df754a322b
MK25 merge Xpila's changes
2018-02-06 08:33:26 +01:00
33aa3d5e7d
commint nr
2018-02-05 16:56:31 +01:00
36536044f4
version changed
2018-02-02 17:48:02 +01:00
8562235440
MK2.5 port - compilable version
2018-02-01 20:08:11 +01:00
9d8191323b
Merge pull request #440 from XPila/3.1.1-RC6
...
Extruder stealthChop and constant-off-time mode.
2018-01-31 20:21:02 +01:00
210b97d16d
New fail stats (global, last print), crashdetection X and Y separated
2018-01-30 13:10:36 +01:00
f4073120ef
-m Added Encoder Fix changes
2018-01-25 06:49:28 +10:00
cae68d9f6d
Extruder resolution changed to 32usteps
...
build 151
2018-01-24 01:41:42 +01:00
69f97e0ec3
Separated the "Unknown" build from the "Development" build.
...
Documented purpose of the various build types.
2018-01-22 17:41:05 +01:00
330f1576fc
Support for debug builds:
...
A build version and repository is displayed on the welcome screen,
D-codes, stack overflow check and stepper timer overflow check
are enabled in the debug mode.
2018-01-18 16:24:25 +01:00
b5f8b1d97c
Merge pull request #412 from PavelSindler/debug_version
...
initial message for debugging fw version
2018-01-18 13:18:16 +01:00
e60cb2a79e
unload filament sequence same as in M600
2018-01-17 21:54:34 +01:00
4843f2c48e
initial message not shown on release candidate versions
2018-01-17 17:38:34 +01:00
bfa675c1a4
initial message for debugging fw version
2018-01-17 16:00:19 +01:00
36e4e39c85
3.1.1-RC5 build 148
2018-01-16 19:25:09 +01:00
6b5f9253d6
build 147
2018-01-16 16:50:05 +01:00
981a681e52
Temperature ISR synchronization, M600 - faster unload
2018-01-15 17:29:07 +01:00
9aedaa8fe7
build 146
...
hard limits
fsensor overflow fix
2018-01-14 23:59:43 +01:00
552b1f03b1
build 145
...
fixed - finishstatus declaration
2018-01-13 19:16:09 +01:00
a4be2af538
commit nr updated
2018-01-11 17:51:30 +01:00
cfae8f859d
Merge branch 'MK3' into fw_versions
2018-01-11 16:58:47 +01:00
087532085f
development fw versions has initial message for warning
2018-01-11 15:50:26 +01:00
43010b30b4
Build 143f
...
Crashdetection improoved, blocking temperature ISR fixed, limits for silent mode adjusted.
2018-01-09 19:54:07 +01:00
0a2087c1cb
build 143e
...
Linear advance disabled
Max feedrate reduced to 200mm/s
Silent max accel reduced to 984mm/s^2
some debug logs removed, tmc_init - log message fixed
2018-01-04 18:08:22 +01:00
8a5ba89a9c
Missing serial characters debuging
...
disabled fan ISR
disabled fsensor ISR
disabled linear advance
build 143b
2018-01-02 20:55:33 +01:00
c6e77f55f6
checkrx in stepper returned back
...
build 143a
2017-12-30 02:55:22 +01:00
568f03c46e
build 143
2017-12-29 23:49:11 +01:00
8d1f2afbf2
build number change
...
just 141r -> 142
2017-12-29 20:22:45 +01:00
0920b62d80
build number change
2017-12-29 20:21:06 +01:00
e3c006dbe9
Serial communication uses port0 or port1, not both, removed some suspected code.
...
build 141
2017-12-29 00:06:47 +01:00
f71f133e80
power panic polished
...
Retraction set correctly to have minimum missing line
Z motor current not lowered that drascialy
Extruder motor turning off instantly
Beeping added to the end
2017-12-28 23:26:06 +01:00
f1c741d027
Filament autoloading improved and minor tweaks
...
Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading)
Autoloading now unable to turn on when filament sensor is turned off or not responding
Color not right changed to color not correct to avoid slight confusion
2017-12-28 18:59:57 +01:00
5e5588c72c
Text grooming
...
Added language mutations of error messages, menu items.
Synced wording of crash detection in messages.
rPi port -> RPi port.
Minor menu items alignment.
2017-12-28 15:45:52 +01:00
bd58718d9d
dummy "ok" response
...
build 139 (RC4)
2017-12-28 02:45:05 +01:00
546314fda7
Removed debug messages from serial comunication (octoprint...).
...
build 137b
2017-12-27 20:29:24 +01:00
23ed33fc21
disable crashdetection while usb printing
2017-12-23 03:42:19 +01:00
eba2924fdd
Remove load/unload menu when autoload enabled
2017-12-20 22:55:11 +01:00
a3a0e70eeb
Fsensor autoload enabled menu and eeprom variable
2017-12-20 22:29:41 +01:00
c88938e813
Fixed blocked lcd buttons
...
build = 137y
2017-12-20 21:33:07 +01:00
25dd6dd673
new module adc (analog2digital)
...
temperature.cpp - adc sampling state machine removed
new dcode D9 (adc read/write + simulator)
temporarily DEBUG_DISABLE_STARTMSGS because UI blocked
SILENT_MAX_FEEDRATE reduced to 172mm/s
hexfile removed
build number 137x
2017-12-20 13:42:20 +01:00
5daf53f35b
version changed
2017-12-15 11:55:37 +01:00
7304579ca5
build 135
2017-12-13 23:19:51 +01:00
240922d789
build 134
2017-12-13 16:27:35 +01:00
ae8e84a698
build 133
2017-12-13 14:44:53 +01:00
889f4e49fb
eeprom defines
2017-12-13 14:17:32 +01:00
af5241623d
version change
2017-12-13 13:14:25 +01:00
cdeb835b5d
Failstat couters initialization
...
build number = 131
2017-12-12 23:37:31 +01:00
5b314d0829
second serial active address in eeprom redefined
2017-12-12 17:18:06 +01:00
0271da3c67
Ambient thermistor - new table (PFW-71)
...
Crashdetection disable durring print (PI3M3-42)
Stealth mode - better limit values (PI3M3-5)
2017-12-12 15:44:42 +01:00
7204e91ec6
Filament sensor not responding - (PFW-41)
...
build number = 130
2017-12-11 18:17:25 +01:00
PavelSindler
Robert Pelnar
PavelSindler
TheZeroBeast
bubnikv
Michal Průša