7e79ce8e53
MK3: crash detection for Z axis is active during auto home and mesh bed leveling (normal mode is forced for Z movents); temp cal coordintes corrections; temp cal: xy movents always in safe Z distance from heatbed, Z-axis homing improved
2018-05-28 20:26:15 +02:00
e8730c2899
Merge branch 'MK3' into read_xyz_cal
...
# Conflicts:
# Firmware/ultralcd.cpp
2018-05-10 18:31:31 +02:00
eced66f0f6
Show full screen blocking notification message after heater turning off by safety timer.
2018-04-27 16:23:20 +02:00
1a80fc28e8
Add zero point offset information support menu.
...
Note: XYZ menu is shown only if not printing and printer must me homed to show non-zero value.
2018-04-26 16:36:03 +02:00
d85a8077a8
M115 update
2018-04-25 20:39:10 +02:00
010ceceff9
add another homing after steel sheet is removed; added timeout for pinda cooling; if PINDA doesn't trigger before reaching Z = -1mm, temp. calibration fails
2018-04-24 13:43:51 +02:00
043c8c66be
waiting for pinda probe cooling
2018-04-19 16:55:00 +02:00
47eab97d2d
temp. calibration is automaticly activated after calibration process
2018-04-11 18:16:16 +02:00
9cb036fbcb
Merge remote-tracking branch 'prusa3d/MK3' into ustep_linearity_2
2018-03-28 19:11:02 +02:00
40a064ffbc
Add extruder linearity correction to settings menu.
2018-03-28 18:53:37 +02:00
2ce75293f3
stealth mode / silent mode
2018-03-23 19:49:59 +01:00
ac1a56b493
Merge branch 'MK25' into MK3
2018-03-13 20:43:19 +01:00
a6f900fd3c
Merge remote-tracking branch 'upstream/MK25' into MK25
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2018-03-06 15:11:50 +01:00
85bc19b77c
force selftest if user upgraded from 3.1.2-RC1 or older fw version
2018-02-27 17:52:13 +01:00
0323af531d
printer types and motherboard types added to eeprom; min extrude temp lowered because of woodfil
2018-02-22 00:09:12 +01:00
3bd892135a
erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used
2018-02-05 16:49:06 +01:00
9d8191323b
Merge pull request #440 from XPila/3.1.1-RC6
...
Extruder stealthChop and constant-off-time mode.
2018-01-31 20:21:02 +01:00
adc69eda18
PINDA temp. calibration warning messages.
2018-01-31 17:03:33 +01:00
88f248cb77
Inform user that hardcoded default settings were loaded (EEPROM version change)
2018-01-30 11:31:44 +01:00
b2ba72ffcd
Merge pull request #411 from PavelSindler/typo_fixed
...
typo fixed
2018-01-24 00:10:28 +01:00
69f97e0ec3
Separated the "Unknown" build from the "Development" build.
...
Documented purpose of the various build types.
2018-01-22 17:41:05 +01:00
bfa675c1a4
initial message for debugging fw version
2018-01-17 16:00:19 +01:00
b73520bcea
successfull -> successful
2018-01-17 14:40:37 +01:00
d8117eab66
timeout fix and MSG_UNLOAD_SUCCESSFULL message shortened
2018-01-15 17:39:42 +01:00
87ffb0b193
Merge pull request #400 from PavelSindler/M600_update
...
M600 update
2018-01-15 15:27:41 +01:00
c36af887b7
M600 has timeout for nozzle, different procedure for unload
2018-01-15 11:30:28 +01:00
8bd84ba4fd
Merge pull request #396 from XPila/MK3
...
Mk3
2018-01-12 22:08:50 +01:00
ebf6d08fae
Crash detection - message on lcd (PFW-115)
2018-01-12 21:02:49 +01:00
3e6d853364
Debugging of the stepper timer routine. When enabled through
...
DEBUG_STEPPER_TIMER_MISSED, the printer is halted on stepper timer overflow
and an error message is displayed.
2018-01-12 20:51:14 +01:00
0f46fa0c37
blocking messages in settings/tune menu (PFW104)
...
switch normal/stealth (PFW110)
2018-01-12 19:54:32 +01:00
087532085f
development fw versions has initial message for warning
2018-01-11 15:50:26 +01:00
f1c741d027
Filament autoloading improved and minor tweaks
...
Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading)
Autoloading now unable to turn on when filament sensor is turned off or not responding
Color not right changed to color not correct to avoid slight confusion
2017-12-28 18:59:57 +01:00
5e5588c72c
Text grooming
...
Added language mutations of error messages, menu items.
Synced wording of crash detection in messages.
rPi port -> RPi port.
Minor menu items alignment.
2017-12-28 15:45:52 +01:00
e064133a04
Merge remote-tracking branch 'upstream/MK3' into MK3
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2017-12-28 01:37:13 +01:00
69d496e157
autoload filament menu (PFW-95, PFW-96)
2017-12-27 21:57:51 +01:00
cbd7f033e8
crashdetection and mode menu (PFW-85, PFW-97)
2017-12-27 21:43:04 +01:00
f227952c0b
Merge branch 'MK3' into MK3
2017-12-21 00:07:01 +01:00
17d9bb205a
selftest tests filament sensor, selftest messages have language variants
2017-12-20 23:40:18 +01:00
a3a0e70eeb
Fsensor autoload enabled menu and eeprom variable
2017-12-20 22:29:41 +01:00
011ebb3675
selftest is checking if fans are swapped, host keepalive messages added
2017-12-14 19:36:32 +01:00
f8e3c76315
merging new changes from upstream/MK3
2017-12-12 17:14:48 +01:00
7204e91ec6
Filament sensor not responding - (PFW-41)
...
build number = 130
2017-12-11 18:17:25 +01:00
1c61f2f29c
First working version
2017-12-11 11:30:49 +01:00
868aacc7d5
turn on second serial line from settings menu
2017-12-08 16:56:06 +01:00
44218a1b53
incomplete file check ported from MK2: initial version
2017-12-06 14:55:53 +01:00
020a7ec257
unload filament can be repeated
2017-11-28 19:04:43 +01:00
c0112f05e1
M600: wait for user before unloading filament
2017-11-28 18:28:53 +01:00
3f7be78997
translation to Czech language added
2017-11-27 18:54:44 +01:00
67a2e0a706
settings menu updated
2017-11-27 17:01:01 +01:00
f075711e64
corrected menus
2017-11-27 16:37:46 +01:00
PavelSindler
Marek Bel
Robert Pelnar
PavelSindler
bubnikv
Michal Průša