9bd4d580d7
Use right calibration point. This change is only formal, as both original and new point have same coordinates.
2018-04-23 20:33:25 +02:00
cccd8246ab
Fix world2machine(const float &x, const float &y, float &out_x, float &out_y) not using input parameters if only WORLD2MACHINE_CORRECTION_SHIFT is applied.
2018-04-23 20:33:14 +02:00
c88f0108af
Fix safety timer.
...
Constant parameter greater than 16 bits must by stated as unsigned long.
2018-04-13 19:30:08 +02:00
b1bb6841c9
Merge pull request #617 from mkbel/fix_farm_reset_1
...
Fix farm reset
2018-04-13 10:02:54 +02:00
388d6eea36
Fix printer resets in farm mode if command "PRUSA SN" is received and 32U2 processor is not responding.
2018-04-12 18:44:33 +02:00
08740356b8
Move "PRUSA SN" gcode to separate function.
2018-04-12 18:41:11 +02:00
6b5835fd9f
Merge pull request #612 from PavelSindler/M861_gcode
...
M861 gcode, temp cal is automaticly activated after calibration process
2018-04-11 18:45:57 +02:00
45d1dbbfe0
temp cal. active set to false
2018-04-11 18:37:07 +02:00
ce66699340
dont use default temp table for new printers and dont automaticly activate temp. cal. (new pinda probes have different characteristics)
2018-04-11 18:36:38 +02:00
47eab97d2d
temp. calibration is automaticly activated after calibration process
2018-04-11 18:16:16 +02:00
0ba7850146
pinda temp table changed back
2018-04-11 17:40:04 +02:00
c69524c3fb
Merge pull request #611 from XPila/MK3-V3_2
...
removed Configuration_prusa.h
2018-04-11 17:33:37 +02:00
89efcb84b1
removed Configuration_prusa.h
...
fixed - compilation for MK25
2018-04-11 17:32:31 +02:00
919fba531a
wait for PINDA gcode changed
2018-04-11 16:48:47 +02:00
f70685a92d
Merge pull request #542 from stahlfabrik/MK3_PINDA_TEMP_WAIT_GCODE
...
MK3 Add Gcode to wait for minimum PINDA temp
2018-04-11 16:40:21 +02:00
92997204a1
Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20
2018-04-03 12:30:35 +02:00
baade7db61
Removed unused files (ST7565R-dogm, digipot)
...
renamed functions digipot_init and digipot_current
fixed cond. trans. (menus)
fixed variant files - MK25, MK3
2018-03-29 23:01:13 +02:00
363a9d24b3
LiquidCrystal class renamed to LiquidCrystal_Prusa
2018-03-29 17:50:43 +02:00
186e630299
New SPI (do not use Arduino SPI class)
...
saved ~300bytes flash, 4bytes ram
2018-03-29 17:42:41 +02:00
06d5ec5659
Merge pull request #586 from mkbel/ustep_linearity_2
...
Ustep linearity
2018-03-28 19:38:34 +02:00
ffdd11e960
Merge pull request #587 from XPila/MK3-V3_2
...
Mk3 v3 2
2018-03-28 19:38:20 +02:00
bde097cad1
bugfix - PFW233 - first homing in silent mode Y crash.
2018-03-28 19:22:20 +02:00
9cb036fbcb
Merge remote-tracking branch 'prusa3d/MK3' into ustep_linearity_2
2018-03-28 19:11:02 +02:00
40a064ffbc
Add extruder linearity correction to settings menu.
2018-03-28 18:53:37 +02:00
678cd17e7b
Increase size of EEPROM_TMC2130_WAVE_*_FAC to 16 bits.
2018-03-28 16:13:16 +02:00
cf43b85de9
XYZ calibration - accuracy improvement
2018-03-27 17:27:41 +02:00
e5faba7226
serial port set back (was previously changed for debugging purposes)
2018-03-15 14:42:03 +01:00
08ec920d33
merge with upstream
2018-03-15 14:25:17 +01:00
67e90b576a
Disabled force selftest
...
XYZ calibration tunning
2018-03-14 16:25:32 +01:00
863fe1f054
show message that printer is not connected to monitoring on printer start
2018-03-14 15:35:39 +01:00
81cd96b8fe
Variant file for MK25 + cond. translation
2018-03-13 23:02:46 +01:00
ac1a56b493
Merge branch 'MK25' into MK3
2018-03-13 20:43:19 +01:00
f45f206faf
sorting files disabled in farm mode, start printer status needs reponse from monitoring
2018-03-13 18:50:11 +01:00
ddeb7b8c84
statistics improved, initial version of function which forces user to connect printer to monitoring
2018-03-13 18:43:42 +01:00
16f9f35451
static_assert replaced with error directive
2018-03-13 16:47:38 +01:00
0c97f46f25
Merge pull request #551 from XPila/MK3-new_xyz_cal
...
New XYZ calibration with image processing
2018-03-13 16:17:50 +01:00
65a91b366d
New XYZ calibration with image processing
2018-03-13 12:55:35 +01:00
6b08cdeaf1
Safety timer (disable heaters after 15min idle)
2018-03-12 23:45:10 +01:00
262e800db7
Safety timer (disable heaters after 15min idle)
2018-03-12 23:35:50 +01:00
1df91e5656
MK3 Add Gcode to wait for minimum PINDA temp
...
The PINDA temperature compensation is defined for values above 35C. To achieve an optimal first layer consistently it is vital to start the print with a temperature of >= 35C on the pinda probe.
When doing a manual pinda temperature calibration it is necessary to begin homing and mesh bed leveling at an exact temperature. This gcode is perfect for this.
Example startup code:
G28 W ; home all without mesh bed level
G0 Z50 ; raise Z to not heat PINDA before bed is warm
M104 S215 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S215 ; wait for extruder temp
G0 X50 Y50 Z0.15 ; this is a good PINDA heating position
M666 S35 ; the new code - wait until PINDA is >= 35C
G28 W ; home all without mesh bed level
G80 ; mesh bed leveling
See my forum post later for more explaination on my manual temperature calibration procedure. I will link it then.
2018-03-09 20:46:07 +01:00
976e5a6a19
Temperature calibration - remove steel
2018-03-07 21:45:55 +01:00
e3967e444b
SafetyTimer disabled
...
Watchdog disabled
watchdog.cpp and watchdog.h source code removed (using directly <avr/wdt.h>)
2018-03-07 14:13:34 +01:00
55065cf124
Merge pull request #530 from PavelSindler/temp_cal_fix
...
steps per unit changed to 0.95%; changed temp cal. warnings, changed …
2018-03-06 18:26:37 +01:00
27659ae69e
steps per unit changed to 0.95%; changed temp cal. warnings, changed pin for PINDA probe
2018-03-06 16:48:39 +01:00
a6f900fd3c
Merge remote-tracking branch 'upstream/MK25' into MK25
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2018-03-06 15:11:50 +01:00
2b7e50e45b
Fix of calculate_extrusion_multipliers().
...
This is a fix of a bug made in the previous commit.
2018-03-06 13:03:38 +01:00
67fd467ebe
Add fail statistics menu item for MK25.
...
As there is only filament sensor and no crash and power interruption detection, squash everything into single screen.
2018-03-05 21:42:04 +01:00
fc3af0533a
Fix of calculate_extrusion_multipliers().
...
This is a fix of a bug made in the previous commit.
2018-03-05 21:31:31 +01:00
0f082fa1f7
Merge pull request #518 from PavelSindler/auto_power_2
...
Auto power mode for MK25
2018-03-05 11:42:00 +01:00
917689b5ce
tune menu
2018-03-05 01:23:18 +01:00
Marek Bel
PavelSindler
XPila
PavelSindler
Christoph Stahl
bubnikv