730f6a0d10
Hyperfine, Filament Runout Sensor, some fixes...
...
and preparing for multiple hex files depending on needed languages
2017-10-14 12:13:18 +02:00
50d23b6592
Merge branch 'MK2-ALL_IN_ONE' into MK2-Hyperfine
2017-10-10 14:03:30 +02:00
67bea348f7
Thess warning cleanup
2017-10-08 10:11:48 +02:00
4af075a316
fixed typos, removed M84 pin usage for MM
2017-09-14 19:55:03 +02:00
827a9ce6cb
added confirm character for messages which waits for user to press the knob
2017-09-13 15:41:19 +02:00
10e183c97e
Merge remote-tracking branch 'refs/remotes/prusa3d/MK2' into MK2-ALL_IN_ONE
2017-09-11 11:28:45 +02:00
33168bedbd
Show filename during print fixed, sorting files on Sd card in farm mode fixed
2017-08-31 16:12:52 +02:00
87cadb1f68
statistics improved, initial version of function which forces user to connect printer to monitoring
2017-08-29 15:52:53 +02:00
16bfa6c08b
Added PID tuning for heated bed
2017-08-23 15:51:11 +02:00
9753446e2e
Merge pull request #174 from PavelSindler/MK2
...
Sorting files in SD card menu; xyz cal. details menu updated show real skew even if axes were orthogonalized during cal.
2017-08-15 16:31:00 +02:00
8685c428a6
Revert "merging with upstream"
...
This reverts commit cdb4cb7864
2017-08-15 16:27:55 +02:00
cdb4cb7864
merging with upstream
2017-08-15 15:24:32 +02:00
d56db4638c
sorting by creation time, progress bar, sorting type swith
2017-08-10 11:53:37 +02:00
ba636f175c
Fan kick improvement - long pulse (800ms) when starting, short pulse (50ms) every 4s when speed < 25.
...
Debug macros, debug codes (D0 - reset, D1 - clear eeprom, D2 - get/set pin).
2017-08-01 17:24:19 +02:00
625b8acc8e
eeprom version for multimaterial changed, show message that hardcoded default settings were loaded during printer setup, improved scrolling in sd card menu
2017-07-19 16:59:53 +02:00
67c3e75a20
added space to printing pinda preheat time
2017-05-18 20:06:31 +02:00
2fa97d5dfe
Added messages in czech and english for SNMM, service menu for adjusting bowden lengths; updated service menu to be extendable; M600: loading filament for SNMM updated; unload all filaments updated
2017-05-02 19:21:52 +02:00
397039270a
PINDA Preheating countdown updated
2017-04-27 14:16:12 +02:00
50b7f627cd
pinda preheating messages changed
2017-04-25 22:00:05 +02:00
c03a18f8c3
czech messages added, temperature calibration is off in fresh eeprom, pinda preheat phase is not used unless calibration was run, pause print works with gcode absolute and relative extruder mode, move z higher after selftest
2017-04-19 16:15:11 +02:00
fc221fbea5
Merged PINDA temp calibration branch into MK2
2017-04-10 11:10:03 +02:00
7b962d666f
pause print statistics
2017-04-07 14:56:52 +02:00
08a59f7fef
status messages for temp calibration added, initial versoin of temp calibration on/off from menu
2017-04-06 18:57:11 +02:00
56f5975083
XYZ calibration first round: if least square error is bigger than threshold value, run another iteration
2017-04-05 18:35:26 +02:00
d9fc29273e
statistics for stop print changed
2017-04-04 13:41:20 +02:00
870f85ce61
PID tuning from menu
2017-03-31 17:12:16 +02:00
6ffc022633
stop print statistics needs to finish, lcd_licked function improved to work with long press button, selftest bug fixed; stop print, pause print and live adjust are hidden in mesh bed leveling and auto home
2017-03-30 16:48:10 +02:00
c710e80bc5
Three digit farm numbers support
2017-02-27 17:55:05 +01:00
fcce374a14
initial version - merging from DEV multicolor
2017-01-09 13:12:39 +01:00
734ca2eb43
Added link monitor to farm mode
2016-12-14 14:59:01 +01:00
e0bb76032c
Reset live adjust on XYZ calibration.
...
Disable timeouts in the XYZ/Z calibration.
Don't modify feed rate multiplier during the XYZ/Z calibration.
Support multi screen messages in the XYZ/Z calibration - "move the Z carriages up" step.
Support up to three lines in the XYZ/Z calibration messages.
Added a new message "Measuring reference height of calibration point xx of 9".
Changed the "move the Z carriages up" message to suggest rotating the knob.
Changed the "live adjust not set" message to reference the manual chapter and section.
Remove debugging serial line output on Z calibration.
Removed the non-working pressure advance feature.
Improved accuracy of diagonal moves by oversampling the path discretization.
Accelerated the planner by rewriting time critical routines from floating
point to fixed point arithmetics.
2016-09-01 17:05:15 +02:00
053c727fed
Bed MINTEMP implemented, MAXTEMP behaviour changed, loading filament bug fixed, Extruder max feedrate increased and Italian language strings fix.
2016-08-07 20:20:48 +02:00
805cdadb6f
Show "Calibrating nth point" on the display when running G80
...
if initiated from SD card. Don't show Z height during the calibration.
Update status of the Toshiba FlashAir on sd card insert / removal.
2016-08-02 15:08:34 +02:00
077560ce4c
Improvement of baby stepping:
...
1) Fix of stepper control timing
2) Load / restore baby stepping after 9 point bed leveling using
the planner instead of the questionable baby stepping routine.
Improvement of the menu system: Use a shared menuData union to preserve
memory. Adaptation of baby stepping and edit menus to menuData.
Improvement of the "Toshiba FlashAir" status display. Don't force IP
address query on each display refresh when in the "Support" menu.
Bugfix of the baby stepping menu: Show the correct value instead
of zero when the baby stepping menu is entered.
New feature: Bed leveling adjustment at left / right / front / rear side.
The bed adjustment feature is accessible from the Settings menu
and as L R F B codes of the G80 code.
2016-08-02 12:19:17 +02:00
5c56e472fe
Show the Toshiba FlashAir IP address in the menu.
2016-07-22 10:31:30 +02:00
1b2676baac
Farm monitoring
2016-07-20 15:02:52 +02:00
0b372bfc94
Added a new feature to the "M115" code:
...
"M115 Umajor.minor.revision-flavor" will trigger a dialog
on the display if the "upgrade" firmware version number is higher
than the current version number.
2016-07-07 20:26:59 +02:00
6cff4b92ff
Automatic bed calibration by searching the 3x3 point matrix.
...
Fixed a problem with low RAM by re-vamping the langtool.
2016-06-16 14:29:04 +02:00
a4a80b3eb7
MK2 Firmware release.
2016-05-31 14:08:04 +02:00
9b8d663526
Better live adjust Z interface
2016-05-01 13:56:55 +02:00
f8c65e39ae
Reorginized the repository and added license
2016-02-21 15:02:31 +01:00
3d-gussner
3d-gussner
PavelSindler
PavelSindler
Robert Pelnar
michalprusa
bubnikv
akukan
Josef Prusa