bf2097342d
Add ASA preheat into mFilamentMenu();
2019-08-27 17:01:41 +02:00
6aaa40b9a3
Merge pull request #2134 from mkbel/fix_power_panic
...
Fix repeated power panic restarted print from beginning or jumped at …
2019-08-27 08:13:26 +02:00
a1e68c3d7f
Merge pull request #2135 from prusa3d/MK3_3.8.0
...
Increase version to 3.8.0-RC2 and build number to 2639.
2019-08-27 08:12:27 +02:00
159a1a70d8
Update documentation.
2019-08-26 17:19:57 +02:00
c27fcf9cff
Increase version to 3.8.0-RC2 and build number to 2639.
2019-08-26 17:03:18 +02:00
52cb37770b
Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card.
...
As sdpos_atomic was not updated after printer power up and first power panic recovery, it was equal 0. When the first command from SD card was queued its size on SD card was computed as current SD index position minus sdpos_atomic. This was equal to offset from beginning of the file limited to 16 bit storage type. When next power outage occurred earlier then this command was finished and wiped out of queue, this command size (extraordinarily big) was subtracted from sdpos_atomic and saved to EEPROM. This led to up to 65536 B jump back in file printed after next power panic recovery.
2019-08-23 19:30:20 +02:00
3eb36ca194
Fix cmdqueue_dump_to_serial.
...
Header was historically made bigger to contain size of the command on SD card, but those debug functions wasn't updated.
2019-08-23 16:48:30 +02:00
5bb510dd2a
Merge pull request #2129 from DRracer/bed-noise-performance
...
Improve performance of bed PWM automaton
2019-08-22 14:45:01 +02:00
c6df3fe012
Merge pull request #2127 from DRracer/code-size-reduction-1
...
Code size reduced by almost 5KB
2019-08-22 14:25:23 +02:00
a7c2aec04c
Code size reduced by almost 5KB
2019-08-21 09:59:51 +02:00
3ed6d0637c
Re-enable tmc2130_sg_stop_on_crash only if crash detection enabled from menu.
...
This fixes bug, that disabling crash detection from menu doesn't work during recovery from crash detection.
2019-08-20 19:32:39 +02:00
f204cdea81
Refactor
...
Remove variable CrashDetectMenu. Read this state from EEPROM_CRASH_DET instead in bool lcd_crash_detect_enabled().
Rename crashdet_enable() to lcd_crash_detect_enable() and move it to ultralcd.cpp.
Rename crashdet_disable() to lcd_crash_detect_disable() and move it to ultralcd.cpp.
Rename lcd_crash_mode_set() to crash_mode_switch().
Remove forward function declarations from *.cpp file.
Saves 34B of FLASH and 2B of RAM.
2019-08-20 17:22:27 +02:00
f07635d08a
Merge pull request #2116 from mkbel/fix_mmu_lay1cal
...
Fix mmu lay1cal
2019-08-19 19:07:10 +02:00
f0642f88f1
Fix power panic broken when PSU_Delta defined.
...
Remove disable_z() call from uvlo_() and uvlo_tiny() power panic interrupt handlers. As historically this function was empty. And in case PSU_Delta macro defined it switches Z trinamic to silent mode, which could take some time and is not needed. Remove alignment to to full step from disable_force_z(), as it is not needed when switching to silent mode.
2019-08-19 17:37:23 +02:00
170c1ea866
Split first layer calibration load filament and intro line into separate steps. If load fails, pause print apparently flushes command buffer and intro line is not printed after issue is resolved.
2019-08-16 20:47:55 +02:00
e53734895f
Make MMU load failed blocking to workaround lack of resume print menu item.
...
The same workaround used as for USB print (Octoprint).
2019-08-16 20:20:17 +02:00
1036c4f755
Do not precede first layer calibration without filament if print is paused due to MMU load failed.
2019-08-16 19:00:45 +02:00
b10bd8340a
Make local functions static.
2019-08-15 17:57:30 +02:00
0b798767af
Fix preheat ASA.
2019-08-15 17:54:23 +02:00
a6f955b62d
Use unused macros *_PREHEAT_FAN_SPEED.
2019-08-15 17:47:34 +02:00
eb68bb9b43
Add ASA preheat.
2019-08-15 17:46:29 +02:00
36a69281ee
Remove unused functions forward declarations.
2019-08-15 17:36:05 +02:00
0e4e644476
Merge branch 'MK3' into MK3_3.8.0
2019-08-15 10:34:50 +02:00
ba81149afe
Merge branch 'MK3' into MK3_3.7.3
2019-08-15 10:25:51 +02:00
dc78bc7362
Improve performance of bed PWM automaton - proof of concept
...
There are still some artefacts on the output pin - work in progress.
2019-08-14 17:53:08 +02:00
2ddbd606f2
Version changed (3.8.0 build 2608)
2019-08-08 16:44:16 +02:00
84cf1b83c3
Merge pull request #2083 from DRracer/viper
...
Workaround for the "viper" situation bug.
2019-08-07 17:48:57 +02:00
a28c365bb1
Merge pull request #2075 from MRprusa3d/PFW-873b
...
farm mode update, documentation correction
2019-08-07 17:48:30 +02:00
d9dec38815
Workaround for the "viper" situation bug.
2019-08-07 17:23:19 +02:00
7da2ee5fc3
Version changed (3.7.3 build 2370)
2019-08-06 15:37:23 +02:00
b471bb7540
farm mode update, documentation correction
2019-08-05 17:51:26 +02:00
5cb86a7e8f
Merge pull request #2074 from kuhnmarek/MK3_PFW-967_filament_sensor_check
...
Fw version check disabled in farm mode
2019-08-05 17:41:16 +02:00
091cd49ca5
Fw version check disabled in farm mode
2019-08-05 16:59:09 +02:00
9f8590c572
Merge pull request #2072 from kuhnmarek/MK3_PFW-961_blind_sound
...
changed blind sound
2019-08-05 12:47:31 +02:00
f77414be2b
blind alert sound shorter
2019-08-05 12:41:27 +02:00
f1a947af2c
Whole hw settings hidden in farm mode
2019-08-05 10:40:21 +02:00
cb19f0958b
Use _delay() and _micros() for future compatibility
2019-08-05 09:51:06 +02:00
5f14e9c2e5
Removed sheet setting when in farm mode
2019-08-03 17:35:39 +02:00
15a095ea76
changed blind sound
2019-08-03 15:37:11 +02:00
7c9d3dd177
Update doxydoc of new G-codes
2019-08-01 13:09:20 +02:00
9214e30f74
Merge pull request #2062 from MRprusa3d/PFW-873
...
UI update
2019-08-01 07:20:09 +02:00
2cb977e4a0
UI update
2019-07-31 20:39:57 +02:00
e43e89421c
Merge pull request #2056 from BoCoKeith/patch-1
...
Correct bug in util.cpp is_whitespace_or_nl function.
2019-07-31 17:00:49 +02:00
bca0fd81eb
Fix loading filament 255 instead of 0 in first layer calibration wizard.
2019-07-30 19:15:33 +02:00
0aed59c947
Fix unsigned char overflow cause invalid filament load.
2019-07-30 19:06:57 +02:00
952a24b45d
Update util.cpp
...
Correct "is_whitespace_or_nl": change 'r' to '\r'.
2019-07-28 19:40:18 -06:00
3ddb853bbd
Fix shifted languages. Use \n and \x0a
2019-07-26 18:53:08 +03:00
0687b8e4a2
Merge pull request #2044 from mkbel/fix_missing_mmu_attention
...
Fix missing mmu attention
2019-07-26 09:07:06 +02:00
3b396fb8bf
Merge branch 'MK3' into fix_missing_mmu_attention
2019-07-25 19:10:07 +02:00
a9e9a9857b
Fix "MMU needs attention screen is missing in case of failed unload filament".
2019-07-25 19:09:52 +02:00
Marek Bel
DRracer
XPila
MRprusa3d
Marek Kühn
Keith Spitz
leptun