28aec049a2
Fix Typo in MSG_FIL_FAILED
2021-04-23 09:41:12 +02:00
ff9185d1bb
Readded `>Cancel` as the `>` has some meaning. Sadly the previously 10bytes more free space are gone again
2021-04-23 08:50:50 +02:00
e18d688b64
Fix merge issues
2021-04-22 20:48:26 +02:00
681bc560c9
Merge remote-tracking branch 'upstream/MK3_3.10.0' into PFW-1189
2021-04-22 20:43:54 +02:00
00ce16ee55
Merge pull request #3121 from wavexx/reduce_m600_min_height
...
Revert/cleanup mininum extruder height during M600
2021-04-22 11:43:18 +02:00
8d04316497
Revert/cleanup mininum extruder height during M600
...
This change restores the minimum extruder height for filament purge
during M600 from the current 50mm back to 27mm from FW 3.9.
We do this by introducing a new option for unload_filament() to indicate
that the unload is part of an automatic swap, and in such cases avoid
raising more than absolutely necessary (this will _also_ come in handy
to avoid the extra purge in PR #2318 during M600).
A new define MIN_Z_FOR_SWAP is introduced for this purpose.
MIN_Z_FOR_UNLOAD is still used for manual lcd unload and for M702 and
hasn't been changed.
2021-04-21 19:07:58 +02:00
bc355674d9
Fix partial redraw during filament autoload
...
If the printer was already being pre-heated but didn't reach the target
temperature yet and a new filament is being inserted, the LCD used to
display a "Preheating to load" message to block the loading until the
extruder is hot.
This message is currently missing, and the ">Cancel" option doesn't
display immediately either, depending on the extruder height.
This PR fixes this behavior, which was broken during an earlier update.
We now force-update LCD updates during the first (and _only_) time the
screen is setup, and push all messages _before_ the carriage is
eventually raised, so that ">Cancel" is shown immediately as well.
2021-04-21 16:56:16 +02:00
9454f9d8ec
Rename w25x20cl to xflash
2021-04-06 10:16:47 +02:00
3b431bcbc1
Fix output "Y distance from min" by removing ":" so translations can use 20 chars
2021-03-31 08:54:16 +02:00
d864a5cfdb
Define #MSG_PRINTER_IP c=18
2021-03-31 08:46:17 +02:00
9922774fa7
Cleanup some comments ////c=
2021-03-31 08:11:19 +02:00
8e74cbce58
Remove r=1 and some minor fixes
2021-03-31 08:07:42 +02:00
fb691b44b4
Update #MSG_INFO_SENSORS c=18
2021-03-31 07:51:22 +02:00
3fb90be46f
Define #MSG_SELECT c=18
2021-03-31 07:50:18 +02:00
9a0e67c1d7
Define #MSG_RENAME c=18
2021-03-31 07:43:48 +02:00
cdfc40fb62
Define #MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
2021-03-31 07:38:41 +02:00
268d4020cf
Define #MSG_FINDA c=5 and update #MSG_PINDA c=5
2021-03-31 07:32:43 +02:00
c0b8eef6cd
Define #MSG_FALSE_TRIGGERING c=20
2021-03-31 07:29:42 +02:00
1ca443f1f4
Define #MSG_CHECKS c=18
2021-03-31 07:28:18 +02:00
5e049283be
Define #MSG_UNKNOWN c=13
2021-03-31 07:24:41 +02:00
982153fee1
Define and update #MSG_PRINT_TIME c=19, #MSG_FILAMENT_USED c=19, #MSG_TOTAL_FILAMENT c=19, #MSG_TOTAL_PRINT_TIME c=19
2021-03-31 07:16:36 +02:00
7a88ce89e4
Update MSG_TEMPERATURE c=18
2021-03-31 07:11:01 +02:00
c0df79d39a
Define #MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
2021-03-31 07:10:03 +02:00
7268f6a824
Define #MSG_SELECT_FILAMENT c=20
2021-03-31 07:08:09 +02:00
2e43234d3f
Update #MSG_SUPPORT c=18
2021-03-31 07:06:46 +02:00
ba38262109
Update #MSG_STATISTICS c=18
2021-03-31 07:05:28 +02:00
960ebac02d
Update #MSG_SPEED c=15
2021-03-31 07:04:47 +02:00
acbdc2ac8d
Define #MSG_RUNOUTS c=7
2021-03-31 06:59:16 +02:00
09f4850a8a
Define #MSG_SLIGHT_SKEW c=13, #MSG_SEVERE_SKEW c=13
2021-03-31 06:53:04 +02:00
4749dd1750
Define #MSG_CHECK_IR_CONNECTION c=20 r=4
2021-03-31 06:46:43 +02:00
bd8ab39b39
Define #MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
2021-03-31 06:45:33 +02:00
5280a89fba
Define #MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
2021-03-31 06:43:21 +02:00
4f394c8c5a
Update #MSG_TUNE c=18, #MSG_PREHEAT c=18
2021-03-31 06:38:50 +02:00
fbecae1707
Update MSG_PREHEAT c=18
2021-03-31 06:38:06 +02:00
ac810bf03a
Define #MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
2021-03-31 06:36:28 +02:00
00b100bf26
Define #MSG_NOZZLE_FAN c=10, #MSG_PRINT_FAN c=10
2021-03-31 06:30:00 +02:00
baf231b0f1
Update MSG_NO_CARD c=18
2021-03-31 06:23:18 +02:00
1c09e8411d
Define #MSG_PINDA c=6 and remove duplicate saved 8 bytes
2021-03-30 19:30:26 +02:00
6a266d497b
Define #MSG_REMOVE_TEST_PRINT c=20 r=4
2021-03-30 19:19:43 +02:00
5fcc731be1
Define #MSG_INSERT_FIL c=20 r=6
2021-03-30 19:17:48 +02:00
243fa68745
Define #MSG_LIN_CORRECTION c=18
2021-03-30 19:16:11 +02:00
44f7be134d
Define #MSG_FS_VERIFIED c=20 r=3
2021-03-30 19:13:31 +02:00
bcdaecb46d
Define #MSG_TO_LOAD_FIL c=20, #MSG_TO_UNLOAD_FIL c=20, #MSG_PRESS_KNOB c=20
2021-03-30 19:10:56 +02:00
de9697b913
Define #MSG_PREHEATING_TO_LOAD/UNLOAD/CUT/EJECT c=20
2021-03-30 19:06:46 +02:00
e9750a7312
Update #MSG_FIL_FAILD c=20 r=5
2021-03-30 18:52:58 +02:00
4a5d7bc6b7
Define #MSG_Y_DIST_FROM_MIN c=20
2021-03-30 18:51:04 +02:00
7f3fe6740b
Update #MSG_NO_MOVE c=20
2021-03-30 18:46:56 +02:00
1a1a1d88a7
Update MSG_MOVE_X/Y/Z c=18
2021-03-30 18:13:49 +02:00
c1f22a5239
Update #MSG_MOVE_AXIS c=18
2021-03-30 18:12:03 +02:00
99893d5066
Define #MSG_MMU_CONNECTED c=18
2021-03-30 18:11:22 +02:00
4d9dffb042
Define #MSG_MEASURED_SKEW c=13
2021-03-30 18:06:43 +02:00
afb7c82e26
Update #MSG_LOAD_TO_NOZZLE c=18
2021-03-30 18:00:20 +02:00
2408bc9f2e
Update MSG_LOADING_COLOR c=20
2021-03-30 17:58:51 +02:00
c4f80642b3
Update #MSG_MAIN c=18
2021-03-30 09:52:52 +02:00
6900c206cd
Define #MSG_SEL_PREHEAT_TEMP c=20 r=6
2021-03-30 09:36:32 +02:00
12dc48ff1a
Update #MSG_BELTTEST c=18
2021-03-30 09:34:41 +02:00
b697117654
Update #MSG_SELFTEST c=18
2021-03-30 09:33:49 +02:00
9bc702ae0a
Update #MSG_SELFTEST_OK c=20
2021-03-30 09:32:27 +02:00
00fedbb08a
Update MSG_LANGUAGE_SELECT c=18
2021-03-30 09:30:04 +02:00
164226c739
Define #MSG_RIGHT c=10
2021-03-30 09:29:07 +02:00
2daf1d9114
Define #MSG_LEFT c=10
2021-03-30 09:26:50 +02:00
169f8983b6
Define #MSG_ADDITIONAL_SHEETS c=20 r=9
2021-03-30 09:23:35 +02:00
0139bb5a5e
Update #MSG_CHANGE_SUCCESS c=20
2021-03-30 09:20:57 +02:00
280a3c4d3a
Update #MSG_PRUSA3D_HOWTO c=18
2021-03-30 09:16:14 +02:00
12bd2f1a09
Update #MSG_PRUSA3D c=18
2021-03-30 09:15:21 +02:00
4e4fb7a59f
Update #MSG_PRUSA3D_FORUM c=18
2021-03-30 09:14:20 +02:00
10c586b577
Update #MSG_FLOW c=15
2021-03-30 09:13:09 +02:00
7a99f63ffd
Define #MSG_FAIL_STATS c=18
2021-03-30 09:06:59 +02:00
d427563e2b
Define #MSG_MMU_FAIL_STATS c=18
2021-03-30 09:05:18 +02:00
b6031c02a8
Update #MSG_DISABLE_STEPPERS c=18
2021-03-30 08:59:27 +02:00
411caddc55
Define #MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
2021-03-30 08:14:46 +02:00
2d2dc23e81
Define #MSG_CALIBRATING_HOME c=20
2021-03-30 08:12:20 +02:00
c8af50d344
Define #MSG_COPY_SEL_LANG c=20 r=3
2021-03-30 08:09:08 +02:00
5f9b66a23a
Update #MSG_NOT_COLOR c=19
2021-03-30 08:04:39 +02:00
02ff05639b
Define MSG_CHECKING_FILE c=17
2021-03-30 08:01:26 +02:00
f2298b1a46
Update #MSG_SD_REMOVED c=20
2021-03-30 07:57:42 +02:00
3733c42d38
Update #MSG_HOMEYZ_DONE c=20
2021-03-30 07:54:11 +02:00
fa0382fd3e
Update #MSG_CALIBRATE_BED c=18
2021-03-30 07:50:54 +02:00
7c906dd0b1
Update #MSG_BED_CORRECTION_MENU c=18
2021-03-30 07:44:16 +02:00
ba0f2b2501
Update MSG_LOOSE_PULLEY c=20
2021-03-20 07:11:41 +01:00
3fcc81ebdb
Update MSG_SELFTEST_ENDSTOP c=16
2021-03-20 07:11:07 +01:00
17df4e1c8d
Update MSG_SELFTEST_ENDSTOPS c=20
2021-03-20 07:10:09 +01:00
4a6c53daf8
Update MSG_SELFTEST_PLEASECHECK c=20
2021-03-20 07:09:33 +01:00
b3d3feef4d
Update MSG_SELFTEST_ERROR c=20
2021-03-20 07:08:48 +01:00
5d167ce813
Update MSG_SELFTEST_NOTCONNECTED c=20
2021-03-20 07:08:20 +01:00
625604d704
Update MSG_SELFTEST_HEATERTHERMISTOR c=20
2021-03-20 07:07:14 +01:00
b86ad11b68
Update MSG_SELFTEST_BEDHEATER c=20
2021-03-20 07:06:37 +01:00
b3b062e4ba
Update MSG_SELFTEST_SWAPPED c=16
2021-03-20 07:05:47 +01:00
b6684f6114
Update MSG_SELFTEST_AXIS c=16
2021-03-20 07:05:03 +01:00
bc9f6b6ae6
Update MSG_SELFTEST_AXIS_LENGTH c=20
2021-03-20 07:03:47 +01:00
fe1b4e50be
Update MSG_AMBIENT c=14
2021-03-20 06:59:54 +01:00
178fe36dc7
Create MSG_CANCEL c=9
...
Delete ">Cancel"
Samed 10 bytes
Updated MSG_MEASURED_OFFSET c=20
2021-03-20 06:30:26 +01:00
1c965cd988
Update MSG_MEASURED_OFFSET c=20
2021-03-20 06:18:41 +01:00
92acac453f
Update MSG_MMU_POWER_FAILS c=15
2021-03-20 06:16:11 +01:00
b806c017cb
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
...
as Polish translation is longer
2021-03-19 18:47:58 +01:00
542ff58529
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
...
as Polish translation is longer
2021-03-19 18:47:09 +01:00
147fddd060
Update MSG_CALIBRATE_BED_RESET c=18
2021-03-19 18:41:01 +01:00
41022d7d60
Update "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
...
as French translation is longer
2021-03-19 18:07:04 +01:00
813aabab56
Update "Select nozzle preheat temperature which matches your material." c=20 r=6
...
as Spanish translation is longer
2021-03-19 18:03:06 +01:00
d52a7326be
Update "Please insert filament into the extruder, then press the knob to load it." c=20 r=6
...
as German translation is longer
2021-03-19 17:55:03 +01:00
3d-gussner
DRracer
Yuri D'Elia
Alex Voinea