844c429c6d
changed fw version
2017-05-19 14:15:46 +02:00
bb3887fe1b
calibration status and pinda probe calibration status were split
2017-05-12 11:18:01 +02:00
134a50f5b3
messages updated, different bowden lengths for SNMM used, M600 for SNMM updated, stop print for SNMM updated, load all filaments added
2017-05-05 01:29:59 +02:00
2fa97d5dfe
Added messages in czech and english for SNMM, service menu for adjusting bowden lengths; updated service menu to be extendable; M600: loading filament for SNMM updated; unload all filaments updated
2017-05-02 19:21:52 +02:00
f28252f563
changed version number
2017-04-28 11:45:32 +02:00
7ec45271c2
timeout to status, better print time counting when using pause print
2017-04-21 16:29:04 +02:00
fc221fbea5
Merged PINDA temp calibration branch into MK2
2017-04-10 11:10:03 +02:00
fab71ff7cf
information that temp calibration active is active is stored to eeprom
2017-04-06 19:56:01 +02:00
7086764d35
different preheat error messages for bed and hotend
2017-04-03 15:28:03 +02:00
762167fb00
Merge remote-tracking branch 'ayourk/MK2' into MK2
2017-03-31 18:49:23 +02:00
14e4c80e7e
Merge branch 'MK2' into MK2
2017-03-23 15:05:47 +01:00
7daf6b2efd
dont use blocking encoder for button press, lcd_update(false) added to setup function
2017-03-23 14:38:18 +01:00
8c35b18ed4
Merge pull request #65 from PavelSindler/MK2
...
M304 doues not survive reboot fixed, farm mode activation fixed, xyz cal. messages fixed
2017-03-23 12:06:15 +01:00
ed5842d1d1
Rx buffer overflow behavior improved
2017-03-22 18:43:19 +01:00
3017decb9a
fixed undesirable farm mode activation after flashing new firmware
2017-03-15 14:36:58 +01:00
9411d1dcc5
Merge pull request #60 from PavelSindler/MK2
...
farm mode: printer sends farm number and status, no ping acoustic allert
2017-03-13 14:45:15 +01:00
7ad319a16a
farm mode: printer sends farm number and status, no ping acoustic allert
2017-03-13 14:40:26 +01:00
43710fc9b7
Merge pull request #57 from PavelSindler/MK2
...
farm mode ping, PRN1 sends farm number
2017-03-07 19:25:03 +01:00
608717d110
farm mode: detection if printer is connected to monitoring, PRN1 sends also farm number
2017-03-07 19:19:13 +01:00
4eb45faded
changed version, pinda probe calibration menu
2017-03-06 16:24:23 +01:00
7b4c79b4d0
Storing status for pinda probe calibration
2017-03-06 11:19:21 +01:00
de15b572cf
Merge pull request #54 from PavelSindler/MK2
...
disable farm mode confirmation, heartbeat improved, typo fixed
2017-03-03 14:39:21 +01:00
d31d73c565
changed eeprom address for temp shift, verbosity level for mesh bed leveling added, added debuging functions for temp calibration
2017-03-03 14:12:37 +01:00
5d217f419c
disable farm mode confirmation added
2017-03-01 18:27:53 +01:00
09f9162078
Merge pull request #53 from PavelSindler/MK2
...
farm mode improved
2017-03-01 15:38:12 +01:00
99c201dba2
farm mode disable from menu added, farm number value remains after activating farm mode, wider farm numbers range
2017-03-01 15:34:41 +01:00
fd3bb9c7e5
delay_keep_alive function fixed, induction probe temperature calibration
2017-03-01 11:10:29 +01:00
6d8f0d1749
Merge pull request #52 from PavelSindler/MK2
...
farm number in main menu during print
2017-02-28 12:48:29 +01:00
37e4035f42
changed version number
2017-02-28 12:46:07 +01:00
dcce1b1f5e
version number changed
2017-02-28 11:24:13 +01:00
9eb9b0c015
version number changed
2017-02-28 11:22:54 +01:00
7a896b3601
Merge pull request #50 from PavelSindler/MK2
...
Three digit farm numbers support added, status on demand added, temp reading disable in farm mode, fixed "shift out of range" bug in xyz calibration
2017-02-28 11:16:34 +01:00
c441b4acdb
temp calibration initial version
2017-02-27 17:24:26 +01:00
241e32e691
Fixed "Shift out of range" bug in xyz calibration, status on demand added, temp reading disable in farm mode
2017-02-22 18:00:41 +01:00
5a584d947a
Merge pull request #44 from PavelSindler/MK2
...
German language added, updated spanish language messages, checking if…
2017-02-14 13:35:02 +01:00
590cc8f3e8
German language added, updated spanish language messages, checking if Z live adjust is in allowed range, chcecking for invalid gcodes added, fixed bug in total print time, fixed selftest to avoid false triggering, added auto home after selftest, removed farm mode menu feature, added experimental functions for checking bed properties
2017-02-14 11:52:48 +01:00
c63b4ca18e
Merge pull request #38 from PavelSindler/MK2
...
Improved some english messages, added message at the beginning xyz calibration, dont disable steppers during M0/M1, E calibration not used
2017-02-02 16:09:33 +01:00
ebabaf527a
Added message at the beginning of xyz calibration, dont disable steppers during M0 and M1
2017-02-02 15:51:16 +01:00
2f885290e2
Merge pull request #37 from PavelSindler/MK2
...
Added flag for printer reset detection for SNMM, improved loading and unloading filament, corrected messages in Italian language, changed load filament sequence
2017-01-25 19:20:27 +01:00
047f2a8389
Added writing flag to EEPROM, that we started/finished print to detect printer reset and need for filaments adjustment.
2017-01-18 17:57:32 +01:00
649928e994
defines for max hotend and bed temperatures removed
2017-01-16 18:36:12 +01:00
bfe2f72cf8
added defines for max hotend and max bed temperature for xyz calibration
2017-01-09 14:58:05 +01:00
fcce374a14
initial version - merging from DEV multicolor
2017-01-09 13:12:39 +01:00
93400ea4e0
Fix ENCODER steps in Configuration.h
...
Add temp tables for the E3D PT100 with Amplifier in thermistortables.h
Make it easier to switch to the PT100 temperature sensor with appropriate PID values for the Extruder.
2016-12-25 02:49:34 -07:00
5169c17d2f
Version increment
2016-12-14 15:12:21 +01:00
0e7b4d3d3c
Firmware version iterated, fan selftest strings ported to all languages.
2016-10-19 09:55:56 +02:00
854b79de46
Implemented a calibration flow supporting the new & pre-built machines.
...
Fixed a thermal runaway on heat up.
Increased timeout of live adjust to 90 seconds.
2016-10-07 17:21:06 +02:00
e0bb76032c
Reset live adjust on XYZ calibration.
...
Disable timeouts in the XYZ/Z calibration.
Don't modify feed rate multiplier during the XYZ/Z calibration.
Support multi screen messages in the XYZ/Z calibration - "move the Z carriages up" step.
Support up to three lines in the XYZ/Z calibration messages.
Added a new message "Measuring reference height of calibration point xx of 9".
Changed the "move the Z carriages up" message to suggest rotating the knob.
Changed the "live adjust not set" message to reference the manual chapter and section.
Remove debugging serial line output on Z calibration.
Removed the non-working pressure advance feature.
Improved accuracy of diagonal moves by oversampling the path discretization.
Accelerated the planner by rewriting time critical routines from floating
point to fixed point arithmetics.
2016-09-01 17:05:15 +02:00
078d883416
Firmware version updated to 3.0.7
2016-08-23 10:27:29 +02:00
053c727fed
Bed MINTEMP implemented, MAXTEMP behaviour changed, loading filament bug fixed, Extruder max feedrate increased and Italian language strings fix.
2016-08-07 20:20:48 +02:00
PavelSindler
PavelSindler
Aaron Yourk
michalprusa
bubnikv
akukan