b47a29b388
New ML support - fixed invalid characters, added some cz translations
2018-05-29 15:56:00 +02:00
b3f4e1f6e4
New ML support - language menu
2018-05-28 19:41:16 +02:00
baa66a0887
New ML support - secondary language name, language selection
2018-05-28 17:14:55 +02:00
3bf2552b6c
fixed #761 from hzapper (#elif instead of #else if)
2018-05-28 13:41:36 +02:00
28a767b460
Merge pull request #760 from PavelSindler/safety_timer_fixes
...
Safety timer not active during filament runout procedure
2018-05-28 13:28:24 +02:00
58ae70c4e1
Merge branch 'MK3' into MK3-new_lang
2018-05-28 13:22:14 +02:00
15207e4d5e
Linearity correction fix - (eeprom storage changed to byte instead of word)
...
+enabled for XYZ axes
2018-05-28 01:47:08 +02:00
def9ab56f6
New ML support - language.c - fixed return origial string for zero length translation
2018-05-27 16:24:21 +02:00
55157640c5
New ML support - czech version is working!!!
...
postbuild.sh, make_lang.sh - fixed (id and offset calculation)
language.c, language.h - fixed (==||==)
config.h - reserved space for _SEC_LANG changed
Marlin_main.cpp - debug output + hardcoded lang_select(1) //means cz
2018-05-27 15:14:04 +02:00
64f7272ea7
M27: returns print saved (fixes setting temperatures to zero during crash detection)
2018-05-24 18:49:35 +02:00
2cf20c8c99
New ML support - migration - fix_source_1.sh script (replace 'MSG_xx' with '_T(MSG_xx)')
...
+ output + fixed source
2018-05-23 16:37:08 +02:00
da3432e237
New ML support - changed _SEC_LANG reserved space to 10kb, added debug code
2018-05-23 16:11:12 +02:00
f00a9ce636
New ML support - language.c, language.h - code fixed, Marlin_main.cpp - debug output
2018-05-23 15:46:08 +02:00
d979c3dffc
New ML support - messages.c - some strings fixed
2018-05-23 14:18:37 +02:00
0091b41fb5
Merge pull request #744 from PavelSindler/M860_fix
...
M860 fix: send busy messages
2018-05-23 13:15:46 +02:00
7e3f675469
New ML support - migration - fixed some messages
...
all variants verified according to lang_en.txt (release only)
config.h updated (enabled ML support)
2018-05-22 20:30:55 +02:00
8c9b670c76
Merge pull request #746 from MRprusa3d/MK3
...
menu returns corrections
2018-05-22 16:08:08 +02:00
137e1c5027
whitespace
2018-05-22 13:33:31 +02:00
d63a17c696
Safety timer not active during filament runout detection
2018-05-22 13:31:21 +02:00
bd587faab9
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 03:20:03 +02:00
8573b65b05
_MIN_ENDSTOP_INVERTING redefinition in variant files (constant -> define)
2018-05-21 23:28:28 +02:00
a184d2b824
Merge pull request #756 from XPila/MK3-new_lang
...
Mk3 new lang
2018-05-20 13:26:28 +02:00
a528f8837c
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
2018-05-20 13:24:52 +02:00
5b015907aa
New localization - macro declarations fixed
2018-05-20 13:15:46 +02:00
9b7eeaecaa
version changed
2018-05-18 14:42:35 +02:00
503d5551e6
Fix build of MK2. Global variable distance_from_min was removed, do not update it.
...
Expression
float y = vec_x[1] * pgm_read_float(bed_ref_points_4+mesh_point*2) + vec_y[1] * pgm_read_float(bed_ref_points_4+mesh_point*2+1) + cntr[1];
is identical with expression in count_xyz_details().
2018-05-16 18:40:36 +02:00
3eb21b65ed
wizard fix: don't reset calibration status when repeating first layer cal.
2018-05-15 23:19:23 +02:00
83aa710da6
menu returns corrections
...
Settings::FilamentSensor & FilamentAutoload
removing Calibration::ShowEndStops @ MK3
2018-05-15 20:23:22 +02:00
c59e9bd6be
M860 fix: send busy messages
2018-05-15 18:27:25 +02:00
553779a65d
Merge pull request #723 from mkbel/refactor_bed_geometry
...
Refactor bed geometry
2018-05-14 17:18:03 +02:00
e8730c2899
Merge branch 'MK3' into read_xyz_cal
...
# Conflicts:
# Firmware/ultralcd.cpp
2018-05-10 18:31:31 +02:00
329ea199ec
Show measured bed offset from expected position even if not homed. Remove redundant lcd_quick_feedback() calls.
2018-05-10 18:24:49 +02:00
dd89226537
Merge pull request #722 from MRprusa3d/MK3
...
build instructions update
2018-05-10 14:44:55 +02:00
2bfc7475a8
version changed
2018-05-09 18:58:24 +02:00
2a5a7ab9d2
Add bed calibration points macro definitions to MK25 variants.
...
Homing and full print area printing tested on MK25.
2018-05-09 17:09:57 +02:00
59f3f9d8ec
New localization - includes fixed
2018-05-09 16:55:41 +02:00
80efafd7b9
menu returns corrections
...
Statistics
Calibration::ShowEndStops
Support::ExtruderInfo
Support::BeltStatus
Support::Temperatures
Support::Voltages
2018-05-09 00:27:32 +02:00
f00bde09a4
Re-factor bed calibration point coordinates to match bed CAD data. Tested successfully on MK3 (auto home position not calibrated and calibrated printer and print area position of calibrated printer). MK25 not tested.
2018-05-08 21:54:11 +02:00
737cb9608c
Merge pull request #716 from mkbel/calibrate_Z_via_live_adjust
...
Set calibration status to calibrated also by using live adjust Z.
2018-05-04 16:40:34 +02:00
c359d11858
Do not disable bed heating, when the print is paused.
...
Also remove duplicate handleSafetyTimer() call.
2018-05-04 15:21:22 +02:00
1d7b3ea2de
Set calibration status to calibrated also by using live adjust Z.
...
This fixes problem, that if the first layer calibration is never done, live adjusting Z during printing is not applied after printer reset. Also repeatedly using live adjust Z on uncalibrated printer leads to steadily decreasing meaningless stored live adjust Z value.
2018-05-03 22:03:38 +02:00
777beac66a
Merge pull request #713 from PavelSindler/fan_error_fix
...
fan error synchronization with planner
2018-05-03 16:01:00 +02:00
cd3851e175
Merge pull request #715 from MRprusa3d/MK3
...
Mk3
2018-05-03 14:54:43 +02:00
8a92d9b6a3
MaR::180501b
2018-05-02 23:49:21 +02:00
d02333918f
MaR::180501
2018-05-02 22:13:47 +02:00
72364648dd
Hot fix: Can not move X and Y axis in stealth mode, when the printer is not homed.
...
Disable endstops in move axis menu.
2018-05-02 20:50:47 +02:00
d86d1beeaa
fan error synchronization with planner
2018-05-02 16:16:48 +02:00
3d595cc523
Merge pull request #712 from XPila/MK3-V3_2
...
Mk3 v3 2
2018-05-02 13:43:07 +02:00
964d019dd1
MK3 - extruder current = 30
2018-05-02 13:42:05 +02:00
420d1079af
terminate temperature calibration in case that Z probing function returns false
2018-04-30 17:51:44 +02:00
Robert Pelnar
PavelSindler
PavelSindler
Marek Bel
MRprusa3d