bdf53387b1
Disable temperature compensation and temperature calibration menu if superPINDA is detected.
...
Even though functionality was added, 20B of flash memory has been saved.
2020-06-16 00:19:06 +02:00
fe72ba7a9d
Add PC-blend preheat preset
2020-06-03 17:45:55 +02:00
751f810dd7
ALTFAN implementation ( #2692 )
...
* ALTFAN implementation
* Use CRITICAL_SECTION macros
* Use uint16_t instead of unsigned int
* Add forgotten CRITICAL_SECTION
* Documentation
2020-06-01 17:58:15 +02:00
a10b7f3963
Merge pull request #2470 from leptun/MK3_Adjusted_mintemp
...
Adjusted hotend, bed and Ambient mintemp values
2020-02-07 08:54:50 +01:00
eb2ca78167
Rewrite uvlo handling for accurate Z re/positioning
...
- In both uvlo_ and uvlo_tiny, calculate Z usteps properly and adjust
the Z position to a true fullstep before disabling the motor. This
avoids shifs during recovery.
- In uvlo_tiny, instead of moving up indefinitely, adjust Z just
once using the smallest move possible (new def UVLO_TINY_Z_AXIS_SHIFT)
- Perform all the uvlo/recovery processing in physical coordinates
and MBL off: there should be no automatic Z movement!
- Disable heaters in both handlers to conserve more power.
- Add timing information to uvlo_tiny too.
- During recovery, to switch between physical and logical positioning
introduce a new "PRUSA MBL" gcode as most of the procedure is
enqueued, and no existing gcode was available.
2020-01-26 17:46:50 +01:00
e6ba9e633c
Adjusted hotend, bed and Ambient mintemp values
2020-01-21 14:50:53 +02:00
4c74866864
Merge pull request #1933 from prusa3d/enable_cutter
...
Enable MMU cutter.
2020-01-09 13:47:44 +01:00
779423f0e7
Move hardcoded values to variants
2019-11-29 15:06:54 +02:00
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu
...
Unify preheat menu, add ASA material
2019-09-12 14:25:38 +02:00
0fda4e5594
Merge branch 'cut_last_try' into enable_cutter
2019-09-10 18:37:09 +02:00
898e85e69f
Merge pull request #2038 from Eriobis/MK3
...
Add a threshold distance to Z calibration
2019-09-10 16:20:24 +02:00
7cc9fe2e4f
Update 1_75mm_MK3S-EINSy10a-E3Dv6full.h
2019-09-09 02:20:39 +02:00
70de4d58f6
Update 1_75mm_MK3-EINSy10a-E3Dv6full.h
2019-09-09 02:20:14 +02:00
fb561b15ad
Update 1_75mm_MK25S-RAMBo13a-E3Dv6full.h
2019-09-09 02:19:52 +02:00
325e4a3403
Update 1_75mm_MK25S-RAMBo10a-E3Dv6full.h
2019-09-09 02:19:27 +02:00
0b50b2295c
Update 1_75mm_MK25-RAMBo13a-E3Dv6full.h
2019-09-09 02:18:54 +02:00
e581263bf1
Update 1_75mm_MK25-RAMBo10a-E3Dv6full.h
2019-09-09 02:18:22 +02:00
ca6937edaf
Update 1_75mm_MK2-RAMBo13a-E3Dv6full.h
2019-09-09 02:17:42 +02:00
a9a3d9d084
Update 1_75mm_MK2-RAMBo10a-E3Dv6full.h
2019-09-09 02:17:00 +02:00
3da43ae8c2
Do not port print fan preheat speed preset, as it was never used. And it was broken until recently fixed when adding ASA profile.
2019-08-26 21:14:07 +02:00
eb68bb9b43
Add ASA preheat.
2019-08-15 17:46:29 +02:00
469ca6e184
Merge commit 'refs/tags/v3.8.0-RC1^{}' into enable_cutter
2019-08-15 14:48:28 +02:00
49d2866b48
Add threshold distance to Z calibration
...
Add missing if statement
2019-07-30 19:43:07 -04:00
f9e32c4bf4
Re-enable linearity correction for MK3.
2019-07-23 19:22:54 +02:00
8b806f692e
Merge pull request #1664 from MRprusa3d/PFW-811
...
"disable_z()" for Delta PSU
2019-07-16 16:46:34 +02:00
4e7de776cd
Disable TMC2130 linarity correction for MK3 to save FLASH to enable compilation. Add symlink /Firmware/variants/printers.h to .gitignore.
2019-07-10 17:07:00 +02:00
8229a45187
pre-production version ;-)
2019-07-09 12:16:51 +02:00
4db4f19128
'variant files' update ;-(((
2019-07-03 18:14:48 +02:00
7e3cb98a1f
& MK3S
2019-07-03 17:50:41 +02:00
a3a7f3106e
print parameters checking
2019-07-03 17:21:11 +02:00
181c42fa62
Merge remote-tracking branch 'prusa3d/MK3' into enable_cutter
2019-06-18 20:03:41 +02:00
b7d3766ae2
Merge branch 'MK3' into PFW-790
2019-06-12 17:32:13 +02:00
00da4640e2
Document.
2019-05-30 23:29:33 +02:00
efa8e6e6ba
Merge pull request #1658 from Harpalyke/save-ustep-res-with-M500
...
Allow save of uStep resolution with M500
2019-05-13 17:08:34 +02:00
a9d6ae296b
Enable watchdog for all variants.
2019-05-10 16:30:08 +02:00
18dec75b56
MK2.5 - watchdog enabled + test (command "D-1")
2019-04-29 13:19:59 +02:00
469aa10097
Enable MMU cutter.
2019-03-29 07:27:29 +01:00
632781c4a2
"disable_z()" for Delta PSU
2019-03-21 00:45:15 +01:00
0f21ccee3c
Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S
2019-03-19 21:39:59 +00:00
7d98177716
farmMode updates
2019-03-19 19:48:40 +01:00
c05561d6b1
Merge pull request #1607 from PavelSindler/7x7
...
7x7 mbl and switching mmu modes
2019-03-15 19:55:15 +01:00
0ca52216f3
Revert "variants update"
...
This reverts commit c3a95ab79b
2019-03-15 13:14:32 +01:00
ffe45bdef3
Disable mmu filament cutter feature.
2019-03-15 03:38:37 +01:00
9e0e4198c5
Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update
2019-03-14 01:52:44 +01:00
c3a95ab79b
variants update
2019-03-12 11:57:35 +01:00
f0cc313fed
debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified
2019-03-06 19:56:48 +01:00
7f92d73a40
MMU_STEALTH_MODE -> MMU_FORCE_STEALTH_MODE; activate_stealth_mode() function update
2019-03-04 17:04:22 +01:00
26cab2911f
mmu stealth mode
2019-02-22 16:30:54 +01:00
a220c97f94
Revert "variant files"
...
This reverts commit 850d3316b6
2019-02-06 16:19:30 +01:00
850d3316b6
variant files
2019-02-06 15:18:12 +01:00
Marek Bel
D.R.racer
Alex Voinea
DRracer
Yuri D'Elia
MRprusa3d
Simon Benoit
MRprusa3d
Marek Běl
Robert Pelnar
Harpalyke
PavelSindler
PavelSindler