ca55cf74e2
Merge remote-tracking branch 'upstream/MK3' into MK3
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2017-12-13 22:58:34 +01:00
c1416cbb33
Merge pull request #312 from PavelSindler/wizard
...
Wizard: force high power mode during xyz cal. and selftest; wizard for assembled printer
2017-12-12 20:24:15 +01:00
82dffb688a
force high power mode during xyz cal. and selftest
2017-12-12 20:21:09 +01:00
997c8de161
shipping prep. reset sets wizard flag, shipping prep wizard improvements
2017-12-12 19:17:37 +01:00
f8e3c76315
merging new changes from upstream/MK3
2017-12-12 17:14:48 +01:00
a724c2664c
menus updated, set lcd_commands_step = 0;
2017-12-12 14:25:13 +01:00
9ef5570fa3
menus accessable during first layer calibration updated
2017-12-12 13:41:31 +01:00
d29a95bd65
if first layer calibration is active set SD_PRINTING to true
2017-12-12 11:41:54 +01:00
7204e91ec6
Filament sensor not responding - (PFW-41)
...
build number = 130
2017-12-11 18:17:25 +01:00
124a3e6da8
Stealth mode limits + END_FILE_SECTION=10000
2017-12-11 16:17:36 +01:00
20de899d25
Merge branch 'MK3' into sort_files
2017-12-11 11:50:47 +01:00
13a17f9fd4
dont sort files when changing sort type in settings menu
2017-12-11 11:45:20 +01:00
1c61f2f29c
First working version
2017-12-11 11:30:49 +01:00
b76758b7b6
Ram status - heap and stack monitor.
2017-12-10 23:45:46 +01:00
e8b2043d03
Stack monitor in stepper ISR
2017-12-10 20:38:09 +01:00
26135ea227
all sd sort files: initial version; sorting type switch not added to SD card menu itself
2017-12-10 11:08:50 +01:00
82f5a79527
bug fix (cannot compile) - ultralcd.cpp - conversion from (const char*)
2017-12-08 19:22:02 +01:00
868aacc7d5
turn on second serial line from settings menu
2017-12-08 16:56:06 +01:00
d0b6b19373
save filename to eeprom first, then check if file is complete
2017-12-07 17:16:23 +01:00
2cbd1f7894
fix: added saving filename to eeprom which was removed by accident
2017-12-06 18:13:54 +01:00
44218a1b53
incomplete file check ported from MK2: initial version
2017-12-06 14:55:53 +01:00
a56b0ccaf8
bugfix - Filament sensor enable from menu
2017-11-29 00:15:45 +01:00
1863819e39
pat9125 reinit when fsensor enabled from menu.
2017-11-28 22:44:58 +01:00
ddc8587bbd
Merge pull request #112 from PavelSindler/menu_corrections
...
Menu corrections, translation to Czech language
2017-11-27 18:00:31 +01:00
ce3f14e1c0
tune menu updated
2017-11-27 17:55:32 +01:00
67a2e0a706
settings menu updated
2017-11-27 17:01:01 +01:00
f075711e64
corrected menus
2017-11-27 16:37:46 +01:00
7c6d63ffb5
pla preheat temp. changed, temp calibration on/off moved to settings menu
2017-11-27 16:21:54 +01:00
044ed951cb
translations to czech language and menu corrections: initial version
2017-11-27 16:06:34 +01:00
25c16cc835
Extrudser info, merge upstream (powerpanic fix)
...
build number = 114
2017-11-27 07:44:12 +01:00
60930beb52
Merge pull request #108 from PavelSindler/power_panic
...
Power panic works with folders
2017-11-27 07:27:17 +01:00
d9f44eb16b
unused code commented
2017-11-27 06:36:41 +01:00
bd59e11660
removed serial print
2017-11-27 06:22:32 +01:00
42b533b5d8
first working version
2017-11-27 06:20:51 +01:00
3b892e16d8
Merge branch 'MK3' into MK3
2017-11-27 04:49:23 +01:00
4dae6f871e
Sg load meassurement durring self test - 'Belt status'
2017-11-27 04:46:58 +01:00
5a77113fb5
init
2017-11-27 01:59:47 +01:00
24195557ea
removed redundant line
2017-11-27 01:24:58 +01:00
a7b40d43e3
timeouting to status in the end of first layer cal.
2017-11-27 01:23:11 +01:00
7de187d813
if user dont confirm live adjust Z by pressing the knob, save last live adjust value to eeprom
2017-11-27 00:17:45 +01:00
05348a33db
wizard: dont update lcd when loading filament
2017-11-24 22:55:47 +01:00
4b644a58ae
block of gcodes changed to avoid full buffer during v2 cal.
2017-11-23 18:22:00 +01:00
79c221d6c0
Merge pull request #97 from PavelSindler/wizard
...
show live adjust Z option in main menu during First layer cal.
2017-11-23 15:59:03 +01:00
2170c1bbe7
timeout to status prolonged, no timeout allowed when MSG_WIZARD_RERUN
2017-11-23 15:46:10 +01:00
7d825de214
show live adjust Z option in main menu when running First layer calibration
2017-11-22 11:18:39 +01:00
ee9936fa6c
Merge pull request #95 from PavelSindler/selftest_fix
...
selftest for axis modified to overcome collision between cables and PSU cover
2017-11-22 02:58:46 +01:00
e661020ada
selftest for x_axis modified little bit to overcome problems with cables and PSU cover colision
2017-11-21 18:46:13 +01:00
1ca48fee49
PID calibration temp runaway
2017-11-21 15:11:15 +01:00
afb85865b6
Merge branch 'MK3' into wizard
2017-11-16 20:54:07 +01:00
279ea79bf6
Merge pull request #86 from PavelSindler/keepalive_messages
...
host keep alive messages
2017-11-16 20:53:09 +01:00
Robert Pelnar
PavelSindler
PavelSindler