c83646743f
Deduplicate MMU settings
...
Flash: -58B
SRAM: 0B
2023-04-24 11:56:53 +02:00
4a2a89cb74
Remove stupid comments from older bad code
2023-04-24 11:56:53 +02:00
67f0fe0fce
Remove AUTOTEMP menu items
...
They are commented out and broken anyway
2023-04-24 11:56:53 +02:00
5b7266fdf1
Don't render message when printer is idle
...
Guard the lcd_display_message_fullscreen_P call by blocks_queued(). If there are no planned moves, there is no need to render this message, it creates a weird LCD draw noticable by the user.
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-04-23 12:25:10 +02:00
9de2cbfe8e
Fix an issue with crash_mode_switch toggling
...
Proposed changes
2023-04-23 12:25:10 +02:00
9272545deb
Dead code cleanup
2023-04-23 12:25:10 +02:00
02a0f6a35a
Correctly utilize the menu stack in the Mode select message
...
Flash: -34B
SRAM: 0B
2023-04-23 12:25:10 +02:00
6390b3b69b
Remove duplicate separator string
...
Flash: -14B
SRAM: 0B
2023-04-23 12:25:10 +02:00
ee8b95b556
Merge pull request #4158 from gudnimg/remove-dead-code-gudni-e1e2
...
Cleanup: remove unused extruder macros
2023-04-23 09:26:26 +02:00
9662bb11d4
Merge pull request #4144 from gudnimg/double-feedback-bugs
...
Double feedback bugs
2023-04-23 09:14:01 +02:00
3509791943
Drop sound feedback in lcd_v2_calibration
...
Drop the sound feedback in lcd_v2_calibration
when switching to lcd_generic_preheat_menu
If a single filament setup (no MMU) has filament loaded, it will jump
immediately to lcd_generic_preheat_menu
this created double feedback.
Let's just drop the feedback since the transition
between menus is very fast.
Change in memory:
Flash: -8 bytes
2023-04-22 15:28:27 +00:00
fcabcd2804
Remove TEMP_SENSOR_1 and TEMP_SENSOR_2
...
Hopefully I didn't miss anything
2023-04-22 15:15:21 +00:00
4935191335
Cleanup remove unused macros
...
enable_e1
enable_e2
disable_e1
disable_e2
The firmware doesn't support multiple extruders
No change in memory
2023-04-22 15:15:21 +00:00
51da6065c8
Merge pull request #4159 from gudnimg/cleanup-gudni-comments
...
Remove random `//-//` comments
2023-04-22 13:53:13 +00:00
b8f8348e77
Fix double feedback in Z-offset menu
2023-04-22 15:53:06 +02:00
b6e228d5a5
Fix double feedback in First Layer Calibration
...
For MMU users: This happens when the user
selects a filament to load from 1 to 5
For non-MMU: this happens when clicking
the knob within 2 seconds.
Additionally fixed the code indendation
it was a mix of spaces and tabs
2023-04-22 15:53:06 +02:00
ccabf1fa31
Remove random //-// comments
2023-04-22 13:39:08 +00:00
e516d8a0c4
Merge pull request #4156 from leptun/lcd_status_screen_block
...
Fix `M0` click not consumed
2023-04-22 15:01:16 +02:00
360f234b98
Merge pull request #4146 from gudnimg/fan-check-opt
...
Reduce code size in fan check selftest
2023-04-21 14:24:04 +02:00
91b913e997
Fix `M0` click not consumed
...
Fix the need to click the knob twice to dismiss `M0`.
Flash: -54B
SRAM: -2B
2023-04-21 12:59:40 +02:00
2ad916a2c3
Fix manual fan check menu
...
lcd_encoder was not being updated
we need to call manage_inactivity
Tested on MK3S+
Change in memory:
Flash: +6 bytes
SRAM: 0 bytes
2023-04-19 15:41:36 +00:00
18c389543b
Fix lcd_update() FW crashes
...
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-04-19 15:41:36 +00:00
2dcaae80d5
Merge pull request #4027 from gudnimg/minor-optimisation-gudni
...
Many minor optimisations for 3.13/3.14
2023-04-17 21:27:48 +02:00
f6135f2ed1
Enable Analog IR sensor again
2023-04-16 13:58:18 +00:00
9b6e1babcb
many more lcd_putc_at optimisations
...
Changes in
lcd_implementation_drawmenu_sdfile
and
lcd_implementation_drawmenu_sddirectory
seem to save the most.
Change in memory:
Flash: -72 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
9f66eceb29
optimisation: belt test new values
...
use lcd_print instead of lcd_printf_P
to print the number only
Tested on MK3S+
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
87e40f1cee
optimisation: lcd_putc_at in belt test
...
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
583c46a63f
Simplify two fan_check_error checks
...
There are only 3 possible values. No need to check for two of them
to rule of the last value. Instead simply check for the last value only.
Change in memory:
Flash: -16 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
00ffab8f62
optimisation: combine if statements in Sensors menu
...
FINDA status is always 0 or 1
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
69b4696114
use lcd_puts_P instead of lcd_printf_P
...
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
66bb9bcfe4
optimisation: lcd_temp_cal_show_result
...
result is boolean so always update the EEPROM
Change in memory:
Flash: -20 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
bd796a2cb3
optimisation: more lcd_putc_at
...
Change in memory:
Flash: -18 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
6e02a082e2
cleanup: make heating_status_counter static
...
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
ab934f8ba5
optimisation: make clock_interval static and 1 byte
...
Change in memory:
Flash: -16 bytes
SRAM: -1 byte
2023-04-15 13:45:09 +00:00
66e629ba74
cleanup: remove unused variable FSensorStateMenu
2023-04-15 13:45:09 +00:00
3cd97a5e8f
optimsation: draw cursor and set position with one function
...
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-15 13:45:08 +00:00
3dda8b5c00
optimise fan check selftest code
...
Tested on MK3S+
Change in memory:
Flash: -174 bytes
SRAM: 0 bytes
2023-04-15 11:11:16 +00:00
d6c81dab62
Fix manual fan check menu
...
lcd_encoder was not being updated
we need to call manage_inactivity
Tested on MK3S+
Change in memory:
Flash: +6 bytes
SRAM: 0 bytes
2023-04-15 10:59:58 +00:00
95acdba5fa
Fix lcd_update() FW crashes
...
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-04-14 21:31:12 +00:00
82343184e7
Merge pull request #4036 from gudnimg/optimise-mmu-silent-mode
...
optimisation: MMU silent mode toggling & init
2023-04-13 10:54:21 +02:00
193bce7f20
Merge pull request #4037 from gudnimg/optimisation-tmc2130-stuff
...
Optimisation: Disable M351 when using TMC2130 and code related to it
2023-04-13 10:54:08 +02:00
3b9d1b8980
Merge pull request #4138 from gudnimg/menu-fixes-gudni
...
Fix broken editing menu
2023-04-13 10:16:19 +02:00
c16e7733e9
Merge pull request #4141 from gudnimg/double-feedback-xyz-cal-menu
...
menu: Fix an issue with feedback double triggering in XYZ cal menu on knob click
2023-04-12 21:29:24 +02:00
225999b79d
Remove redundant colon characters
...
The Edit menu already applies a colon to the label string
no need to render it twice.
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-12 17:37:57 +00:00
2fc810289a
Fix an issue with feedback double triggering in XYZ cal menu
...
The feedback is produced due to the user clicking the knob
the menu_goto call should therefore not trigger additional feedback when
switching between menus.
No change in memory
2023-04-12 16:46:33 +00:00
d688f6ec6f
Menu item code: optimize return
2023-04-10 15:29:58 +02:00
b735c3d040
optimisation: extract common code into SETTINGS_FANS_CHECK
...
Implement it as a function instead of preprocessor macro
this allows us to control inlining
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2023-04-10 13:24:39 +02:00
d3d201730e
Do not return early if the menu item is clicked
...
Just let the menu draw till the end even if an item is clicked. The worst this can do is waste some clock cycles
flash: -1222B
ram: 0B
2023-04-10 13:02:22 +02:00
902780a929
Disable M351 when using TMC2130 and code related to it
...
Change in memory (MK3S+ multilang build)
Flash: -250 bytes
SRAM: 0 bytes
2023-04-07 21:07:26 +02:00
49096f14c3
SD menu do not consume click in _scrolling state
2023-04-07 09:11:49 +02:00
Alex Voinea
Guðni Már Gilbert
3d-gussner