8ec316773f
PINDA thermistor and ambient thermistor.
2017-09-05 14:02:35 +02:00
f563618b1c
PINDA thermistor + extruder current adjust.
2017-08-30 21:56:48 +02:00
683784c4c7
PAT9125 I2C, hardware SG homing
...
separate pin configuration file for each board
changed board codes:
RAMBO =100, MiniRambo1.0 =200, MiniRambo1.3 = 203, Einy03 =303, Einy04 =304
2017-08-17 15:23:34 +02:00
a7477673de
HW SG homing, SWSPI pins for EINY03/04
2017-07-18 13:54:01 +02:00
78f7923ab2
Merge pull request #10 from XPila/MK3
...
Changed jerks, disabled oversampling, debug code, commands for seting…
2017-07-06 13:07:37 +02:00
2b24e9ceb3
Changed jerks, disabled oversampling, debug code, commands for seting pwm_ampl and pwm_grad (M917, M918), changed configuration files
2017-07-06 13:06:07 +02:00
458dfa80f6
Merge branch 'MK3' into MK3
2017-07-06 12:55:30 +02:00
16fffed52d
current feedrate and fan speed stored to eeprom in power panic, number of blocks (linear movements) in planner serve for counting SD card recover position, print fan speed error limit prolonged to 15s
2017-07-05 15:04:43 +02:00
b8025e63e6
DEBUG defines, variant files for MK3
2017-07-04 16:23:28 +02:00
a8678cb2fd
recover print
2017-07-04 11:31:39 +02:00
d05e62813a
Merge remote-tracking branch 'upstream/MK3' into MK3
...
sync with upstream
2017-07-03 14:08:39 +02:00
e09f0c64c7
TMC2130 tuning, silent/high power mode
2017-07-03 07:43:50 +02:00
17074e1d25
saving/restoring filename and current position in bytes to eeprom, UVLO changed
2017-07-02 21:01:23 +02:00
ae0c64248f
sync with upstream
2017-07-01 19:29:57 +02:00
c4be651d2b
uvlo initial version
2017-07-01 18:51:02 +02:00
4f9a8147a4
renamed EINY 0.1a to EINY 0.3a
...
added EINY 0.4a
changed jerk (optimized for MK3 silent mode)
2017-07-01 17:28:32 +02:00
f6a8e1df9d
TMC2130 + software SG homing + LF lineendings + tmc2130 debug M-Codes
...
M910 - tmc2130_init
M911 - set holding currents
M912 - set running currents
M913 - print currents
2017-07-01 12:39:16 +02:00
43d696659f
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
21177476ac
StallGuard homing implemented, working
2017-06-17 16:58:36 +02:00
3e642d61cb
Stepper Y inverted, current lowered.
2017-06-17 15:58:26 +02:00
cabaec95c8
EINY implementation
2017-03-24 20:16:03 +01:00
3faef75a0d
3.0.10 sync
2017-03-24 19:47:50 +01:00
99ae9707de
Fixed a missing SD card error on start up, if the setup was blocked
...
by some dialog for an extended period of time.
Increased version to 3.0.8 final.
2016-09-01 16:52:46 +02:00
b470e103dc
Reset live adjust on XYZ calibration.
...
Disable timeouts in the XYZ/Z calibration.
Don't modify feed rate multiplier during the XYZ/Z calibration.
Support multi screen messages in the XYZ/Z calibration - "move the Z carriages up" step.
Support up to three lines in the XYZ/Z calibration messages.
Added a new message "Measuring reference height of calibration point xx of 9".
Changed the "move the Z carriages up" message to suggest rotating the knob.
Changed the "live adjust not set" message to reference the manual chapter and section.
Remove debugging serial line output on Z calibration.
2016-09-01 10:44:24 +02:00
26405ee16f
Syncing with 3.0.7 public
2016-08-31 17:12:05 +02:00
307d17422d
3.0.6 sync
2016-08-11 10:42:53 +02:00
30f0528aba
Initial commit
2016-07-22 15:28:01 +02:00
Robert Pelnar
PavelSindler
michalprusa
bubnikv