0a2087c1cb
build 143e
...
Linear advance disabled
Max feedrate reduced to 200mm/s
Silent max accel reduced to 984mm/s^2
some debug logs removed, tmc_init - log message fixed
2018-01-04 18:08:22 +01:00
8a5ba89a9c
Missing serial characters debuging
...
disabled fan ISR
disabled fsensor ISR
disabled linear advance
build 143b
2018-01-02 20:55:33 +01:00
c6e77f55f6
checkrx in stepper returned back
...
build 143a
2017-12-30 02:55:22 +01:00
568f03c46e
build 143
2017-12-29 23:49:11 +01:00
8d1f2afbf2
build number change
...
just 141r -> 142
2017-12-29 20:22:45 +01:00
0920b62d80
build number change
2017-12-29 20:21:06 +01:00
e3c006dbe9
Serial communication uses port0 or port1, not both, removed some suspected code.
...
build 141
2017-12-29 00:06:47 +01:00
f71f133e80
power panic polished
...
Retraction set correctly to have minimum missing line
Z motor current not lowered that drascialy
Extruder motor turning off instantly
Beeping added to the end
2017-12-28 23:26:06 +01:00
f1c741d027
Filament autoloading improved and minor tweaks
...
Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading)
Autoloading now unable to turn on when filament sensor is turned off or not responding
Color not right changed to color not correct to avoid slight confusion
2017-12-28 18:59:57 +01:00
5e5588c72c
Text grooming
...
Added language mutations of error messages, menu items.
Synced wording of crash detection in messages.
rPi port -> RPi port.
Minor menu items alignment.
2017-12-28 15:45:52 +01:00
bd58718d9d
dummy "ok" response
...
build 139 (RC4)
2017-12-28 02:45:05 +01:00
546314fda7
Removed debug messages from serial comunication (octoprint...).
...
build 137b
2017-12-27 20:29:24 +01:00
23ed33fc21
disable crashdetection while usb printing
2017-12-23 03:42:19 +01:00
eba2924fdd
Remove load/unload menu when autoload enabled
2017-12-20 22:55:11 +01:00
a3a0e70eeb
Fsensor autoload enabled menu and eeprom variable
2017-12-20 22:29:41 +01:00
c88938e813
Fixed blocked lcd buttons
...
build = 137y
2017-12-20 21:33:07 +01:00
25dd6dd673
new module adc (analog2digital)
...
temperature.cpp - adc sampling state machine removed
new dcode D9 (adc read/write + simulator)
temporarily DEBUG_DISABLE_STARTMSGS because UI blocked
SILENT_MAX_FEEDRATE reduced to 172mm/s
hexfile removed
build number 137x
2017-12-20 13:42:20 +01:00
5daf53f35b
version changed
2017-12-15 11:55:37 +01:00
7304579ca5
build 135
2017-12-13 23:19:51 +01:00
240922d789
build 134
2017-12-13 16:27:35 +01:00
ae8e84a698
build 133
2017-12-13 14:44:53 +01:00
889f4e49fb
eeprom defines
2017-12-13 14:17:32 +01:00
af5241623d
version change
2017-12-13 13:14:25 +01:00
cdeb835b5d
Failstat couters initialization
...
build number = 131
2017-12-12 23:37:31 +01:00
5b314d0829
second serial active address in eeprom redefined
2017-12-12 17:18:06 +01:00
0271da3c67
Ambient thermistor - new table (PFW-71)
...
Crashdetection disable durring print (PI3M3-42)
Stealth mode - better limit values (PI3M3-5)
2017-12-12 15:44:42 +01:00
7204e91ec6
Filament sensor not responding - (PFW-41)
...
build number = 130
2017-12-11 18:17:25 +01:00
c9f95628d0
changed version
2017-12-11 11:49:40 +01:00
26135ea227
all sd sort files: initial version; sorting type switch not added to SD card menu itself
2017-12-10 11:08:50 +01:00
071873b38a
init; last merged file: Marlin_main.cpp
2017-12-06 17:48:16 +01:00
40b7a5c82f
build number changed
2017-12-06 14:59:26 +01:00
bc0278c6e1
build number changed
2017-12-05 17:13:07 +01:00
0de584c213
bugfix UVLO - extruder position from stepper
2017-11-29 02:08:15 +01:00
a56b0ccaf8
bugfix - Filament sensor enable from menu
2017-11-29 00:15:45 +01:00
9413eca52c
UVLO recover E absolute mode
...
build number 119
2017-11-28 23:41:58 +01:00
059c255a35
changed build version to b117
2017-11-28 18:31:38 +01:00
2cf7f54e5f
changed build
2017-11-27 20:29:47 +01:00
533418d63e
opravene nezadouci resetovani watchdogem
...
powerpanic Z shift = 0.64mm (misto 1.92mm)
teplotni kompenzace default = ON
2017-11-27 14:43:56 +01:00
25c16cc835
Extrudser info, merge upstream (powerpanic fix)
...
build number = 114
2017-11-27 07:44:12 +01:00
60930beb52
Merge pull request #108 from PavelSindler/power_panic
...
Power panic works with folders
2017-11-27 07:27:17 +01:00
42b533b5d8
first working version
2017-11-27 06:20:51 +01:00
4dae6f871e
Sg load meassurement durring self test - 'Belt status'
2017-11-27 04:46:58 +01:00
5a77113fb5
init
2017-11-27 01:59:47 +01:00
e605305db4
build number changed
2017-11-24 23:01:53 +01:00
f2e9bdef24
Fsensor synchronization and triggering improved
...
Watchdog implemented (4s interval, triggered from manage_heater)
Stallguard sensitivity for XY decreased by 1
Extruder current adjusted to 5.5kg force
Build number = 111
2017-11-24 21:53:35 +01:00
213ee43cc9
Merge usptream
...
Crashdetection fixed
pl language removed (because of low flash capacity)
build number = 110
2017-11-22 08:41:52 +01:00
aee62750e7
Build 109
2017-11-16 22:03:36 +01:00
279ea79bf6
Merge pull request #86 from PavelSindler/keepalive_messages
...
host keep alive messages
2017-11-16 20:53:09 +01:00
ee2f927148
Build Number = 108
...
FSensor log can be enabled with D9125L1
Selftest menu
PINDA D codes
2017-11-16 20:51:50 +01:00
91d125369e
keepalive messages initial version
2017-11-15 15:09:29 +01:00
Robert Pelnar
Michal Průša
PavelSindler