4a16fe6902
Save z_offset, bed_temp and pinda_temp with sheet calibration.
2019-06-26 14:10:12 +02:00
b7fe43bf68
Deleted bad cols/rows definitions for translation.
2019-05-07 12:52:23 +02:00
96a111119b
document
2019-03-28 14:52:50 +01:00
8f69d5a501
document
2019-03-28 14:48:35 +01:00
e259967991
remove / comment debug code
2019-03-27 20:41:45 +01:00
5863297538
if deviation between current Z-probe and avg, value > 50um, enlarge Z-probe movements and repeat measurement
2019-03-27 20:25:00 +01:00
a9ce38df71
Function for decision if we have valid Z-calibration data in eeprom fixed, mesh bed leveling: possible crash fix, temporaty debug info on serial line.
2019-03-26 17:14:05 +01:00
ef198856a4
increase relative movement in Z to work better with higher hysteresis PINDAs
2019-03-14 14:10:52 +01:00
9e0e4198c5
Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update
2019-03-14 01:52:44 +01:00
6c70d59810
mbl settings initialization fix
2019-03-13 15:05:10 +01:00
0aa21c362e
compile error fix
2019-03-11 23:37:30 +01:00
9a83925a97
fixed bug in counting approximate Z coordinate
2019-03-11 23:13:55 +01:00
141b78c048
number of Z-probes defualt value changed from 4 to 3, mmu stealth mode switch in settings menu
2019-03-10 16:03:46 +01:00
f293d61d3d
faster Z probe: move Z 150um relatively to last measurement. If PINDA is triggered at the beginning of measurement, move Z 500um higher and repeat measurement
2019-03-08 18:52:14 +01:00
6a864ffbab
G80 parameters configurable via settings menu
2019-03-08 15:43:37 +01:00
7c187541e1
function for valid points determination improved; simple Z-coordinate estimation; measure all points and use inaccurate Z-coordinate in case that we don't have enought information for counting Z-coordinate estimation
2019-03-05 22:36:30 +01:00
d9e93e8a77
measurements points moved 10mm to the left; measure only chosen points (e.g. not points affected by magnets proximity)
2019-03-05 20:40:08 +01:00
17f095b957
shorter Z movements (makes calibration faster)
2019-03-04 20:32:56 +01:00
e27fdafcec
menu switch - initial
2019-02-28 19:42:09 +01:00
51827c578f
MESH_MEAS_NUM_X_POINTS constant correction to MESH_MEAS_NUM_Y_POINTS
2019-02-22 15:05:06 +02:00
62875f2e95
MESH_MEAS_NUM_X_POINTS constant correction to MESH_MEAS_NUM_Y_POINTS
2019-02-22 14:35:48 +02:00
4835b9b220
7x7 points mesh bed leveling
2019-02-14 10:57:58 +02:00
9a68501039
MK2 variants compilable
2018-11-06 14:17:43 +01:00
1585dc66b0
Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500
...
Known limitation: Unable to compile.
2018-10-08 15:58:49 +02:00
3f28632443
Use cs.axis_steps_per_unit from ConfigurationStore.
2018-09-24 14:54:41 +02:00
8409a26594
Live adjust Z - display zero in case of invalid calibration status (same logic in babystep_load and _lcd_babystep)
2018-08-10 19:55:50 +02:00
e22d204e8e
LCD menu optimalization - print functions
...
+removed unused code
2018-07-16 19:29:27 +02:00
68e59399af
LCD menu optimalization - lcd_printPGM replaced with lcd_puts_P
2018-07-16 18:08:01 +02:00
b6223d5623
LCD menu optimalization
2018-07-16 04:13:26 +02:00
02bd319a6c
Merge pull request #818 from 3d-gussner/MK3_fix7
...
Fix warning #7
2018-07-11 21:04:13 +02:00
c29042dead
Fix warning:
...
Another fix from PR https://github.com/prusa3d/Prusa-Firmware/pull/138 and discussed in Issue https://github.com/prusa3d/Prusa-Firmware/issues/807
Ardunio IDE 1.6.8 and 1.8.5 result with Compiler warnings set to "More" or "All"
´´´
sketch\mesh_bed_calibration.cpp: In function 'sample_mesh_and_store_reference':
sketch\mesh_bed_calibration.cpp:2852:53: warning: 'zmax' may be used uninitialized in this function [-Wmaybe-uninitialized]
zmax = min(zmax, mbl.z_values[j][i]);
^
sketch\mesh_bed_calibration.cpp:2848:15: note: 'zmax' was declared here
float zmax = zmax;
^
´´´
2018-06-08 10:13:43 +02:00
47c68c884c
New ML support - fixed duplicate strings
2018-06-01 14:35:03 +02:00
d307868a90
merge with upstream
2018-05-28 20:38:55 +02:00
7e79ce8e53
MK3: crash detection for Z axis is active during auto home and mesh bed leveling (normal mode is forced for Z movents); temp cal coordintes corrections; temp cal: xy movents always in safe Z distance from heatbed, Z-axis homing improved
2018-05-28 20:26:15 +02:00
2cf20c8c99
New ML support - migration - fix_source_1.sh script (replace 'MSG_xx' with '_T(MSG_xx)')
...
+ output + fixed source
2018-05-23 16:37:08 +02:00
bd587faab9
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 03:20:03 +02:00
a184d2b824
Merge pull request #756 from XPila/MK3-new_lang
...
Mk3 new lang
2018-05-20 13:26:28 +02:00
a528f8837c
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
2018-05-20 13:24:52 +02:00
503d5551e6
Fix build of MK2. Global variable distance_from_min was removed, do not update it.
...
Expression
float y = vec_x[1] * pgm_read_float(bed_ref_points_4+mesh_point*2) + vec_y[1] * pgm_read_float(bed_ref_points_4+mesh_point*2+1) + cntr[1];
is identical with expression in count_xyz_details().
2018-05-16 18:40:36 +02:00
553779a65d
Merge pull request #723 from mkbel/refactor_bed_geometry
...
Refactor bed geometry
2018-05-14 17:18:03 +02:00
329ea199ec
Show measured bed offset from expected position even if not homed. Remove redundant lcd_quick_feedback() calls.
2018-05-10 18:24:49 +02:00
59f3f9d8ec
New localization - includes fixed
2018-05-09 16:55:41 +02:00
f00bde09a4
Re-factor bed calibration point coordinates to match bed CAD data. Tested successfully on MK3 (auto home position not calibrated and calibrated printer and print area position of calibrated printer). MK25 not tested.
2018-05-08 21:54:11 +02:00
d6aa149cfa
Conserve 58 bytes of flash by returning by reference.
2018-04-26 16:36:02 +02:00
ae08788c99
Split lcd_service_mode_show_result screens to separate functions. Make them non blocking. Remove global array distance_from_min, pass it as function return value. Make Support submenus returning to Support menu.
2018-04-26 16:36:02 +02:00
e7ad81e159
Merge pull request #660 from mkbel/fix_z_home_point
...
Update documentation of mesh_bed_calibration.cpp.
2018-04-25 17:27:22 +02:00
0271ab3643
Meshbedleveling, calibration Z
...
check crash Z (MK3)
check deviation of Z-probe (>50um == error, all printers)
kill with message "debris on nozzle..."
2018-04-25 16:19:16 +02:00
5f12289339
CalibrationZ/MK3 - check crash Z after homeaxis (kill with message "debris on nozzle...")
2018-04-25 14:43:32 +02:00
3abfeb831f
Update documentation of mesh_bed_calibration.cpp.
2018-04-25 12:21:20 +02:00
37ebe5c35d
Move default correction matrix of not calibrated printer to world2machine_default() function. Use world2machine_reset() to uncorrected matrix. Call it from world2machine_revert_to_uncorrected() and from world2machine_default() if there is no default shift to remove code duplication.
2018-04-23 20:33:39 +02:00
Marek Bel
Ondrej Tuma
PavelSindler
Laurentiu
Robert Pelnar
mkbel
3d-gussner
PavelSindler