aacaf67eaa
Crash detection/filament sensor: restore print from stored line number in case that we are printing over USB, retraction fix; debug: cmd queue on LCD
2018-06-05 20:28:41 +02:00
01af8a806b
Merge branch 'MK3' into Use_Timer
2018-06-05 19:03:11 +02:00
f819392d10
Do not create static object in function. Saves 8B RAM and 16B flash, because there is no need to guard constructor against concurrent calls.
2018-06-05 18:38:25 +02:00
7cc8b743c2
Add .gitignore. Setup doxyfile. Create project documentation main page. Document property of static object constructors on gcc-avr.
2018-06-05 18:30:02 +02:00
746ac17e4e
debugging
2018-06-04 16:40:56 +02:00
47c68c884c
New ML support - fixed duplicate strings
2018-06-01 14:35:03 +02:00
53d9d8bd8a
New ML support - lang codes
...
+script tunning
2018-06-01 10:47:47 +02:00
5004433b20
Fix warning: This is kind of important
...
Again another fix from https://github.com/prusa3d/Prusa-Firmware/pull/138 made by @Thess for the MK2 branch which i think is quite important.
Ardunio IDE 1.8.5 result with Compiler warnings set to "More" or "All"
```
sketch\Marlin_main.cpp:3265:44: warning: the address of 'retracted' will always evaluate as 'true' [-Waddress]
if((echange<-MIN_RETRACT && !retracted) || (echange>MIN_RETRACT && retracted)) { //move appears to be an attempt to retract or recover
^
sketch\Marlin_main.cpp:3265:82: warning: the address of 'retracted' will always evaluate as 'true' [-Waddress]
if((echange<-MIN_RETRACT && !retracted) || (echange>MIN_RETRACT && retracted)) { //move appears to be an attempt to retract or recover
^
sketch\Marlin_main.cpp:3268:28: warning: the address of 'retracted' will always evaluate as 'true' [-Waddress]
retract(!retracted);
^
sketch\Marlin_main.cpp:3870:15: warning: statement has no effect [-Wunused-value]
```
I don't know if that helps making small pull requests as they are easier to review or it would make sense to combine few more.
Prusa should really review this pull [request](https://github.com/prusa3d/Prusa-Firmware/pull/138 ) again for the MK3 branch, as it was one that made warnings disapear in the MK2 branch and made finding new flaws in the code much much easier.
2018-06-01 10:17:03 +02:00
5a2b056d47
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
2018-06-01 00:43:16 +02:00
7c4fce7876
whitespace correction
2018-05-31 18:55:14 +02:00
73708ec883
Improved M860 - now wait for cooling of PINDA, too
...
The M860 - wait for PINDA temperature - gcode has been improved. Until now it could only wait until the PINDA has been warmed up to a set temperature. Now it also can wait until the PINDA has cooled down to a set temperature. The calling syntax has not been changed at all. The logic now looks if the bed or hotend have a target temperature different from 0. If so, the code waits until PINDA has warmed up. Otherwise it waits until PINDA has cooled down.
Applications:
- Possibility to start a Print at exactly the right PINDA temperature. (Do not start the heater until PINDA is cooled down)
- Much easier manual temperature calibration (automating the wait for cool down in between calibration runs)
- Possibility for temp calibration verification on one heat bed by printing multiple objects with different PINDA temperatures one after the other
2018-05-31 16:41:59 +02:00
80c641ae5d
Merge pull request #789 from 3d-gussner/MK3_fix4
...
Fixed warning: invalid suffix on literal; C++11 requires a space betw…
2018-05-31 14:09:49 +02:00
37e575f4bc
New ML support - debug output, bootloader
...
bootapp - automaticaly erase flash when necessary
+test code
2018-05-30 19:29:52 +02:00
9104b0601a
power panic: extruder_multipliers added
2018-05-30 18:59:33 +02:00
eeca0f683b
Fixed warning: invalid suffix on literal; C++11 requires a space between literal and identifier [-Wliteral-suffix]
2018-05-30 16:06:22 +02:00
3bf47d7f83
"run xyz cal first" message
2018-05-30 15:29:59 +02:00
987f8969c0
Merge remote-tracking branch 'upstream/MK3' into temp_cal_coordinates_fix
2018-05-30 15:20:40 +02:00
2561ab9c7d
Merge pull request #786 from XPila/MK3-new_lang
...
Mk3 new lang
2018-05-30 14:54:47 +02:00
dce2d45499
Fixed forgotten comment
2018-05-30 13:35:48 +02:00
4746c77195
New ML support - bootloader support and update proces test
2018-05-29 21:03:47 +02:00
d307868a90
merge with upstream
2018-05-28 20:38:55 +02:00
26724c4a48
removed message
2018-05-28 20:31:57 +02:00
7e79ce8e53
MK3: crash detection for Z axis is active during auto home and mesh bed leveling (normal mode is forced for Z movents); temp cal coordintes corrections; temp cal: xy movents always in safe Z distance from heatbed, Z-axis homing improved
2018-05-28 20:26:15 +02:00
baa66a0887
New ML support - secondary language name, language selection
2018-05-28 17:14:55 +02:00
28a767b460
Merge pull request #760 from PavelSindler/safety_timer_fixes
...
Safety timer not active during filament runout procedure
2018-05-28 13:28:24 +02:00
58ae70c4e1
Merge branch 'MK3' into MK3-new_lang
2018-05-28 13:22:14 +02:00
15207e4d5e
Linearity correction fix - (eeprom storage changed to byte instead of word)
...
+enabled for XYZ axes
2018-05-28 01:47:08 +02:00
55157640c5
New ML support - czech version is working!!!
...
postbuild.sh, make_lang.sh - fixed (id and offset calculation)
language.c, language.h - fixed (==||==)
config.h - reserved space for _SEC_LANG changed
Marlin_main.cpp - debug output + hardcoded lang_select(1) //means cz
2018-05-27 15:14:04 +02:00
2ffb95c72a
bugfix: use absolute coordinates for steel sheet removal position, because there is no homing at the beginning of calibration in case that position is already known
2018-05-24 20:28:00 +02:00
2cf20c8c99
New ML support - migration - fix_source_1.sh script (replace 'MSG_xx' with '_T(MSG_xx)')
...
+ output + fixed source
2018-05-23 16:37:08 +02:00
da3432e237
New ML support - changed _SEC_LANG reserved space to 10kb, added debug code
2018-05-23 16:11:12 +02:00
f00a9ce636
New ML support - language.c, language.h - code fixed, Marlin_main.cpp - debug output
2018-05-23 15:46:08 +02:00
0091b41fb5
Merge pull request #744 from PavelSindler/M860_fix
...
M860 fix: send busy messages
2018-05-23 13:15:46 +02:00
137e1c5027
whitespace
2018-05-22 13:33:31 +02:00
d63a17c696
Safety timer not active during filament runout detection
2018-05-22 13:31:21 +02:00
bd587faab9
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 03:20:03 +02:00
83aa710da6
menu returns corrections
...
Settings::FilamentSensor & FilamentAutoload
removing Calibration::ShowEndStops @ MK3
2018-05-15 20:23:22 +02:00
c59e9bd6be
M860 fix: send busy messages
2018-05-15 18:27:25 +02:00
02ecd08786
Convert Time class to template, instantiate LongTimer for longer and ShortTimer for shorter periods.
2018-05-11 16:31:42 +02:00
e8730c2899
Merge branch 'MK3' into read_xyz_cal
...
# Conflicts:
# Firmware/ultralcd.cpp
2018-05-10 18:31:31 +02:00
c359d11858
Do not disable bed heating, when the print is paused.
...
Also remove duplicate handleSafetyTimer() call.
2018-05-04 15:21:22 +02:00
8a92d9b6a3
MaR::180501b
2018-05-02 23:49:21 +02:00
d02333918f
MaR::180501
2018-05-02 22:13:47 +02:00
420d1079af
terminate temperature calibration in case that Z probing function returns false
2018-04-30 17:51:44 +02:00
2a57325bd5
Merge pull request #685 from mkbel/add_safety_timer_notice
...
Show full screen blocking notification message after heater turned off
2018-04-27 17:24:33 +02:00
265d4761a3
M861: steps value for 35C
2018-04-27 17:07:10 +02:00
eced66f0f6
Show full screen blocking notification message after heater turning off by safety timer.
2018-04-27 16:23:20 +02:00
acd308e3d4
safety timer prolonged to 30 minutes
2018-04-27 14:03:09 +02:00
e7cf68e038
whitespace
2018-04-26 19:27:07 +02:00
2dd0d84845
M861: usteps and z_shift variables correction
2018-04-26 19:14:28 +02:00
9c3e0aab36
M861 update: use signed values
2018-04-26 18:55:08 +02:00
ae08788c99
Split lcd_service_mode_show_result screens to separate functions. Make them non blocking. Remove global array distance_from_min, pass it as function return value. Make Support submenus returning to Support menu.
2018-04-26 16:36:02 +02:00
2657d3febd
MK25: SILENT_MODE_NORMAL changed to SILENT_MODE_POWER
2018-04-26 15:12:45 +02:00
9a6cc8a035
Merge pull request #664 from MRprusa3d/MK3
...
Mk3
2018-04-25 22:20:45 +02:00
7e462b3224
Merge branch 'MK3' into MK3
2018-04-25 19:15:36 +00:00
0b6644915a
Add files via upload
2018-04-25 18:47:19 +00:00
d85a8077a8
M115 update
2018-04-25 20:39:10 +02:00
0271ab3643
Meshbedleveling, calibration Z
...
check crash Z (MK3)
check deviation of Z-probe (>50um == error, all printers)
kill with message "debris on nozzle..."
2018-04-25 16:19:16 +02:00
5bb9451b5d
Merge pull request #658 from XPila/MK3-V3_2
...
Meshbedleveling/MK3 - check crash Z after homeaxis (kill with message…
2018-04-24 20:54:53 +02:00
1553e99d8e
Meshbedleveling/MK3 - check crash Z after homeaxis (kill with message "debris on nozzle...")
2018-04-24 20:12:29 +02:00
f9d64bdfb1
Merge pull request #655 from mkbel/fix_z_home_point
...
Fix z home point
2018-04-24 16:51:57 +02:00
79b9f736aa
Merge pull request #657 from PavelSindler/temp_cal_update
...
Temp calibration update
2018-04-24 15:16:13 +02:00
8efe66ef99
remove tab
2018-04-24 14:34:49 +02:00
ffe93b2ca9
whitespace correction
2018-04-24 14:33:48 +02:00
cc74edfa13
whitespace
2018-04-24 14:23:52 +02:00
010ceceff9
add another homing after steel sheet is removed; added timeout for pinda cooling; if PINDA doesn't trigger before reaching Z = -1mm, temp. calibration fails
2018-04-24 13:43:51 +02:00
9bd4d580d7
Use right calibration point. This change is only formal, as both original and new point have same coordinates.
2018-04-23 20:33:25 +02:00
cccd8246ab
Fix world2machine(const float &x, const float &y, float &out_x, float &out_y) not using input parameters if only WORLD2MACHINE_CORRECTION_SHIFT is applied.
2018-04-23 20:33:14 +02:00
043c8c66be
waiting for pinda probe cooling
2018-04-19 16:55:00 +02:00
5791d9f0d8
EEPROM address conflict fix; forcing selftest can happen only in case that we have TMC2130 drivers
2018-04-18 14:17:28 +02:00
c88f0108af
Fix safety timer.
...
Constant parameter greater than 16 bits must by stated as unsigned long.
2018-04-13 19:30:08 +02:00
b1bb6841c9
Merge pull request #617 from mkbel/fix_farm_reset_1
...
Fix farm reset
2018-04-13 10:02:54 +02:00
388d6eea36
Fix printer resets in farm mode if command "PRUSA SN" is received and 32U2 processor is not responding.
2018-04-12 18:44:33 +02:00
08740356b8
Move "PRUSA SN" gcode to separate function.
2018-04-12 18:41:11 +02:00
6b5835fd9f
Merge pull request #612 from PavelSindler/M861_gcode
...
M861 gcode, temp cal is automaticly activated after calibration process
2018-04-11 18:45:57 +02:00
45d1dbbfe0
temp cal. active set to false
2018-04-11 18:37:07 +02:00
ce66699340
dont use default temp table for new printers and dont automaticly activate temp. cal. (new pinda probes have different characteristics)
2018-04-11 18:36:38 +02:00
47eab97d2d
temp. calibration is automaticly activated after calibration process
2018-04-11 18:16:16 +02:00
0ba7850146
pinda temp table changed back
2018-04-11 17:40:04 +02:00
c69524c3fb
Merge pull request #611 from XPila/MK3-V3_2
...
removed Configuration_prusa.h
2018-04-11 17:33:37 +02:00
89efcb84b1
removed Configuration_prusa.h
...
fixed - compilation for MK25
2018-04-11 17:32:31 +02:00
919fba531a
wait for PINDA gcode changed
2018-04-11 16:48:47 +02:00
f70685a92d
Merge pull request #542 from stahlfabrik/MK3_PINDA_TEMP_WAIT_GCODE
...
MK3 Add Gcode to wait for minimum PINDA temp
2018-04-11 16:40:21 +02:00
92997204a1
Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20
2018-04-03 12:30:35 +02:00
baade7db61
Removed unused files (ST7565R-dogm, digipot)
...
renamed functions digipot_init and digipot_current
fixed cond. trans. (menus)
fixed variant files - MK25, MK3
2018-03-29 23:01:13 +02:00
363a9d24b3
LiquidCrystal class renamed to LiquidCrystal_Prusa
2018-03-29 17:50:43 +02:00
186e630299
New SPI (do not use Arduino SPI class)
...
saved ~300bytes flash, 4bytes ram
2018-03-29 17:42:41 +02:00
06d5ec5659
Merge pull request #586 from mkbel/ustep_linearity_2
...
Ustep linearity
2018-03-28 19:38:34 +02:00
ffdd11e960
Merge pull request #587 from XPila/MK3-V3_2
...
Mk3 v3 2
2018-03-28 19:38:20 +02:00
bde097cad1
bugfix - PFW233 - first homing in silent mode Y crash.
2018-03-28 19:22:20 +02:00
9cb036fbcb
Merge remote-tracking branch 'prusa3d/MK3' into ustep_linearity_2
2018-03-28 19:11:02 +02:00
40a064ffbc
Add extruder linearity correction to settings menu.
2018-03-28 18:53:37 +02:00
678cd17e7b
Increase size of EEPROM_TMC2130_WAVE_*_FAC to 16 bits.
2018-03-28 16:13:16 +02:00
cf43b85de9
XYZ calibration - accuracy improvement
2018-03-27 17:27:41 +02:00
e5faba7226
serial port set back (was previously changed for debugging purposes)
2018-03-15 14:42:03 +01:00
08ec920d33
merge with upstream
2018-03-15 14:25:17 +01:00
67e90b576a
Disabled force selftest
...
XYZ calibration tunning
2018-03-14 16:25:32 +01:00
863fe1f054
show message that printer is not connected to monitoring on printer start
2018-03-14 15:35:39 +01:00
81cd96b8fe
Variant file for MK25 + cond. translation
2018-03-13 23:02:46 +01:00
ac1a56b493
Merge branch 'MK25' into MK3
2018-03-13 20:43:19 +01:00
f45f206faf
sorting files disabled in farm mode, start printer status needs reponse from monitoring
2018-03-13 18:50:11 +01:00
ddeb7b8c84
statistics improved, initial version of function which forces user to connect printer to monitoring
2018-03-13 18:43:42 +01:00
16f9f35451
static_assert replaced with error directive
2018-03-13 16:47:38 +01:00
0c97f46f25
Merge pull request #551 from XPila/MK3-new_xyz_cal
...
New XYZ calibration with image processing
2018-03-13 16:17:50 +01:00
65a91b366d
New XYZ calibration with image processing
2018-03-13 12:55:35 +01:00
6b08cdeaf1
Safety timer (disable heaters after 15min idle)
2018-03-12 23:45:10 +01:00
262e800db7
Safety timer (disable heaters after 15min idle)
2018-03-12 23:35:50 +01:00
1df91e5656
MK3 Add Gcode to wait for minimum PINDA temp
...
The PINDA temperature compensation is defined for values above 35C. To achieve an optimal first layer consistently it is vital to start the print with a temperature of >= 35C on the pinda probe.
When doing a manual pinda temperature calibration it is necessary to begin homing and mesh bed leveling at an exact temperature. This gcode is perfect for this.
Example startup code:
G28 W ; home all without mesh bed level
G0 Z50 ; raise Z to not heat PINDA before bed is warm
M104 S215 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S215 ; wait for extruder temp
G0 X50 Y50 Z0.15 ; this is a good PINDA heating position
M666 S35 ; the new code - wait until PINDA is >= 35C
G28 W ; home all without mesh bed level
G80 ; mesh bed leveling
See my forum post later for more explaination on my manual temperature calibration procedure. I will link it then.
2018-03-09 20:46:07 +01:00
976e5a6a19
Temperature calibration - remove steel
2018-03-07 21:45:55 +01:00
e3967e444b
SafetyTimer disabled
...
Watchdog disabled
watchdog.cpp and watchdog.h source code removed (using directly <avr/wdt.h>)
2018-03-07 14:13:34 +01:00
55065cf124
Merge pull request #530 from PavelSindler/temp_cal_fix
...
steps per unit changed to 0.95%; changed temp cal. warnings, changed …
2018-03-06 18:26:37 +01:00
27659ae69e
steps per unit changed to 0.95%; changed temp cal. warnings, changed pin for PINDA probe
2018-03-06 16:48:39 +01:00
a6f900fd3c
Merge remote-tracking branch 'upstream/MK25' into MK25
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2018-03-06 15:11:50 +01:00
2b7e50e45b
Fix of calculate_extrusion_multipliers().
...
This is a fix of a bug made in the previous commit.
2018-03-06 13:03:38 +01:00
67fd467ebe
Add fail statistics menu item for MK25.
...
As there is only filament sensor and no crash and power interruption detection, squash everything into single screen.
2018-03-05 21:42:04 +01:00
fc3af0533a
Fix of calculate_extrusion_multipliers().
...
This is a fix of a bug made in the previous commit.
2018-03-05 21:31:31 +01:00
0f082fa1f7
Merge pull request #518 from PavelSindler/auto_power_2
...
Auto power mode for MK25
2018-03-05 11:42:00 +01:00
917689b5ce
tune menu
2018-03-05 01:23:18 +01:00
1033bd3cf9
info on serial not used
2018-03-05 00:48:10 +01:00
ca3ba55ca7
initial version
2018-03-05 00:46:24 +01:00
f1410a37f2
samle z after xyz cal. added, find_point_xy: initial z coordinate after first hit lowered
2018-03-04 23:49:54 +01:00
8800793dd1
removing debug code
2018-03-04 20:49:34 +01:00
ad702c6d1f
improved algorithm for first hit, improving sensor point changed, just one calibration round for 4point heatbed (no second run for improving measured coordinates)
2018-03-04 20:21:31 +01:00
85bc19b77c
force selftest if user upgraded from 3.1.2-RC1 or older fw version
2018-02-27 17:52:13 +01:00
e249e854da
dev version: print m114 coordinates when z endstop was triggered
2018-02-26 18:25:47 +01:00
73b0349898
fix - Z movement speed in selftest
...
conditional translation for linearity correction and variable resolution
2018-02-23 16:31:24 +01:00
49832d4d3b
Safety timer (disable heaters after 15min idle)
2018-02-22 16:46:17 +01:00
cff7b9b396
Unified the volumetric_multiplier with extrusion_multiply to improve
...
numeric accuracy and to reduce compuatitonal load. With this commit,
the numeric rounding is fixed not only for the M221 G-code
(as implemented by the preceding commit), but also for the volumetric
extrusion in general.
Removed the old FILAMENT_SENSOR code, which served the purpose
to modulate the volumetric multiplayer in real time depending
on the measured filament diameter. This feature will certainly not be
used by Prusa Research in the near future as we know of no sensor,
which would offer sufficient accuracy for a reasonable price.
2018-02-22 14:53:10 +01:00
4e3ea41ba4
Fix of a loss in precission when the extruder multiplier is set
...
with M221. For 50um layers, the precision loss leads to holes
in the print.
2018-02-22 14:52:36 +01:00
d020f48791
Merge pull request #485 from bubnikv/M221_fix
...
Unified the volumetric_multiplier with extrusion_multiply to improve
2018-02-22 14:17:09 +01:00
03a1bef4ee
Merge pull request #489 from PavelSindler/xyz_corrections_3
...
typo fixed
2018-02-22 13:41:22 +01:00
819f2fd2b3
typo fixed
2018-02-22 13:40:31 +01:00
30bb84a7a7
Merge pull request #487 from PavelSindler/eeprom_printer_versions
...
Eeprom hw versions
2018-02-22 11:48:26 +01:00
ad33d3efd1
Merge pull request #488 from PavelSindler/xyz_corrections_3
...
Xyz corrections
2018-02-22 11:48:06 +01:00
a4b3389dfa
M45 verbosity, steel sheet define, minor modifications in xyz cal
2018-02-22 10:38:46 +01:00
0323af531d
printer types and motherboard types added to eeprom; min extrude temp lowered because of woodfil
2018-02-22 00:09:12 +01:00
c5175e97ec
Pinout, conditional translation and variant file for MK2
2018-02-21 15:19:34 +01:00
ba49c21f17
Unified the volumetric_multiplier with extrusion_multiply to improve
...
numeric accuracy and to reduce compuatitonal load. With this commit,
the numeric rounding is fixed not only for the M221 G-code
(as implemented by the preceding commit), but also for the volumetric
extrusion in general.
Removed the old FILAMENT_SENSOR code, which served the purpose
to modulate the volumetric multiplayer in real time depending
on the measured filament diameter. This feature will certainly not be
used by Prusa Research in the near future as we know of no sensor,
which would offer sufficient accuracy for a reasonable price.
2018-02-21 11:25:21 +01:00
74e6ff67d3
Merge pull request #482 from bubnikv/M221_fix
...
M221 fix
2018-02-20 19:10:07 +01:00
e2e48bfd71
SD speed test (DEBUG)
...
homeaxis - fix set_destination_to_current
2018-02-20 18:50:20 +01:00
ee5949c56e
Fix of a loss in precission when the extruder multiplier is set
...
with M221. For 50um layers, the precision loss leads to holes
in the print.
2018-02-20 15:30:18 +01:00
57499dc6a0
M350 for E axis (8, 16, 32, 64, 128 microsteps)
2018-02-15 15:40:49 +01:00
79caf3d9c6
tmc2130 optimalization, accurate homing and microstep linearity correction
...
dcode D12 removed (no longer needed)
homeaxis optimized + xy home calibration support
new eeprom variables
new lcd menu edit types (byte3, mres, wfac), new menu "Experimental"
currents adjusted
2018-02-15 04:17:58 +01:00
08c59419da
Merge pull request #468 from PavelSindler/M600_currents
...
M600 unload current
2018-02-12 09:41:13 +01:00
b08636c554
fix - conditional translation for DEBUG build
2018-02-08 18:56:15 +01:00
a719ae1b01
whitespace
2018-02-08 16:33:43 +01:00
ebe1c10423
lower current for unload
2018-02-08 16:32:27 +01:00
9c4ce3623d
M600 unload current
2018-02-08 16:11:51 +01:00
29978c4126
TACH_1 must be defined to enable print fan error
2018-02-07 11:10:04 +01:00
abf956b86f
init
2018-02-06 09:19:27 +01:00
df754a322b
MK25 merge Xpila's changes
2018-02-06 08:33:26 +01:00
3bd892135a
erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used
2018-02-05 16:49:06 +01:00
4d8807e924
bugfix - failstats (total counters) reset to zero for empty eeprom (0xff)
2018-02-02 15:59:37 +01:00
2dd2c971e2
whitespace
2018-02-01 20:25:19 +01:00
8562235440
MK2.5 port - compilable version
2018-02-01 20:08:11 +01:00
d92f6292aa
unload with lowered current
2018-02-01 17:43:03 +01:00
9d8191323b
Merge pull request #440 from XPila/3.1.1-RC6
...
Extruder stealthChop and constant-off-time mode.
2018-01-31 20:21:02 +01:00
822dd8ff9c
Merge pull request #448 from PavelSindler/eeprom_versions
...
EEPROM version change: inform user on LCD that default settings were loaded
2018-01-31 20:06:19 +01:00
adc69eda18
PINDA temp. calibration warning messages.
2018-01-31 17:03:33 +01:00
4c5618c371
failstats - reset "last print" counters
...
card - new member variable "paused" (bool)
2018-01-31 15:09:36 +01:00
daaac2fb88
fail stats
2018-01-30 19:49:40 +01:00
210b97d16d
New fail stats (global, last print), crashdetection X and Y separated
2018-01-30 13:10:36 +01:00
88f248cb77
Inform user that hardcoded default settings were loaded (EEPROM version change)
2018-01-30 11:31:44 +01:00
cbcfcee48f
PID cal. is not sending OK periodically, print fan error pauses print in octoprint (not disconnecting), initialize serial line when swithing in settings menu
2018-01-25 15:23:11 +01:00
556205d993
Merge pull request #432 from PavelSindler/invalid_gcodes
...
invalid / unknown gcodes reported on serial
2018-01-24 00:12:47 +01:00
975ed14cb6
Merge pull request #431 from PavelSindler/fan_error_resume
...
SD card long pause update
2018-01-24 00:12:33 +01:00
b2ba72ffcd
Merge pull request #411 from PavelSindler/typo_fixed
...
typo fixed
2018-01-24 00:10:28 +01:00
777dcf072b
Merge pull request #430 from bubnikv/MK3_fsensor_fullrate
...
Optimization of the filament sensor.
2018-01-24 00:10:00 +01:00
70ff22571f
minor change
2018-01-23 20:04:18 +01:00
3adedb558b
invalid / unknown codes reported on serial
2018-01-23 20:01:02 +01:00
64a709c097
removed temporary debuging code
2018-01-23 19:14:52 +01:00
05e0abbd9d
startFileprint delayed
2018-01-23 19:11:04 +01:00
44dc12005f
Optimization of the filament sensor.
2018-01-23 16:47:42 +01:00
c38458eb67
init
2018-01-23 16:21:43 +01:00
09e0c566e8
Merge pull request #420 from bubnikv/MK3_stepper_blocking
...
Mk3 stepper blocking
2018-01-23 13:15:59 +01:00
69f97e0ec3
Separated the "Unknown" build from the "Development" build.
...
Documented purpose of the various build types.
2018-01-22 17:41:05 +01:00
a94e266cf1
Documented CPU load and frequency of the following interrupts:
...
9. ISR(INT7_vect) - Fan signal interrupt
26. ISR(M_USARTx_RX_vect) - USB to serial RX
37. ISR(USART1_RX_vect) - R-PI serial RX
2018-01-20 16:20:51 +01:00
815dfcb14b
Implemented a stepper timer reset after a long blocking cli()
...
or DISABLE_STEPPER_DRIVER_INTERRUPT().
If this is not done, the stepper interrupt would likely overflow,
leading to a maximum 32ms delay before the stepper interrupt wakes up.
In addition, the stepper timer overflow error would be reported
by the debug builds.
2018-01-20 15:39:21 +01:00
9e534c1990
Minimize risk of stepper routine interrupt blocking by reorganizing
...
the routine to move the G-code line length from the command queue
to the planner queue.
2018-01-20 14:37:22 +01:00
330f1576fc
Support for debug builds:
...
A build version and repository is displayed on the welcome screen,
D-codes, stack overflow check and stepper timer overflow check
are enabled in the debug mode.
2018-01-18 16:24:25 +01:00
b5f8b1d97c
Merge pull request #412 from PavelSindler/debug_version
...
initial message for debugging fw version
2018-01-18 13:18:16 +01:00
e60cb2a79e
unload filament sequence same as in M600
2018-01-17 21:54:34 +01:00
4843f2c48e
initial message not shown on release candidate versions
2018-01-17 17:38:34 +01:00
bfa675c1a4
initial message for debugging fw version
2018-01-17 16:00:19 +01:00
b73520bcea
successfull -> successful
2018-01-17 14:40:37 +01:00
fbf947b75c
maiden eeprom: tmc2130_mode is set to normal
2018-01-16 16:56:58 +01:00
026f68fd6f
Merge pull request #404 from PavelSindler/xyz_fixes
...
xyz homing hotfix, xyz cal. status changed
2018-01-16 01:39:57 +01:00
9efa1d3a03
Merge pull request #403 from PavelSindler/M600_update
...
timeout fix and unload message shortened
2018-01-16 01:39:18 +01:00
06c6cc119b
xyz homing hotfix, xyz cal. status changed
2018-01-16 01:00:09 +01:00
d8117eab66
timeout fix and MSG_UNLOAD_SUCCESSFULL message shortened
2018-01-15 17:39:42 +01:00
981a681e52
Temperature ISR synchronization, M600 - faster unload
2018-01-15 17:29:07 +01:00
87ffb0b193
Merge pull request #400 from PavelSindler/M600_update
...
M600 update
2018-01-15 15:27:41 +01:00
9e7686b77f
unload changes reverted back
2018-01-15 11:35:49 +01:00
c36af887b7
M600 has timeout for nozzle, different procedure for unload
2018-01-15 11:30:28 +01:00
9aedaa8fe7
build 146
...
hard limits
fsensor overflow fix
2018-01-14 23:59:43 +01:00
8bd84ba4fd
Merge pull request #396 from XPila/MK3
...
Mk3
2018-01-12 22:08:50 +01:00
82304a2268
Slight optimization of the fan speed interrupt routine by accessing
...
the Arduino millis() without locking interrupts.
2018-01-12 21:16:29 +01:00
ebf6d08fae
Crash detection - message on lcd (PFW-115)
2018-01-12 21:02:49 +01:00
1fbed53200
initial
2018-01-12 20:01:22 +01:00
cfae8f859d
Merge branch 'MK3' into fw_versions
2018-01-11 16:58:47 +01:00
PavelSindler
Marek Bel
Robert Pelnar
3d-gussner
Christoph Stahl
PavelSindler
MRprusa3d
MRprusa3d
bubnikv