8a5ba89a9c
Missing serial characters debuging
...
disabled fan ISR
disabled fsensor ISR
disabled linear advance
build 143b
2018-01-02 20:55:33 +01:00
e3c006dbe9
Serial communication uses port0 or port1, not both, removed some suspected code.
...
build 141
2017-12-29 00:06:47 +01:00
f1c741d027
Filament autoloading improved and minor tweaks
...
Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading)
Autoloading now unable to turn on when filament sensor is turned off or not responding
Color not right changed to color not correct to avoid slight confusion
2017-12-28 18:59:57 +01:00
5e5588c72c
Text grooming
...
Added language mutations of error messages, menu items.
Synced wording of crash detection in messages.
rPi port -> RPi port.
Minor menu items alignment.
2017-12-28 15:45:52 +01:00
69d496e157
autoload filament menu (PFW-95, PFW-96)
2017-12-27 21:57:51 +01:00
cbd7f033e8
crashdetection and mode menu (PFW-85, PFW-97)
2017-12-27 21:43:04 +01:00
546314fda7
Removed debug messages from serial comunication (octoprint...).
...
build 137b
2017-12-27 20:29:24 +01:00
7f05b9fd44
changed menu order (PFW 91)
2017-12-22 20:31:45 +01:00
6abba7bfe9
filament autoload - better detection algorithm, autoload in M600 from menu
...
unload menu always visible
2017-12-22 20:14:26 +01:00
f227952c0b
Merge branch 'MK3' into MK3
2017-12-21 00:07:01 +01:00
17d9bb205a
selftest tests filament sensor, selftest messages have language variants
2017-12-20 23:40:18 +01:00
eba2924fdd
Remove load/unload menu when autoload enabled
2017-12-20 22:55:11 +01:00
a3a0e70eeb
Fsensor autoload enabled menu and eeprom variable
2017-12-20 22:29:41 +01:00
a9d5af4a07
Wizard: dont ask if color is clear and dont use automatic filament load; multiscreen messages update
2017-12-20 13:33:45 +01:00
525d022841
whitespace
2017-12-18 19:17:39 +01:00
31add2e69f
removed 4 bytes from maiden eeprom check as these could be set earlier to 0 by lcd_status_screen function
2017-12-18 19:15:36 +01:00
9639b58f4d
Merge pull request #329 from XPila/MK3
...
Meassuring voltages (pwr, bed), voltages menu
2017-12-15 18:42:59 +01:00
01654e7145
Meassuring voltages (pwr, bed), voltages menu
2017-12-15 18:33:35 +01:00
ecbb5cf54b
selftest fix
2017-12-15 17:54:52 +01:00
3c95bea693
threshold changed
2017-12-15 14:07:12 +01:00
011ebb3675
selftest is checking if fans are swapped, host keepalive messages added
2017-12-14 19:36:32 +01:00
8c320d0089
selftest delay -> delay_keep_alive
2017-12-13 14:55:53 +01:00
c1416cbb33
Merge pull request #312 from PavelSindler/wizard
...
Wizard: force high power mode during xyz cal. and selftest; wizard for assembled printer
2017-12-12 20:24:15 +01:00
82dffb688a
force high power mode during xyz cal. and selftest
2017-12-12 20:21:09 +01:00
997c8de161
shipping prep. reset sets wizard flag, shipping prep wizard improvements
2017-12-12 19:17:37 +01:00
f8e3c76315
merging new changes from upstream/MK3
2017-12-12 17:14:48 +01:00
a724c2664c
menus updated, set lcd_commands_step = 0;
2017-12-12 14:25:13 +01:00
9ef5570fa3
menus accessable during first layer calibration updated
2017-12-12 13:41:31 +01:00
d29a95bd65
if first layer calibration is active set SD_PRINTING to true
2017-12-12 11:41:54 +01:00
7204e91ec6
Filament sensor not responding - (PFW-41)
...
build number = 130
2017-12-11 18:17:25 +01:00
124a3e6da8
Stealth mode limits + END_FILE_SECTION=10000
2017-12-11 16:17:36 +01:00
20de899d25
Merge branch 'MK3' into sort_files
2017-12-11 11:50:47 +01:00
13a17f9fd4
dont sort files when changing sort type in settings menu
2017-12-11 11:45:20 +01:00
1c61f2f29c
First working version
2017-12-11 11:30:49 +01:00
b76758b7b6
Ram status - heap and stack monitor.
2017-12-10 23:45:46 +01:00
e8b2043d03
Stack monitor in stepper ISR
2017-12-10 20:38:09 +01:00
26135ea227
all sd sort files: initial version; sorting type switch not added to SD card menu itself
2017-12-10 11:08:50 +01:00
82f5a79527
bug fix (cannot compile) - ultralcd.cpp - conversion from (const char*)
2017-12-08 19:22:02 +01:00
868aacc7d5
turn on second serial line from settings menu
2017-12-08 16:56:06 +01:00
d0b6b19373
save filename to eeprom first, then check if file is complete
2017-12-07 17:16:23 +01:00
2cbd1f7894
fix: added saving filename to eeprom which was removed by accident
2017-12-06 18:13:54 +01:00
44218a1b53
incomplete file check ported from MK2: initial version
2017-12-06 14:55:53 +01:00
a56b0ccaf8
bugfix - Filament sensor enable from menu
2017-11-29 00:15:45 +01:00
1863819e39
pat9125 reinit when fsensor enabled from menu.
2017-11-28 22:44:58 +01:00
ddc8587bbd
Merge pull request #112 from PavelSindler/menu_corrections
...
Menu corrections, translation to Czech language
2017-11-27 18:00:31 +01:00
ce3f14e1c0
tune menu updated
2017-11-27 17:55:32 +01:00
67a2e0a706
settings menu updated
2017-11-27 17:01:01 +01:00
f075711e64
corrected menus
2017-11-27 16:37:46 +01:00
7c6d63ffb5
pla preheat temp. changed, temp calibration on/off moved to settings menu
2017-11-27 16:21:54 +01:00
044ed951cb
translations to czech language and menu corrections: initial version
2017-11-27 16:06:34 +01:00
Robert Pelnar
Michal Průša
PavelSindler
PavelSindler