75fac9dab2
Do not kill printer if External SPI flash W25X20CL is not responding.
...
Remove internationalization macro for this message. It has no sense to be translated as internationalization in most cases doesn't work if it is not responding.
Show this message instead of splash screen if the error is encountered.
There is no additional delay or wait for click, as such functions doesn't work in setup function.
2019-04-16 22:20:53 +02:00
84cabd3836
Change busy_state type, save 340B of flash
2019-04-05 15:20:34 +02:00
bf57a59147
Extract duplicate code into function. Saves 106B flash.
2019-04-05 15:12:35 +02:00
bf1a55ab02
Add mmu_continue_loading blocking variant and use it for usb printing, so that "ok" is not returned to the controller in case MMU load failed.
...
Known limitation: MMU load failed is not handled properly if it happens again after user clicked printer button to continue print.
2019-04-04 18:15:37 +02:00
d22793f276
Z-probe nr. states reduced to 1; 3; 5
2019-03-28 12:02:46 +01:00
e7900aeaa1
Merge remote-tracking branch 'upstream/MK3' into 7x7_polishing
2019-03-28 08:08:54 +01:00
e259967991
remove / comment debug code
2019-03-27 20:41:45 +01:00
a9ce38df71
Function for decision if we have valid Z-calibration data in eeprom fixed, mesh bed leveling: possible crash fix, temporaty debug info on serial line.
2019-03-26 17:14:05 +01:00
576bfb17c7
whitespace
2019-03-21 18:51:54 +01:00
175f840d16
return statement not used (fixes Pronterface issues)
2019-03-21 18:46:07 +01:00
4100bd33a7
Fix Dcodes compilation errors and warnings.
2019-03-19 13:53:58 +01:00
6e26f61726
fixed 7x7 mesh bed leveling vs. Z calibration check
2019-03-14 14:48:01 +01:00
9e0e4198c5
Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update
2019-03-14 01:52:44 +01:00
72f51989fa
compare measured Z-value during mesh bed leveling with Z-calibration value even for 7x7 mesh
2019-03-13 19:41:09 +01:00
b20d9171b6
Merge remote-tracking branch 'upstream/MK3' into 7x7
2019-03-12 11:47:17 +01:00
42036270cf
Merge pull request #1619 from MRprusa3d/PFW-795d
...
better autoLoad II
2019-03-12 11:44:30 +01:00
c9cff11732
Merge pull request #1593 from MRprusa3d/PFW-647
...
mode switching, G-code unification
2019-03-12 11:40:43 +01:00
4d2b155ff9
Merge pull request #1594 from mkbel/fix_change_filament
...
Fix change filament
2019-03-12 11:39:15 +01:00
9a83925a97
fixed bug in counting approximate Z coordinate
2019-03-11 23:13:55 +01:00
3388444b6c
better autoLoad II
...
autoLoad inhibit if Support::ExtruderInfo(@MKx)/SensorInfo(@MKxS)-menu is selected
2019-03-11 20:43:07 +01:00
141b78c048
number of Z-probes defualt value changed from 4 to 3, mmu stealth mode switch in settings menu
2019-03-10 16:03:46 +01:00
952e0e1e77
change min. nProbeRetry to 1
2019-03-08 19:49:10 +01:00
6a864ffbab
G80 parameters configurable via settings menu
2019-03-08 15:43:37 +01:00
98bb2b7acf
merge debug gcodes for bed analysis
2019-03-06 20:45:23 +01:00
dccb6ca2c6
Merge remote-tracking branch 'upstream/MK3' into bed_analysis_gcodes2
2019-03-06 19:56:52 +01:00
f0cc313fed
debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified
2019-03-06 19:56:48 +01:00
5766a5537e
limit number of probes
2019-03-05 22:43:44 +01:00
7c187541e1
function for valid points determination improved; simple Z-coordinate estimation; measure all points and use inaccurate Z-coordinate in case that we don't have enought information for counting Z-coordinate estimation
2019-03-05 22:36:30 +01:00
d9e93e8a77
measurements points moved 10mm to the left; measure only chosen points (e.g. not points affected by magnets proximity)
2019-03-05 20:40:08 +01:00
7bcd54f8ba
Add missing function prototype.
2019-03-05 17:30:27 +01:00
ebfd4b2f47
Fix compiler warning: unused parameter 'calib'
2019-03-05 17:02:57 +01:00
790ae9f0ce
Fix compiler warning: unused parameter 'pstep'.
2019-03-05 16:41:41 +01:00
20a03d703d
G-code unification
...
"FSENSOR_RECOVER" ->-> "PRUSA fsensor_recover"
2019-03-05 13:36:13 +01:00
f161d3ade4
Change formatting.
2019-03-04 22:17:43 +01:00
b2255c8be9
Preheat nozzle before loading filament in M600 (change filament) gcode.
...
This fixes problem of not heating the nozzle when retrying load after MMU load failed.
2019-03-04 22:00:24 +01:00
17f095b957
shorter Z movements (makes calibration faster)
2019-03-04 20:32:56 +01:00
9dde8c4732
Merge pull request #1591 from MRprusa3d/PFW-795c
...
better autoLoad
2019-03-04 15:31:04 +01:00
b02ca18c93
better autoLoad
...
autoLoad inhibit if Support::ExtruderInfo-menu is selected
2019-03-04 12:52:35 +01:00
85c208f9f4
Merge branch 'MK3' into bad_load_cut
2019-03-01 14:55:55 +01:00
250a448d05
Merge pull request #1549 from mionut/7MBL
...
7x7 mesh bed leveling with power failure save + pinda temperature filter
2019-03-01 14:19:52 +01:00
e27fdafcec
menu switch - initial
2019-02-28 19:42:09 +01:00
482f8ef01a
Merge remote-tracking branch 'mionut/7MBL' into 7x7
2019-02-28 15:54:49 +01:00
02a692c5d9
Store cutter enable state in EEPROM.
2019-02-27 17:34:03 +01:00
4a4eb9962c
Cut filament when cutter is enabled and MMU load fails.
2019-02-27 10:42:26 +01:00
ff35119ef3
preHeat @ filament management
...
another funcionality III / autoLoad
2019-02-26 17:33:37 +01:00
be0ed46335
preHeat @ filament management
...
another funcionality III
2019-02-22 03:09:50 +01:00
da0867cfc5
preHeat @ filament management
...
another funcionality
2019-02-20 03:01:33 +01:00
afc86a1363
missing ;
2019-02-18 05:50:29 +02:00
11d19879fc
Merge pull request #1533 from MRprusa3d/PFW-210
...
preHeat @ filament load / unload / autoLoad / MMU
2019-02-15 17:45:38 +01:00
4835b9b220
7x7 points mesh bed leveling
2019-02-14 10:57:58 +02:00
Marek Bel
PavelSindler
PavelSindler
MRprusa3d
Laurentiu