caca7bb9b8
Version changed (3.10.1 build 4697)
2021-12-16 12:14:02 +01:00
fd6dbba06f
Merge branch 'MK3_3.10.1' into PFW-1271_PF-buildv20
2021-08-02 08:51:51 +02:00
4580b8a78c
Version changed (3.10.1 build 4587)
2021-07-16 07:37:11 +02:00
36f2b5375f
Merge remote-tracking branch 'upstream/MK3' into PFW-1271_PF-buildv20
...
merge latest changes and fix isses
2021-06-24 05:53:43 +02:00
88074ac6c8
Remove FW version parsing
...
as it can be done at compile time. Code size dropped by >800 bytes.
2021-06-22 08:49:52 +02:00
56889bae13
Update PF-build.sh to work after @DRracer Remove FW version parsing PR
2021-06-17 19:08:55 +02:00
04de9c0c8a
Version changed (3.10.0 build 4481)
2021-05-06 13:46:05 +02:00
8d04316497
Revert/cleanup mininum extruder height during M600
...
This change restores the minimum extruder height for filament purge
during M600 from the current 50mm back to 27mm from FW 3.9.
We do this by introducing a new option for unload_filament() to indicate
that the unload is part of an automatic swap, and in such cases avoid
raising more than absolutely necessary (this will _also_ come in handy
to avoid the extra purge in PR #2318 during M600).
A new define MIN_Z_FOR_SWAP is introduced for this purpose.
MIN_Z_FOR_UNLOAD is still used for manual lcd unload and for M702 and
hasn't been changed.
2021-04-21 19:07:58 +02:00
c43688a549
Version changed (3.10.0-RC2 build 4104)
2021-04-16 13:52:36 +02:00
f31189e5be
Version changed (3.10.0-RC1 build 4078)
2021-03-17 12:30:54 +01:00
4728bf2182
Merge pull request #2875 from wavexx/raise_while_preheating
...
Raise Z while preheating when auto/[un]loading the filament
2021-01-11 07:45:54 +01:00
603d704178
Version changed (3.9.3 build 3556)
2021-01-07 12:50:58 +01:00
7e02a7f118
Version changed (3.9.3-RC1 build 3555)
2020-12-26 15:45:34 +01:00
396ee0fde2
Version changed (3.9.2 build 3524)
2020-11-10 10:27:18 +01:00
e28159122f
Make MIN_Z_FOR_LOAD/UNLOAD the same
...
When unloading + preheat immediately followed by a load, the carriage is
raised first up to 20mm, then again to 50mm.
With PR #2318 it makes sense to make more space for the extra extrusion
anyway, so make them the same. This moves the carriage only once _while_
preheating, which is nice.
2020-10-29 15:30:16 +01:00
7278458316
Version changed (3.9.1 build 3518)
2020-09-18 16:59:22 +02:00
02891f6bb8
Version changed (3.9.1-RC1 build 3512)
2020-09-02 11:56:53 +02:00
2447dbc69f
Version changed (3.9.0 build 3421) - sync
2020-05-18 16:56:32 +02:00
285088a715
Version changed (3.9.0 build 3421)
2020-05-18 16:45:18 +02:00
7be713199d
Version changed (3.9.0-RC3 build 3401)
2020-04-28 12:06:13 +02:00
40c052f482
Version changed (3.9.0-RC2 build 3398)
2020-04-24 20:02:13 +02:00
2e18a48b87
Version changed (3.9.0-RC1 build 3272)
2020-02-17 16:47:56 +01:00
4b85664b27
Raise default extruder jerk to 4.5
...
This should be the new default for LA1.5 for direct drive printers and
newer PrusaSlicer profiles too (hopefully).
2020-02-03 15:42:27 +01:00
95a2ad533d
Version changed (3.9.0 build 3175)
2020-01-16 16:03:34 +01:00
42d70f3dea
Merge pull request #1768 from wavexx/unknown_z_improvements
...
"Unknown z" improvements
2019-11-08 14:52:56 +01:00
023ce01f9d
Version 3.8.1 final.
2019-10-24 16:12:46 +02:00
50231b76da
Improved handling of unknown Z position
...
- Introduce raise_z_above to move Z carefully when the current position
is potentially unknown, using stallguard
- Use raise_z_above for:
* filament loading/unloading clearance
* extruder spacing when preheating (to avoid buildplate marks on PEI)
* before homing to avoid damaging the build plate and to avoid
repeated Z moves as well
Since raise_z_above is conditional, it will only raise when needed.
Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
2019-10-22 15:49:10 +02:00
0dde5e3167
Increase version.
2019-10-03 17:37:22 +02:00
4fc4cf9c11
Increase version and commit number.
2019-10-03 17:30:14 +02:00
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu
...
Unify preheat menu, add ASA material
2019-09-12 14:25:38 +02:00
898e85e69f
Merge pull request #2038 from Eriobis/MK3
...
Add a threshold distance to Z calibration
2019-09-10 16:20:24 +02:00
28c1486df2
Update Configuration.h
2019-09-09 02:14:10 +02:00
eec8e5f8c0
Version changed (3.8.0 build 2684)
2019-09-06 19:47:05 +02:00
3f04c4db87
Merge branch 'MK3' into preheat_menu
2019-08-27 22:20:23 +02:00
269aef1696
Remove unused code guarded by WATCH_TEMP_PERIOD macro as most of the functionality is duplicate to what is implemented in temp_runaway_check(). This will release us from porting setWatch() to unified preheat menu and maintaining it.
2019-08-27 20:05:10 +02:00
c27fcf9cff
Increase version to 3.8.0-RC2 and build number to 2639.
2019-08-26 17:03:18 +02:00
2ddbd606f2
Version changed (3.8.0 build 2608)
2019-08-08 16:44:16 +02:00
0422713b29
Merge pull request #2005 from prusa3d/MK3_3.7.2
...
Mk3 3.7.2
2019-07-16 08:50:38 +02:00
98bae7af9f
Merge branch 'MK3' into PFW-873
2019-07-10 16:50:14 +02:00
8229a45187
pre-production version ;-)
2019-07-09 12:16:51 +02:00
a3a7f3106e
print parameters checking
2019-07-03 17:21:11 +02:00
a59e7090ea
Increase version.
2019-06-27 17:32:40 +02:00
fee67d9451
Increase version.
2019-06-13 16:37:51 +02:00
e93f043fee
Increase version 3.7.1 final.
2019-05-13 15:09:58 +02:00
85806a0f38
variable bed pwm frequency fix (input value is 7bit, not 8bit)
2019-05-07 15:35:34 +02:00
58683da2fb
Variable bed PWM resolution/frequency (adjusted to 5bits/32Hz)
2019-05-06 18:07:42 +02:00
a8d8d9e4c9
version change
2019-04-01 20:52:24 +02:00
e37c2e0b2e
version change
2019-03-15 20:01:02 +01:00
7c5e9500a8
version change
2019-03-15 20:00:07 +01:00
f0cc313fed
debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified
2019-03-06 19:56:48 +01:00
D.R.racer
DRracer
3d-gussner
Yuri D'Elia
Marek Bel
MRprusa3d
Marek Běl
MRprusa3d
Robert Pelnar
PavelSindler