2610547a48
Fixed displayed filament after load
2018-08-26 16:39:21 +02:00
c57fdb11b7
show active extruder: numbers corrected
2018-08-26 14:22:52 +02:00
85358342bc
Merge pull request #1065 from PavelSindler/mmu_v2_continue_loading
...
Mmu v2: continue loading command
2018-08-25 20:03:12 +02:00
cf83852d22
Merge pull request #1068 from PavelSindler/M600_fix
...
M600 fix: remove unretract
2018-08-25 20:02:30 +02:00
ddcdfce356
Merge pull request #1069 from PavelSindler/mmu_timeout
...
5 minutes mmu timeout
2018-08-25 20:02:12 +02:00
0929a35a4f
5 minutes mmu timeout
2018-08-25 17:21:17 +02:00
815167c4b6
Merge pull request #1066 from mkbel/fix_linearity_correction_2
...
Fix linearity correction 2
2018-08-25 16:56:40 +02:00
255cd2f34e
Merge pull request #1056 from mkbel/prdel
...
Reserve space for MENU_ITEM_EDIT_int3_P in shared memory
2018-08-25 16:55:56 +02:00
f3edd37d11
removing unretract
2018-08-25 16:52:19 +02:00
1f5bece0db
check for required mmu2 firmware buildnr
2018-08-25 16:15:35 +02:00
5fe6a3ed1c
Place similar functions together.
2018-08-24 22:04:48 +02:00
ea88dea432
Fix memory overwrite.
2018-08-24 21:24:14 +02:00
085c77effb
Fix when value edited, other values appeard as +1.000 instead of [off].
2018-08-24 20:38:07 +02:00
df61172984
Fix linearity correction not saved and applied when menu was left by timeout.
2018-08-24 20:31:49 +02:00
32723d8d6f
whitespace
2018-08-24 20:30:44 +02:00
46a3baac57
Add menu_item_edit_P<uint8_t*> specialization to be used for linearity correction. Works well, but costs about 600..700B of FLASH, needs to be optimized.
2018-08-24 20:06:09 +02:00
0c80eca648
merge with upstream
2018-08-24 18:30:03 +02:00
68f2e22dad
continue loading command
2018-08-24 18:28:05 +02:00
5a7c9e3ffd
Make local functions static. Saves 30B of flash with Arduino 1.6.9. No difference with Arduino 1.8.5.
2018-08-24 18:00:05 +02:00
5daae818e1
Convert menu_item_edit to template function.
2018-08-24 17:40:40 +02:00
ac5cb0989e
Uncomment linearity correction menu. Fix return from linearity correction menu.
2018-08-24 16:00:51 +02:00
050a7c41d0
Fix "Check MMU. Fix the issue and then press button on MMU unit." shown instead of "Loading filament 1".
2018-08-24 03:49:51 +02:00
142bf28dc2
Clear communication buffer when sending load filament command to MMU.
...
This fixes PFW-517 in the moment, when the problem with not displaying "Loading filament 1" to "Loading filament 5" has appeared for the first time.
2018-08-23 22:05:56 +02:00
5dc2af961b
ShippingPrepare & M600
...
message after ShippingPrepare
M600 :: better filament (un)retraction
2018-08-23 00:08:14 +02:00
3780516f74
PFW-512 Reserve space for MENU_ITEM_EDIT_int3_P in shared memory in lcd_tune_menu().
2018-08-22 19:47:29 +02:00
07d07831f1
Add portability note.
2018-08-22 19:40:12 +02:00
bb5ac93921
Add missing compile time check for ShortTimer fitting into menu_data. Convert preprocessor checks to shorter and more accurate static_assert. Remove redundant macro MENU_DATA_EDIT_SIZE. Decrease scope of menu_stack and asociated macro. No functional change.
2018-08-22 18:55:42 +02:00
3477f84143
Merge pull request #1055 from XPila/MK3
...
MMU - communication fix + active extruder status
2018-08-22 16:48:09 +02:00
dfb4bfac5b
MMU - display status while switching active extruder [PFW-465]
2018-08-22 16:38:34 +02:00
a1190e9a22
Merge pull request #1052 from PavelSindler/mmu_v2
...
fixes and improvements for multimaterial
2018-08-22 14:28:33 +00:00
7836742621
MMU communication fix - WD reset inside manage_response
2018-08-22 16:19:57 +02:00
9210ab12a9
Merge pull request #1053 from mkbel/MK3
...
Hot fix PFW-505 Speed change after tuning (on USB).
2018-08-22 16:19:08 +02:00
a81b8dbd61
remove manage_heater
2018-08-22 16:09:38 +02:00
ef6188cd59
Hot fix PFW-505 Speed change after tuning (on USB).
...
When encoder is rotated left and pushed immediately on status screen, after returning to status screen print speed jumps to 345%.
This is caused by downcasting signed lcd_encoder to unsigned position and back to signed lcd_encoder.
2018-08-22 16:09:19 +02:00
d2aeb40bee
manage response function update
2018-08-22 15:46:36 +02:00
f99196a7a0
fix reseting during filament change
2018-08-22 11:09:12 +02:00
315bfc43dd
MMU communication fix
2018-08-21 16:41:01 +02:00
94423e6f7e
MMU communication - mmu_ready
2018-08-20 20:53:53 +02:00
1cd0c6cfea
Status screen - print active MMU exrtuder (1/2 PFW465)
2018-08-20 00:59:36 +02:00
c4281b0b36
Status screen redesign - fix of flickering and text wraping on status screen
...
printf formating, saved flash, reduced code size
2018-08-20 00:27:45 +02:00
fd9516f520
Status screen - status message logic simplification
...
added definitions of custom_message_type values
removed flag custom_message (previous solution maybe caused displaying of empty status line)
fixed in Marlin_main.cpp code "custom_message = _T(MSG_TEMP_CALIBRATION)"
2018-08-19 18:34:57 +02:00
f1ad1d22ba
Menu lcd_adjust_bed fixed (Bed level correction, PFW-499)
2018-08-19 13:59:33 +02:00
a11ae18f7e
XYZ calibration fix (progmem constants declaration) + version changed
2018-08-13 14:55:31 +02:00
b7f17292ca
Version changed
2018-08-10 20:08:10 +02:00
8409a26594
Live adjust Z - display zero in case of invalid calibration status (same logic in babystep_load and _lcd_babystep)
2018-08-10 19:55:50 +02:00
b16fec956c
Enabled pullup for RX2 pin (it prevents uart2 from rx buffer overflow in case of disconnected MMU)
2018-08-10 16:20:53 +02:00
923a06c164
menu data shared memory re-design
...
+code cleaning
2018-08-10 02:59:49 +02:00
9ee7a2124b
removed unused code
2018-08-09 18:43:07 +02:00
796079bb08
MMU2 communication - connection after reset, fw versions, state machine
...
+removed debug log from tmc2130
2018-08-09 17:43:43 +02:00
10cc077ee4
mmu_enabled = true removed
2018-08-08 21:05:25 +02:00
4e32fb7181
removed '!' signalization when accel/feedrate limits reached
2018-08-08 20:23:13 +02:00
310751397c
line endings + fixed declaration
2018-08-08 20:11:57 +02:00
990a5c9119
PFW489 (github issue 1008) - time remaining variables declared as uint32
2018-08-08 19:51:50 +02:00
2f17997622
reset safety timer everytime lcd clicked
2018-08-08 19:33:44 +02:00
ca25ec90bd
Disabled timeouts in support and failstats menus
2018-08-08 19:28:34 +02:00
23e5cea5d0
MMU - code cleaning (modularity)
...
M403 set filament type
hardware reset
2018-08-08 18:58:03 +02:00
9e09efc9f4
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
...
conflicts + fix
2018-08-07 20:55:08 +02:00
71f1a1f6db
MMU - communication, check after start, code cleaning
2018-08-07 20:37:59 +02:00
4cc127feac
Merge pull request #817 from 3d-gussner/MK3_fix6
...
Fix MK3 compilation issue with Arduino 1.8.x
2018-08-07 20:02:52 +02:00
d21e527c73
PRUSA Fir reports also buildnumber
2018-08-05 20:17:04 +02:00
0c2d0bebce
merge with upstream fix
2018-08-03 19:14:17 +02:00
cf06c5171c
merge with upstream
2018-08-03 18:43:09 +02:00
a1f69e0924
manage response update
2018-08-03 18:37:52 +02:00
5824da8310
add more extrusion to M600 load filament
2018-08-03 15:42:06 +02:00
dd4c4b39b4
Added support for the upstream Marlin interpretation of the M204 code:
...
M204 S.. T..:
T is interpreted the old way (as acceleration when retracting)
only if an S code is found at the same line.
This allows PrusaResearch to interpret the legacy G-codes generated
by our older Slic3r with older Slic3r profiles.
M204 P.. R.. T..:
T is ignored, P is interpreted as acceleration when extruding,
R is interpreted as acceleration when retracting.
This will be the format the Slic3r 1.41.0 will produce from
the Machine Limits page.
In the future both MK3 firmware and Slic3r will likely be extended
to support the separate travel acceleration.
This change will help us to solve the following Slic3r issue:
https://github.com/prusa3d/Slic3r/issues/1089
2018-08-03 15:33:41 +02:00
ae7561bb27
M600 fix: set hotend temperature to correct value, manage_response function fix: now works in case that user presses button on mmu unit before he is asked to do it, compiler warnings (uninitialized variables) fixed
2018-08-03 15:26:39 +02:00
468873ec68
MMU2 - removed conditional translation for SNMM_V2, new module mmu
2018-08-02 18:54:00 +02:00
282ff6c577
removed unused union
2018-08-02 17:09:02 +02:00
d378575a68
SNMM_V2 - default retraction declared as variable
2018-08-02 17:07:09 +02:00
10af023eae
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
2018-08-02 16:32:59 +02:00
1685f83020
Merge pull request #971 from mkbel/fix_menuData_compiler_warnings
...
Fix 98 compiler warnings of type: warning: dereferencing type-punned …
2018-08-02 09:42:54 +02:00
ef8921d45e
Fix 10 compiler warnings of type: sketch/menu.cpp: In function 'void _menu_edit_int3()':
...
sketch/menu.cpp:272:51: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
#define _menu_data (*((menu_data_edit_t*)menu_data))
2018-08-01 22:43:36 +02:00
93d2b37b5c
Fix 98 compiler warnings of type: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
2018-08-01 22:43:27 +02:00
bafd290141
Sound
...
& TuneMenu
2018-08-01 22:34:58 +02:00
ac60b3ebe7
Merge pull request #996 from PavelSindler/snmm_v2
...
M600 updated
2018-08-01 19:39:08 +02:00
618aea25d6
Merge pull request #995 from PavelSindler/filament_type
...
snmm v2: send filament type to mmu
2018-08-01 19:33:44 +02:00
24e7f0d0ec
mmures fix
2018-08-01 19:29:50 +02:00
06063118bd
M600 updated
2018-08-01 18:47:28 +02:00
ca97e2232f
Merge remote-tracking branch 'ledvinap/MK3' into fix_compiler_warnings
2018-08-01 18:44:05 +02:00
b0077182e5
Merge branch 'Fix_warnings_ledvinap' into fix_compiler_warnings
2018-08-01 17:53:49 +02:00
1a2d7657dc
Merge branch 'Fix_warnings_ledvinap' into fix_compiler_warnings
2018-08-01 17:39:54 +02:00
6f824730af
Merge branch 'Fix_warnings_ledvinap' into fix_compiler_warnings
2018-08-01 17:37:09 +02:00
a8f73b3915
Merge branch 'Fix_warnings_ledvinap' into fix_compiler_warnings
2018-08-01 17:19:34 +02:00
97ec616dd1
Merge branch 'Fix_warnings_ledvinap' into fix_compiler_warnings
2018-08-01 17:14:36 +02:00
ab5593e673
Merge branch 'Fix_warnings_ledvinap' into fix_compiler_warnings
2018-08-01 16:58:09 +02:00
54adb0beea
missing eol added
2018-08-01 16:54:26 +02:00
b7ba0c5f14
Merge branch 'Fix_warnings_ledvinap' into fix_compiler_warnings
2018-08-01 16:50:44 +02:00
b35ef498f0
comments updated
2018-08-01 16:46:46 +02:00
665a885a21
Merge commit 'baddf38dbc2c72ab095deaf9b3e251ea2faeb699' into fix_compiler_warnings
2018-08-01 16:44:17 +02:00
98e921d456
Merge branch 'Fix_warnings_ledvinap' into fix_compiler_warnings
2018-08-01 16:24:07 +02:00
135c4db5da
gcode for filemant type initial version: just re-sending information to mmu
2018-08-01 15:43:13 +02:00
43cc789602
feedrate symbol changed back to double-arrow
2018-08-01 15:15:54 +02:00
0e059f8da6
single material fix: remove semicolon, unload_filament() function definition
2018-08-01 11:33:58 +02:00
1f5026eed7
Merge pull request #991 from XPila/MK3-new_lang
...
FSensor improvement
2018-08-01 10:43:34 +02:00
d363bd071d
Merge pull request #990 from PavelSindler/snmm_v2
...
Snmm v2: M600, communication timeouts with mmu
2018-08-01 10:43:22 +02:00
e153a29bdb
messages corrected, 5 minutes timeout when communicating with mmu
2018-08-01 10:42:09 +02:00
45ac42caff
snmm v2: manage response: wait for nozzle temp only when heating
2018-08-01 09:58:07 +02:00
c2fe3b920c
FSensor - chunk defined in mm, runout detection distance tunning
2018-08-01 01:24:35 +02:00
9509a60549
FSensor improovement
...
autoload sensitivity decreased (false triggering on MK25)
filtering algorithm more robust
additional check - fixed sync with autoload and better condition
2018-07-31 20:23:31 +02:00
be1167fae3
M600 for multimaterial: don't check if filament unload was succesfull
2018-07-31 19:18:09 +02:00
b99b73c924
missing declaration
2018-07-31 19:03:53 +02:00
40da6deef8
timeouts used when getting response from mmu, M600 improvements, no filament sensor in variants file
2018-07-31 19:00:42 +02:00
7731898b58
FSensor - optical quality meassurement - ignore reflexivity for materials with low data deviation
2018-07-31 16:28:11 +02:00
04d0178150
automatic M600 initial version
2018-07-31 12:24:22 +02:00
fa30353646
Live adjust Z format fix
2018-07-30 19:24:04 +02:00
67f56d3de9
merge with upstream
2018-07-30 17:24:58 +02:00
9195167541
Merge pull request #984 from MRprusa3d/MK3
...
Sound
2018-07-30 10:55:06 +02:00
f5ed37a88f
Sound
...
"stepper.cpp" revert (debug mode only)
2018-07-30 10:52:31 +02:00
970ba6fa2a
Sound
...
all cases
2018-07-29 22:59:14 +02:00
dd23835480
fsensor - fix - do not report poor filament response when disabled
2018-07-27 20:53:25 +02:00
26bc28cf89
menu_draw_float31 fixed (one digit after decimal point instead of thre)
2018-07-27 20:28:44 +02:00
e73f84279e
EEPROM offset fixed - added dummy lcd_contrast
2018-07-26 21:05:16 +02:00
4fb27866f4
Merge pull request #972 from PavelSindler/end_file_section
...
End file section for searching M84 in gcode file enlarged
2018-07-26 19:59:37 +02:00
5bc40aff85
Merge pull request #975 from XPila/MK3-new_lang
...
EEPROM dump (code D3)
2018-07-26 19:59:09 +02:00
2f9003dbdd
fsensor - better state handling
2018-07-26 19:50:33 +02:00
f819b6b304
debug output from EEPROM_WRITE_VAR and EEPROM_READ_VAR
2018-07-26 19:43:33 +02:00
d51b2666ac
no levels used in store settings function
2018-07-26 19:09:52 +02:00
1232d2dae6
M503: print autoretract value fixed
2018-07-26 17:26:05 +02:00
9235ffb497
T code for SNMM_V2 fix
2018-07-26 17:03:43 +02:00
285f2ccbd9
Merge pull request #976 from PavelSindler/MK3_for_merging
...
config for mmu updated
2018-07-26 15:00:33 +02:00
5bda19b9f7
config for mmu updated
2018-07-26 14:59:49 +02:00
691e7a24ed
EEPROM dump (code D3)
2018-07-26 13:20:35 +02:00
9c1ef5e414
Merge pull request #974 from mkbel/fix_compiler_warnings
...
Save 88B FLASH and fix compiler warnings:
2018-07-26 09:41:31 +02:00
cadb2e9cfe
Merge pull request #973 from MRprusa3d/MK3
...
PowerPanic IV
2018-07-26 09:40:57 +02:00
716e6c209c
Save 88B FLASH and fix compiler warnings:
...
sketch/cmdqueue.cpp: In function 'bool cmdqueue_pop_front()':
sketch/cmdqueue.cpp:67:56: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (++ bufindr; bufindr < sizeof(cmdbuffer) && cmdbuffer[bufindr] == 0; ++ bufindr) ;
^
sketch/cmdqueue.cpp: In function 'bool cmdqueue_could_enqueue_back(int, bool)':
sketch/cmdqueue.cpp:170:63: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
endw + CMDBUFFER_RESERVE_FRONT <= sizeof(cmdbuffer) ||
^
sketch/cmdqueue.cpp:172:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
(endw <= sizeof(cmdbuffer) && CMDBUFFER_RESERVE_FRONT <= bufindr))
^
sketch/cmdqueue.cpp:196:63: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
endw + CMDBUFFER_RESERVE_FRONT <= sizeof(cmdbuffer) ||
^
sketch/cmdqueue.cpp:198:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
(endw <= sizeof(cmdbuffer) && CMDBUFFER_RESERVE_FRONT <= bufindr))
^
sketch/cmdqueue.cpp: In function 'void get_command()':
sketch/cmdqueue.cpp:380:10: warning: variable 'rx_buffer_full' set but not used [-Wunused-but-set-variable]
bool rx_buffer_full = false; //flag that serial rx buffer is full
^
sketch/cmdqueue.cpp: In function 'uint16_t cmdqueue_calc_sd_length()':
sketch/cmdqueue.cpp:697:54: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (++ _bufindr; _bufindr < sizeof(cmdbuffer) && cmdbuffer[_bufindr] == 0; ++ _bufindr) ;
^
2018-07-25 21:18:29 +02:00
5be82962ee
PowerPanic IV
2018-07-25 19:24:41 +02:00
da82062d41
End file section for searching M84 in gcode file were enlarged (compatibility with mmu Slic3r)
2018-07-25 18:26:22 +02:00
9b4f786325
Merge pull request #970 from mkbel/fix_compiler_warnings
...
Fix compiler warnings
2018-07-25 17:08:07 +02:00
59c0127b77
automatic M600 for mmu v2: work in progress
2018-07-25 16:48:39 +02:00
620c015b65
Fix compiler warning: sketch/ultralcd.cpp:855:31: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
...
for (int dots = 0; dots < heating_status_counter; dots++)
2018-07-25 16:30:50 +02:00
58155cacbc
Fix compiler warning sketch/ultralcd.cpp:6711:24: warning: suggest parentheses around comparison in operand of '^' [-Wparentheses].
...
Add parentheses to match expressions on following lines. This changed expression, as == has precedence over ^, but truth table of expression is anyway the same regardless of parentheses.
2018-07-25 16:24:08 +02:00
08b56fe1a4
Fix compiler warning sketch/cardreader.cpp:706:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare].
...
Remove redundant and masked int d variable.
Fix indentation of presort() to make it clear, that it is not part of for loop.
2018-07-25 15:51:00 +02:00
5f8e87e649
Fix compiler warning: sketch/SdFatUtil.cpp:49:7: warning: unused variable 'i' [-Wunused-variable]
2018-07-25 15:19:10 +02:00
702fa307bb
Fix compiler warning sketch/Marlin_main.cpp:478:14: warning: 'delta' defined but not used [-Wunused-variable].
...
Variable was never used since "Initial commit".
2018-07-25 15:08:17 +02:00
904db96cd1
Fix compiler warning sketch/tmc2130.h:123:3: warning: 'tmc2130_axis_config' defined but not used [-Wunused-variable]
2018-07-25 15:03:38 +02:00
98ba79e518
Fix out of array bounds access.
...
Manifested as compiler warnings:
In file included from sketch/Marlin_main.cpp:67:0:
sketch/temperature.h: In function 'bool gcode_M45(bool, int8_t)':
sketch/temperature.h:142:30: warning: array subscript is above array bounds [-Warray-bounds]
target_temperature[extruder] = celsius;
^
sketch/temperature.h:142:30: warning: array subscript is above array bounds [-Warray-bounds]
target_temperature[extruder] = celsius;
^
sketch/temperature.h: In function 'void long_pause()':
sketch/temperature.h:142:30: warning: array subscript is above array bounds [-Warray-bounds]
target_temperature[extruder] = celsius;
^
sketch/temperature.h:142:30: warning: array subscript is above array bounds [-Warray-bounds]
target_temperature[extruder] = celsius;
^
sketch/temperature.h: In function 'void process_commands()':
sketch/temperature.h:142:30: warning: array subscript is above array bounds [-Warray-bounds]
target_temperature[extruder] = celsius;
^
sketch/temperature.h:142:30: warning: array subscript is above array bounds [-Warray-bounds]
target_temperature[extruder] = celsius;
^
2018-07-25 12:52:02 +02:00
e6dcbedf82
Fix compiler warning: sketch/Marlin_main.cpp:8833:16: warning: variable 'nplanner_blocks' set but not used [-Wunused-but-set-variable]
2018-07-25 11:58:48 +02:00
b357399c6b
Fix compiler warning sketch/Marlin_main.cpp:1846:1: warning: control reaches end of non-void function [-Wreturn-type].
2018-07-25 11:54:55 +02:00
d6021d047d
Merge pull request #969 from mkbel/fix_compiler_warnings
...
Fix compiler warning: sketch/ultralcd.cpp:7258:61: warning: integer o…
2018-07-25 11:36:34 +02:00
c7de8a91bb
Fix compiler warning sketch/Marlin_main.cpp:8811:10: warning: unused variable 'extruder_abs_pos' [-Wunused-variable]
...
Variable started to be unused in commit
fde0efc75c
2018-07-25 11:33:32 +02:00
0f577cace6
Fix compiler warning: sketch/Marlin_main.cpp:8759:8: warning: unused variable 'c' [-Wunused-variable]
2018-07-24 19:40:43 +02:00
bd868132cc
Fix compiler warnings:
...
sketch/Marlin_main.cpp:8756:8: warning: unused variable 'x_rec' [-Wunused-variable]
sketch/Marlin_main.cpp:8756:15: warning: unused variable 'y_rec' [-Wunused-variable]
sketch/Marlin_main.cpp:8756:22: warning: unused variable 'z_pos' [-Wunused-variable]
2018-07-24 19:31:18 +02:00
c19bf72ba9
Fix compiler warning sketch/Marlin_main.cpp:8220:15: warning: unused variable 'k' [-Wunused-variable].
2018-07-24 18:33:44 +02:00
3f0684ea30
Fix compiler warning - remove unused variable.
2018-07-24 18:27:05 +02:00
f7754faaf1
Fix compiler warning sketch/Marlin_main.cpp:7092:14: warning: variable 'make_move' set but not used [-Wunused-but-set-variable]
2018-07-24 18:06:38 +02:00
68a3ae5456
Fix compiler warning sketch/Marlin_main.cpp:6331:11: warning: unused variable 'cnt' [-Wunused-variable]
2018-07-24 17:57:26 +02:00
b44f71fd33
Fix compiler warning sketch/Marlin_main.cpp:6267:16: warning: variable 'TooLowZ' set but not used [-Wunused-but-set-variable]
...
int8_t TooLowZ = 0;
This variable was unused even in "Initial commit".
2018-07-24 17:30:37 +02:00
d5ab657cdf
Fix compiler warnings:
...
file included from sketch/Configuration_prusa.h:2:0,
from sketch/Configuration.h:43,
from sketch/Marlin.h:22,
from sketch/Marlin_main.cpp:46:
sketch/Marlin_main.cpp: In function 'void process_commands()':
sketch/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h:106:33: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
#define NORMAL_MAX_ACCEL_XY 2500ul // max acceleration in normal mode in mm/s^2
^
sketch/Marlin_main.cpp:5772:16: note: in expansion of macro 'NORMAL_MAX_ACCEL_XY'
if (val > NORMAL_MAX_ACCEL_XY)
^
sketch/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h:102:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
#define SILENT_MAX_ACCEL_XY 960ul // max acceleration in silent mode in mm/s^2
^
sketch/Marlin_main.cpp:5774:23: note: in expansion of macro 'SILENT_MAX_ACCEL_XY'
if (val_silent > SILENT_MAX_ACCEL_XY)
2018-07-24 17:22:29 +02:00
3a532a46bb
Fix compiler warning sketch/Marlin_main.cpp:5737:15: warning: unused variable 'area' [-Wunused-variable]
...
This variable was unused even in "Initial commit".
2018-07-24 17:17:44 +02:00
97ec55b951
Fix compiler warning sketch/Marlin_main.cpp:4307:7: warning: unused variable 'Z_PROBE_FEEDRATE' [-Wunused-variable].
...
This variable was unused even in "Initial commit".
2018-07-24 17:07:21 +02:00
PavelSindler
PavelSindler
Marek Bel
MRprusa3d
Robert Pelnar
MRprusa3d
mkbel
bubnikv