019-09-09 02:17:42 +02:00
a9a3d9d084
Update 1_75mm_MK2-RAMBo10a-E3Dv6full.h
2019-09-09 02:17:00 +02:00
978ace7fd7
Update Marlin_main.cpp
2019-09-09 02:16:06 +02:00
28c1486df2
Update Configuration.h
2019-09-09 02:14:10 +02:00
eec8e5f8c0
Version changed (3.8.0 build 2684)
2019-09-06 19:47:05 +02:00
d408fd2f42
Update reserved space bytes as mentioned in
...
https://github.com/prusa3d/Prusa-Firmware/pull/2170#pullrequestreview-284810840
2019-09-06 15:54:04 +02:00
3ba2197dd3
more space for the second lang
2019-09-06 08:37:59 +02:00
e73b0a88d5
Use same format for all instances where "ok" is send to serial line.
2019-09-05 22:35:01 +02:00
3a5daf1c64
Change default sheet names.
2019-09-05 17:27:21 +02:00
d51b3d6207
Added doxygen todos for missing LCD layout and positioning
2019-09-01 09:51:51 +02:00
a789a8995f
Merge pull request #2145 from mkbel/fix_sheet_reset
...
Fix sheet reset
2019-08-30 16:49:34 +02:00
865484590b
Change default sheet name from "<number>" to "Sheet <number>".
2019-08-30 16:11:41 +02:00
3d292350d4
Do not activate selected_sheet in lcd_v2_calibration() as this leads to calibrating random sheet if activated from calibration menu.
...
selected_sheet is initialized to 0 and contains index of last Sheet menu visited.
2019-08-30 14:45:25 +02:00
26423f98bc
Switch to next sheet if currently selected sheet is not initialized. Move next_initialized_sheet() and change_sheet_from_menu() to eeprom.cpp, rename it to eeprom_next_initialized_sheet() and eeprom_switch_to_next_sheet(). Rename default_sheet_name() to eeprom_default_sheet_name().
2019-08-30 12:24:13 +02:00
6c78c2fad5
Fix compiler warning.
2019-08-30 12:03:35 +02:00
90e5f14309
Fix compile error on MK3
2019-08-30 13:02:00 +03:00
50a8c16f27
Use EEPROM update instead of write.
2019-08-30 12:00:33 +02:00
56c949b9af
Fix typo
2019-08-30 12:14:43 +03:00
d8d0069f97
Fix MK2.x Default stepper power out of sync
2019-08-30 12:12:29 +03:00
8c8619be05
Convert reset sheet sub menu to function.
2019-08-29 20:52:53 +02:00
abf84e36f5
Fix sheet menu back caption to Steel sheets to match parent menu caption.
2019-08-29 20:23:02 +02:00
d647cdc02c
Convert sheet switcher from sub menu to function. Handle null characters in sheet name.
2019-08-29 20:13:10 +02:00
cd7805ba46
Document
2019-08-29 18:26:24 +02:00
0b196da6fc
Migrate old vale of EEPROM_BABYSTEP_Z only if active sheet is not initialized.
2019-08-29 18:07:49 +02:00
32f435d1a0
Increase number of configurable steel sheets to 8. Move sheets into sub menu of HW setup.
2019-08-29 17:21:08 +02:00
3413d5d486
Merge pull request #2139 from DRracer/assist-mode-fixes
...
Fix sound mode [assist]: encoder clicking indefinitely when MMU wants to
2019-08-29 15:55:49 +02:00
fec92b33ae
Merge pull request #2137 from DRracer/illegal-fat-characters-revised
...
Support for more special characters allowed in file names (^ + = [ ] ;
2019-08-29 15:55:36 +02:00
f3bb72be64
Reset calibration status if there is no calibrated sheet after reset.
2019-08-29 03:33:33 +02:00
f64252b59b
Hide sheet switcher from main menu, if there are less than 2 sheets calibrated.
2019-08-28 19:08:53 +02:00
9692f94683
Move sheet menu up to be after Print from SD.
2019-08-28 19:01:48 +02:00
3903dc819a
Extract function next_initialized_sheet from change_sheet_from_menu(). Make it more general to depend on sizeof(Sheets::s) instead of hard coded value of 2.
2019-08-28 18:59:48 +02:00
33675c6d1e
Change default sheet names.
2019-08-28 18:16:35 +02:00
49bc11037c
Remove statements with no effect.
2019-08-28 18:14:10 +02:00
1d23cc52e9
endstop sound alert fixes
2019-08-28 09:39:28 +02:00
29c8cb2927
Fix bad merge.
2019-08-27 22:22:36 +02:00
3f04c4db87
Merge branch 'MK3' into preheat_menu
2019-08-27 22:20:23 +02:00
07169ad84a
Make file local variable static.
2019-08-27 20:48:53 +02:00
e57fcc04a7
Fix compiler warnings.
2019-08-27 20:23:48 +02:00
d927d5b05d
Port wizard_active to mFilamentItem().
2019-08-27 20:19:03 +02:00
cef7f31b9f
Set FilamentAction to None if mFilamentMenu left by cooldown or menu back action.
2019-08-27 20:13:55 +02:00
ffc5a64154
Remove commented out code.
2019-08-27 20:06:48 +02:00
269aef1696
Remove unused code guarded by WATCH_TEMP_PERIOD macro as most of the functionality is duplicate to what is implemented in temp_runaway_check(). This will release us from porting setWatch() to unified preheat menu and maintaining it.
2019-08-27 20:05:10 +02:00
1a1be5c518
Fix sound mode [assist]: encoder clicking indefinitely when MMU wants to
...
select filament
2019-08-27 17:10:29 +02:00
bf2097342d
Add ASA preheat into mFilamentMenu();
2019-08-27 17:01:41 +02:00
11ce786aaa
Support for more special characters allowed in file names (^ + = [ ] ;
...
,)
2019-08-27 13:47:58 +02:00
6aaa40b9a3
Merge pull request #2134 from mkbel/fix_power_panic
...
Fix repeated power panic restarted print from beginning or jumped at …
2019-08-27 08:13:26 +02:00
a1e68c3d7f
Merge pull request #2135 from prusa3d/MK3_3.8.0
...
Increase version to 3.8.0-RC2 and build number to 2639.
2019-08-27 08:12:27 +02:00
3da43ae8c2
Do not port print fan preheat speed preset, as it was never used. And it was broken until recently fixed when adding ASA profile.
2019-08-26 21:14:07 +02:00
4792559536
Add farm preheat items. Add setWatch() call.
2019-08-26 21:00:30 +02:00
aa13f9e809
Fix formatting.
2019-08-26 20:19:34 +02:00
668e89e5a9
Preheat menu: Add ASA, hide menu item back when in wizard.
2019-08-26 20:18:34 +02:00
52ae62bbba
Fix formatting.
2019-08-26 20:14:00 +02:00
3628d893ee
Remove duplicate preheat menu.
...
Known limitations: farm_mode missing, wizard_active missing, cooldown missing, ASA missing, print fan missing.
2019-08-26 20:11:52 +02:00
b9b0d6049e
Fix formatting.
2019-08-26 19:48:39 +02:00
159a1a70d8
Update documentation.
2019-08-26 17:19:57 +02:00
c27fcf9cff
Increase version to 3.8.0-RC2 and build number to 2639.
2019-08-26 17:03:18 +02:00
52cb37770b
Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card.
...
As sdpos_atomic was not updated after printer power up and first power panic recovery, it was equal 0. When the first command from SD card was queued its size on SD card was computed as current SD index position minus sdpos_atomic. This was equal to offset from beginning of the file limited to 16 bit storage type. When next power outage occurred earlier then this command was finished and wiped out of queue, this command size (extraordinarily big) was subtracted from sdpos_atomic and saved to EEPROM. This led to up to 65536 B jump back in file printed after next power panic recovery.
2019-08-23 19:30:20 +02:00
3eb36ca194
Fix cmdqueue_dump_to_serial.
...
Header was historically made bigger to contain size of the command on SD card, but those debug functions wasn't updated.
2019-08-23 16:48:30 +02:00
5bb510dd2a
Merge pull request #2129 from DRracer/bed-noise-performance
...
Improve performance of bed PWM automaton
2019-08-22 14:45:01 +02:00
c6df3fe012
Merge pull request #2127 from DRracer/code-size-reduction-1
...
Code size reduced by almost 5KB
2019-08-22 14:25:23 +02:00
d3123a74b0
Updated LCD menu documentation to new form/syntax
2019-08-22 04:58:16 +02:00
514b062107
Added `lcd_menu` format description
...
Added some documentation how the LCD menus look like and added max character values for translations.
There are more things needed and also the placement in the code is an open task. Depending on the decision if we use `messages.c/h`
2019-08-21 10:28:28 +02:00
a7c2aec04c
Code size reduced by almost 5KB
2019-08-21 09:59:51 +02:00
3ed6d0637c
Re-enable tmc2130_sg_stop_on_crash only if crash detection enabled from menu.
...
This fixes bug, that disabling crash detection from menu doesn't work during recovery from crash detection.
2019-08-20 19:32:39 +02:00
Marek Bel
DRracer
leptun
Marek Běl
MRprusa3d
3d-gussner
XPila