50231b76da
Improved handling of unknown Z position
...
- Introduce raise_z_above to move Z carefully when the current position
is potentially unknown, using stallguard
- Use raise_z_above for:
* filament loading/unloading clearance
* extruder spacing when preheating (to avoid buildplate marks on PEI)
* before homing to avoid damaging the build plate and to avoid
repeated Z moves as well
Since raise_z_above is conditional, it will only raise when needed.
Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
2019-10-22 15:49:10 +02:00
4943e17bda
Preserve power during PP by turning off backlight
2019-10-19 18:45:31 +03:00
0ed4a23ae7
And another compile fix...
2019-10-18 12:42:55 +03:00
9fc42526e7
Backlight always on during calibration
2019-10-18 12:18:43 +03:00
5a4126e00c
Merge pull request #2263 from leptun/MK3-Fix_PSU_DELTA_SILENT
...
PSU_DELTA fix force_high_power_mode()
2019-10-16 13:22:22 +02:00
7f3ba499a0
Do not wait forever if the heater on the extruder is disabled
2019-10-15 20:54:00 +02:00
68491c9d4d
First implementation
2019-10-11 19:06:37 +03:00
e3ac2e2509
PSU_DELTA fix force_high_power_mode()
2019-10-10 19:01:57 +03:00
219a5e0625
Initialize EEPROM_SILENT in one place both for MK3 and MK25 printers and make it more clear.
2019-10-03 21:25:52 +02:00
7feb763643
Move check for clear EEPROM just after factory_reset() to ensure nothing is written to EEPROM before check.
...
Fix wizard not starting after Factory RESET / All Data on MK25 printer.
This was broken by:
Author: leptun <voinea.dragos.alexandru@gmail.com>
Date: 3 weeks ago (9/12/2019 6:16:31 AM)
Commit hash: 78708903e8
2019-10-02 18:38:46 +02:00
b39f09b68e
Merge branch 'MK3' into MM_lay1_cal
2019-10-01 19:20:50 +03:00
d044d3b7b5
Merge pull request #2244 from MRprusa3d/PFW-1008
...
EEPROM_BABYSTEP_Z using removal
2019-10-01 18:04:09 +02:00
ed13788e0c
EEPROM_BABYSTEP_Z using removal
2019-10-01 16:57:37 +02:00
06187f52f3
Merge pull request #2230 from leptun/MK3_Octoprint_fIxes
...
Mk3 Fan error fix
2019-10-01 11:34:55 +02:00
61c7479579
Code cleanup: Move texts to messages.c/h
2019-09-30 20:16:01 +03:00
aba9d1c360
Merge branch 'MK3' into MM_lay1_cal
2019-09-30 18:13:57 +02:00
8c7015df53
Document set current command.
2019-09-27 15:42:31 +02:00
9c22692827
Fix Cancel Print command processing
2019-09-25 22:34:31 +03:00
4d149f0dfa
Do not send useless keepalive messages after print is canceled from lcd
2019-09-25 18:50:29 +03:00
14b72d2b46
Prevent timeout when printing from SD with USB host connected
2019-09-25 18:12:19 +03:00
2363f19a62
Minor tweaks for usb printing
2019-09-20 21:07:20 +03:00
fd01942db8
FAN Error fix - Initial
2019-09-19 20:48:59 +03:00
19a8537901
Document.
2019-09-17 20:35:18 +02:00
027b6238fd
Mark code unused when PINDA_THERMISTOR is defined by macro. Saves 1B of RAM and 4B of FLASH memory.
2019-09-17 20:26:03 +02:00
73642632f5
Do not force PLA filament in first layer calibration from wizard. Remove duplicate variable wizard_active. Saves 410 B of FLASH and 1 B of RAM.
2019-09-12 22:37:28 +02:00
e83b2ebe1f
Rename mFilamentMenu to lcd_generic_preheat_menu to match naming convention for global function and be more descriptive.
2019-09-12 18:15:15 +02:00
6661d3aa45
Merge remote-tracking branch 'prusa3d/MK3' into MM_lay1_cal
2019-09-12 14:28:52 +02:00
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu
...
Unify preheat menu, add ASA material
2019-09-12 14:25:38 +02:00
14dc6b86e0
Change undocumented behaviour of M190 (Wait for bed temperature). Document M190 and M109 (Wait for extruder temperature).
...
Do not remember CooldownNoWait property set by M190 and M109. If M190 was invoked without parameters, CooldownNoWait property was set if it was previously set by "M109 S" or "M109 S" or printer was after power up. Otherwise CooldownNoWait was not set. Now CooldownNoWait is never set if M190 is invoked without parameters.
Saves 44 B of FLASH memory.
2019-09-11 23:37:09 +02:00
e1e40213b2
Enable fan pin test even for MK3 (was disabled in 3.7.2 due to lack of
...
FLASH)
2019-09-10 16:49:22 +02:00
898e85e69f
Merge pull request #2038 from Eriobis/MK3
...
Add a threshold distance to Z calibration
2019-09-10 16:20:24 +02:00
978ace7fd7
Update Marlin_main.cpp
2019-09-09 02:16:06 +02:00
e73b0a88d5
Use same format for all instances where "ok" is send to serial line.
2019-09-05 22:35:01 +02:00
2345288d40
Fix the LCD pause function
...
Do not call long_pause recursively!
long_pause() is called before resetting the lcd_command_type. As
long_pause uses st_synchronize() internally, there could be time to
schedule another call to long_pause().
2019-08-31 15:28:31 +02:00
3f04c4db87
Merge branch 'MK3' into preheat_menu
2019-08-27 22:20:23 +02:00
269aef1696
Remove unused code guarded by WATCH_TEMP_PERIOD macro as most of the functionality is duplicate to what is implemented in temp_runaway_check(). This will release us from porting setWatch() to unified preheat menu and maintaining it.
2019-08-27 20:05:10 +02:00
11ce786aaa
Support for more special characters allowed in file names (^ + = [ ] ;
...
,)
2019-08-27 13:47:58 +02:00
159a1a70d8
Update documentation.
2019-08-26 17:19:57 +02:00
52cb37770b
Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card.
...
As sdpos_atomic was not updated after printer power up and first power panic recovery, it was equal 0. When the first command from SD card was queued its size on SD card was computed as current SD index position minus sdpos_atomic. This was equal to offset from beginning of the file limited to 16 bit storage type. When next power outage occurred earlier then this command was finished and wiped out of queue, this command size (extraordinarily big) was subtracted from sdpos_atomic and saved to EEPROM. This led to up to 65536 B jump back in file printed after next power panic recovery.
2019-08-23 19:30:20 +02:00
c6df3fe012
Merge pull request #2127 from DRracer/code-size-reduction-1
...
Code size reduced by almost 5KB
2019-08-22 14:25:23 +02:00
a7c2aec04c
Code size reduced by almost 5KB
2019-08-21 09:59:51 +02:00
3ed6d0637c
Re-enable tmc2130_sg_stop_on_crash only if crash detection enabled from menu.
...
This fixes bug, that disabling crash detection from menu doesn't work during recovery from crash detection.
2019-08-20 19:32:39 +02:00
f204cdea81
Refactor
...
Remove variable CrashDetectMenu. Read this state from EEPROM_CRASH_DET instead in bool lcd_crash_detect_enabled().
Rename crashdet_enable() to lcd_crash_detect_enable() and move it to ultralcd.cpp.
Rename crashdet_disable() to lcd_crash_detect_disable() and move it to ultralcd.cpp.
Rename lcd_crash_mode_set() to crash_mode_switch().
Remove forward function declarations from *.cpp file.
Saves 34B of FLASH and 2B of RAM.
2019-08-20 17:22:27 +02:00
f07635d08a
Merge pull request #2116 from mkbel/fix_mmu_lay1cal
...
Fix mmu lay1cal
2019-08-19 19:07:10 +02:00
f0642f88f1
Fix power panic broken when PSU_Delta defined.
...
Remove disable_z() call from uvlo_() and uvlo_tiny() power panic interrupt handlers. As historically this function was empty. And in case PSU_Delta macro defined it switches Z trinamic to silent mode, which could take some time and is not needed. Remove alignment to to full step from disable_force_z(), as it is not needed when switching to silent mode.
2019-08-19 17:37:23 +02:00
e53734895f
Make MMU load failed blocking to workaround lack of resume print menu item.
...
The same workaround used as for USB print (Octoprint).
2019-08-16 20:20:17 +02:00
ba81149afe
Merge branch 'MK3' into MK3_3.7.3
2019-08-15 10:25:51 +02:00
a28c365bb1
Merge pull request #2075 from MRprusa3d/PFW-873b
...
farm mode update, documentation correction
2019-08-07 17:48:30 +02:00
b471bb7540
farm mode update, documentation correction
2019-08-05 17:51:26 +02:00
091cd49ca5
Fw version check disabled in farm mode
2019-08-05 16:59:09 +02:00
cb19f0958b
Use _delay() and _micros() for future compatibility
2019-08-05 09:51:06 +02:00
18b8dc89e5
Merge remote-tracking branch 'upstream/MK3' into MK3_LA15
2019-08-04 17:06:34 +02:00
7c9d3dd177
Update doxydoc of new G-codes
2019-08-01 13:09:20 +02:00
49d2866b48
Add threshold distance to Z calibration
...
Add missing if statement
2019-07-30 19:43:07 -04:00
556b87edec
M350 for all axis - MK3
2019-07-29 09:41:33 +03:00
3e60cf4537
enable only for MK3S (out of FLASH on the MK3)
2019-07-23 16:51:02 +02:00
593675c667
delay, micros for the 3.7.x branch
2019-07-23 16:40:21 +02:00
6860a572c2
detection of faulty RAMBo (incorrect capacitor on fan tach pin) for MK3/S
2019-07-23 15:55:53 +02:00
6f79ef4c9c
resolve hidden conflicts in commented code
2019-07-22 17:29:43 +02:00
65087b89ee
Merge remote-tracking branch 'upstream/MK3' into code_size_optimization
...
and resolve conflicts (ultralcd.cpp)
2019-07-22 17:26:14 +02:00
bd4bfbe586
Added M862 details
2019-07-19 16:15:12 +02:00
94e79806bc
Updated doxygen docs to work better with confluence.
2019-07-19 13:51:55 +02:00
756ce51b5e
Merge branch 'MK3' into octoprint_fix
2019-07-17 20:06:06 +02:00
b8fec59f21
octoprint fan error fix
2019-07-17 19:59:31 +02:00
255db28684
merge unit test and upstream changes
2019-07-17 10:30:49 +02:00
e6255e8451
octoprint fan error work
2019-07-16 19:18:31 +02:00
1dab0f7a04
Merge pull request #2008 from leptun/MK3_LCD_improvements
...
Lcd optimization - 1K of flash saved
2019-07-16 19:15:57 +02:00
8b806f692e
Merge pull request #1664 from MRprusa3d/PFW-811
...
"disable_z()" for Delta PSU
2019-07-16 16:46:34 +02:00
d65b333664
Merge pull request #2003 from mkbel/heat_hysteresis
...
Heat hysteresis
2019-07-16 13:10:47 +02:00
0422713b29
Merge pull request #2005 from prusa3d/MK3_3.7.2
...
Mk3 3.7.2
2019-07-16 08:50:38 +02:00
8b1c687629
Lcd optimization - 1K of flash saved
2019-07-15 20:32:58 +03:00
9083d151b2
wait_for_heater() in restore_print_from_ram_and_continue() only if saved_extruder_temperature differs from target hot-end temperature.
...
This fixes problem, that restore_print_from_ram_and_continue() blocked for heating for at least TEMP_RESIDENCY_TIME (3 seconds) even if temperature was resumed by M600 command.
2019-07-15 18:07:05 +02:00
549a8a1a6b
Restore print fan speed earlier then nozzle temperature.
...
Avoids nozzle temperature dip when fan is turned on.
2019-07-15 16:25:21 +02:00
8fb30f886a
octoprint stop fix
2019-07-15 14:30:21 +02:00
a3fde091ab
More than 7.5KB saved by slight refactoring of printing to serial line
2019-07-12 10:10:56 +02:00
d3dd0ad271
Merge pull request #1952 from NotaRobotexe/sound
...
new sound
2019-07-10 18:06:32 +02:00
98bae7af9f
Merge branch 'MK3' into PFW-873
2019-07-10 16:50:14 +02:00
9585789288
Merge pull request #1976 from NotaRobotexe/MK3_3.7.2_PP
...
dont fire power panic at normal power off
2019-07-10 14:19:00 +02:00
8229a45187
pre-production version ;-)
2019-07-09 12:16:51 +02:00
9592460281
add old delay
2019-07-04 18:43:59 +02:00
e77898d5dc
code edit
2019-07-04 13:21:27 +02:00
81b3b71cca
check eeprom inicialization
2019-07-03 19:37:11 +02:00
a3a7f3106e
print parameters checking
2019-07-03 17:21:11 +02:00
ff3c9d1a7c
dont fire power panic at normal power off
2019-06-28 11:25:56 +02:00
4a16fe6902
Save z_offset, bed_temp and pinda_temp with sheet calibration.
2019-06-26 14:10:12 +02:00
4058cd144b
add delay_keep_alive without updating lcd
2019-06-25 14:30:11 +02:00
b5168bd6c2
fan error fix
2019-06-24 17:30:56 +02:00
19a474eaa5
Fix compiler warnings.
2019-06-20 18:00:29 +02:00
0a48082609
Add steel sheet profile selector.
2019-06-20 16:40:53 +02:00
24cec4091b
Merge branch 'MK3' into sound
2019-06-17 17:28:19 +02:00
aff020a6d4
Merge pull request #1897 from NotaRobotexe/farm_mode
...
PFW-571 send PRN:4 instead PRN:1, PFW-874 new firmware version alert with 30s timeout
2019-06-14 20:05:30 +02:00
b1df1fb1f1
Fix formatting. We are never using 2 space indentation. 4 spaces are preferred, tabulator is acceptable if surrounding code uses tabs.
2019-06-14 18:18:27 +02:00
6717590631
Merge branch 'MK3' into MK3_LA15
2019-06-13 15:39:50 +02:00
55dc78546b
Merge pull request #1913 from mkbel/fix_spelling
...
Fix spelling.
2019-06-13 15:12:30 +02:00
25f0eb9a39
Fix spelling.
2019-06-13 15:01:54 +02:00
72f5e87c61
Merge branch 'MK3' into use_enum_class_2
2019-06-12 19:17:35 +02:00
1390d4e5b9
Use first letter capital camel case for enum class members. Change underlying type to uint_least8_t.
2019-06-12 19:11:41 +02:00
5fcf760954
Use first letter capital camel case for enum class members. Rename CustomMsgTypes to CustomMsg. Remove unnecessary maping to numbers. Change underlying type to uint_least8_t.
2019-06-12 18:54:43 +02:00
cbb92860d0
Use first letter capital camel case for enum class members.
2019-06-12 18:54:32 +02:00
b7d3766ae2
Merge branch 'MK3' into PFW-790
2019-06-12 17:32:13 +02:00
Yuri D'Elia
leptun
DRracer
Marek Bel
MRprusa3d
MRprusa3d
Marek Běl
Marek Kühn
Simon Benoit
NotaRobotexe