d275fe0e83
Extract gcode filter from SdBaseFile into SdFile + optimization
...
- Start saving instructions as the whole PR was >1KB long.
- It turned out the compiler was unable to understand the core skipping
cycle and an ASM version had to be used.
- Add seekSet aware of the G-code filter
2021-01-27 09:33:28 +01:00
c3758d350e
Fast skipping of large comment blocks
...
This is an extension/optimization of PR #2956 .
It uses the cached 512B block buffer to avoid heavy-weight read() in SdBaseFile.
Even though this principle allowed the AVR to skip ~600KB of data within ~5 seconds,
the impact on code base is huge, especially into well proven and long-term stable
parts like reading a file from the SD card.
The sole purpose of this PR is to show/verify the possibility of the AVR CPU
in relation to adding thumbnails into MK3 G-codes.
Moreover, this PR shall not be merged unless the missing/commented features
are restored - especially file seeking and M84 search.
PFW-1175
2021-01-27 07:03:51 +01:00
c28e5a9dbc
Farmer's request 2
...
Farmers request having the Change filament menu item always visible in
the main menu and located after the Live Adjust Z (which disappears
after the first few printed layers).
2021-01-26 12:19:41 +01:00
bfe93d3959
Merge pull request #2951 from DRracer/pvb-08
...
Add PVB preheat and 0.8mm nozzle presets
2021-01-26 12:09:41 +01:00
ba8386573a
Remove duplicate string `Resume print` using `MSG_RESUME_PRINT`
2021-01-26 09:23:55 +01:00
c6a01b3806
Remove duplicate string `Reset` using `MSG_RESET`
2021-01-26 09:15:46 +01:00
ab5aad636f
Remove duplicate string `Mesh Bed Leveling` and `Mesh bed leveling` using `MSG_MESH_BED_LEVELING`
...
Fixed few too long translations
2021-01-26 09:05:38 +01:00
bce8501eea
Remove duplicate string `Extruder` using `MSG_Extruder`
2021-01-26 08:31:21 +01:00
530b9f50b8
Remove duplicate string `Eject filament` using `MSG_EJECT_FILAMENT`
...
Fix few translations
2021-01-26 08:22:08 +01:00
269fabc330
Remove duplicate string `Cut filament` using `MSG_CUT_FILAMENT`
2021-01-26 07:15:46 +01:00
797d8e74a3
Remove duplicate string `Checking X axis` and `Checking Y axis` using `MSG_CHECKING_X` and `MSG_CHECKING_Y`
2021-01-26 07:10:57 +01:00
2d1e1e4cee
Remove duplicate string `Fans check` using `MSG_FANS_CHECK`
2021-01-25 20:13:12 +01:00
d117a299f7
Remove duplicate string `Fil. runouts ` using `MSG_FIL_RUNOUTS`
2021-01-25 20:04:18 +01:00
10bbd64b41
Remove duplicate string `Crash` using `MSG_CRASH`
...
Better Italian translation, thanks to @wavexx
Fix Polish translation as it was too long for the menue and caused LCD issues.
2021-01-25 18:53:53 +01:00
4878db7365
Remove duplicate string `Last print failures` using `MSG_LAST_PRINT_FAILURES`
...
Fix too long translations in Spanish and Italian for this message
2021-01-25 18:38:35 +01:00
99867c8fbd
Remove duplicate string `Total failures` using `MSG_TOTAL_FAILURES`
2021-01-25 18:06:47 +01:00
8f0a45e8a4
Remove duplicate string `Steel sheets` and `Total` using `MSG_STEEL_SHEETS` and `MSG_TOTAL`
2021-01-25 17:58:51 +01:00
7222cf05cf
Remove duplicate string `MMU Fails` and `MMU Load Fails` using `MSG_MMU_FAILS` and `MSG_MMU_LOAD_FAILS`
2021-01-25 17:38:36 +01:00
fbb3fad64b
Remove duplicate string `Last print` using `MSG_LAST_PRINT`
2021-01-25 16:54:26 +01:00
7891d12a32
Remove duplicate string `Is filament loaded?` using `MSG_FILAMENT_LOADED`
2021-01-25 16:44:55 +01:00
223f32deae
Remove duplicate string `HW Setup" using `MSG_HW_SETUP`
2021-01-25 16:15:57 +01:00
5c1da227fe
Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize
2021-01-25 16:00:46 +01:00
377a59c624
Remove duplicate string `Belt status`
2021-01-25 15:53:31 +01:00
d8917a304a
Reuse lcd_space() instead of in-place printing of spaces in a cycle
...
Saves another ~40B
2021-01-25 15:21:25 +01:00
783e4bbaf9
Add lcd_putc_at (code down >150B), refactor lcd_selftest_screen_step
...
(RAM down 10B)
2021-01-25 14:58:57 +01:00
3975415490
Merge branch 'MK3' into codesize
2021-01-25 12:43:30 +01:00
58351fb27a
Merge pull request #2977 from DRracer/farm-patch1
...
Farmers' requests
2021-01-25 11:15:44 +01:00
514321f2ce
Remove farm_no completely + reuse prusa_stat_farm_number() where
...
applicable
2021-01-25 11:09:28 +01:00
c1ff6242b0
Avoid copying FW version number into RAM - use the PROGMEM string
2021-01-25 09:03:04 +01:00
9fa9d6b063
Move farm strings to PROGMEM
2021-01-25 09:48:17 +02:00
98a4da571d
Merge branch 'farm-patch1' of github.com:DRracer/Prusa-Firmware into farm-patch1
2021-01-25 08:39:20 +01:00
9bfada94f0
Remove commented code
2021-01-25 08:38:44 +01:00
31a6270f69
Abuse \n in lcd printing instead of constantly calling other functions
...
"other functions" being lcd_set_cursor and lcd_print(char). Saves 100B of flash
2021-01-22 20:12:11 +02:00
4d3f056b81
Fix factory reset menu rendering
2021-01-22 20:07:27 +02:00
37c431abd9
another lcd_puts_at_P
2021-01-22 19:44:46 +02:00
3ccd1b2b2b
Refactor lcd_set_cursor + lcd_puts_P -> lcd_puts_at_P
...
saves considerable amount of flash
2021-01-22 18:34:47 +01:00
da21916473
Change printf_P without format arguments and NL to puts_P only
2021-01-22 18:56:05 +02:00
9b34789398
Cleanup reset_menu()
2021-01-22 17:54:44 +01:00
c710253cca
Code cleanup and size reduction and RAM optimization
...
Replase single character strings with single characters when calling
lcd_print
2021-01-22 17:11:51 +01:00
9b847715ac
Rename F0 to FRM on the status screen
2021-01-19 13:11:25 +02:00
3f5cfc4e61
Move the change filament button to the main menu when farm printing
...
PFW-945
2021-01-19 13:06:23 +02:00
a9d8ddc89c
Farmers' requests 1
...
- remove the UI and related stuff to setting a farm number (the
communication protocol must remain intact)
- remove confirmation after print finished ("Print OK")
Both requests are highly welcome, since they allow for lowering the code
size by >1KB
PFW-963, PFW-927
2021-01-19 09:58:02 +01:00
4728bf2182
Merge pull request #2875 from wavexx/raise_while_preheating
...
Raise Z while preheating when auto/[un]loading the filament
2021-01-11 07:45:54 +01:00
ef51652e39
Merge pull request #1758 from wavexx/disable_filament_checks_in_extr_menu
...
Disable filament checks inside the Move -> Extruder menu
2021-01-11 07:42:25 +01:00
8a083c9970
Add PVB preheat and 0.8mm nozzle presets
...
minor features reflecting the latest announcement
Needs some 300B of CPU flash though, after 3.9.3 we need to optimize code
size again.
2021-01-08 13:52:39 +01:00
5c3513a6cc
Merge pull request #2397 from odaki/flashair_display_ip
...
Show the FlashAir IP address
2021-01-08 12:20:12 +01:00
0ed6b537a8
Merge branch 'MK3' into MK3_3.9.3
2021-01-07 13:27:51 +01:00
76eb743139
Set default SuperPINDA toggle on MK2.5/S to NO
2020-12-23 20:59:33 +01:00
4b510fef0a
Add PINDA_TEMP_COMP variable to enable SuperPINDA toggle menu/function
2020-12-23 20:59:08 +01:00
732b6e0cad
Cleanup
2020-12-23 20:58:20 +01:00
D.R.racer
DRracer
3d-gussner
Voinea Dragos