bbfc4b9f78
PFW-1504 initial commit
...
Change in memory:
Flash: +162 bytes
SRAM: 0 bytes
2023-03-13 06:47:08 +01:00
04d440a9c8
Fix AutoLoad filament menu not shown when FSensor is [Off] ( #4072 )
...
Fix AutoLoad filament menu not shown when FSensor if [Off]
2023-03-10 14:23:56 +01:00
ba41b2bb0b
Fix M706 lcd message stuck
2023-03-09 07:00:40 +01:00
e787111922
Add MMU error code: MCU_UNDERVOLTAGE_VCC ( #4069 )
...
+ read bandgap voltage periodically
+ correct wording of ERR_ELECTRICAL_MCU_UNDERVOLTAGE_VCC (as requested in Prusa-Error-Codes PR#81)
2023-03-08 15:42:25 +01:00
a20a7232a8
Change "Extruder N" to "Filament N"
...
Change in memory:
Flash: -52 bytes
SRAM: 0 bytes
2023-03-06 10:26:12 +01:00
03280c48d5
Merge pull request #4059 from gudnimg/planner-opt-subtraction
...
planner: calculate step difference once
2023-03-03 14:42:47 +01:00
474d489c39
Merge pull request #4033 from gudnimg/improve-preheat-target
...
preheat: improve target temperature threshold
2023-03-03 14:41:58 +01:00
bc818636b0
Increase MMU FW version to 2.1.8
...
in relation to MMU-218
2023-03-02 19:58:00 +01:00
d487254806
planner: calculate step difference once
...
Change in memory:
Flash:-158 bytes
SRAM: 0 bytes
2023-03-01 22:28:08 +00:00
051054b0db
Bump up FW version and build number
2023-02-24 16:42:36 +01:00
303a67cd6f
Introduce MMU EEPROM reset feature
...
This new feature requires MMU FW v 2.1.7 (which brings some more small changes)
2023-02-24 15:26:07 +01:00
31bfbb4ed0
Merge pull request #4023 from DRracer/rename-eject-mmu
...
PFW-1497 Change Eject filament -> Eject from MMU
2023-02-23 10:48:35 +01:00
afc866e756
Merge pull request #4010 from gudnimg/improve-backlight-control
...
backlight: always allow backlight to dim/wake
2023-02-21 10:00:03 +01:00
8a926fad10
backlight: set rotation flag when certain amount of pulses are detected
...
We don't want to trigger a backlight wakeup randomly, for example
due to background noise.
2023-02-20 18:26:43 +00:00
36c6b323c4
Set `Is filament loaded? Yes|No` default to `No` without a timeout.
2023-02-20 16:31:23 +01:00
791b9b4d39
Merge pull request #4028 from DRracer/pr3322-updated
...
Merge duplicate strings in cmdqueue.cpp
2023-02-20 13:51:09 +01:00
496b52b819
preheat: sync temperature threshold in M600 and Wizard
...
* M600 used 1°C threshold, which may increase the waiting time a bit
* Wizard used 3°C
Sync both to use TEMP_HYSTERESIS for consistancy
No change in memory footprint
2023-02-19 13:23:31 +00:00
6ad126ef0b
optimisation: preheat menu always uses integers for target temperature
...
Let's drop the float comparison since it not needed
Change in memory:
Flash : -16 bytes
SRAM: 0 bytes
2023-02-19 13:21:30 +00:00
319fec47f0
preheat: improve target temperature threshold
...
Use 5°C threshold to be consistant with other parts
of the firmware.
Relying on 95% of the target temperature creates
a dependency on the temperature:
PLA: Target = 215°C, threshold = 10.75°C
PETG: Target = 230°C, threshold = 11.5°C
ABS: Target = 255°C, threshold = 12.75°C
ASA: Target =260°C, threshold = 13.0°C
PC: Target = 275°C, threshold = 13.75°C
My proposal is we instead use a constant
TEMP_HYSTERESIS = 5, which is consistent with
M109, and behavior when restoring print from RAM
and some of the MMU code (like unload function)
Change in memory:
Flash: +2 bytes
SRAM: 0 bytes
2023-02-19 12:59:58 +00:00
db878c9996
backlight: always allow backlight to dim/wake
...
This commit adds the ability for the firmware to dim and wake the
backlight when LCD updates are disabled. Such as in the MMU error screen
or when rendering full screen messages which typically
disable the LCD updates to prevent the status screen from rendering.
Fixes #2777
Change in memory:
Flash: -26 bytes
SRAM: +1 byte
2023-02-18 17:08:35 +00:00
5cd60636f9
Add missing translations + shorten to 16 chars
2023-02-18 17:39:30 +01:00
98e7c15928
Change Eject filament -> Eject from MMU
...
PFW-1497
2023-02-18 17:39:30 +01:00
05662a5c0a
optimsation: reduce code size in LCD rendering
...
Change in memory (MK3S+ Multilang):
Flash: -62 bytes
SRAM: -6 bytes
2023-02-18 16:32:08 +01:00
074057c110
Fix an issue where LCD freezes during loading test
...
It may be useful to view the Sensors menu
while the toolchange loading test is taking
place. For example to see if the reading is flickering
The firmware needs to call lcd_update(0) to update the screen rendering.
Change in memory:
Flash: -2 bytes
SRAM: 0 bytes
2023-02-18 13:16:40 +01:00
555e766296
optimisation: only update mm when i > 0
...
Change in memory:
Flash: -24 bytes
SRAM: 0 bytes
2023-02-18 12:39:44 +01:00
e41b6d106d
optimisation: use more string from PROGMEM
...
Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
2023-02-18 12:39:44 +01:00
9f4a7adb9a
optimisation: extract common M861 code
...
Change in memory:
Flash: -128 bytes
SRAM: 0 bytes
2023-02-18 12:39:44 +01:00
ee23d6c62a
Merge duplicate strings in cmdqueue.cpp
...
Original idea from @GilesBathgate, PR #3322 . This is just a rework on top of current MK3 branch.
2023-02-18 11:37:48 +01:00
3381bf2f7e
Merge pull request #2201 from vintagepc/2091_2153_sheet_Mcode
...
Add M850 code for setting sheet label and offsets
2023-02-17 15:12:22 +01:00
1b3fa8bfe9
TM: Move headers to support the legacy build system
2023-02-17 15:01:59 +01:00
a8f219259a
TM: Split default model parameters into a separate header
...
Preparation to support multiple default model parameter sets
2023-02-17 15:01:59 +01:00
d1ff728e4f
TM: future-proofing for incompatible model upgrades
...
Introduce a model version. This is initialized at "1" and doesn't
require any upgrade/downgrade checks since it's currently
retro-compatible.
2023-02-17 15:01:59 +01:00
9bd03cedb9
TM: Fix UV identity
2023-02-17 15:01:59 +01:00
ddf5147f9f
TM: Optimize temp_model_set_lag
...
Save about 20 bytes by rewriting the sample count check
2023-02-17 15:01:59 +01:00
b676d395e3
TM: Handle L/TEMP_MODEL_LAG
2023-02-17 15:01:59 +01:00
0bf6a5bc4b
TM: Handle UV (PTC loss)
...
Model UV as power-invariant, so that scaling P doesn't change the
intercept location (that is, the zero point remains at the same
temperature even for more powerful heaters).
NOTE: It's not clear to me whether this is generally true (couldn't
find a datasheet from the same heater in diffent power variants
showing the efficiency loss)
2023-02-17 15:01:59 +01:00
ba96c8d457
TM: Handle D/TEMP_MODEL_fS
2023-02-17 15:01:59 +01:00
eb88b720ac
TM: Handle UVDL set/load/report/upgrade
...
- Expose TEMP_MODEL_fS and TEMP_MODEL_LAG as D and L respectively,
initializing the default values based on the previous hard-coded
values.
- Always round L to the effective sample lag to future-proof model
upgrades or changes (the stored value _is_ the effective value).
- Introduce UV as a new linear term for PTC heaters, defaulting
to an identity for model backward-compatibility.
2023-02-17 15:01:59 +01:00
38b1e64687
TM: Allocate new eeprom parameters for PTC handling
2023-02-17 15:01:59 +01:00
235ce62cd3
Update Marlin_main.cpp
...
Remove more stale code
2023-02-17 08:58:17 -05:00
032d5ebe5b
Update Marlin_main.cpp
...
Fix use of removed function
2023-02-17 08:31:27 -05:00
d0e0b51497
Optimisation: lcd_commands "M702 C" should be "M702"
...
Change in memory:
Flash: -2 bytes
SRAM: 0 bytes
2023-02-17 14:30:20 +01:00
952b1af60b
Consistent use of noinline attribute
2023-02-17 14:30:20 +01:00
754b2d03c3
Remove extraneous line added during merge conflict resolution
2023-02-17 14:30:20 +01:00
25f9728e09
Add noinline attribute to count_e
2023-02-17 14:30:20 +01:00
620b19bbab
Roll up lay1cal_square loops
2023-02-17 14:30:20 +01:00
f92d2279d5
Re-use duplicated strings
2023-02-17 14:30:20 +01:00
8129a14f19
Move layer calibration finish commands into first_layer_cal.cpp
2023-02-17 14:30:20 +01:00
39160bc4ae
Free up some progmem
2023-02-17 14:30:20 +01:00
568eec5ee0
Implement first layer cal with calculated extrusion widths
2023-02-17 14:30:20 +01:00
Guðni Már Gilbert
3d-gussner
DRracer
D.R.racer
Yuri D'Elia
vintagepc
Giles Bathgate