ebd8375313
New ML support - external flash W25X20CL - upgrade is working!!! (hardcoded to german)
...
+print test (LT_PRINT_TEST)
2018-06-09 17:49:41 +02:00
c0946d8f04
New ML support - w25x20cl spi external flash support
...
+fixed some messages
+sec lang update test
2018-06-09 01:23:04 +02:00
31357379ff
Merge branch 'MK3' into time_remaining
2018-06-08 18:31:32 +02:00
8963757c3c
Merge branch 'MK3' into crash_detection_stop
2018-06-08 18:28:43 +02:00
5e120e6e52
power panic flow factor hotfix
2018-06-08 18:13:50 +02:00
332a23bef5
Crash detection stops and waits for user if it fails multiple times in short time frame
2018-06-08 16:08:07 +02:00
70bb851c62
New ML support - added missing file
2018-06-08 15:38:16 +02:00
739de5224e
Merge branch 'MK3' into MK3-new_lang
2018-06-08 14:38:00 +02:00
e69fd05fce
Optimized LiquidCrystal class
...
removed dependecies to arduino Print and String classes
spared 522 bytes of flash and 84bytes of ram
2018-06-08 14:35:47 +02:00
c29042dead
Fix warning:
...
Another fix from PR https://github.com/prusa3d/Prusa-Firmware/pull/138 and discussed in Issue https://github.com/prusa3d/Prusa-Firmware/issues/807
Ardunio IDE 1.6.8 and 1.8.5 result with Compiler warnings set to "More" or "All"
´´´
sketch\mesh_bed_calibration.cpp: In function 'sample_mesh_and_store_reference':
sketch\mesh_bed_calibration.cpp:2852:53: warning: 'zmax' may be used uninitialized in this function [-Wmaybe-uninitialized]
zmax = min(zmax, mbl.z_values[j][i]);
^
sketch\mesh_bed_calibration.cpp:2848:15: note: 'zmax' was declared here
float zmax = zmax;
^
´´´
2018-06-08 10:13:43 +02:00
37f82118c8
New ML support - lang select menu fix
2018-06-08 02:03:25 +02:00
59e65b7f47
New ML support - language select menu
...
+cond. translation for W25X20CL
2018-06-08 01:19:49 +02:00
bd1e410228
New ML support - W25X20CL external spi flash support
2018-06-08 00:20:28 +02:00
877f8f2a61
Merge pull request #795 from 3d-gussner/MK3_fix5
...
Fix warning: This is kind of important
2018-06-07 22:22:54 +02:00
a15f0138de
show estimated time to end of the print if available in gcode: initial version
2018-06-07 20:50:30 +02:00
42cfcb2601
Merge pull request #794 from stahlfabrik/M860-enhanced
...
Improved M860 - now wait for cooling of PINDA, too
2018-06-06 12:01:06 +02:00
eb1d17c3c6
Compile without c++11.
2018-06-05 21:55:54 +02:00
1290326210
Merge pull request #790 from PavelSindler/power_panic_flow_rate
...
power panic: extruder_multipliers added
2018-06-05 20:58:15 +02:00
6a8425f62d
Merge pull request #809 from mkbel/Use_Timer
...
Use timer
2018-06-05 20:54:41 +02:00
7f7f1e4560
Merge pull request #808 from zavorka/MK3
...
Eliminated the -Wliteral-suffix warnings from ultralcd.cpp
2018-06-05 20:53:03 +02:00
d49c4508a7
removing some debug code
2018-06-05 20:39:42 +02:00
264daaf715
typo fixed
2018-06-05 20:33:05 +02:00
aacaf67eaa
Crash detection/filament sensor: restore print from stored line number in case that we are printing over USB, retraction fix; debug: cmd queue on LCD
2018-06-05 20:28:41 +02:00
01af8a806b
Merge branch 'MK3' into Use_Timer
2018-06-05 19:03:11 +02:00
f819392d10
Do not create static object in function. Saves 8B RAM and 16B flash, because there is no need to guard constructor against concurrent calls.
2018-06-05 18:38:25 +02:00
7cc8b743c2
Add .gitignore. Setup doxyfile. Create project documentation main page. Document property of static object constructors on gcc-avr.
2018-06-05 18:30:02 +02:00
75f048ac4b
Add default doxyfile.
2018-06-05 18:23:48 +02:00
5f033d5a1a
Do not create static object in global function. Saves 8B RAM and 14B flash, because there is no need to guard constructor against concurrent calls.
2018-06-05 17:47:18 +02:00
e25b869b5e
Eliminated the -Wliteral-suffix warnings from ultralcd.cpp
2018-06-05 13:49:58 +02:00
746ac17e4e
debugging
2018-06-04 16:40:56 +02:00
47c68c884c
New ML support - fixed duplicate strings
2018-06-01 14:35:03 +02:00
53d9d8bd8a
New ML support - lang codes
...
+script tunning
2018-06-01 10:47:47 +02:00
5004433b20
Fix warning: This is kind of important
...
Again another fix from https://github.com/prusa3d/Prusa-Firmware/pull/138 made by @Thess for the MK2 branch which i think is quite important.
Ardunio IDE 1.8.5 result with Compiler warnings set to "More" or "All"
```
sketch\Marlin_main.cpp:3265:44: warning: the address of 'retracted' will always evaluate as 'true' [-Waddress]
if((echange<-MIN_RETRACT && !retracted) || (echange>MIN_RETRACT && retracted)) { //move appears to be an attempt to retract or recover
^
sketch\Marlin_main.cpp:3265:82: warning: the address of 'retracted' will always evaluate as 'true' [-Waddress]
if((echange<-MIN_RETRACT && !retracted) || (echange>MIN_RETRACT && retracted)) { //move appears to be an attempt to retract or recover
^
sketch\Marlin_main.cpp:3268:28: warning: the address of 'retracted' will always evaluate as 'true' [-Waddress]
retract(!retracted);
^
sketch\Marlin_main.cpp:3870:15: warning: statement has no effect [-Wunused-value]
```
I don't know if that helps making small pull requests as they are easier to review or it would make sense to combine few more.
Prusa should really review this pull [request](https://github.com/prusa3d/Prusa-Firmware/pull/138 ) again for the MK3 branch, as it was one that made warnings disapear in the MK2 branch and made finding new flaws in the code much much easier.
2018-06-01 10:17:03 +02:00
5a2b056d47
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
2018-06-01 00:43:16 +02:00
7c4fce7876
whitespace correction
2018-05-31 18:55:14 +02:00
73708ec883
Improved M860 - now wait for cooling of PINDA, too
...
The M860 - wait for PINDA temperature - gcode has been improved. Until now it could only wait until the PINDA has been warmed up to a set temperature. Now it also can wait until the PINDA has cooled down to a set temperature. The calling syntax has not been changed at all. The logic now looks if the bed or hotend have a target temperature different from 0. If so, the code waits until PINDA has warmed up. Otherwise it waits until PINDA has cooled down.
Applications:
- Possibility to start a Print at exactly the right PINDA temperature. (Do not start the heater until PINDA is cooled down)
- Much easier manual temperature calibration (automating the wait for cool down in between calibration runs)
- Possibility for temp calibration verification on one heat bed by printing multiple objects with different PINDA temperatures one after the other
2018-05-31 16:41:59 +02:00
957b3cfac5
Merge pull request #783 from 3d-gussner/MK3_fix1
...
Fixed redefined warning
2018-05-31 14:21:41 +02:00
d70d38bb0c
Merge pull request #784 from 3d-gussner/MK3_fix2
...
Fixed unused variable c as in pull request #138
2018-05-31 14:15:17 +02:00
80c641ae5d
Merge pull request #789 from 3d-gussner/MK3_fix4
...
Fixed warning: invalid suffix on literal; C++11 requires a space betw…
2018-05-31 14:09:49 +02:00
731fef3d32
Fix remaining forgotten comments
2018-05-30 23:15:01 +02:00
77f3160531
language.h - debug output conditional translation
2018-05-30 20:15:43 +02:00
37e575f4bc
New ML support - debug output, bootloader
...
bootapp - automaticaly erase flash when necessary
+test code
2018-05-30 19:29:52 +02:00
9104b0601a
power panic: extruder_multipliers added
2018-05-30 18:59:33 +02:00
eeca0f683b
Fixed warning: invalid suffix on literal; C++11 requires a space between literal and identifier [-Wliteral-suffix]
2018-05-30 16:06:22 +02:00
3bf47d7f83
"run xyz cal first" message
2018-05-30 15:29:59 +02:00
dcb77e8c7e
Merge remote-tracking branch 'upstream/MK3' into temp_cal_coordinates_fix
2018-05-30 15:22:20 +02:00
987f8969c0
Merge remote-tracking branch 'upstream/MK3' into temp_cal_coordinates_fix
2018-05-30 15:20:40 +02:00
72a382b34d
fix in macro definition
2018-05-30 15:07:24 +02:00
2561ab9c7d
Merge pull request #786 from XPila/MK3-new_lang
...
Mk3 new lang
2018-05-30 14:54:47 +02:00
3e29312b41
fixed compilation (c++11)
2018-05-30 14:53:14 +02:00
d8706be8de
Fixed forgotten comment
2018-05-30 13:39:24 +02:00
dce2d45499
Fixed forgotten comment
2018-05-30 13:35:48 +02:00
2f9b63275f
Fixed unused variable c as in pull request #138
2018-05-30 13:26:31 +02:00
167bc61ef9
Fixed redefined warning
2018-05-30 12:57:51 +02:00
4746c77195
New ML support - bootloader support and update proces test
2018-05-29 21:03:47 +02:00
0ddb31d4eb
Removed hexfile
2018-05-29 17:28:33 +02:00
b47a29b388
New ML support - fixed invalid characters, added some cz translations
2018-05-29 15:56:00 +02:00
d307868a90
merge with upstream
2018-05-28 20:38:55 +02:00
26724c4a48
removed message
2018-05-28 20:31:57 +02:00
7e79ce8e53
MK3: crash detection for Z axis is active during auto home and mesh bed leveling (normal mode is forced for Z movents); temp cal coordintes corrections; temp cal: xy movents always in safe Z distance from heatbed, Z-axis homing improved
2018-05-28 20:26:15 +02:00
b3f4e1f6e4
New ML support - language menu
2018-05-28 19:41:16 +02:00
baa66a0887
New ML support - secondary language name, language selection
2018-05-28 17:14:55 +02:00
3bf2552b6c
fixed #761 from hzapper (#elif instead of #else if)
2018-05-28 13:41:36 +02:00
28a767b460
Merge pull request #760 from PavelSindler/safety_timer_fixes
...
Safety timer not active during filament runout procedure
2018-05-28 13:28:24 +02:00
58ae70c4e1
Merge branch 'MK3' into MK3-new_lang
2018-05-28 13:22:14 +02:00
15207e4d5e
Linearity correction fix - (eeprom storage changed to byte instead of word)
...
+enabled for XYZ axes
2018-05-28 01:47:08 +02:00
def9ab56f6
New ML support - language.c - fixed return origial string for zero length translation
2018-05-27 16:24:21 +02:00
55157640c5
New ML support - czech version is working!!!
...
postbuild.sh, make_lang.sh - fixed (id and offset calculation)
language.c, language.h - fixed (==||==)
config.h - reserved space for _SEC_LANG changed
Marlin_main.cpp - debug output + hardcoded lang_select(1) //means cz
2018-05-27 15:14:04 +02:00
2ffb95c72a
bugfix: use absolute coordinates for steel sheet removal position, because there is no homing at the beginning of calibration in case that position is already known
2018-05-24 20:28:00 +02:00
64f7272ea7
M27: returns print saved (fixes setting temperatures to zero during crash detection)
2018-05-24 18:49:35 +02:00
2cf20c8c99
New ML support - migration - fix_source_1.sh script (replace 'MSG_xx' with '_T(MSG_xx)')
...
+ output + fixed source
2018-05-23 16:37:08 +02:00
da3432e237
New ML support - changed _SEC_LANG reserved space to 10kb, added debug code
2018-05-23 16:11:12 +02:00
f00a9ce636
New ML support - language.c, language.h - code fixed, Marlin_main.cpp - debug output
2018-05-23 15:46:08 +02:00
d979c3dffc
New ML support - messages.c - some strings fixed
2018-05-23 14:18:37 +02:00
0091b41fb5
Merge pull request #744 from PavelSindler/M860_fix
...
M860 fix: send busy messages
2018-05-23 13:15:46 +02:00
7e3f675469
New ML support - migration - fixed some messages
...
all variants verified according to lang_en.txt (release only)
config.h updated (enabled ML support)
2018-05-22 20:30:55 +02:00
8c9b670c76
Merge pull request #746 from MRprusa3d/MK3
...
menu returns corrections
2018-05-22 16:08:08 +02:00
137e1c5027
whitespace
2018-05-22 13:33:31 +02:00
d63a17c696
Safety timer not active during filament runout detection
2018-05-22 13:31:21 +02:00
bd587faab9
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 03:20:03 +02:00
8573b65b05
_MIN_ENDSTOP_INVERTING redefinition in variant files (constant -> define)
2018-05-21 23:28:28 +02:00
a184d2b824
Merge pull request #756 from XPila/MK3-new_lang
...
Mk3 new lang
2018-05-20 13:26:28 +02:00
a528f8837c
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
2018-05-20 13:24:52 +02:00
5b015907aa
New localization - macro declarations fixed
2018-05-20 13:15:46 +02:00
9b7eeaecaa
version changed
2018-05-18 14:42:35 +02:00
503d5551e6
Fix build of MK2. Global variable distance_from_min was removed, do not update it.
...
Expression
float y = vec_x[1] * pgm_read_float(bed_ref_points_4+mesh_point*2) + vec_y[1] * pgm_read_float(bed_ref_points_4+mesh_point*2+1) + cntr[1];
is identical with expression in count_xyz_details().
2018-05-16 18:40:36 +02:00
3eb21b65ed
wizard fix: don't reset calibration status when repeating first layer cal.
2018-05-15 23:19:23 +02:00
83aa710da6
menu returns corrections
...
Settings::FilamentSensor & FilamentAutoload
removing Calibration::ShowEndStops @ MK3
2018-05-15 20:23:22 +02:00
c59e9bd6be
M860 fix: send busy messages
2018-05-15 18:27:25 +02:00
553779a65d
Merge pull request #723 from mkbel/refactor_bed_geometry
...
Refactor bed geometry
2018-05-14 17:18:03 +02:00
b71a29ad96
Use ShortTimer instead of long_press_timer global variable.
2018-05-11 17:05:12 +02:00
02ecd08786
Convert Time class to template, instantiate LongTimer for longer and ShortTimer for shorter periods.
2018-05-11 16:31:42 +02:00
07a7ce1acf
Remove unused lcd_ping_allert().
2018-05-11 15:09:27 +02:00
e8730c2899
Merge branch 'MK3' into read_xyz_cal
...
# Conflicts:
# Firmware/ultralcd.cpp
2018-05-10 18:31:31 +02:00
329ea199ec
Show measured bed offset from expected position even if not homed. Remove redundant lcd_quick_feedback() calls.
2018-05-10 18:24:49 +02:00
dd89226537
Merge pull request #722 from MRprusa3d/MK3
...
build instructions update
2018-05-10 14:44:55 +02:00
2bfc7475a8
version changed
2018-05-09 18:58:24 +02:00
2a5a7ab9d2
Add bed calibration points macro definitions to MK25 variants.
...
Homing and full print area printing tested on MK25.
2018-05-09 17:09:57 +02:00
59f3f9d8ec
New localization - includes fixed
2018-05-09 16:55:41 +02:00
80efafd7b9
menu returns corrections
...
Statistics
Calibration::ShowEndStops
Support::ExtruderInfo
Support::BeltStatus
Support::Temperatures
Support::Voltages
2018-05-09 00:27:32 +02:00
f00bde09a4
Re-factor bed calibration point coordinates to match bed CAD data. Tested successfully on MK3 (auto home position not calibrated and calibrated printer and print area position of calibrated printer). MK25 not tested.
2018-05-08 21:54:11 +02:00
737cb9608c
Merge pull request #716 from mkbel/calibrate_Z_via_live_adjust
...
Set calibration status to calibrated also by using live adjust Z.
2018-05-04 16:40:34 +02:00
c359d11858
Do not disable bed heating, when the print is paused.
...
Also remove duplicate handleSafetyTimer() call.
2018-05-04 15:21:22 +02:00
1d7b3ea2de
Set calibration status to calibrated also by using live adjust Z.
...
This fixes problem, that if the first layer calibration is never done, live adjusting Z during printing is not applied after printer reset. Also repeatedly using live adjust Z on uncalibrated printer leads to steadily decreasing meaningless stored live adjust Z value.
2018-05-03 22:03:38 +02:00
777beac66a
Merge pull request #713 from PavelSindler/fan_error_fix
...
fan error synchronization with planner
2018-05-03 16:01:00 +02:00
cd3851e175
Merge pull request #715 from MRprusa3d/MK3
...
Mk3
2018-05-03 14:54:43 +02:00
8a92d9b6a3
MaR::180501b
2018-05-02 23:49:21 +02:00
d02333918f
MaR::180501
2018-05-02 22:13:47 +02:00
72364648dd
Hot fix: Can not move X and Y axis in stealth mode, when the printer is not homed.
...
Disable endstops in move axis menu.
2018-05-02 20:50:47 +02:00
d86d1beeaa
fan error synchronization with planner
2018-05-02 16:16:48 +02:00
3d595cc523
Merge pull request #712 from XPila/MK3-V3_2
...
Mk3 v3 2
2018-05-02 13:43:07 +02:00
964d019dd1
MK3 - extruder current = 30
2018-05-02 13:42:05 +02:00
420d1079af
terminate temperature calibration in case that Z probing function returns false
2018-04-30 17:51:44 +02:00
b691225d0b
Merge pull request #701 from XPila/MK3-V3_2
...
Decreased stallguard sensitivity for Z axis because meshbedleveling f…
2018-04-30 16:58:18 +02:00
1fc3f9816c
Merge remote-tracking branch 'upstream/MK3' into MK3-V3_2
2018-04-30 16:29:02 +02:00
47868145e6
Decreased stallguard sensitivity for Z axis because meshbedleveling failed on some printers (PFW298).
2018-04-30 16:28:26 +02:00
e2b3553aee
Merge pull request #689 from PavelSindler/MK3_for_merging
...
version change
2018-04-27 20:01:37 +02:00
e1b95ed2a7
version change
2018-04-27 19:59:22 +02:00
12dda6a6ca
Merge pull request #688 from PavelSindler/MK3_for_merging
...
MK3 variants file change
2018-04-27 18:41:49 +02:00
068ee08454
MK3 variants file change
2018-04-27 18:41:00 +02:00
2a57325bd5
Merge pull request #685 from mkbel/add_safety_timer_notice
...
Show full screen blocking notification message after heater turned off
2018-04-27 17:24:33 +02:00
2b42db8ace
Merge pull request #687 from PavelSindler/MK3_for_merging
...
M861: steps value for 35C
2018-04-27 17:24:18 +02:00
265d4761a3
M861: steps value for 35C
2018-04-27 17:07:10 +02:00
e69134eb1c
Rambo 1.0 support (MK25, MK2)
2018-04-27 17:04:55 +02:00
eced66f0f6
Show full screen blocking notification message after heater turning off by safety timer.
2018-04-27 16:23:20 +02:00
6fb0fa1458
variants for MK3: temporary change
2018-04-27 15:19:28 +02:00
99be28d335
variants file: force selftest enabled again
2018-04-27 14:59:56 +02:00
986f9fd3a6
selftest correction
2018-04-27 14:49:37 +02:00
acd308e3d4
safety timer prolonged to 30 minutes
2018-04-27 14:03:09 +02:00
ce855f30e2
Merge pull request #678 from PavelSindler/calibrate_autohome
...
MK3 selftest: move Z axis higher before calibrating autohome
2018-04-27 13:35:45 +02:00
9e0e152279
Merge pull request #674 from mkbel/hot_fix_print_area_crop
...
Hot fix print area crop on MK3.
2018-04-27 13:35:31 +02:00
254804cc8d
MK3 selftest: move Z axis higher before calibrating autohome
2018-04-27 09:23:56 +02:00
75075bed31
Hot fix print area crop on MK3. Move print area -2mm in Y axis (Y_PROBE_OFFSET_FROM_EXTRUDER to 3). Do not limit print area for skewed axis (increase Y_MAX_POS to 212.5). Preserve Z homing point for uncalibrated printer (DEFAULT_Y_OFFSET to 2.f).
2018-04-26 22:01:28 +02:00
aeca8cbf69
Merge pull request #671 from PavelSindler/temp_comp_unsigned
...
M861 update: unsigned values
2018-04-26 21:07:45 +02:00
84d5771845
Merge pull request #670 from XPila/MK3-V3_2
...
XYZcal - findpointcenter starting Z coordinate down by 50um
2018-04-26 19:56:50 +02:00
e7cf68e038
whitespace
2018-04-26 19:27:07 +02:00
2dd0d84845
M861: usteps and z_shift variables correction
2018-04-26 19:14:28 +02:00
9c3e0aab36
M861 update: use signed values
2018-04-26 18:55:08 +02:00
d50dd9a6e9
XYZcal - findpointcenter starting Z coordinate down by 50um
2018-04-26 18:41:56 +02:00
ab68221976
Always show XYZ cal. details menu.
2018-04-26 16:36:03 +02:00
1a80fc28e8
Add zero point offset information support menu.
...
Note: XYZ menu is shown only if not printing and printer must me homed to show non-zero value.
2018-04-26 16:36:03 +02:00
b6888470cf
Save 42 bytes of flash by removing duplicate string "--------------------".
2018-04-26 16:36:02 +02:00
c1dd269a92
Fix missing degree symbol after returning to status screen. Those lcd_set_custom_characters* calls were redundant.
2018-04-26 16:36:02 +02:00
d6aa149cfa
Conserve 58 bytes of flash by returning by reference.
2018-04-26 16:36:02 +02:00
ae08788c99
Split lcd_service_mode_show_result screens to separate functions. Make them non blocking. Remove global array distance_from_min, pass it as function return value. Make Support submenus returning to Support menu.
2018-04-26 16:36:02 +02:00
2657d3febd
MK25: SILENT_MODE_NORMAL changed to SILENT_MODE_POWER
2018-04-26 15:12:45 +02:00
14cf4abb64
Merge pull request #668 from XPila/MK3-V3_2
...
Timer in autoloadmenu - dirty hack (unable to compile under 4.8.1)
2018-04-26 14:53:49 +02:00
84a53370d3
temporary change in MK3 variants file: disable forced selftest
2018-04-26 14:50:16 +02:00
f64d266c89
Timer in autoloadmenu - dirty hack (unable to compile under 4.8.1)
2018-04-26 14:50:01 +02:00
4681361883
correction in M27 message
2018-04-26 11:50:48 +02:00
9a6cc8a035
Merge pull request #664 from MRprusa3d/MK3
...
Mk3
2018-04-25 22:20:45 +02:00
cf0c83a6c1
M27 fix
2018-04-25 21:23:38 +02:00
7e462b3224
Merge branch 'MK3' into MK3
2018-04-25 19:15:36 +00:00
2f49574822
Add files via upload
2018-04-25 18:48:15 +00:00
0b6644915a
Add files via upload
2018-04-25 18:47:19 +00:00
d85a8077a8
M115 update
2018-04-25 20:39:10 +02:00
e7ad81e159
Merge pull request #660 from mkbel/fix_z_home_point
...
Update documentation of mesh_bed_calibration.cpp.
2018-04-25 17:27:22 +02:00
d2736fdacf
Merge pull request #662 from mkbel/fix_return_autoload
...
Return from Autoload filament and Load filament menu item to parent m…
2018-04-25 17:26:56 +02:00
f207145752
Return from Autoload filament and Load filament menu item to parent menu.
...
Exception is Load filament, when temperature is sufficient to load filament, in such case, load filament is started and GUI returns to status screen.
2018-04-25 16:51:35 +02:00
0271ab3643
Meshbedleveling, calibration Z
...
check crash Z (MK3)
check deviation of Z-probe (>50um == error, all printers)
kill with message "debris on nozzle..."
2018-04-25 16:19:16 +02:00
5f12289339
CalibrationZ/MK3 - check crash Z after homeaxis (kill with message "debris on nozzle...")
2018-04-25 14:43:32 +02:00
3abfeb831f
Update documentation of mesh_bed_calibration.cpp.
2018-04-25 12:21:20 +02:00
5bb9451b5d
Merge pull request #658 from XPila/MK3-V3_2
...
Meshbedleveling/MK3 - check crash Z after homeaxis (kill with message…
2018-04-24 20:54:53 +02:00
1553e99d8e
Meshbedleveling/MK3 - check crash Z after homeaxis (kill with message "debris on nozzle...")
2018-04-24 20:12:29 +02:00
5a9cc39562
Merge pull request #654 from XPila/MK3-V3_2
...
New current setting for MK3
2018-04-24 17:10:19 +02:00
f9d64bdfb1
Merge pull request #655 from mkbel/fix_z_home_point
...
Fix z home point
2018-04-24 16:51:57 +02:00
79b9f736aa
Merge pull request #657 from PavelSindler/temp_cal_update
...
Temp calibration update
2018-04-24 15:16:13 +02:00
8efe66ef99
remove tab
2018-04-24 14:34:49 +02:00
ffe93b2ca9
whitespace correction
2018-04-24 14:33:48 +02:00
cc74edfa13
whitespace
2018-04-24 14:23:52 +02:00
010ceceff9
add another homing after steel sheet is removed; added timeout for pinda cooling; if PINDA doesn't trigger before reaching Z = -1mm, temp. calibration fails
2018-04-24 13:43:51 +02:00
468645e92e
Set DEFAULT_Y_OFFSET to 4 mm for MK3 printer.
2018-04-23 20:34:04 +02:00
37ebe5c35d
Move default correction matrix of not calibrated printer to world2machine_default() function. Use world2machine_reset() to uncorrected matrix. Call it from world2machine_revert_to_uncorrected() and from world2machine_default() if there is no default shift to remove code duplication.
2018-04-23 20:33:39 +02:00
9bd4d580d7
Use right calibration point. This change is only formal, as both original and new point have same coordinates.
2018-04-23 20:33:25 +02:00
cccd8246ab
Fix world2machine(const float &x, const float &y, float &out_x, float &out_y) not using input parameters if only WORLD2MACHINE_CORRECTION_SHIFT is applied.
2018-04-23 20:33:14 +02:00
864284f043
New current setting for MK3
...
X, Y: no change
Z: +26.1%
E: -28.5%
2018-04-23 20:17:45 +02:00
2467b19dd2
Merge pull request #647 from XPila/MK3-V3_2
...
XYZ cal fix (better histogram processing)
2018-04-23 14:54:23 +02:00
82b31e8552
Set [0;0] point offset for uncalibrated printer.
2018-04-20 15:01:11 +02:00
65aa62ebab
XYZ cal fix (better histogram processing)
2018-04-20 13:17:18 +02:00
043c8c66be
waiting for pinda probe cooling
2018-04-19 16:55:00 +02:00
31ae097dba
mesh bed leveling / auto home Y coordinates updated
2018-04-18 17:09:12 +02:00
5791d9f0d8
EEPROM address conflict fix; forcing selftest can happen only in case that we have TMC2130 drivers
2018-04-18 14:17:28 +02:00
cf99808aef
Merge pull request #624 from mkbel/update_version
...
Update version.
2018-04-13 19:55:21 +02:00
af6c1f8acb
Update version.
2018-04-13 19:53:51 +02:00
b90e8999df
Merge pull request #623 from mkbel/fix_safety_timer
...
Fix safety timer.
2018-04-13 19:43:36 +02:00
c88f0108af
Fix safety timer.
...
Constant parameter greater than 16 bits must by stated as unsigned long.
2018-04-13 19:30:08 +02:00
c5af3aaaf2
Merge pull request #622 from mkbel/fix_menu_return_fail_stats
...
Fix returning from Fail stats menu.
2018-04-13 18:35:03 +02:00
6f985d23d6
Fix returning from Fail stats menu.
2018-04-13 17:20:30 +02:00
03d03aeac4
Return to main menu from filament unloading.
2018-04-13 16:51:47 +02:00
e4a4c88be9
Merge pull request #615 from PavelSindler/selftest_MK25_fix
...
selftest for MK2.5: fan error fix
2018-04-13 13:59:15 +02:00
f3209e1aec
fixed possible feedmultiply change cause by entering main menu with negative encoder position
2018-04-13 10:27:55 +02:00
b1bb6841c9
Merge pull request #617 from mkbel/fix_farm_reset_1
...
Fix farm reset
2018-04-13 10:02:54 +02:00
5f3fed33cf
Merge pull request #613 from MRprusa3d/MK3
...
Add files via upload
2018-04-13 10:02:44 +02:00
388d6eea36
Fix printer resets in farm mode if command "PRUSA SN" is received and 32U2 processor is not responding.
2018-04-12 18:44:33 +02:00
08740356b8
Move "PRUSA SN" gcode to separate function.
2018-04-12 18:41:11 +02:00
591cb881cc
selftest: false fan error fix, added message in case that manual fan error fails
2018-04-12 18:24:30 +02:00
d09f190c2b
Add files via upload
2018-04-11 18:48:50 +00:00
78245ce566
farm preheat temperature for heatbed
2018-04-11 18:54:27 +02:00
e150d502ac
removed configuration_prusa
2018-04-11 18:49:42 +02:00
53d903e600
Merge pull request #610 from MRprusa3d/MK3
...
Add files via upload
2018-04-11 18:46:18 +02:00
6b5835fd9f
Merge pull request #612 from PavelSindler/M861_gcode
...
M861 gcode, temp cal is automaticly activated after calibration process
2018-04-11 18:45:57 +02:00
45d1dbbfe0
temp cal. active set to false
2018-04-11 18:37:07 +02:00
ce66699340
dont use default temp table for new printers and dont automaticly activate temp. cal. (new pinda probes have different characteristics)
2018-04-11 18:36:38 +02:00
52de4891fe
typo fixed
2018-04-11 18:32:27 +02:00
47eab97d2d
temp. calibration is automaticly activated after calibration process
2018-04-11 18:16:16 +02:00
0ba7850146
pinda temp table changed back
2018-04-11 17:40:04 +02:00
c69524c3fb
Merge pull request #611 from XPila/MK3-V3_2
...
removed Configuration_prusa.h
2018-04-11 17:33:37 +02:00
89efcb84b1
removed Configuration_prusa.h
...
fixed - compilation for MK25
2018-04-11 17:32:31 +02:00
919fba531a
wait for PINDA gcode changed
2018-04-11 16:48:47 +02:00
c8f1c55ec0
Add files via upload
2018-04-11 14:41:41 +00:00
f70685a92d
Merge pull request #542 from stahlfabrik/MK3_PINDA_TEMP_WAIT_GCODE
...
MK3 Add Gcode to wait for minimum PINDA temp
2018-04-11 16:40:21 +02:00
1e1531a4f8
Merge pull request #608 from MRprusa3d/MK3
...
Mk3
2018-04-11 16:37:34 +02:00
8da2330b93
FSensor PAT9125 - i2c ACK check + two attempts in init function (PFW).
...
ultralcd_implementation_hitachi - fixed link
2018-04-11 16:03:54 +02:00
716f1c63bf
Add files via upload
2018-04-10 18:08:57 +00:00
6b77e68924
Add files via upload
2018-04-10 18:07:08 +00:00
02fda70529
farm mode: preheat menu updated
2018-04-10 14:07:44 +02:00
da43aa0250
XYZ calibration tunning
2018-04-04 20:03:39 +02:00
3b26e1635a
XYZcal - better filtering.
2018-04-03 20:10:50 +02:00
630041ecb2
XYZcal - threshold changed from 32 to 16
2018-04-03 18:49:15 +02:00
339d2ebdef
Z-axis stealth mode
...
XYZcal fix
2018-04-03 18:26:39 +02:00
869a99d8ad
XYZ calibration - diagonal find_point_center
2018-04-03 15:05:57 +02:00
92997204a1
Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20
2018-04-03 12:30:35 +02:00
baade7db61
Removed unused files (ST7565R-dogm, digipot)
...
renamed functions digipot_init and digipot_current
fixed cond. trans. (menus)
fixed variant files - MK25, MK3
2018-03-29 23:01:13 +02:00
dba2fd7e75
Merge pull request #589 from XPila/MK3-V3_2
...
New SPI, LiquidCrystal renamed
2018-03-29 18:20:29 +02:00
363a9d24b3
LiquidCrystal class renamed to LiquidCrystal_Prusa
2018-03-29 17:50:43 +02:00
186e630299
New SPI (do not use Arduino SPI class)
...
saved ~300bytes flash, 4bytes ram
2018-03-29 17:42:41 +02:00
cedb30303f
Add possible action on menu item back. This fixes broken Merge pull request #586 from mkbel/ustep_linearity_2 06d5ec5.
2018-03-29 11:42:44 +02:00
d5636fd023
Merge pull request #585 from PavelSindler/farm_mode_MK3
...
checking if file is complete temporarily not active in farm mode
2018-03-28 19:39:00 +02:00
06d5ec5659
Merge pull request #586 from mkbel/ustep_linearity_2
...
Ustep linearity
2018-03-28 19:38:34 +02:00
ffdd11e960
Merge pull request #587 from XPila/MK3-V3_2
...
Mk3 v3 2
2018-03-28 19:38:20 +02:00
bde097cad1
bugfix - PFW233 - first homing in silent mode Y crash.
2018-03-28 19:22:20 +02:00
9cb036fbcb
Merge remote-tracking branch 'prusa3d/MK3' into ustep_linearity_2
2018-03-28 19:11:02 +02:00
40a064ffbc
Add extruder linearity correction to settings menu.
2018-03-28 18:53:37 +02:00
6e15a77c9b
preheat menu update
2018-03-28 17:50:16 +02:00
95e751dd65
farm mode: preheat menu update
2018-03-28 17:04:46 +02:00
2c3c6c54f3
checking if file is complete temporarily not active in farm mode
2018-03-28 17:00:17 +02:00
8ba83a9789
bugfix - PFW226 - selftest error
2018-03-28 16:13:54 +02:00
678cd17e7b
Increase size of EEPROM_TMC2130_WAVE_*_FAC to 16 bits.
2018-03-28 16:13:16 +02:00
cf43b85de9
XYZ calibration - accuracy improvement
2018-03-27 17:27:41 +02:00
57bbb0e17d
Fix wraparound from lowest value to highest value in menu value edit.
2018-03-26 20:25:23 +02:00
397e7d4791
Increase resolution of wave factor.
2018-03-26 15:17:06 +02:00
903dce9716
Merge pull request #576 from PavelSindler/MK3_for_merging
...
stealth mode / silent mode
2018-03-23 20:42:08 +01:00
2ce75293f3
stealth mode / silent mode
2018-03-23 19:49:59 +01:00
5a7e76e02b
Merge pull request #575 from PavelSindler/adc_pins
...
Adc pins, pinda temp table
2018-03-23 19:36:23 +01:00
dc32bd24fc
correction
2018-03-23 18:20:55 +01:00
2d30261976
bed voltage menu hidden
2018-03-23 16:49:06 +01:00
7ad6fb526c
typo removed
2018-03-23 15:53:44 +01:00
78f9f6b611
use defines for adc pins, temp table for PIDNA update
2018-03-16 11:01:06 +01:00
e5faba7226
serial port set back (was previously changed for debugging purposes)
2018-03-15 14:42:03 +01:00
08ec920d33
merge with upstream
2018-03-15 14:25:17 +01:00
3d299cc412
Document.
2018-03-14 21:05:47 +01:00
4bc1671953
version=3.2.0-alpha buildnumber=370 repository=Unknown
2018-03-14 16:33:50 +01:00
67e90b576a
Disabled force selftest
...
XYZ calibration tunning
2018-03-14 16:25:32 +01:00
863fe1f054
show message that printer is not connected to monitoring on printer start
2018-03-14 15:35:39 +01:00
3ff5686336
MK2-25-3 variant files
2018-03-14 13:53:36 +01:00
2f98ac989a
Variant file for MK2 + cond. translation
2018-03-13 23:14:44 +01:00
81cd96b8fe
Variant file for MK25 + cond. translation
2018-03-13 23:02:46 +01:00
c163d8a9f7
Variant file for MK3
2018-03-13 22:40:20 +01:00
46cecb1bdf
deleted unused file
2018-03-13 20:44:06 +01:00
ac1a56b493
Merge branch 'MK25' into MK3
2018-03-13 20:43:19 +01:00
27cc5e51c3
removed duplicit declaration of prusa_statistics function
2018-03-13 19:12:36 +01:00
5d389a2c36
Farm mode: when print finishes, ask which filament was used for print; statistics modified
2018-03-13 19:11:02 +01:00
a3ad74a6be
status screen fix
2018-03-13 19:08:19 +01:00
8ec3c0fd7e
removed "Printer disconnected" message
2018-03-13 18:50:56 +01:00
f45f206faf
sorting files disabled in farm mode, start printer status needs reponse from monitoring
2018-03-13 18:50:11 +01:00
ddeb7b8c84
statistics improved, initial version of function which forces user to connect printer to monitoring
2018-03-13 18:43:42 +01:00
16f9f35451
static_assert replaced with error directive
2018-03-13 16:47:38 +01:00
0c97f46f25
Merge pull request #551 from XPila/MK3-new_xyz_cal
...
New XYZ calibration with image processing
2018-03-13 16:17:50 +01:00
a23ac6db7d
Merge pull request #550 from mkbel/safety_timer_MK3
...
Safety timer (disable heaters after 15min idle)
2018-03-13 15:03:45 +01:00
701dc55f4e
Merge pull request #549 from mkbel/safety_timer
...
Safety timer (disable heaters after 15min idle)
2018-03-13 15:02:09 +01:00
f487691070
Merge pull request #536 from mkbel/menu_return
...
Menu return
2018-03-13 14:30:48 +01:00
98e96c9182
Merge pull request #457 from bubnikv/MK3_fast_dbg
...
Mk3 fast dbg
2018-03-13 14:13:29 +01:00
65a91b366d
New XYZ calibration with image processing
2018-03-13 12:55:35 +01:00
6b08cdeaf1
Safety timer (disable heaters after 15min idle)
2018-03-12 23:45:10 +01:00
262e800db7
Safety timer (disable heaters after 15min idle)
2018-03-12 23:35:50 +01:00
1df91e5656
MK3 Add Gcode to wait for minimum PINDA temp
...
The PINDA temperature compensation is defined for values above 35C. To achieve an optimal first layer consistently it is vital to start the print with a temperature of >= 35C on the pinda probe.
When doing a manual pinda temperature calibration it is necessary to begin homing and mesh bed leveling at an exact temperature. This gcode is perfect for this.
Example startup code:
G28 W ; home all without mesh bed level
G0 Z50 ; raise Z to not heat PINDA before bed is warm
M104 S215 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S215 ; wait for extruder temp
G0 X50 Y50 Z0.15 ; this is a good PINDA heating position
M666 S35 ; the new code - wait until PINDA is >= 35C
G28 W ; home all without mesh bed level
G80 ; mesh bed leveling
See my forum post later for more explaination on my manual temperature calibration procedure. I will link it then.
2018-03-09 20:46:07 +01:00
66dc65ecd4
version changed
2018-03-09 14:15:47 +01:00
d512c9c9c2
version changed
2018-03-08 14:48:01 +01:00
976e5a6a19
Temperature calibration - remove steel
2018-03-07 21:45:55 +01:00
b902d91760
changed version
2018-03-07 21:02:07 +01:00
b41d680adf
Replace problematic character in comment.
2018-03-07 20:58:15 +01:00
8ff028820a
Remove redundant parameter.
2018-03-07 20:55:01 +01:00
abb9aa0a16
not using homing currents in axis selftest
2018-03-07 20:42:15 +01:00
2a53686d2f
Document valid usage of lcd_goto_menu(), remove redundant parameter.
2018-03-07 20:40:59 +01:00
1aba608133
Document valid usage of lcd_goto_menu(), wrap lcd_second_serial_set() by HAS_SECOND_SERIAL_PORT macro.
2018-03-07 18:30:33 +01:00
0c961dedc4
Reset menu stack in lcd_return_to_status().
...
Mark menuStack.reset() as redundant in lcd_status_screen(), but leave it there to be sure.
2018-03-07 18:15:24 +01:00
716098c434
Preserve position in menu move axis Extruder.
2018-03-07 17:27:27 +01:00
d0a98dc6cc
Document valid usage of lcd_goto_menu().
2018-03-07 17:18:10 +01:00
0871925353
Remove special handling of lcd_move_z after long button press. Convert lcd_move_z after long button press to ordinary menu_action_submenu.
...
Known bug (feature) is, that with current maximum stack depth, when long press is activated in menu > settings > move axis > Move X and then Move Z is deactivated, menu is returned to "move axis" and not to "Move X".
2018-03-07 17:03:17 +01:00
77c3d7d7f7
Review and document lcd_adjust_bed_reset() lcd_goto_menu() usage.
2018-03-07 16:47:20 +01:00
f41584524e
Merge pull request #534 from PavelSindler/M221_fix
...
Fix of a regression bug, caused by pre-calculating the extrudemultiply
2018-03-07 16:13:16 +01:00
6ba07a358b
Fix of a regression bug, caused by pre-calculating the extrudemultiply
...
for precission and performance: calculate_extruder_multipliers()
has to be called after extrudemultiply is changed from the printer panel.
2018-03-07 16:08:19 +01:00
33a7723fba
Merge pull request #533 from bubnikv/M221_fix
...
Fix of a regression bug, caused by pre-calculating the extrudemultiply
2018-03-07 16:03:50 +01:00
fb4230f80d
Fix of a regression bug, caused by pre-calculating the extrudemultiply
...
for precission and performance: calculate_extruder_multipliers()
has to be called after extrudemultiply is changed from the printer panel.
2018-03-07 15:46:46 +01:00
e3967e444b
SafetyTimer disabled
...
Watchdog disabled
watchdog.cpp and watchdog.h source code removed (using directly <avr/wdt.h>)
2018-03-07 14:13:34 +01:00
b7df176a46
Preserve position in menu Live adjust Z.
2018-03-06 22:45:47 +01:00
ed0e7a8b58
Preserve position in menu move axis.
2018-03-06 21:27:06 +01:00
020269a83c
Fix unable to go back from main menu to status screen.
2018-03-06 21:26:14 +01:00
e551ed1f6e
Replace lcd_goto_menu(...) by menu_action_back() in lcd_menu_fails_stats();
2018-03-06 19:51:13 +01:00
235803bc2a
Move encoder stack to separate class MenuStack. Add menu record to MenuStack.
...
It was needed to add menuFunc_t menu to stack, as in some places in menu, it is impossible to hardcode parent menu. Example: lcd_babystep_z can be invoked both from main_menu() and settings_menu() depending on printer status.
2018-03-06 19:47:27 +01:00
Robert Pelnar
PavelSindler
3d-gussner
PavelSindler
Marek Bel
Roman Beránek
Christoph Stahl
tarikku
MRprusa3d
MRprusa3d
mkbel
bubnikv