3bf2552b6c
fixed #761 from hzapper (#elif instead of #else if)
2018-05-28 13:41:36 +02:00
28a767b460
Merge pull request #760 from PavelSindler/safety_timer_fixes
...
Safety timer not active during filament runout procedure
2018-05-28 13:28:24 +02:00
58ae70c4e1
Merge branch 'MK3' into MK3-new_lang
2018-05-28 13:22:14 +02:00
15207e4d5e
Linearity correction fix - (eeprom storage changed to byte instead of word)
...
+enabled for XYZ axes
2018-05-28 01:47:08 +02:00
2cf20c8c99
New ML support - migration - fix_source_1.sh script (replace 'MSG_xx' with '_T(MSG_xx)')
...
+ output + fixed source
2018-05-23 16:37:08 +02:00
8c9b670c76
Merge pull request #746 from MRprusa3d/MK3
...
menu returns corrections
2018-05-22 16:08:08 +02:00
137e1c5027
whitespace
2018-05-22 13:33:31 +02:00
d63a17c696
Safety timer not active during filament runout detection
2018-05-22 13:31:21 +02:00
bd587faab9
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 03:20:03 +02:00
3eb21b65ed
wizard fix: don't reset calibration status when repeating first layer cal.
2018-05-15 23:19:23 +02:00
83aa710da6
menu returns corrections
...
Settings::FilamentSensor & FilamentAutoload
removing Calibration::ShowEndStops @ MK3
2018-05-15 20:23:22 +02:00
b71a29ad96
Use ShortTimer instead of long_press_timer global variable.
2018-05-11 17:05:12 +02:00
02ecd08786
Convert Time class to template, instantiate LongTimer for longer and ShortTimer for shorter periods.
2018-05-11 16:31:42 +02:00
07a7ce1acf
Remove unused lcd_ping_allert().
2018-05-11 15:09:27 +02:00
e8730c2899
Merge branch 'MK3' into read_xyz_cal
...
# Conflicts:
# Firmware/ultralcd.cpp
2018-05-10 18:31:31 +02:00
329ea199ec
Show measured bed offset from expected position even if not homed. Remove redundant lcd_quick_feedback() calls.
2018-05-10 18:24:49 +02:00
80efafd7b9
menu returns corrections
...
Statistics
Calibration::ShowEndStops
Support::ExtruderInfo
Support::BeltStatus
Support::Temperatures
Support::Voltages
2018-05-09 00:27:32 +02:00
1d7b3ea2de
Set calibration status to calibrated also by using live adjust Z.
...
This fixes problem, that if the first layer calibration is never done, live adjusting Z during printing is not applied after printer reset. Also repeatedly using live adjust Z on uncalibrated printer leads to steadily decreasing meaningless stored live adjust Z value.
2018-05-03 22:03:38 +02:00
cd3851e175
Merge pull request #715 from MRprusa3d/MK3
...
Mk3
2018-05-03 14:54:43 +02:00
d02333918f
MaR::180501
2018-05-02 22:13:47 +02:00
72364648dd
Hot fix: Can not move X and Y axis in stealth mode, when the printer is not homed.
...
Disable endstops in move axis menu.
2018-05-02 20:50:47 +02:00
986f9fd3a6
selftest correction
2018-04-27 14:49:37 +02:00
254804cc8d
MK3 selftest: move Z axis higher before calibrating autohome
2018-04-27 09:23:56 +02:00
ab68221976
Always show XYZ cal. details menu.
2018-04-26 16:36:03 +02:00
1a80fc28e8
Add zero point offset information support menu.
...
Note: XYZ menu is shown only if not printing and printer must me homed to show non-zero value.
2018-04-26 16:36:03 +02:00
b6888470cf
Save 42 bytes of flash by removing duplicate string "--------------------".
2018-04-26 16:36:02 +02:00
c1dd269a92
Fix missing degree symbol after returning to status screen. Those lcd_set_custom_characters* calls were redundant.
2018-04-26 16:36:02 +02:00
d6aa149cfa
Conserve 58 bytes of flash by returning by reference.
2018-04-26 16:36:02 +02:00
ae08788c99
Split lcd_service_mode_show_result screens to separate functions. Make them non blocking. Remove global array distance_from_min, pass it as function return value. Make Support submenus returning to Support menu.
2018-04-26 16:36:02 +02:00
f64d266c89
Timer in autoloadmenu - dirty hack (unable to compile under 4.8.1)
2018-04-26 14:50:01 +02:00
7e462b3224
Merge branch 'MK3' into MK3
2018-04-25 19:15:36 +00:00
0b6644915a
Add files via upload
2018-04-25 18:47:19 +00:00
f207145752
Return from Autoload filament and Load filament menu item to parent menu.
...
Exception is Load filament, when temperature is sufficient to load filament, in such case, load filament is started and GUI returns to status screen.
2018-04-25 16:51:35 +02:00
010ceceff9
add another homing after steel sheet is removed; added timeout for pinda cooling; if PINDA doesn't trigger before reaching Z = -1mm, temp. calibration fails
2018-04-24 13:43:51 +02:00
043c8c66be
waiting for pinda probe cooling
2018-04-19 16:55:00 +02:00
c5af3aaaf2
Merge pull request #622 from mkbel/fix_menu_return_fail_stats
...
Fix returning from Fail stats menu.
2018-04-13 18:35:03 +02:00
6f985d23d6
Fix returning from Fail stats menu.
2018-04-13 17:20:30 +02:00
03d03aeac4
Return to main menu from filament unloading.
2018-04-13 16:51:47 +02:00
e4a4c88be9
Merge pull request #615 from PavelSindler/selftest_MK25_fix
...
selftest for MK2.5: fan error fix
2018-04-13 13:59:15 +02:00
5f3fed33cf
Merge pull request #613 from MRprusa3d/MK3
...
Add files via upload
2018-04-13 10:02:44 +02:00
591cb881cc
selftest: false fan error fix, added message in case that manual fan error fails
2018-04-12 18:24:30 +02:00
d09f190c2b
Add files via upload
2018-04-11 18:48:50 +00:00
e150d502ac
removed configuration_prusa
2018-04-11 18:49:42 +02:00
53d903e600
Merge pull request #610 from MRprusa3d/MK3
...
Add files via upload
2018-04-11 18:46:18 +02:00
52de4891fe
typo fixed
2018-04-11 18:32:27 +02:00
c8f1c55ec0
Add files via upload
2018-04-11 14:41:41 +00:00
02fda70529
farm mode: preheat menu updated
2018-04-10 14:07:44 +02:00
92997204a1
Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20
2018-04-03 12:30:35 +02:00
baade7db61
Removed unused files (ST7565R-dogm, digipot)
...
renamed functions digipot_init and digipot_current
fixed cond. trans. (menus)
fixed variant files - MK25, MK3
2018-03-29 23:01:13 +02:00
cedb30303f
Add possible action on menu item back. This fixes broken Merge pull request #586 from mkbel/ustep_linearity_2 06d5ec5.
2018-03-29 11:42:44 +02:00
d5636fd023
Merge pull request #585 from PavelSindler/farm_mode_MK3
...
checking if file is complete temporarily not active in farm mode
2018-03-28 19:39:00 +02:00
06d5ec5659
Merge pull request #586 from mkbel/ustep_linearity_2
...
Ustep linearity
2018-03-28 19:38:34 +02:00
ffdd11e960
Merge pull request #587 from XPila/MK3-V3_2
...
Mk3 v3 2
2018-03-28 19:38:20 +02:00
9cb036fbcb
Merge remote-tracking branch 'prusa3d/MK3' into ustep_linearity_2
2018-03-28 19:11:02 +02:00
40a064ffbc
Add extruder linearity correction to settings menu.
2018-03-28 18:53:37 +02:00
6e15a77c9b
preheat menu update
2018-03-28 17:50:16 +02:00
95e751dd65
farm mode: preheat menu update
2018-03-28 17:04:46 +02:00
2c3c6c54f3
checking if file is complete temporarily not active in farm mode
2018-03-28 17:00:17 +02:00
8ba83a9789
bugfix - PFW226 - selftest error
2018-03-28 16:13:54 +02:00
678cd17e7b
Increase size of EEPROM_TMC2130_WAVE_*_FAC to 16 bits.
2018-03-28 16:13:16 +02:00
57bbb0e17d
Fix wraparound from lowest value to highest value in menu value edit.
2018-03-26 20:25:23 +02:00
397e7d4791
Increase resolution of wave factor.
2018-03-26 15:17:06 +02:00
903dce9716
Merge pull request #576 from PavelSindler/MK3_for_merging
...
stealth mode / silent mode
2018-03-23 20:42:08 +01:00
2ce75293f3
stealth mode / silent mode
2018-03-23 19:49:59 +01:00
5a7e76e02b
Merge pull request #575 from PavelSindler/adc_pins
...
Adc pins, pinda temp table
2018-03-23 19:36:23 +01:00
dc32bd24fc
correction
2018-03-23 18:20:55 +01:00
2d30261976
bed voltage menu hidden
2018-03-23 16:49:06 +01:00
7ad6fb526c
typo removed
2018-03-23 15:53:44 +01:00
78f9f6b611
use defines for adc pins, temp table for PIDNA update
2018-03-16 11:01:06 +01:00
08ec920d33
merge with upstream
2018-03-15 14:25:17 +01:00
863fe1f054
show message that printer is not connected to monitoring on printer start
2018-03-14 15:35:39 +01:00
2f98ac989a
Variant file for MK2 + cond. translation
2018-03-13 23:14:44 +01:00
81cd96b8fe
Variant file for MK25 + cond. translation
2018-03-13 23:02:46 +01:00
ac1a56b493
Merge branch 'MK25' into MK3
2018-03-13 20:43:19 +01:00
5d389a2c36
Farm mode: when print finishes, ask which filament was used for print; statistics modified
2018-03-13 19:11:02 +01:00
8ec3c0fd7e
removed "Printer disconnected" message
2018-03-13 18:50:56 +01:00
f45f206faf
sorting files disabled in farm mode, start printer status needs reponse from monitoring
2018-03-13 18:50:11 +01:00
ddeb7b8c84
statistics improved, initial version of function which forces user to connect printer to monitoring
2018-03-13 18:43:42 +01:00
f487691070
Merge pull request #536 from mkbel/menu_return
...
Menu return
2018-03-13 14:30:48 +01:00
98e96c9182
Merge pull request #457 from bubnikv/MK3_fast_dbg
...
Mk3 fast dbg
2018-03-13 14:13:29 +01:00
b41d680adf
Replace problematic character in comment.
2018-03-07 20:58:15 +01:00
8ff028820a
Remove redundant parameter.
2018-03-07 20:55:01 +01:00
abb9aa0a16
not using homing currents in axis selftest
2018-03-07 20:42:15 +01:00
2a53686d2f
Document valid usage of lcd_goto_menu(), remove redundant parameter.
2018-03-07 20:40:59 +01:00
1aba608133
Document valid usage of lcd_goto_menu(), wrap lcd_second_serial_set() by HAS_SECOND_SERIAL_PORT macro.
2018-03-07 18:30:33 +01:00
0c961dedc4
Reset menu stack in lcd_return_to_status().
...
Mark menuStack.reset() as redundant in lcd_status_screen(), but leave it there to be sure.
2018-03-07 18:15:24 +01:00
716098c434
Preserve position in menu move axis Extruder.
2018-03-07 17:27:27 +01:00
d0a98dc6cc
Document valid usage of lcd_goto_menu().
2018-03-07 17:18:10 +01:00
0871925353
Remove special handling of lcd_move_z after long button press. Convert lcd_move_z after long button press to ordinary menu_action_submenu.
...
Known bug (feature) is, that with current maximum stack depth, when long press is activated in menu > settings > move axis > Move X and then Move Z is deactivated, menu is returned to "move axis" and not to "Move X".
2018-03-07 17:03:17 +01:00
77c3d7d7f7
Review and document lcd_adjust_bed_reset() lcd_goto_menu() usage.
2018-03-07 16:47:20 +01:00
6ba07a358b
Fix of a regression bug, caused by pre-calculating the extrudemultiply
...
for precission and performance: calculate_extruder_multipliers()
has to be called after extrudemultiply is changed from the printer panel.
2018-03-07 16:08:19 +01:00
33a7723fba
Merge pull request #533 from bubnikv/M221_fix
...
Fix of a regression bug, caused by pre-calculating the extrudemultiply
2018-03-07 16:03:50 +01:00
fb4230f80d
Fix of a regression bug, caused by pre-calculating the extrudemultiply
...
for precission and performance: calculate_extruder_multipliers()
has to be called after extrudemultiply is changed from the printer panel.
2018-03-07 15:46:46 +01:00
b7df176a46
Preserve position in menu Live adjust Z.
2018-03-06 22:45:47 +01:00
ed0e7a8b58
Preserve position in menu move axis.
2018-03-06 21:27:06 +01:00
020269a83c
Fix unable to go back from main menu to status screen.
2018-03-06 21:26:14 +01:00
e551ed1f6e
Replace lcd_goto_menu(...) by menu_action_back() in lcd_menu_fails_stats();
2018-03-06 19:51:13 +01:00
235803bc2a
Move encoder stack to separate class MenuStack. Add menu record to MenuStack.
...
It was needed to add menuFunc_t menu to stack, as in some places in menu, it is impossible to hardcode parent menu. Example: lcd_babystep_z can be invoked both from main_menu() and settings_menu() depending on printer status.
2018-03-06 19:47:27 +01:00
a6f900fd3c
Merge remote-tracking branch 'upstream/MK25' into MK25
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2018-03-06 15:11:50 +01:00
54749cbcba
Merge pull request #524 from mkbel/Add_fail_stats
...
Add fail statistics menu item for MK25.
2018-03-06 11:55:22 +01:00
115416dc60
Merge pull request #520 from mkbel/MK25
...
Remove Rpi port menu item for MK25.
2018-03-06 11:53:37 +01:00
67fd467ebe
Add fail statistics menu item for MK25.
...
As there is only filament sensor and no crash and power interruption detection, squash everything into single screen.
2018-03-05 21:42:04 +01:00
11e7eb27ee
Merge remote-tracking branch 'remotes/origin/M221_fix' into MK3_fast_dbg
2018-03-05 19:13:07 +01:00
7164e66e4d
Remove Rpi port menu item for MK25.
2018-03-05 17:14:20 +01:00
74fa599f48
Remove Rpi port menu item for MK25.
2018-03-05 17:04:01 +01:00
917689b5ce
tune menu
2018-03-05 01:23:18 +01:00
a369c7900e
tune menu updated
2018-03-05 00:47:34 +01:00
ca3ba55ca7
initial version
2018-03-05 00:46:24 +01:00
85bc19b77c
force selftest if user upgraded from 3.1.2-RC1 or older fw version
2018-02-27 17:52:13 +01:00
73b0349898
fix - Z movement speed in selftest
...
conditional translation for linearity correction and variable resolution
2018-02-23 16:31:24 +01:00
06da2bb915
Accurate homing, fix - enabled after selftest.
...
Experimantal menu - conditional translation.
2018-02-22 20:50:34 +01:00
ad33d3efd1
Merge pull request #488 from PavelSindler/xyz_corrections_3
...
Xyz corrections
2018-02-22 11:48:06 +01:00
a4b3389dfa
M45 verbosity, steel sheet define, minor modifications in xyz cal
2018-02-22 10:38:46 +01:00
c5175e97ec
Pinout, conditional translation and variant file for MK2
2018-02-21 15:19:34 +01:00
66161062cf
Homing accuracy calibration in selftest.
2018-02-20 19:02:55 +01:00
dff8c29362
Microstep linearity correction, optimized wave compression.
...
Correction factor can be adjusted from 0.9 to 1.25 by 0.005 steps.
2018-02-17 19:58:40 +01:00
dd2468d306
Avoid the stepper interrupt being missed by extending the tick time
...
beyond the current time. This is a trick borrwed from upstream Marlin.
In debug mode, watch for the missed stepper interrupt ticks where the interrupts
are missed by more than 20% of the 10kHz stepper interrupt repeat rate,
and show the statistics (number of missed ticks and by how many micro
seconds was the interrupt missed, and what was the maximum missed
interrupt delay) on the display and send it to the serial line.
2018-02-15 11:44:19 +01:00
79caf3d9c6
tmc2130 optimalization, accurate homing and microstep linearity correction
...
dcode D12 removed (no longer needed)
homeaxis optimized + xy home calibration support
new eeprom variables
new lcd menu edit types (byte3, mres, wfac), new menu "Experimental"
currents adjusted
2018-02-15 04:17:58 +01:00
081b3852fc
Menu - encoder position stack
2018-02-09 20:26:42 +01:00
31e6271b2c
Voltage measurement - conditional translation
2018-02-08 21:07:17 +01:00
0c98ec5f6b
selftest, max endstops undefined, initialization of extruder fan, y offset from extruder
2018-02-06 17:01:09 +01:00
abf956b86f
init
2018-02-06 09:19:27 +01:00
8562235440
MK2.5 port - compilable version
2018-02-01 20:08:11 +01:00
9d8191323b
Merge pull request #440 from XPila/3.1.1-RC6
...
Extruder stealthChop and constant-off-time mode.
2018-01-31 20:21:02 +01:00
210b97d16d
New fail stats (global, last print), crashdetection X and Y separated
2018-01-30 13:10:36 +01:00
cbcfcee48f
PID cal. is not sending OK periodically, print fan error pauses print in octoprint (not disconnecting), initialize serial line when swithing in settings menu
2018-01-25 15:23:11 +01:00
975ed14cb6
Merge pull request #431 from PavelSindler/fan_error_resume
...
SD card long pause update
2018-01-24 00:12:33 +01:00
110ab8b2f6
Merge pull request #426 from PavelSindler/temperatures_update
...
Preheat temperatures update
2018-01-24 00:11:59 +01:00
64a709c097
removed temporary debuging code
2018-01-23 19:14:52 +01:00
05e0abbd9d
startFileprint delayed
2018-01-23 19:11:04 +01:00
c38458eb67
init
2018-01-23 16:21:43 +01:00
09e0c566e8
Merge pull request #420 from bubnikv/MK3_stepper_blocking
...
Mk3 stepper blocking
2018-01-23 13:15:59 +01:00
188116cb7e
Preheat temperatures update
2018-01-22 16:03:43 +01:00
815dfcb14b
Implemented a stepper timer reset after a long blocking cli()
...
or DISABLE_STEPPER_DRIVER_INTERRUPT().
If this is not done, the stepper interrupt would likely overflow,
leading to a maximum 32ms delay before the stepper interrupt wakes up.
In addition, the stepper timer overflow error would be reported
by the debug builds.
2018-01-20 15:39:21 +01:00
7edce0b890
Only show the debug menu in the DEBUG_BUILD.
2018-01-18 16:43:40 +01:00
330f1576fc
Support for debug builds:
...
A build version and repository is displayed on the welcome screen,
D-codes, stack overflow check and stepper timer overflow check
are enabled in the debug mode.
2018-01-18 16:24:25 +01:00
981a681e52
Temperature ISR synchronization, M600 - faster unload
2018-01-15 17:29:07 +01:00
87ffb0b193
Merge pull request #400 from PavelSindler/M600_update
...
M600 update
2018-01-15 15:27:41 +01:00
c36af887b7
M600 has timeout for nozzle, different procedure for unload
2018-01-15 11:30:28 +01:00
552b1f03b1
build 145
...
fixed - finishstatus declaration
2018-01-13 19:16:09 +01:00
8bd84ba4fd
Merge pull request #396 from XPila/MK3
...
Mk3
2018-01-12 22:08:50 +01:00
530dfba417
Status message limit (PFW-124)
2018-01-12 21:21:21 +01:00
3e6d853364
Debugging of the stepper timer routine. When enabled through
...
DEBUG_STEPPER_TIMER_MISSED, the printer is halted on stepper timer overflow
and an error message is displayed.
2018-01-12 20:51:14 +01:00
0f46fa0c37
blocking messages in settings/tune menu (PFW104)
...
switch normal/stealth (PFW110)
2018-01-12 19:54:32 +01:00
f5ed12817d
Merge pull request #388 from PavelSindler/first_layer_saving
...
Live adjust Z saving using timeout
2018-01-11 17:49:40 +01:00
97bd56d560
Merge pull request #386 from PavelSindler/selftest_swapped_fans
...
manual check for swapped fans
2018-01-11 17:45:23 +01:00
087532085f
development fw versions has initial message for warning
2018-01-11 15:50:26 +01:00
cc20da62a8
whitespace
2018-01-10 23:31:06 +01:00
c185b46eb2
live adjust Z saving using timeout
2018-01-10 23:28:41 +01:00
c79d960cb5
manual check for swapped fans
2018-01-10 16:40:06 +01:00
b53197fdd1
Fixed error messages for print fan and extruder fan (were swapped)
2018-01-08 12:07:45 +01:00
8a5ba89a9c
Missing serial characters debuging
...
disabled fan ISR
disabled fsensor ISR
disabled linear advance
build 143b
2018-01-02 20:55:33 +01:00
e3c006dbe9
Serial communication uses port0 or port1, not both, removed some suspected code.
...
build 141
2017-12-29 00:06:47 +01:00
f1c741d027
Filament autoloading improved and minor tweaks
...
Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading)
Autoloading now unable to turn on when filament sensor is turned off or not responding
Color not right changed to color not correct to avoid slight confusion
2017-12-28 18:59:57 +01:00
5e5588c72c
Text grooming
...
Added language mutations of error messages, menu items.
Synced wording of crash detection in messages.
rPi port -> RPi port.
Minor menu items alignment.
2017-12-28 15:45:52 +01:00
69d496e157
autoload filament menu (PFW-95, PFW-96)
2017-12-27 21:57:51 +01:00
cbd7f033e8
crashdetection and mode menu (PFW-85, PFW-97)
2017-12-27 21:43:04 +01:00
546314fda7
Removed debug messages from serial comunication (octoprint...).
...
build 137b
2017-12-27 20:29:24 +01:00
7f05b9fd44
changed menu order (PFW 91)
2017-12-22 20:31:45 +01:00
6abba7bfe9
filament autoload - better detection algorithm, autoload in M600 from menu
...
unload menu always visible
2017-12-22 20:14:26 +01:00
f227952c0b
Merge branch 'MK3' into MK3
2017-12-21 00:07:01 +01:00
17d9bb205a
selftest tests filament sensor, selftest messages have language variants
2017-12-20 23:40:18 +01:00
eba2924fdd
Remove load/unload menu when autoload enabled
2017-12-20 22:55:11 +01:00
a3a0e70eeb
Fsensor autoload enabled menu and eeprom variable
2017-12-20 22:29:41 +01:00
a9d5af4a07
Wizard: dont ask if color is clear and dont use automatic filament load; multiscreen messages update
2017-12-20 13:33:45 +01:00
525d022841
whitespace
2017-12-18 19:17:39 +01:00
31add2e69f
removed 4 bytes from maiden eeprom check as these could be set earlier to 0 by lcd_status_screen function
2017-12-18 19:15:36 +01:00
9639b58f4d
Merge pull request #329 from XPila/MK3
...
Meassuring voltages (pwr, bed), voltages menu
2017-12-15 18:42:59 +01:00
01654e7145
Meassuring voltages (pwr, bed), voltages menu
2017-12-15 18:33:35 +01:00
ecbb5cf54b
selftest fix
2017-12-15 17:54:52 +01:00
3c95bea693
threshold changed
2017-12-15 14:07:12 +01:00
011ebb3675
selftest is checking if fans are swapped, host keepalive messages added
2017-12-14 19:36:32 +01:00
8c320d0089
selftest delay -> delay_keep_alive
2017-12-13 14:55:53 +01:00
c1416cbb33
Merge pull request #312 from PavelSindler/wizard
...
Wizard: force high power mode during xyz cal. and selftest; wizard for assembled printer
2017-12-12 20:24:15 +01:00
82dffb688a
force high power mode during xyz cal. and selftest
2017-12-12 20:21:09 +01:00
997c8de161
shipping prep. reset sets wizard flag, shipping prep wizard improvements
2017-12-12 19:17:37 +01:00
f8e3c76315
merging new changes from upstream/MK3
2017-12-12 17:14:48 +01:00
a724c2664c
menus updated, set lcd_commands_step = 0;
2017-12-12 14:25:13 +01:00
9ef5570fa3
menus accessable during first layer calibration updated
2017-12-12 13:41:31 +01:00
d29a95bd65
if first layer calibration is active set SD_PRINTING to true
2017-12-12 11:41:54 +01:00
7204e91ec6
Filament sensor not responding - (PFW-41)
...
build number = 130
2017-12-11 18:17:25 +01:00
124a3e6da8
Stealth mode limits + END_FILE_SECTION=10000
2017-12-11 16:17:36 +01:00
20de899d25
Merge branch 'MK3' into sort_files
2017-12-11 11:50:47 +01:00
13a17f9fd4
dont sort files when changing sort type in settings menu
2017-12-11 11:45:20 +01:00
1c61f2f29c
First working version
2017-12-11 11:30:49 +01:00
b76758b7b6
Ram status - heap and stack monitor.
2017-12-10 23:45:46 +01:00
e8b2043d03
Stack monitor in stepper ISR
2017-12-10 20:38:09 +01:00
26135ea227
all sd sort files: initial version; sorting type switch not added to SD card menu itself
2017-12-10 11:08:50 +01:00
82f5a79527
bug fix (cannot compile) - ultralcd.cpp - conversion from (const char*)
2017-12-08 19:22:02 +01:00
868aacc7d5
turn on second serial line from settings menu
2017-12-08 16:56:06 +01:00
d0b6b19373
save filename to eeprom first, then check if file is complete
2017-12-07 17:16:23 +01:00
2cbd1f7894
fix: added saving filename to eeprom which was removed by accident
2017-12-06 18:13:54 +01:00
44218a1b53
incomplete file check ported from MK2: initial version
2017-12-06 14:55:53 +01:00
a56b0ccaf8
bugfix - Filament sensor enable from menu
2017-11-29 00:15:45 +01:00
1863819e39
pat9125 reinit when fsensor enabled from menu.
2017-11-28 22:44:58 +01:00
ddc8587bbd
Merge pull request #112 from PavelSindler/menu_corrections
...
Menu corrections, translation to Czech language
2017-11-27 18:00:31 +01:00
ce3f14e1c0
tune menu updated
2017-11-27 17:55:32 +01:00
67a2e0a706
settings menu updated
2017-11-27 17:01:01 +01:00
f075711e64
corrected menus
2017-11-27 16:37:46 +01:00
7c6d63ffb5
pla preheat temp. changed, temp calibration on/off moved to settings menu
2017-11-27 16:21:54 +01:00
Robert Pelnar
PavelSindler
PavelSindler
MRprusa3d
Marek Bel
MRprusa3d
mkbel
bubnikv
Michal Průša