2d25a5705f
Fix D2 to read the entire SRAM content
...
Allow to read up to 0x21ff, which is the last byte of SRAM. Set default
starting address to 0x200, which is the first true byte.
0x0-200 is mapped to register/io space and could cause issues when read
from bi-directional registers.
2021-06-07 16:37:34 +02:00
62f496e1d6
Allow D2 to be enabled selectively
2021-06-07 16:37:34 +02:00
6bb7c0e3d3
Farm workaround M1 message
...
Farmers want to abuse a bug from the previous firmware releases
- they need to see the filename on the status screen instead of "Wait for user..."
So we won't update the message in farm mode...
2021-05-25 09:45:42 +02:00
3c63ddaafd
Fix the eeprom address documentation
2021-05-22 17:09:55 +03:00
04de9c0c8a
Version changed (3.10.0 build 4481)
2021-05-06 13:46:05 +02:00
1a92f2e19f
Merge remote-tracking branch 'upstream/MK3_3.10.0' into fix_partial_redraw2
2021-05-04 10:49:24 +02:00
eaa6801849
Merge pull request #3136 from leptun/PFW-1225_fix_open_file_from_sd_wrong_file
...
Fix menu_action_sdfile() check_file(filename) call
2021-04-29 16:34:01 +02:00
80e248662c
Merge pull request #3079 from 3d-gussner/PFW-1189
...
PFW-1189 Pre-release tasks
2021-04-29 16:33:18 +02:00
89386036e6
Merge pull request #3137 from leptun/PFW-1239_fix_M23_subroutine_issue
...
Do not allow M23 to run subroutines
2021-04-29 15:06:33 +02:00
a3b392d96c
Merge pull request #3130 from DRracer/move-alldata-2-end
...
Move All Data into last position in Factory Reset menu
2021-04-29 10:08:32 +02:00
8610d0a850
Do not allow M23 to run subroutines
2021-04-29 10:59:21 +03:00
7c914ec2d1
Merge pull request #3125 from leptun/PFW-1238_fix_M105_from_SD
...
Fix M105 from SD
2021-04-29 09:12:05 +02:00
1a70f3369d
fix comment
2021-04-29 09:48:25 +03:00
d9976ca69c
Fix menu_action_sdfile() check_file(filename) call
2021-04-29 09:47:16 +03:00
a9ae8ea731
Remove `SpoolJoin` from translations
2021-04-29 08:15:24 +02:00
488d9d4b38
Remove "Firmware" from translations
...
deleted another unused "Firmware" define in language.h
2021-04-28 18:02:36 +02:00
d251f3980a
Remove FlashAir from translations
2021-04-28 17:57:39 +02:00
b5ba4041d3
Remove FINDA from translations
2021-04-28 17:36:17 +02:00
08566d4121
Remove PINDA from translations
2021-04-28 17:33:52 +02:00
30b383195d
Remove copy/paste error
2021-04-28 17:29:32 +02:00
aee04a43e2
Redraw "Preheating to load" in full when modified by other actions
...
Check for lcd_draw_update to see if the lcd has been altered outside the
function and redraw the screen if full.
This fixes scenarios such as #3129 where the "Card removed" message or
the SD menu is entered from outside the function's control.
This requires checking/resetting bFilamentWaitingFlag carefully to avoid
re-entering this function _twice_ (raise_z_above will run the main
loop until complete).
2021-04-28 17:13:46 +02:00
5089b2cddb
Move All Data into last position in Factory Reset menu
2021-04-28 06:43:54 +02:00
7a54c3638c
Remove web links and `Prusa i3 MKxy OK.` from translations
...
as these never have been translated or doesn't make sense
to translate web links
2021-04-27 20:36:22 +02:00
686054b95e
Changed `x of 4` and `y of 9` to `x/4` and `y/4`
...
Added `Iteration` translation
2021-04-27 20:22:28 +02:00
738a24178a
Update #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
2021-04-27 07:45:36 +02:00
b8ae08fd3d
Update `x of 4` and `x of 9` messages so longer text can be used.
2021-04-27 07:18:52 +02:00
1145b231a9
Define MSG_SELFTEST_FS_LEVEL
2021-04-26 14:30:20 +02:00
af519626aa
Define MSG_FS_V_04_OR_NEWER and MSG_FS_V_03_OR_OLDER c=14
2021-04-26 14:21:33 +02:00
b522ef4812
Update MSG_SEVER_SKEW and MSG_SLIGHT_SKEW message to c=14
...
Changed and tested Support-> "XYZ cal. details" LCD output
2021-04-26 12:39:13 +02:00
536a8f5f87
Revert that has been commited by mistake
2021-04-26 07:28:03 +02:00
466de83ae0
Remove white spaces in messags which saves ~62bytes
2021-04-26 07:22:22 +02:00
29ad021b23
Updated French translation of MSG_MMU_LOAD_FAILED c=20 as @awenelo suggested
2021-04-24 20:50:01 +02:00
9f77ca31b8
Set MSG_SET_TEMPERATURE chars to c=20
...
Fix Italian warning shown by `lang-check.py`
2021-04-24 08:19:48 +02:00
aa45091400
Scale extruder motor current linearly with speed. ( #2813 )
...
Scale extruder motor current linearly with speed.
49% less heating when running at low speed and standstill, 4% more torque at maximum extrusion rate (15mm^3/s), 15% more torque in high speed movements (un/retractions).
StealthChop mode is used for low speeds (below 900mm/min)
spreadCycle is used above. Transition speed is well above maximum extrusion rate of 15mm^3/s (275mm/min) so mode transition is not expected to be visible on printed surface.
StealthChop is expected to improve printed surface quality (less artifacts).
Warning you can burn extruder motor if it is not the same impedance as original Prusa i3 Extruder stepper motor. There is no current feedback in low speed so lower impedance motor can be burned by over current.
Even there is no direct current feedback, there is no risk for original motor thermal runaway, as motor resistance increases with temperature, current decreases.
Standstill peak phase current is expected to be 500 mA and linearly increase with speed to 970 mA at 900mm/min where spreadCycle constant current regulation takes over and keeps peak current at 805 mA to maximum speed possible.
As motor heating increases with current squared, lowering low speed current from 700mA to 500mA decreases heating 49% in thate mode, where motor spends most of the time.
Enable E-motor cool mode in farm mode only (and experimental menu) - the experimental menu is visible AND the EEPROM_ECOOL variable has a value of the universal answer to all problems of the universe - i.e. two conditions must be met at the start of the FW to enable the E-cool mode. If the user enables the experimental menu, sets the E-cool mode and disables the menu afterwards, on the next start of the FW the E-cool mode will be DISABLED. This is still subject to discussion how much obscure (security through obscurity) we'd like this option to have .
Additional stuff:
* Add serial debug msg to verify if E-cool mode is on
* Avoid access to E-cool mode switch on machines without TMC2130
* Do not allow only M907 E in case of E-cool mode+warn the user on the serial line that the command was skipped
Co-authored-by: D.R.racer <drracer@drracer.eu>
2021-04-23 16:06:28 +02:00
c2cde83d7e
Fix MSG_SELFTEST_WIRINGERROR to c=18
2021-04-23 13:29:45 +02:00
3f51627c02
Fix MSG_NO being too short, no need to be
2021-04-23 13:23:11 +02:00
013708479f
Fix MSG_UNLOAD_FILAMENT length as in MMU a number is added
2021-04-23 13:12:57 +02:00
032e8a5957
@leptun strip 1st char hack for duplicate `Cancel`
2021-04-23 13:03:59 +02:00
403b340f19
Added ` EXTENDED_M20` to RepRap Gcode wiki `M115` see https://reprap.org/mediawiki/index.php?title=G-code&type=revision&diff=189034&oldid=189033
2021-04-23 11:02:42 +02:00
635bc442d6
Fix M105 from SD
2021-04-23 11:14:16 +03:00
28aec049a2
Fix Typo in MSG_FIL_FAILED
2021-04-23 09:41:12 +02:00
ff9185d1bb
Readded `>Cancel` as the `>` has some meaning. Sadly the previously 10bytes more free space are gone again
2021-04-23 08:50:50 +02:00
044c0a0a6a
Update "\04Refresh" message as two "abcd" "efgh" in one line cause issues in lang-build scripts
2021-04-23 08:49:22 +02:00
e18d688b64
Fix merge issues
2021-04-22 20:48:26 +02:00
681bc560c9
Merge remote-tracking branch 'upstream/MK3_3.10.0' into PFW-1189
2021-04-22 20:43:54 +02:00
999b93be35
Merge pull request #3123 from prusa3d/MK3_3.10.0
...
MK3 3.10.0
2021-04-22 12:53:26 +02:00
00ce16ee55
Merge pull request #3121 from wavexx/reduce_m600_min_height
...
Revert/cleanup mininum extruder height during M600
2021-04-22 11:43:18 +02:00
1e0fd8af87
Merge pull request #3120 from wavexx/fix_lcd_redraw_autoload
...
Fix partial redraw during filament autoload
2021-04-22 10:36:40 +02:00
98643825dc
Merge pull request #3055 from awenelo/add-satin-sheet
...
Add satin sheets
2021-04-22 07:13:32 +02:00
daef5428d2
Rework gcode_M600_filament_change_z_shift to make it consistent
...
gcode_M600_filament_change_z_shift is almost useless, since it performs
what is already been done internally by filament_unload().
However it *does* cause the carriage to raise earlier during unload
compared to making the user wait after "press for unload".
Change it so the calculated Z height matches MIN_Z_FOR_SWAP.
2021-04-21 19:12:26 +02:00
8d04316497
Revert/cleanup mininum extruder height during M600
...
This change restores the minimum extruder height for filament purge
during M600 from the current 50mm back to 27mm from FW 3.9.
We do this by introducing a new option for unload_filament() to indicate
that the unload is part of an automatic swap, and in such cases avoid
raising more than absolutely necessary (this will _also_ come in handy
to avoid the extra purge in PR #2318 during M600).
A new define MIN_Z_FOR_SWAP is introduced for this purpose.
MIN_Z_FOR_UNLOAD is still used for manual lcd unload and for M702 and
hasn't been changed.
2021-04-21 19:07:58 +02:00
bc355674d9
Fix partial redraw during filament autoload
...
If the printer was already being pre-heated but didn't reach the target
temperature yet and a new filament is being inserted, the LCD used to
display a "Preheating to load" message to block the loading until the
extruder is hot.
This message is currently missing, and the ">Cancel" option doesn't
display immediately either, depending on the extruder height.
This PR fixes this behavior, which was broken during an earlier update.
We now force-update LCD updates during the first (and _only_) time the
screen is setup, and push all messages _before_ the carriage is
eventually raised, so that ">Cancel" is shown immediately as well.
2021-04-21 16:56:16 +02:00
7d82cab125
Update doxygen
2021-04-20 09:16:56 +03:00
c4b70b82f3
Document M20 T parameter
2021-04-20 09:13:38 +03:00
1c0383c48f
Add capability report for extended M20
2021-04-20 09:03:22 +03:00
7011014abb
Save 16 bytes - pass ls_param by value to functions
...
... as ls_param is a 1-byte structure it is more conservative to pass it
to functions by value than by a pointer
2021-04-20 06:50:37 +02:00
2129bcf315
M20 T
2021-04-19 14:48:50 +03:00
b16e1e5235
Invert size and LFN in M20 L output
2021-04-19 13:54:43 +03:00
6d7d8c7c75
Do not show hidden/system dirs with M20 L
2021-04-19 13:31:30 +03:00
a5e4df390d
Sync before/after setting mesh_bed_leveling_flag/homing_flag
...
mesh_bed_leveling_flag and homing_flag should be set only when the
planner is empty as a consequence of #3100 , since any operation executed
*while* the mbl/homing flag is set is considered part of the compound
instruction that generated it (G80, G28, G30, G76).
Failure in doing so can result in instructions just prior being lost,
since they're incorrectly discarded (assumed to be redone).
G1 ; lost ..
G80 ; .. if PP happens here
2021-04-19 06:31:57 +02:00
23c75da727
Fix Crash/PP recovery position on instructions with comments
...
PR #2967 altered the way ``sdpos_atomic`` was set, causing issues in the
crashdetect/powerpanic recovery offset if the instruction being
recovered happens to contain a comment.
Previously ``sdpos`` was assumed to be a single byte prior to the last
read character. sdpos+1 would thus position the index to the next
instruction. With gcode-filtering in place, sdpos is left just before
the comment, while the actual read position is at the newline. This
causes to parser to resume in the middle of the comment.
Change the value returned by cardreader::get_sdpos() to always return
the last read position, as everybody expects (!!).
This avoids the +1, and correctly sets the resume position to the next
valid instruction without overhead.
2021-04-19 06:30:37 +02:00
c43688a549
Version changed (3.10.0-RC2 build 4104)
2021-04-16 13:52:36 +02:00
5a91e1de4d
Calibration: fix checking of scan of calibration points
...
PFW-1223
2021-04-14 06:25:18 +02:00
7356cd0811
EEPROM_JOB_ID
2021-04-09 08:09:51 +02:00
f9f6284c50
Merge pull request #3100 from wavexx/powerpanic_state_fixes
...
Fix PowerPanic and Crash Detection during homing and bed leveling
2021-04-07 18:19:50 +02:00
61faa49cbb
Fix buffer overflow in buf
...
Fix cmd overflow introduced in 186ce0f
2021-04-07 15:57:50 +02:00
d31601dcb8
Use correct mfrid for gd25q20c
2021-04-06 10:16:47 +02:00
94c1e65d83
Fix MK2.x builds
2021-04-06 10:16:47 +02:00
56948157d0
GD25Q40C xflash support
2021-04-06 10:16:47 +02:00
07bf4bbe48
Fix gd25120c rd_uid command
2021-04-06 10:16:47 +02:00
9454f9d8ec
Rename w25x20cl to xflash
2021-04-06 10:16:47 +02:00
449d181971
G80: handle power panic
...
This is handled in the same way crash detection is handled: homing/mbl
invalidates saved_target _and_ current position.
Fixes PP recovery during MBL and homing.
2021-04-06 02:20:00 +02:00
b46a52ffa8
G80: Handle crash detection
...
At a higher level, crash detection will repeat the last gcode command.
Some commands such as G28 or G80 need to be repeated in full and require
special handling.
In such cases, do not store the saved target coordinate (which is fake
in such cases) and invalidate the saved position.
This fixes the last coordinate of the first G1 move after recovery.
We also avoid moving from the origin when the saved position is
invalidated, which is not strictly necessary, but saves some time.
2021-04-06 02:00:47 +02:00
a5530593fa
G80: preserve lcd status and message when aborting
...
Restore the old status just before returning, so that the subsequent G80
can restore the first (initial) message correctly.
2021-04-06 00:31:56 +02:00
5923276a86
G80: correctly abort during crash detection
...
Crash detection is handled at a higher level (which automatically
repeats the current command), however we still need to abort the current
command correctly.
Handle XY crashes by checking the planner status after st_synchronize().
2021-04-06 00:31:29 +02:00
5da39df968
G80: Use consistent XY axis feedrate
2021-04-06 00:10:33 +02:00
ce2e35d14d
Move G80 into it's own function
...
No actual changes done in the function in this, besides break->return.
In G28, simply call the new function instead of using goto, making the
code more readable.
Also remove the senseless comments in G28 about command queuing (dating
back to when G80 was queued instead of being executed).
2021-04-05 23:35:17 +02:00
d2be40491b
PP recovery: clamp initial position to software endstops
...
As done when initializing the printer from a cold start, we need to
clamp the starting position to software endstops before setting the
planner position since 0,0 is frequently out-of-bounds.
This avoids an useless move during recovery that can cause a crash:
- Initial X is set to be 0
- G1 performed by homing will clamp X>=0, resulting in a positive shift
- If X is already at max X (extruder being parked due to PP), this will
slam at X+, causing an immediate crash.
2021-04-05 22:11:06 +02:00
3276320a06
Hide tmc2130_sg_change behind DEBUG_CRASHDET_COUNTERS
...
tmc2130_sg_change is only used for debugging purposes.
Hide definition and usage behind the required define.
2021-04-05 20:07:03 +02:00
6a61c26955
Removed unused crashdet_stop_and_save_print2
2021-04-05 20:04:50 +02:00
b74e1d6062
Update RepRap url for `M123`
2021-04-01 19:48:14 +02:00
e12c1dde5c
Updated RepRap Wiki and removed the @todos
2021-04-01 19:06:31 +02:00
3b431bcbc1
Fix output "Y distance from min" by removing ":" so translations can use 20 chars
2021-03-31 08:54:16 +02:00
d864a5cfdb
Define #MSG_PRINTER_IP c=18
2021-03-31 08:46:17 +02:00
9922774fa7
Cleanup some comments ////c=
2021-03-31 08:11:19 +02:00
8e74cbce58
Remove r=1 and some minor fixes
2021-03-31 08:07:42 +02:00
fb691b44b4
Update #MSG_INFO_SENSORS c=18
2021-03-31 07:51:22 +02:00
3fb90be46f
Define #MSG_SELECT c=18
2021-03-31 07:50:18 +02:00
9a0e67c1d7
Define #MSG_RENAME c=18
2021-03-31 07:43:48 +02:00
15919a0f09
Define #MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5, #MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
2021-03-31 07:41:21 +02:00
cdfc40fb62
Define #MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
2021-03-31 07:38:41 +02:00
c0869efc76
Define #MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4, #MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
2021-03-31 07:36:26 +02:00
268d4020cf
Define #MSG_FINDA c=5 and update #MSG_PINDA c=5
2021-03-31 07:32:43 +02:00
c0b8eef6cd
Define #MSG_FALSE_TRIGGERING c=20
2021-03-31 07:29:42 +02:00
1ca443f1f4
Define #MSG_CHECKS c=18
2021-03-31 07:28:18 +02:00
5e049283be
Define #MSG_UNKNOWN c=13
2021-03-31 07:24:41 +02:00
982153fee1
Define and update #MSG_PRINT_TIME c=19, #MSG_FILAMENT_USED c=19, #MSG_TOTAL_FILAMENT c=19, #MSG_TOTAL_PRINT_TIME c=19
2021-03-31 07:16:36 +02:00
7a88ce89e4
Update MSG_TEMPERATURE c=18
2021-03-31 07:11:01 +02:00
c0df79d39a
Define #MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
2021-03-31 07:10:03 +02:00
7268f6a824
Define #MSG_SELECT_FILAMENT c=20
2021-03-31 07:08:09 +02:00
2e43234d3f
Update #MSG_SUPPORT c=18
2021-03-31 07:06:46 +02:00
ba38262109
Update #MSG_STATISTICS c=18
2021-03-31 07:05:28 +02:00
960ebac02d
Update #MSG_SPEED c=15
2021-03-31 07:04:47 +02:00
b52d87e9a5
Define #MSG_Z-LEVELING_ENFORCED c=20 r=4
2021-03-31 07:02:42 +02:00
acbdc2ac8d
Define #MSG_RUNOUTS c=7
2021-03-31 06:59:16 +02:00
09f4850a8a
Define #MSG_SLIGHT_SKEW c=13, #MSG_SEVERE_SKEW c=13
2021-03-31 06:53:04 +02:00
4749dd1750
Define #MSG_CHECK_IR_CONNECTION c=20 r=4
2021-03-31 06:46:43 +02:00
bd8ab39b39
Define #MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
2021-03-31 06:45:33 +02:00
5280a89fba
Define #MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
2021-03-31 06:43:21 +02:00
0d48a32e87
Define #MSG_RESUME_NOZZLE_TEMP c=20 r=4
2021-03-31 06:41:17 +02:00
4f394c8c5a
Update #MSG_TUNE c=18, #MSG_PREHEAT c=18
2021-03-31 06:38:50 +02:00
fbecae1707
Update MSG_PREHEAT c=18
2021-03-31 06:38:06 +02:00
ac810bf03a
Define #MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
2021-03-31 06:36:28 +02:00
00b100bf26
Define #MSG_NOZZLE_FAN c=10, #MSG_PRINT_FAN c=10
2021-03-31 06:30:00 +02:00
baf231b0f1
Update MSG_NO_CARD c=18
2021-03-31 06:23:18 +02:00
1c09e8411d
Define #MSG_PINDA c=6 and remove duplicate saved 8 bytes
2021-03-30 19:30:26 +02:00
6a266d497b
Define #MSG_REMOVE_TEST_PRINT c=20 r=4
2021-03-30 19:19:43 +02:00
5fcc731be1
Define #MSG_INSERT_FIL c=20 r=6
2021-03-30 19:17:48 +02:00
243fa68745
Define #MSG_LIN_CORRECTION c=18
2021-03-30 19:16:11 +02:00
44f7be134d
Define #MSG_FS_VERIFIED c=20 r=3
2021-03-30 19:13:31 +02:00
bcdaecb46d
Define #MSG_TO_LOAD_FIL c=20, #MSG_TO_UNLOAD_FIL c=20, #MSG_PRESS_KNOB c=20
2021-03-30 19:10:56 +02:00
de9697b913
Define #MSG_PREHEATING_TO_LOAD/UNLOAD/CUT/EJECT c=20
2021-03-30 19:06:46 +02:00
d601355d40
Define #MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5, #MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
2021-03-30 19:01:24 +02:00
669ab0f7f7
Define #MSG_GCODE_DIFF_CONTINUE c=20 r=4, #MSG_GCODE_DIFF_CANCELLED c=20 r=7
2021-03-30 18:58:04 +02:00
e9750a7312
Update #MSG_FIL_FAILD c=20 r=5
2021-03-30 18:52:58 +02:00
4a5d7bc6b7
Define #MSG_Y_DIST_FROM_MIN c=20
2021-03-30 18:51:04 +02:00
2abdfeb4c5
Update #MSG_YES c=3
2021-03-30 18:48:14 +02:00
7f3fe6740b
Update #MSG_NO_MOVE c=20
2021-03-30 18:46:56 +02:00
1a1a1d88a7
Update MSG_MOVE_X/Y/Z c=18
2021-03-30 18:13:49 +02:00
c1f22a5239
Update #MSG_MOVE_AXIS c=18
2021-03-30 18:12:03 +02:00
99893d5066
Define #MSG_MMU_CONNECTED c=18
2021-03-30 18:11:22 +02:00
77a7a92a42
Define MSG_MMU_LOAD_FAILED c=20
2021-03-30 18:08:13 +02:00
4d9dffb042
Define #MSG_MEASURED_SKEW c=13
2021-03-30 18:06:43 +02:00
1e2dde9a52
Update #MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
2021-03-30 18:02:27 +02:00
afb7c82e26
Update #MSG_LOAD_TO_NOZZLE c=18
2021-03-30 18:00:20 +02:00
2408bc9f2e
Update MSG_LOADING_COLOR c=20
2021-03-30 17:58:51 +02:00
62ecbb3ae3
Update #MSG_BABYSTEP_Z c=18
2021-03-30 17:57:50 +02:00
50e69fcca8
Update #MSG_NO c=3
2021-03-30 17:53:58 +02:00
75c0de741b
Update #MSG_AUTO_DEPLETE c=13
2021-03-30 17:52:59 +02:00
ddf47a3cac
Update #MSG_NA c=3, #MSG_OFF c=3, #MSG_ON c=3
2021-03-30 17:51:31 +02:00
d1813890a8
Update #MSG_STOPPED c=20
2021-03-30 17:49:02 +02:00
a9ed513979
Update #MSG_STOP_PRINT c=18
2021-03-30 17:48:06 +02:00
46367c2a33
Update #MSG_STEALTH c=7, #MSG_SILENT c=7, #MSG_NORMAL c=7
2021-03-30 17:46:37 +02:00
3d848328ed
Update #MSG_AUTO_POWER c=10
2021-03-30 17:42:33 +02:00
8771519880
Update #MSG_HIGH_POWER c=10
2021-03-30 17:41:51 +02:00
afabfa789d
Update #MSG_MODE c=6
2021-03-30 17:41:09 +02:00
dc56b74263
Update #MSG_MODE c=9
2021-03-30 17:39:43 +02:00
2a08a6e441
Update #MSG_SELFTEST_WIRINGERROR c=17
2021-03-30 17:37:50 +02:00
e6ea843e62
Update #MSG_SELFTEST_MOTOR c=18
2021-03-30 17:36:39 +02:00
35b000faea
Update MSG_RESUMING_PRINT c=20
2021-03-30 17:34:36 +02:00
557486ee0b
Update MSG_REFRESH c=18
2021-03-30 17:34:00 +02:00
54f594238b
Update #MSG_NOZZLE c=12
2021-03-30 17:33:15 +02:00
a878056be3
Update MSG_BACK c=18
2021-03-30 17:32:04 +02:00
610ba9bc45
Update #MSG_CARD_MENU c=18
2021-03-30 17:31:18 +02:00
5eb14dc433
Update #MSG_MAGNETS_COMP c=13
2021-03-30 17:29:56 +02:00
12372d6525
Update #MSG_Z_PROBE_NR c=14
2021-03-30 17:28:43 +02:00
7e2c272839
Update #MSG_MESH c=12
2021-03-30 17:27:02 +02:00
bc8a23a0c6
Update #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY c=8
2021-03-30 17:25:35 +02:00
3367d7f8fa
Update #MSG_SD_CARD c=8
2021-03-30 17:24:45 +02:00
e8c3ba89dc
Update #MSG_MMU_MODE c=8
2021-03-30 17:23:29 +02:00
532c7438d8
Update #MSG_NOZZLE_DIAMETER c=10, MSG_GCODE c=8
2021-03-30 17:19:00 +02:00
0a634f7d48
Update #MSG_FIRMWARE c=8
2021-03-30 17:16:31 +02:00
39b8a35f3a
Update #MSG_MODEL c=8
2021-03-30 17:15:48 +02:00
5b843c3a4d
Update #MSG_STRICT c=8
2021-03-30 17:14:49 +02:00
f60ba6de87
Update #MSG_WARN c=8
2021-03-30 17:13:56 +02:00
b465c96327
Update #MSG_NONE c=8
2021-03-30 17:13:09 +02:00
cdcc06f376
SDFile - fix errorneous offset computation
...
... my fault, I was originally too optimistic about the overflow
Fixes #3077
PFW-1233
2021-03-30 11:33:42 +02:00
a251dcc14e
Merge pull request #3064 from 3d-gussner/PFW-1222
...
PFW-1222: Disable M120 M121
2021-03-30 10:09:47 +02:00
e76b0c40a8
Merge pull request #3066 from espr14/PFW-1223
...
Calibration: detect biased PINDA and retry calibration PFW-1223
2021-03-30 10:08:16 +02:00
c4f80642b3
Update #MSG_MAIN c=18
2021-03-30 09:52:52 +02:00
4417deb9ea
Update #MSG_SOUND_BLIND c=7, #MSG_SOUND_LOUD c=7, MSG_SOUND_ONCE c=7
2021-03-30 09:50:21 +02:00
e4ed1ffc17
Update #MSG_SOUND c=9
2021-03-30 09:46:20 +02:00
2ce5d3a840
Update #MSG_RPI_PORT c=13
2021-03-30 09:44:13 +02:00
2ca8a23e4a
Update #MSG_SORT_ALPHA c=8 #MSG_SORT_TIME c=8
2021-03-30 09:42:53 +02:00
c85ebb4aa3
Update #MSG_SORT c=7
2021-03-30 09:40:26 +02:00
440ec49a36
Update #MSG_SETTINGS c=18
2021-03-30 09:38:33 +02:00
6900c206cd
Define #MSG_SEL_PREHEAT_TEMP c=20 r=6
2021-03-30 09:36:32 +02:00
12dc48ff1a
Update #MSG_BELTTEST c=18
2021-03-30 09:34:41 +02:00
b697117654
Update #MSG_SELFTEST c=18
2021-03-30 09:33:49 +02:00
9bc702ae0a
Update #MSG_SELFTEST_OK c=20
2021-03-30 09:32:27 +02:00
00fedbb08a
Update MSG_LANGUAGE_SELECT c=18
2021-03-30 09:30:04 +02:00
164226c739
Define #MSG_RIGHT c=10
2021-03-30 09:29:07 +02:00
2daf1d9114
Define #MSG_LEFT c=10
2021-03-30 09:26:50 +02:00
169f8983b6
Define #MSG_ADDITIONAL_SHEETS c=20 r=9
2021-03-30 09:23:35 +02:00
a82ca3def4
Update #MSG_WATCH c=18
2021-03-30 09:21:50 +02:00
0139bb5a5e
Update #MSG_CHANGE_SUCCESS c=20
2021-03-30 09:20:57 +02:00
0e86ab88fd
Update #MSG_FILAMENTCHANGE c=18
2021-03-30 09:20:01 +02:00
9c0300df66
Update #MSG_HEATING c=20
2021-03-30 09:18:11 +02:00
280a3c4d3a
Update #MSG_PRUSA3D_HOWTO c=18
2021-03-30 09:16:14 +02:00
12bd2f1a09
Update #MSG_PRUSA3D c=18
2021-03-30 09:15:21 +02:00
4e4fb7a59f
Update #MSG_PRUSA3D_FORUM c=18
2021-03-30 09:14:20 +02:00
10c586b577
Update #MSG_FLOW c=15
2021-03-30 09:13:09 +02:00
db07d55c29
Define #MSG_MMU_FIX_ISSUE c=20 r=4
2021-03-30 09:11:19 +02:00
7c9891d85e
Update #MSG_FSENSOR c=12
2021-03-30 09:09:11 +02:00
7a99f63ffd
Define #MSG_FAIL_STATS c=18
2021-03-30 09:06:59 +02:00
d427563e2b
Define #MSG_MMU_FAIL_STATS c=18
2021-03-30 09:05:18 +02:00
1b4241f031
Update #MSG_ERROR c=10
2021-03-30 09:03:38 +02:00
1b8ca77b0c
Define #MSG_MMU_CUTTING_FIL c=18
2021-03-30 09:01:58 +02:00
b6031c02a8
Update #MSG_DISABLE_STEPPERS c=18
2021-03-30 08:59:27 +02:00
69b9acdfc1
Define #MSG_CRASH_RESUME c=20 r=3
2021-03-30 08:57:42 +02:00
411caddc55
Define #MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
2021-03-30 08:14:46 +02:00
2d2dc23e81
Define #MSG_CALIBRATING_HOME c=20
2021-03-30 08:12:20 +02:00
c8af50d344
Define #MSG_COPY_SEL_LANG c=20 r=3
2021-03-30 08:09:08 +02:00
71638b49fc
Update #MSG_COOLDOWN c=18
2021-03-30 08:05:54 +02:00
5f9b66a23a
Update #MSG_NOT_COLOR c=19
2021-03-30 08:04:39 +02:00
02ff05639b
Define MSG_CHECKING_FILE c=17
2021-03-30 08:01:26 +02:00
f2298b1a46
Update #MSG_SD_REMOVED c=20
2021-03-30 07:57:42 +02:00
1e2f5c8323
Update #MSG_MENU_CALIBRATION c=18
2021-03-30 07:55:19 +02:00
3733c42d38
Update #MSG_HOMEYZ_DONE c=20
2021-03-30 07:54:11 +02:00
79aa6b198d
Update #MSG_HOMEYZ c=18
2021-03-30 07:52:24 +02:00
fa0382fd3e
Update #MSG_CALIBRATE_BED c=18
2021-03-30 07:50:54 +02:00
2985c6bd6b
Update #MSG_BED c=13
2021-03-30 07:49:37 +02:00
7c906dd0b1
Update #MSG_BED_CORRECTION_MENU c=18
2021-03-30 07:44:16 +02:00
4d464b79f4
Update MSG_BED_HEATING c=20
2021-03-20 17:30:44 +01:00
3ee23af7b7
Update MSG_BED_DONE c=20
2021-03-20 16:04:52 +01:00
ba0f2b2501
Update MSG_LOOSE_PULLEY c=20
2021-03-20 07:11:41 +01:00
3fcc81ebdb
Update MSG_SELFTEST_ENDSTOP c=16
2021-03-20 07:11:07 +01:00
17df4e1c8d
Update MSG_SELFTEST_ENDSTOPS c=20
2021-03-20 07:10:09 +01:00
4a6c53daf8
Update MSG_SELFTEST_PLEASECHECK c=20
2021-03-20 07:09:33 +01:00
b3d3feef4d
Update MSG_SELFTEST_ERROR c=20
2021-03-20 07:08:48 +01:00
5d167ce813
Update MSG_SELFTEST_NOTCONNECTED c=20
2021-03-20 07:08:20 +01:00
625604d704
Update MSG_SELFTEST_HEATERTHERMISTOR c=20
2021-03-20 07:07:14 +01:00
b86ad11b68
Update MSG_SELFTEST_BEDHEATER c=20
2021-03-20 07:06:37 +01:00
b3b062e4ba
Update MSG_SELFTEST_SWAPPED c=16
2021-03-20 07:05:47 +01:00
b6684f6114
Update MSG_SELFTEST_AXIS c=16
2021-03-20 07:05:03 +01:00
bc9f6b6ae6
Update MSG_SELFTEST_AXIS_LENGTH c=20
2021-03-20 07:03:47 +01:00
83cbfda113
Update MSG_AUTO_HOME c=18
2021-03-20 07:02:43 +01:00
fe1b4e50be
Update MSG_AMBIENT c=14
2021-03-20 06:59:54 +01:00
178fe36dc7
Create MSG_CANCEL c=9
...
Delete ">Cancel"
Samed 10 bytes
Updated MSG_MEASURED_OFFSET c=20
2021-03-20 06:30:26 +01:00
1c965cd988
Update MSG_MEASURED_OFFSET c=20
2021-03-20 06:18:41 +01:00
92acac453f
Update MSG_MMU_POWER_FAILS c=15
2021-03-20 06:16:11 +01:00
2a848923ea
Update MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
...
as Dutch translation is longer
2021-03-19 18:50:29 +01:00
baabc0bd1e
Fix typo "didnt" to "didn't"
2021-03-19 18:49:13 +01:00
b806c017cb
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
...
as Polish translation is longer
2021-03-19 18:47:58 +01:00
542ff58529
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
...
as Polish translation is longer
2021-03-19 18:47:09 +01:00
147fddd060
Update MSG_CALIBRATE_BED_RESET c=18
2021-03-19 18:41:01 +01:00
6300211268
Update MSG_PLACE_STEEL_SHEET c=20 r=5
...
as Italian translation is longer
2021-03-19 18:37:23 +01:00
79a148bb14
Update #MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
...
as Italian translation is longer
2021-03-19 18:34:39 +01:00
9e60953d44
Update "G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
...
as French translation is longer
2021-03-19 18:14:03 +01:00
a09f2c2f2d
Update "G-code sliced for a newer firmware. Continue?"
...
as French translation is longer
2021-03-19 18:12:16 +01:00
41022d7d60
Update "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
...
as French translation is longer
2021-03-19 18:07:04 +01:00
813aabab56
Update "Select nozzle preheat temperature which matches your material." c=20 r=6
...
as Spanish translation is longer
2021-03-19 18:03:06 +01:00
d52a7326be
Update "Please insert filament into the extruder, then press the knob to load it." c=20 r=6
...
as German translation is longer
2021-03-19 17:55:03 +01:00
cc29a9485e
Update "If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets." c=20 r=9
...
as German translation is longer
2021-03-19 17:52:54 +01:00
03a13ace5a
Update "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled." c=20 r=9
...
as French translation is longer
2021-03-19 17:47:35 +01:00
17c015f5c0
Update "Printer nozzle diameter differs from the G-code. Continue?" c=20 r=5
2021-03-19 17:44:07 +01:00
ba9e26f444
Update #MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
2021-03-19 17:37:24 +01:00
1bba2255c1
Update MSG_WAITING_TEMP c=20 r=4
2021-03-19 17:34:15 +01:00
bab4994b89
Update #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=2
2021-03-19 16:52:24 +01:00
6a54196862
Update "Now remove the test print from steel sheet." c=20 r=4
2021-03-19 16:42:21 +01:00
Yuri D'Elia
D.R.racer
Panayiotis-git
DRracer
Voinea Dragos
3d-gussner
Marek Bel
DESKTOP-AFI832L\admin