255db28684
merge unit test and upstream changes
2019-07-17 10:30:49 +02:00
3a87ff56f6
Default to "Move Z" above a certain height even when printing
...
This speeds-up the ability to manually get the carriage out of the way
just after a print has finished
2019-07-16 22:04:32 +02:00
034cbff10a
GUI updates
2019-07-16 20:10:49 +02:00
1dab0f7a04
Merge pull request #2008 from leptun/MK3_LCD_improvements
...
Lcd optimization - 1K of flash saved
2019-07-16 19:15:57 +02:00
0422713b29
Merge pull request #2005 from prusa3d/MK3_3.7.2
...
Mk3 3.7.2
2019-07-16 08:50:38 +02:00
8b1c687629
Lcd optimization - 1K of flash saved
2019-07-15 20:32:58 +03:00
8fb30f886a
octoprint stop fix
2019-07-15 14:30:21 +02:00
a3fde091ab
More than 7.5KB saved by slight refactoring of printing to serial line
2019-07-12 10:10:56 +02:00
b8b167d1ca
Merge branch 'MK3' into MK3_Enable_fan_waiting_cooldown
2019-07-10 19:26:43 +03:00
d3dd0ad271
Merge pull request #1952 from NotaRobotexe/sound
...
new sound
2019-07-10 18:06:32 +02:00
98bae7af9f
Merge branch 'MK3' into PFW-873
2019-07-10 16:50:14 +02:00
3333d937ed
some improvements
2019-07-10 16:29:40 +02:00
4d535f1217
... incl. SupportMenu ;-P
2019-07-09 12:31:20 +02:00
8229a45187
pre-production version ;-)
2019-07-09 12:16:51 +02:00
61566f7fb1
Move translated string MSG_V2_CALIBRATION from untranslated section to PROGMEM_I1, add missing ISTR macro. Revert _T(MSG_SELECT) and _T(MSG_RENAME) to _i("Select") and _i("Rename") as it is preferred macro for internationalized strings. Use MSG_V2_CALIBRATION in both occurrences.
2019-07-08 21:18:55 +02:00
a1a8945bee
more code editing
2019-07-04 15:31:44 +02:00
e77898d5dc
code edit
2019-07-04 13:21:27 +02:00
81b3b71cca
check eeprom inicialization
2019-07-03 19:37:11 +02:00
a3a7f3106e
print parameters checking
2019-07-03 17:21:11 +02:00
d344e514c4
Rename functions and macro to match with naming convention - remove 'P' where there is no pointer to progmem.
2019-06-26 15:51:58 +02:00
d879794922
Remove first parameter of macro menu_format_sheet_P_E, of function menu_format_sheet_P_E and menu_item_submenu_P as it was always called with the same parameter. Saves 66B of FLASH.
2019-06-26 15:47:06 +02:00
53dbcdd852
Display sheet name when adjusting Z. Costs 130B of flash.
2019-06-26 15:33:54 +02:00
4a16fe6902
Save z_offset, bed_temp and pinda_temp with sheet calibration.
2019-06-26 14:10:12 +02:00
20dd1110f6
Remove unused parameters of function _lcd_babystep(int axis, chonst char *msg).
...
Saves 24B of flash memory.
2019-06-25 19:43:10 +02:00
ebdeb99134
Add menu to show sheet live adjust Z value.
2019-06-25 18:55:25 +02:00
3e9dc91cef
ifdef for mk2
2019-06-24 18:01:49 +02:00
b5168bd6c2
fan error fix
2019-06-24 17:30:56 +02:00
b67ec501b4
Add rename sheet menu.
2019-06-24 17:11:13 +02:00
e6fbac08ed
Move sheet selector to submenu.
2019-06-21 15:44:56 +02:00
0a48082609
Add steel sheet profile selector.
2019-06-20 16:40:53 +02:00
9a904362e5
code only for TMC2130
2019-06-20 10:17:48 +02:00
e54497d802
added new function belt test under calibration menu
2019-06-20 00:09:55 +02:00
524121141a
Remove commented out code. This code is of unknown genesis and purpose. It was added in commit "3.0.10 sync" two years ago and it was already commented out in that moment.
2019-06-19 15:54:24 +02:00
24cec4091b
Merge branch 'MK3' into sound
2019-06-17 17:28:19 +02:00
aff020a6d4
Merge pull request #1897 from NotaRobotexe/farm_mode
...
PFW-571 send PRN:4 instead PRN:1, PFW-874 new firmware version alert with 30s timeout
2019-06-14 20:05:30 +02:00
367a28a5a8
Default to "Live Adjust Z" when longpressing during a print ( closes #1604 )
...
- Disable longpress action when homing or calibrating
- Default to Live Adjust during a print
- Retain "Move Z" otherwise
2019-06-14 11:44:06 +02:00
d81970dd3d
Merge branch 'MK3' into MK3_Enable_fan_waiting_cooldown
2019-06-14 11:07:08 +03:00
6717590631
Merge branch 'MK3' into MK3_LA15
2019-06-13 15:39:50 +02:00
72f5e87c61
Merge branch 'MK3' into use_enum_class_2
2019-06-12 19:17:35 +02:00
1390d4e5b9
Use first letter capital camel case for enum class members. Change underlying type to uint_least8_t.
2019-06-12 19:11:41 +02:00
5fcf760954
Use first letter capital camel case for enum class members. Rename CustomMsgTypes to CustomMsg. Remove unnecessary maping to numbers. Change underlying type to uint_least8_t.
2019-06-12 18:54:43 +02:00
51df6cdfdc
Remove LcdCommands::Unknown3. Remove LcdCommands mapping to numbers, as it is not needed.
2019-06-12 18:54:37 +02:00
cbb92860d0
Use first letter capital camel case for enum class members.
2019-06-12 18:54:32 +02:00
0401490cc1
Use first letter capital camel case for enum class members.
2019-06-12 18:54:25 +02:00
9ceba00426
Use first letter capital camel case for enum class members. Remove dependency of FanCheck values on TestError values as it is not used.
2019-06-12 18:53:09 +02:00
b7d3766ae2
Merge branch 'MK3' into PFW-790
2019-06-12 17:32:13 +02:00
6dd085bcc5
Use first letter capital camel case for enum class members.
2019-06-12 16:44:07 +02:00
cc80bfa020
Merge branch 'MK3' into use_enum_class
2019-06-12 16:04:26 +02:00
c7e1e73880
another almost 200B down by proper usage of smaller data types and enum
...
classes
2019-06-12 15:41:55 +02:00
94a5175980
Code size reduction - saved almost 2KB
2019-06-12 15:41:34 +02:00
49f172a7b9
Convert uint8_t cycle control varibles changed in previous commit to uint_least8_t to be potentially more portable.
2019-06-12 15:01:57 +02:00
b15bbaf177
for cycles' variables: int -> uint8_t where appropriate, part1
2019-06-12 14:58:15 +02:00
4f8ed7f123
for cycles' variables: int -> uint8_t where appropriate, part1
2019-06-12 10:31:09 +02:00
baa36ce740
another almost 200B down by proper usage of smaller data types and enum
...
classes
2019-06-12 09:58:42 +02:00
d528a53526
Refactor. Move lcd_commands_func1() to first_lay_cal.cpp and rename it to lay1cal_square(). Remove its constant parameters. Move remaining G1 code to lay1cal_meander(). Saves 6B of FLASH memory.
2019-06-12 01:36:48 +02:00
60cc3d58ec
Use sprintf_P in first layer calibration. Save 30B of FLASH memory.
2019-06-11 20:00:49 +02:00
47a183e96e
Use loop to enquecommand_P() in first layer calibration. Save 126B of FLASH memory.
2019-06-11 19:49:56 +02:00
21f4669600
Make count_e() constexpr.
2019-06-11 19:22:08 +02:00
4effff9e99
Use loop to enquecommand_P() in first layer calibration. Save 10B FLASH memory.
2019-06-11 18:56:29 +02:00
d21f256cd0
Remove duplicate calls of lcd_timeoutToStatus.start(), move !blocks_queued() && cmd_buffer_empty() condition to outer if, rewrite using switch statement. Save 487B of FLASH memory.
2019-06-11 18:26:59 +02:00
97a5d6b5f4
Make constants const.
2019-06-11 17:30:37 +02:00
9b1e3213ae
Variable lcd_commands_step doesn't need to be global.
2019-06-11 17:30:19 +02:00
58948cffcd
Code size reduction - saved almost 2KB
2019-06-11 17:23:01 +02:00
0c9121e99e
Use loop to enquecommand_P() in first layer calibration.
2019-06-11 17:08:56 +02:00
f20125a3e2
Code size reduction - saved almost 2KB
2019-06-11 16:24:40 +02:00
27145204ed
Use internationalized M117, but anyway the text is not shown.
2019-06-10 21:40:12 +02:00
4be8fa701e
Use loop to enquecommand_P() in first layer calibration.
2019-06-10 20:41:18 +02:00
c40e3b550d
Remove stubs and live K by default
2019-06-10 19:34:00 +02:00
bb980e2fca
sound edit, delete mute mode, add blind mode
2019-06-10 15:03:52 +02:00
28e7772421
Merge pull request #1886 from leptun/MK3_fix_load_filament_5
...
Fix Load Filament 5 for MMU2
2019-06-10 14:45:55 +02:00
ebfad55617
Merge pull request #1888 from mkbel/always_cut_independent
...
Always cut independent
2019-05-31 07:00:37 +02:00
ccb649b1f6
Add always cut experimental / for testing feature.
2019-05-30 23:03:59 +02:00
18122049a6
Fix cut filament menu item labels.
2019-05-30 19:36:10 +02:00
878e866401
Fix Load Filament 5 for MMU2
2019-05-30 17:28:02 +03:00
3b2cbc68d8
PFW-571 send PRN:4 instead PRN:1 while changing filament
2019-05-28 18:22:34 +02:00
a742afcebd
Remove version check
2019-05-26 22:43:06 +02:00
4772532524
Allow Live-K to be used on stock 3.7.1 using a stub
2019-05-26 22:14:31 +02:00
daa8007de5
Allow to exclude Live K from the build
2019-05-26 16:41:45 +02:00
0a26de1e7f
Allow to live-tune K during a print
2019-05-25 18:41:21 +02:00
9cb0bc7bcf
Fix MINTEMP errors and fsensor runout
2019-05-24 08:46:44 +02:00
e17f3f8405
change language files accordingly
2019-05-23 11:14:26 +02:00
da98977de3
Fix. menu texts and formatting - issues PFW-877 and PFW-879
2019-05-23 10:45:55 +02:00
15ba17f110
Fix translator columns hint for Adjusting Z:
2019-05-16 17:30:15 +02:00
a453c6fc9d
Save 236B by improving functions in menu.cpp. Beware - the label now has
...
to come with a ':' as its last character. Changed language files along
with this commit too.
2019-05-16 16:43:44 +02:00
ebfc8c1c79
Fan autotest for swapping in Selftest
2019-05-15 10:10:46 +02:00
c851e158cc
Manual fan check menu have default (selected) option
2019-05-15 10:10:46 +02:00
66d20f0297
Fix code formatting (indentation).
2019-05-14 16:45:15 +02:00
4de93ca19c
Fix eject filament menu items numbering.
2019-05-14 16:43:33 +02:00
150787efbd
Generate menu item texts Cut filament <nr.> during runtime to conserve flash.
2019-05-14 16:25:29 +02:00
7c4f66181f
Generate menu item texts Load filament <nr.> and Eject filament <nr.> during runtime to conserve flash.
2019-05-14 15:47:25 +02:00
084c6f2700
Merge pull request #1805 from DRracer/MK3
...
PFW-844
2019-05-10 13:41:59 +00:00
5707d4b85c
Set all target hot ends to 0 deg. Celsius instead of just hotend nr. 0 to be more safe with custom modifications.
2019-05-10 15:27:25 +02:00
f431d24762
Merge branch 'MK3' of https://github.com/DRracer/Prusa-Firmware into MK3
2019-05-07 16:17:14 +02:00
0124fbf9ee
Fix: display target extruder temperature on the main screen when doing
...
PID calibration
2019-05-07 16:15:42 +02:00
b7fe43bf68
Deleted bad cols/rows definitions for translation.
2019-05-07 12:52:23 +02:00
1a0370e1c7
Make macro ON_MENU_LEAVE() usage similar to macros MENU_ITEM_BACK_P() and MENU_ITEM_FUNCTION_P().
2019-05-06 17:39:00 +02:00
ffbdb43881
Remove commented code
2019-05-06 17:26:42 +02:00
0794430208
Fix for linearity correction not being stored to EEPROM when doing MENU-
...
UP
2019-05-06 15:33:13 +02:00
b93f37ee02
"stop" immediately after "pause" patch
2019-04-29 14:39:19 +02:00
32f3471862
print parameters checking
...
prusa_stat_diameter()
2019-04-09 15:22:08 +02:00
173062295f
Enable print fan while waiting for cooldown
2019-04-06 13:42:21 +03:00
fd96bde69f
Merge pull request #1667 from mkbel/Add_IR_sensor_fail_message
...
Add ir sensor fail message
2019-04-02 14:55:27 +02:00
ae11c1e26f
rename function
2019-03-28 16:39:56 +01:00
97594c83bb
function misleading names changed
2019-03-28 14:58:58 +01:00
1dd486d86d
max length of menu item strings added
2019-03-28 13:18:28 +01:00
d22793f276
Z-probe nr. states reduced to 1; 3; 5
2019-03-28 12:02:46 +01:00
02faadf0b9
MMU mode renamed
2019-03-28 09:49:08 +01:00
baeee5817e
Make lcd_selftest_error() calls safer, as nullptr parameter is not handled. It is hard to believe, but it actually saves 4B flash.
2019-03-22 00:24:22 +01:00
966e772702
Fix compile error for non TMC2130 endstops check.
2019-03-22 00:14:29 +01:00
89f1a3bacf
Fix compile error for non TMC2130 pulley check.
2019-03-22 00:11:02 +01:00
8582babddb
Fix compile error for manual fan check.
2019-03-22 00:08:44 +01:00
d1c5c03907
Fix compile error for manual fan check.
2019-03-22 00:03:14 +01:00
c45a7f8641
Fix 1_75mm_MK3-EINSy10a-E3Dv6full variant build error.
2019-03-21 23:50:01 +01:00
91779a5d04
Add filament sensor false triggering message.
2019-03-21 23:36:59 +01:00
ba23b1b2c5
Remove unused.
2019-03-21 22:50:46 +01:00
6c28ed6349
Convert lcd_selftest_error() first parameter to enum class.
2019-03-21 22:48:57 +01:00
7d98177716
farmMode updates
2019-03-19 19:48:40 +01:00
c05561d6b1
Merge pull request #1607 from PavelSindler/7x7
...
7x7 mbl and switching mmu modes
2019-03-15 19:55:15 +01:00
ffe45bdef3
Disable mmu filament cutter feature.
2019-03-15 03:38:37 +01:00
9e0e4198c5
Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update
2019-03-14 01:52:44 +01:00
1f131f66e0
print parameters checking
...
nozzle diameter
2019-03-14 00:36:56 +01:00
32138ea09a
menu item alignment
2019-03-13 15:08:09 +01:00
b20d9171b6
Merge remote-tracking branch 'upstream/MK3' into 7x7
2019-03-12 11:47:17 +01:00
42036270cf
Merge pull request #1619 from MRprusa3d/PFW-795d
...
better autoLoad II
2019-03-12 11:44:30 +01:00
c55f42965d
Merge pull request #1601 from MRprusa3d/PFW-749
...
SD card menu enhancement
2019-03-12 11:42:53 +01:00
c9cff11732
Merge pull request #1593 from MRprusa3d/PFW-647
...
mode switching, G-code unification
2019-03-12 11:40:43 +01:00
3388444b6c
better autoLoad II
...
autoLoad inhibit if Support::ExtruderInfo(@MKx)/SensorInfo(@MKxS)-menu is selected
2019-03-11 20:43:07 +01:00
698f81abe0
fix compile error
2019-03-11 15:55:48 +01:00
819a91ab1e
switching stealth/normal mode for mmu in settings menu and tune menu
2019-03-11 12:33:22 +01:00
141b78c048
number of Z-probes defualt value changed from 4 to 3, mmu stealth mode switch in settings menu
2019-03-10 16:03:46 +01:00
091934462d
menu correction
2019-03-08 20:06:30 +01:00
315959c13a
menu update
2019-03-08 20:03:23 +01:00
6a864ffbab
G80 parameters configurable via settings menu
2019-03-08 15:43:37 +01:00
98bb2b7acf
merge debug gcodes for bed analysis
2019-03-06 20:45:23 +01:00
2a71dbefb8
Merge pull request #1597 from mkbel/fix_compiler__warning
...
Fix compiler warning
2019-03-06 19:55:18 +01:00
6217329d50
SD card menu enhancement
2019-03-06 19:51:26 +01:00
101453b674
mbl submenu
2019-03-06 13:27:31 +01:00
1eab058ad4
Fix uninitialized variable used.
2019-03-05 18:08:35 +01:00
7fcecabd5f
Fix compiler warning: variable 'previous_millis_cmd' set but not used
2019-03-05 18:04:58 +01:00
484259cbb2
Fix compiler warning: 'lcd_settings_linearity_correction_menu_save' defined but not used
2019-03-05 18:00:16 +01:00
f1031d2302
new farm statuses for pause (14) and wait for user (15)
2019-03-05 16:00:50 +01:00
7e48d633cb
mode switching
...
info-message viewing during mode switching
2019-03-04 21:30:36 +01:00
9dde8c4732
Merge pull request #1591 from MRprusa3d/PFW-795c
...
better autoLoad
2019-03-04 15:31:04 +01:00
1051b7c39f
Merge pull request #1583 from mkbel/fix_cut
...
Fix unable to cut filament, if nozzle is already preheated.
2019-03-04 15:29:54 +01:00
b02ca18c93
better autoLoad
...
autoLoad inhibit if Support::ExtruderInfo-menu is selected
2019-03-04 12:52:35 +01:00
9e38b1e101
Add missing message "Preheating to cut".
2019-03-01 18:17:08 +01:00
6437d44991
Fix unable to cut filament, if nozzle is already preheated.
2019-03-01 18:10:06 +01:00
83e07b5cdf
Fix compiler warnings:
...
sketch/ultralcd.cpp: In function 'void mFilamentPrompt()':
sketch/ultralcd.cpp:2335:7: warning: enumeration value 'e_FILAMENT_ACTION_none' not handled in switch [-Wswitch]
switch(eFilamentAction)
^
sketch/ultralcd.cpp:2335:7: warning: enumeration value 'e_FILAMENT_ACTION_mmuCut' not handled in switch [-Wswitch]
sketch/ultralcd.cpp:2359:12: warning: enumeration value 'e_FILAMENT_ACTION_none' not handled in switch [-Wswitch]
switch(eFilamentAction)
^
sketch/ultralcd.cpp:2359:12: warning: enumeration value 'e_FILAMENT_ACTION_mmuLoad' not handled in switch [-Wswitch]
sketch/ultralcd.cpp:2359:12: warning: enumeration value 'e_FILAMENT_ACTION_mmuUnLoad' not handled in switch [-Wswitch]
sketch/ultralcd.cpp:2359:12: warning: enumeration value 'e_FILAMENT_ACTION_mmuEject' not handled in switch [-Wswitch]
sketch/ultralcd.cpp:2359:12: warning: enumeration value 'e_FILAMENT_ACTION_mmuCut' not handled in switch [-Wswitch]
sketch/ultralcd.cpp: In function 'void mFilamentItem(uint16_t, uint16_t)':
sketch/ultralcd.cpp:2513:12: warning: enumeration value 'e_FILAMENT_ACTION_none' not handled in switch [-Wswitch]
switch(eFilamentAction)
^
sketch/ultralcd.cpp:2513:12: warning: enumeration value 'e_FILAMENT_ACTION_mmuCut' not handled in switch [-Wswitch]
sketch/ultralcd.cpp:2562:12: warning: enumeration value 'e_FILAMENT_ACTION_none' not handled in switch [-Wswitch]
switch(eFilamentAction)
^
sketch/ultralcd.cpp:2562:12: warning: enumeration value 'e_FILAMENT_ACTION_mmuCut' not handled in switch [-Wswitch]
2019-03-01 18:07:19 +01:00
824d11e4b0
Remove "Press the knob to eject filament" message, as it is never shown.
2019-03-01 17:43:28 +01:00
57cf7ee171
Fix compiler warning: 'lcd_selftest_fsensor' defined but not used
2019-03-01 17:21:13 +01:00
4c2d4fcf77
Fix compiler warning ultralcd.cpp:4038:10: warning: unused variable 'chars
2019-03-01 17:18:05 +01:00
85c208f9f4
Merge branch 'MK3' into bad_load_cut
2019-03-01 14:55:55 +01:00
22c0d6e230
Merge pull request #1577 from mkbel/add_cut
...
Add MMU cut filament
2019-03-01 14:53:12 +01:00
e27fdafcec
menu switch - initial
2019-02-28 19:42:09 +01:00
2a005caf42
Add cutter enable to tune menu.
2019-02-27 17:47:51 +01:00
02a692c5d9
Store cutter enable state in EEPROM.
2019-02-27 17:34:03 +01:00
4a4eb9962c
Cut filament when cutter is enabled and MMU load fails.
2019-02-27 10:42:26 +01:00
49b1d1cb93
Move prototype to header file.
2019-02-26 18:50:15 +01:00
815231bc26
Add MMU cut filament menu.
2019-02-26 17:58:00 +01:00
ff35119ef3
preHeat @ filament management
...
another funcionality III / autoLoad
2019-02-26 17:33:37 +01:00
7a1b47c340
Convert functions mmu_eject_fil_0 to mmu_eject_fil_4 to template function.
2019-02-26 11:11:05 +01:00
34e2495487
Convert mmu_load_to_nozzle_0 to mmu_load_to_nozzle_4 to template.
2019-02-26 10:32:10 +01:00
be0ed46335
preHeat @ filament management
...
another funcionality III
2019-02-22 03:09:50 +01:00
323071f50a
preHeat @ filament management
...
another funcionality II
2019-02-21 13:20:29 +01:00
a54c68b874
preHeat @ filament management
...
another funcionality II
2019-02-21 04:45:44 +01:00
da0867cfc5
preHeat @ filament management
...
another funcionality
2019-02-20 03:01:33 +01:00
11d19879fc
Merge pull request #1533 from MRprusa3d/PFW-210
...
preHeat @ filament load / unload / autoLoad / MMU
2019-02-15 17:45:38 +01:00
0c1f9b5100
preHeat @ filament management
...
target temperature keeping
2019-02-15 02:25:44 +01:00
80c3420a12
Merge branch 'MK3' into PFW-210
2019-02-14 00:05:50 +01:00
ef1f82627e
preHeat @ filament load / unload / autoLoad / MMU
...
MMU options added
2019-02-13 23:53:00 +01:00
9e873ac0f7
Use enum for mmu_cmd instead of plain integer type.
2019-02-13 01:51:39 +01:00
e432e258dc
extr fan RPM measuring fix
2019-02-06 22:56:10 +01:00
22217a42f7
message change
2019-02-06 21:37:39 +01:00
726d5aa3c3
typo fixed
2019-02-06 16:29:10 +01:00
2fe8e0670a
MK2 build fail fixed
2019-02-06 16:15:19 +01:00
ef86c78f25
menu item text changed
2019-02-06 14:24:47 +01:00
1ba046395e
fan measurements fix: keep fanSpeedSoftPwm = 255 during measurements, selftest changes
2019-02-06 12:37:18 +01:00
860e6f9994
Merge remote-tracking branch 'upstream/MK3' into variants
2019-02-06 09:19:38 +01:00
fcb7dd90cf
Merge pull request #1505 from MRprusa3d/PFW-210
...
preHeat @ filament load / unload / autoLoad
2019-02-06 09:14:03 +01:00
a53d150903
preHeat @ filament load / unload / autoLoad
...
autoLoad option added
2019-02-06 01:58:05 +01:00
f9298b37b8
fan check hotfix (selftest, measuring RPM, fan errors)
2019-02-05 04:02:38 +01:00
9a51a7be29
Merge branch 'bed_correction_fix' into variants
2019-02-04 12:47:06 +01:00
0853ef5d06
Merge remote-tracking branch 'upstream/MK3' into variants
2019-02-04 12:45:28 +01:00
b4f2dc3b5e
Merge remote-tracking branch 'robert/MK3-variants' into variants
2019-02-04 12:41:08 +01:00
6d5a2ae816
Merge pull request #1499 from MRprusa3d/PFW-210
...
preHeat @ filament load / unload
2019-02-04 12:37:42 +01:00
d2a4cb4c49
Use _delay_ms instead of delay (fix - fast scrolling in sd card menu - temporary solution)
2019-02-04 12:20:07 +01:00
fff8fc8a48
preHeat @ filament load / unload
...
filament-list correction (PET missing)
2019-02-04 12:12:35 +01:00
3244c37435
Conditional translation for fan control (FAN_SOFT_PWM), temporary disabled lcd backlight control
2019-02-04 01:32:04 +01:00
5324181bf7
maximum bed level correction value enlarged from 50um to 100um and is now used in menus and mesh bed leveling itself
2019-02-03 20:56:14 +01:00
4444b155f1
M600: prevention of blob; massage changed when autoload is active
2019-02-01 21:08:34 +01:00
97aaf919a3
Merge remote-tracking branch 'upstream/MK3' into dev
2019-02-01 18:12:59 +01:00
79449a8eaf
Conditional translation for fan control (FAN_SOFT_PWM), temporary disabled lcd backlight control
2019-02-01 13:29:50 +01:00
4f67a9569c
dont show filament sensor in extruder info menu
2019-01-31 18:03:56 +01:00
6342b6032c
Merge remote-tracking branch 'upstream/MK3' into variants
2019-01-31 10:18:41 +01:00
491dbf5ebd
Merge pull request #1493 from MRprusa3d/PFW-210
...
preHeat @ filament load / unload
2019-01-31 10:15:59 +01:00
921b6993ee
preHeat @ filament load / unload
2019-01-31 05:21:53 +01:00
9926468c91
Merge remote-tracking branch 'upstream/MK3' into variants
2019-01-30 17:26:45 +01:00
19fd05bb46
Merge pull request #1490 from PavelSindler/menu_update
...
menu update
2019-01-29 13:29:27 +01:00
1fa9913029
include printers.h
2019-01-28 21:54:44 +01:00
220437316b
Merge pull request #1485 from XPila/MK3-bed_fast_pwm
...
Mk3 bed fast pwm
2019-01-28 21:14:01 +01:00
29e156b26d
printer types updated
2019-01-28 19:48:46 +01:00
25d54d43aa
menu update
2019-01-28 19:41:02 +01:00
dd4d8e1277
calibrate z endstop update
2019-01-28 19:23:19 +01:00
0514306bed
selftest fixed
2019-01-28 11:09:41 +01:00
7889305702
merging changes from upstream
2019-01-28 11:00:42 +01:00
c6e6df404c
Merge pull request #1482 from mkbel/IR_fsens_selftest
...
Ir fsens selftest
2019-01-28 10:39:12 +01:00
eea755496b
Conditional translation for SYSTEM_TIMER_2 because we want to have posibility to switch between old/new implementation.
...
Timing functions (millis, micros and delay) replaced in whole source, defined in Marlin.h.
This commit enables original implementation (SYSTEM_TIMER_2 undefined)
Verified with passed complete wizard process.
2019-01-27 22:48:51 +01:00
434a723151
Timing functions 'micros' and 'delay' replaced in whole source with 'micros2' and 'delay2'
2019-01-27 17:37:27 +01:00
aaa2670ef8
Remove redundant enum numbering.
2019-01-25 20:14:29 +01:00
b167896c6d
Convert lcd_selftest_screen parameter int _step to enum class testScreen screen.
2019-01-25 20:00:12 +01:00
6d1256eaad
Internationalize "Calibrating home".
2019-01-25 18:06:30 +01:00
6b6a3d7d5f
MMU_IR_SENSOR_PIN -> IR_SENSOR_PIN
2019-01-25 18:01:17 +01:00
7e3a1c7d45
merge changes from upstream
2019-01-25 17:57:24 +01:00
0d1a7a1774
Merge pull request #1479 from MRprusa3d/PFW-749
...
SD card menu
2019-01-25 14:32:12 +01:00
edc412697c
Increase selftest_irsensor() filament nozzle unload temperature to ABS.
...
Resume nozzle temperature immediately after unload.
2019-01-24 21:24:46 +01:00
68ffa95aa9
Fix axis self-test progress visualization.
2019-01-24 21:06:03 +01:00
1c4f3259ea
Increase heater check minimum expected temperature rises.
...
Bed increased from 3 to 10 K.
Nozzle increased from 10 to 30 K.
Measured rises with my MK3 printer:
Bed 26K,
Nozzle 73K.
2019-01-24 21:02:04 +01:00
305598d7f6
Fix bed / nozzle test order and progress bar.
...
Known limitation:
Z progress shown in bed progress.
2019-01-24 20:03:37 +01:00
22859800f0
Rearrange tests. Move hot end test to the end, to spare time in IR sensor test.
...
Known problems, hot end and bed is swapped. Bed progress indicator is painted to X axis test.
2019-01-24 19:22:36 +01:00
b2b65475df
SD card menu
...
SDcard-menu after card insertion
2019-01-24 17:32:57 +01:00
ad65024147
selftest: filament sensor check change
2019-01-24 13:57:52 +01:00
e0c1e4a02d
version which should on all printer versions: autoload, selftest, filament detection, filament sensors initialization, filament menus
2019-01-24 01:12:30 +01:00
1d71c1a5d1
Update IR sensor selftest progress bar more frequently.
2019-01-22 19:02:42 +01:00
97a4623800
Fix lcd_selftest_screen for small _progress_scale.
2019-01-22 19:01:55 +01:00
9cda0b69b8
Update IR sensor selftest progress bar.
2019-01-22 18:23:00 +01:00
3ff8a7c740
Unload filament by MMU unit in selftest_irsensor().
...
Known limitation:
If filament was not loaded to nozzle it is sticked completely out of MMU. To be fixed in MMU, as this problem can be reproduced also from printer menu - unload filament.
2019-01-22 14:54:06 +01:00
c371a5ea65
Document.
2019-01-22 14:05:08 +01:00
a92d9c782b
Add IR sensor test.
2019-01-22 11:29:55 +01:00
f292a6ca7a
Refactor filament sensor selftest call.
2019-01-21 21:39:38 +01:00
e36e58f385
show sensor on/off temporarily changed to unlocalized strings
2018-12-21 21:28:57 +01:00
ba57986b72
merge changes from upstream
2018-12-21 20:58:38 +01:00
5462d451e1
show power failures in fail stats menu, shorter load to nozzle if idler sensor detected
2018-12-21 20:56:45 +01:00
d292e877df
load to nozzle shortened, sensor menu moved to support
2018-12-21 18:51:13 +01:00
3c64bad1cb
initial version which works on old and new hw, initial version of idler sensor detection
2018-12-21 17:12:16 +01:00
b0fce9122e
Merge pull request #1416 from PavelSindler/z_cal_endstops
...
Z cal endstops and stop paused print fix
2018-12-19 19:46:27 +01:00
40fe52202d
stop paused print fix: saved_printing set to false when doing stop print
2018-12-19 19:20:09 +01:00
b5430c2968
M600: consume click
2018-12-18 19:10:02 +01:00
880163dbcb
missing prototypes
2018-12-18 17:38:24 +01:00
fc5d7e35ef
fail stats mmu function definitions
2018-12-18 17:35:41 +01:00
11ab5dfd36
fail stats menu for mmu defined for MK2.5 version
2018-12-18 17:33:27 +01:00
cb1f6d2a0e
show sensor states in calibration menu
2018-12-14 19:43:26 +01:00
e0bed71801
comments update
2018-12-13 17:01:45 +01:00
bbba27c15f
idler state menu
2018-12-13 16:53:59 +01:00
a9829b6a1a
add statistics and idler sensor state
2018-12-13 00:12:00 +01:00
29ecd4ec7a
duplicit T-codes execution improved, E-stepper movements when waiting for ok from mmu, continue loading function improved, eeprom: fail stats for mmu
2018-12-12 22:32:47 +01:00
c256af0a1c
unknown filament added; the same T-code will be not executed twice in a row; continue loading
2018-12-12 14:50:55 +01:00
8af127870d
consume click
2018-12-11 15:59:44 +01:00
6d6de67c3f
consume click
2018-12-07 18:31:30 +01:00
0ceeba38cb
Lang - text "Copy selected language from XFLASH?" shorted to "Copy selected language?"
2018-11-22 17:32:53 +01:00
37273d9fca
Lang - 'Auto Deplete' changed to 'SpoolJoin'
2018-11-22 17:19:38 +01:00
f0624a9e97
Lang - some not localized texts marked as localized, formating fixed
2018-11-22 14:37:29 +01:00
32da5bc039
progress bar time counted from feedrate and E - distance
2018-11-12 19:55:53 +01:00
f4c1e7924f
M600: show progress bar during first filament load
2018-11-12 18:35:06 +01:00
5931d15566
whitespace
2018-11-09 18:31:28 +01:00
c991c8b314
resume print fix: wait for heater() never disable steppers
2018-11-09 18:29:35 +01:00
22cf2c6b6b
M600 load messages synchronization fixed
2018-11-09 15:31:44 +01:00
02e31433f4
PFW-634 Move T<nr> code just before extrude code to properly load filament in first layer calibration with MMUv2.
2018-11-06 15:46:37 +01:00
908fffc19a
Merge pull request #1306 from PavelSindler/fsensor_q
...
filament quality measurements disabled
2018-11-05 19:14:34 +01:00
89ad02ac8c
filament quality measurements disabled
2018-11-05 18:37:36 +01:00
50f9bf06be
Save 74B of flash memory.
2018-11-05 18:02:46 +01:00
e95c2ad592
Display auto deplete as not available if filament sensor is disabled.
2018-11-05 17:43:07 +01:00
ef5be690fb
Add autodeplete setting into tune menu.
2018-11-05 13:54:22 +01:00
78775e2f87
Merge pull request #1302 from PavelSindler/wizard_improvements
...
Wizard improvements
2018-11-05 10:38:41 +01:00
688c10247e
Merge pull request #1291 from XPila/MK3-new_bs
...
lang update
2018-11-05 10:38:29 +01:00
0a2ad97bc6
Merge pull request #1290 from PavelSindler/mmu_improvements
...
mmu improvements: load to nozzle, gcodes for single material mode, M600 fix
2018-11-05 10:38:05 +01:00
3d24f5437c
leave Z move menu (hotfix)
2018-11-04 23:44:29 +01:00
daef0eeb67
Merge pull request #1297 from MRprusa3d/PFW-635
...
MeshBed Leveling Fail
2018-11-04 23:33:29 +01:00
e177c2b669
Merge pull request #1295 from PavelSindler/feedrate_change
...
choosing filament from T? menu changes feedrate fixed
2018-11-04 23:13:03 +01:00
8afb83406e
Wizard for assembled printers (contains more steps now)
2018-11-04 23:08:23 +01:00
33a29cd416
Fix PFW638 - remaining/elapsed time >100h displayed in hours
2018-11-04 20:27:09 +01:00
e2d2fb58aa
Z calibraion: always ask user to clean nozzle
2018-11-04 18:47:08 +01:00
73794b56cf
MeshBed Leveling Fail
...
Z-leveling after MeshBed leveling failing
2018-11-02 23:03:14 +01:00
e304319e15
choosing filament from T? menu changes feedrate fixed
2018-11-02 20:25:24 +01:00
18a8ae5b8f
Bed PowerMonitor
...
bed power monitoring correction
2018-11-01 20:55:42 +01:00
aaf65051f9
M600: "is color clear?" menu synchronization
2018-11-01 18:28:52 +01:00
96ce324b7c
load to nozzle improved, unified feedrate and E-distance for final feed used in load filament function, M600 etc.
2018-11-01 16:29:09 +01:00
a0e4acead3
lang - removed unused code and some service messages changed to "not translated"
2018-11-01 14:07:16 +01:00
e80af46503
load to nozzle and Tx and Tc codes: intial version
2018-10-31 21:48:05 +01:00
a9317b4d36
upstream/MK3 merge
2018-10-25 21:46:32 +02:00
a6a81c6ea6
mmu2: filament senor (FINDA) can be switched ON/OFF from menu without dependency on pat9125 state
2018-10-25 18:26:26 +02:00
940f436a5f
merge MK3_dev into MK3
2018-10-22 20:25:29 +02:00
1585dc66b0
Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500
...
Known limitation: Unable to compile.
2018-10-08 15:58:49 +02:00
f9d8c46802
Enable/disable optical quality meassurement in settings menu
2018-10-04 15:48:28 +02:00
e50025cc7d
static_assert - portable solution compatible with C++98
2018-09-27 19:59:29 +02:00
3f28632443
Use cs.axis_steps_per_unit from ConfigurationStore.
2018-09-24 14:54:41 +02:00
2607a0c4ed
Update documentation.
2018-09-19 17:22:06 +02:00
b92b307ee8
Make variables constant.
2018-09-19 17:21:45 +02:00
cce8131070
Add missing s for seconds of print time.
2018-09-19 17:20:41 +02:00
b5bb40474d
Fix print time overflow.
2018-09-19 17:17:32 +02:00
96aada9061
load filament messages, czech language missing translation readded
2018-09-11 18:25:38 +02:00
25a46557d1
merge with upstream
2018-09-10 22:11:32 +02:00
8a9f066c1b
choose_extruder_menu: extruder -> filament
2018-09-10 22:09:37 +02:00
6fa798aa83
init
2018-09-10 20:08:13 +02:00
1253fb338a
wizard hotfix
2018-09-10 18:02:54 +02:00
5a6ef00cfc
Do not unload filament from nozzle when touching bed in the end of first layer calibration. Unload it after reaching home position.
2018-09-07 10:50:23 +02:00
35cf3f3a61
Time info
...
suffix for doubt time estimation (i.e. if feed rate changed)
2018-09-04 14:39:46 +02:00
12b1769531
Fix printer reset when changing filament during print over USB.
2018-08-30 16:02:13 +02:00
25a22120fb
1-st Layer Calibration correction
...
filament loading improvement
2018-08-30 03:32:33 +02:00
515e78cfd1
Eject filament feature in menu, M600: if it was envoked by FINDA, eject filament
2018-08-29 01:58:28 +02:00
b9808354c4
Merge remote-tracking branch 'upstream/MK3' into M600_change_extruder
2018-08-28 23:53:35 +02:00
705f098b1c
eject filament: initial version
2018-08-28 23:50:31 +02:00
d3869bd857
Z-endstop @ MK3
...
add show P.I.N.D.A. state menu item @ CalibrationMenu
2018-08-28 16:12:59 +02:00
3e2cb72695
Merge branch 'MK3' into auto_deplete_2
2018-08-28 11:01:30 +02:00
72cd0d26f9
Increase scope of code disabled by macro TMC2130 to whole lcd_settings_linearity_correction_menu.
2018-08-27 21:08:40 +02:00
b08ae95568
Rename autoDeplete to lcd_autoDeplete and make it global. When filament runs out, call M600 AUTO if lcd_autoDeplete is enabled. Shorten finda polling period to 300 ms.
2018-08-27 19:36:54 +02:00
1cdb7a48cb
Show auto deplete only when mmu unit present.
2018-08-27 16:24:21 +02:00
8279aba4d7
Add auto deplete setting.
2018-08-27 16:15:46 +02:00
f02b0d80e3
Split settings menu into separate macros.
2018-08-27 15:48:09 +02:00
2b32b41969
MK2.5 build error hotfix
2018-08-27 05:53:39 +02:00
168bc74102
Merge pull request #1075 from PavelSindler/mmu_filament_sensor
...
Mmu filament sensor
2018-08-27 05:26:12 +02:00
03fffae4c3
finda runout sensor can be turned on/off from menu
2018-08-27 05:20:42 +02:00
c57fdb11b7
show active extruder: numbers corrected
2018-08-26 14:22:52 +02:00
815167c4b6
Merge pull request #1066 from mkbel/fix_linearity_correction_2
...
Fix linearity correction 2
2018-08-25 16:56:40 +02:00
255cd2f34e
Merge pull request #1056 from mkbel/prdel
...
Reserve space for MENU_ITEM_EDIT_int3_P in shared memory
2018-08-25 16:55:56 +02:00
df61172984
Fix linearity correction not saved and applied when menu was left by timeout.
2018-08-24 20:31:49 +02:00
46a3baac57
Add menu_item_edit_P<uint8_t*> specialization to be used for linearity correction. Works well, but costs about 600..700B of FLASH, needs to be optimized.
2018-08-24 20:06:09 +02:00
ac5cb0989e
Uncomment linearity correction menu. Fix return from linearity correction menu.
2018-08-24 16:00:51 +02:00
3780516f74
PFW-512 Reserve space for MENU_ITEM_EDIT_int3_P in shared memory in lcd_tune_menu().
2018-08-22 19:47:29 +02:00
bb5ac93921
Add missing compile time check for ShortTimer fitting into menu_data. Convert preprocessor checks to shorter and more accurate static_assert. Remove redundant macro MENU_DATA_EDIT_SIZE. Decrease scope of menu_stack and asociated macro. No functional change.
2018-08-22 18:55:42 +02:00
dfb4bfac5b
MMU - display status while switching active extruder [PFW-465]
2018-08-22 16:38:34 +02:00
1cd0c6cfea
Status screen - print active MMU exrtuder (1/2 PFW465)
2018-08-20 00:59:36 +02:00
c4281b0b36
Status screen redesign - fix of flickering and text wraping on status screen
...
printf formating, saved flash, reduced code size
2018-08-20 00:27:45 +02:00
fd9516f520
Status screen - status message logic simplification
...
added definitions of custom_message_type values
removed flag custom_message (previous solution maybe caused displaying of empty status line)
fixed in Marlin_main.cpp code "custom_message = _T(MSG_TEMP_CALIBRATION)"
2018-08-19 18:34:57 +02:00
f1ad1d22ba
Menu lcd_adjust_bed fixed (Bed level correction, PFW-499)
2018-08-19 13:59:33 +02:00
8409a26594
Live adjust Z - display zero in case of invalid calibration status (same logic in babystep_load and _lcd_babystep)
2018-08-10 19:55:50 +02:00
923a06c164
menu data shared memory re-design
...
+code cleaning
2018-08-10 02:59:49 +02:00
796079bb08
MMU2 communication - connection after reset, fw versions, state machine
...
+removed debug log from tmc2130
2018-08-09 17:43:43 +02:00
4e32fb7181
removed '!' signalization when accel/feedrate limits reached
2018-08-08 20:23:13 +02:00
ca25ec90bd
Disabled timeouts in support and failstats menus
2018-08-08 19:28:34 +02:00
9e09efc9f4
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
...
conflicts + fix
2018-08-07 20:55:08 +02:00
71f1a1f6db
MMU - communication, check after start, code cleaning
2018-08-07 20:37:59 +02:00
cf06c5171c
merge with upstream
2018-08-03 18:43:09 +02:00
a1f69e0924
manage response update
2018-08-03 18:37:52 +02:00
468873ec68
MMU2 - removed conditional translation for SNMM_V2, new module mmu
2018-08-02 18:54:00 +02:00
d378575a68
SNMM_V2 - default retraction declared as variable
2018-08-02 17:07:09 +02:00
1685f83020
Merge pull request #971 from mkbel/fix_menuData_compiler_warnings
...
Fix 98 compiler warnings of type: warning: dereferencing type-punned …
2018-08-02 09:42:54 +02:00
ef8921d45e
Fix 10 compiler warnings of type: sketch/menu.cpp: In function 'void _menu_edit_int3()':
...
sketch/menu.cpp:272:51: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
#define _menu_data (*((menu_data_edit_t*)menu_data))
2018-08-01 22:43:36 +02:00
93d2b37b5c
Fix 98 compiler warnings of type: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
2018-08-01 22:43:27 +02:00
bafd290141
Sound
...
& TuneMenu
2018-08-01 22:34:58 +02:00
ac60b3ebe7
Merge pull request #996 from PavelSindler/snmm_v2
...
M600 updated
2018-08-01 19:39:08 +02:00
06063118bd
M600 updated
2018-08-01 18:47:28 +02:00
1a2d7657dc
Merge branch 'Fix_warnings_ledvinap' into fix_compiler_warnings
2018-08-01 17:39:54 +02:00
6f824730af
Merge branch 'Fix_warnings_ledvinap' into fix_compiler_warnings
2018-08-01 17:37:09 +02:00
ab5593e673
Merge branch 'Fix_warnings_ledvinap' into fix_compiler_warnings
2018-08-01 16:58:09 +02:00
0e059f8da6
single material fix: remove semicolon, unload_filament() function definition
2018-08-01 11:33:58 +02:00
d363bd071d
Merge pull request #990 from PavelSindler/snmm_v2
...
Snmm v2: M600, communication timeouts with mmu
2018-08-01 10:43:22 +02:00
40da6deef8
timeouts used when getting response from mmu, M600 improvements, no filament sensor in variants file
2018-07-31 19:00:42 +02:00
04d0178150
automatic M600 initial version
2018-07-31 12:24:22 +02:00
fa30353646
Live adjust Z format fix
2018-07-30 19:24:04 +02:00
970ba6fa2a
Sound
...
all cases
2018-07-29 22:59:14 +02:00
DRracer
Yuri D'Elia
MRprusa3d
leptun
NotaRobotexe
Marek Běl
MRprusa3d
Marek Bel
Renzo Dani
Renzo
Ondrej Tuma
PavelSindler
PavelSindler
Robert Pelnar