ebf6d08fae
Crash detection - message on lcd (PFW-115)
2018-01-12 21:02:49 +01:00
0f46fa0c37
blocking messages in settings/tune menu (PFW104)
...
switch normal/stealth (PFW110)
2018-01-12 19:54:32 +01:00
f1c741d027
Filament autoloading improved and minor tweaks
...
Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading)
Autoloading now unable to turn on when filament sensor is turned off or not responding
Color not right changed to color not correct to avoid slight confusion
2017-12-28 18:59:57 +01:00
5e5588c72c
Text grooming
...
Added language mutations of error messages, menu items.
Synced wording of crash detection in messages.
rPi port -> RPi port.
Minor menu items alignment.
2017-12-28 15:45:52 +01:00
e064133a04
Merge remote-tracking branch 'upstream/MK3' into MK3
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2017-12-28 01:37:13 +01:00
69d496e157
autoload filament menu (PFW-95, PFW-96)
2017-12-27 21:57:51 +01:00
cbd7f033e8
crashdetection and mode menu (PFW-85, PFW-97)
2017-12-27 21:43:04 +01:00
f227952c0b
Merge branch 'MK3' into MK3
2017-12-21 00:07:01 +01:00
17d9bb205a
selftest tests filament sensor, selftest messages have language variants
2017-12-20 23:40:18 +01:00
a3a0e70eeb
Fsensor autoload enabled menu and eeprom variable
2017-12-20 22:29:41 +01:00
011ebb3675
selftest is checking if fans are swapped, host keepalive messages added
2017-12-14 19:36:32 +01:00
f8e3c76315
merging new changes from upstream/MK3
2017-12-12 17:14:48 +01:00
7204e91ec6
Filament sensor not responding - (PFW-41)
...
build number = 130
2017-12-11 18:17:25 +01:00
1c61f2f29c
First working version
2017-12-11 11:30:49 +01:00
868aacc7d5
turn on second serial line from settings menu
2017-12-08 16:56:06 +01:00
44218a1b53
incomplete file check ported from MK2: initial version
2017-12-06 14:55:53 +01:00
020a7ec257
unload filament can be repeated
2017-11-28 19:04:43 +01:00
c0112f05e1
M600: wait for user before unloading filament
2017-11-28 18:28:53 +01:00
3f7be78997
translation to Czech language added
2017-11-27 18:54:44 +01:00
67a2e0a706
settings menu updated
2017-11-27 17:01:01 +01:00
f075711e64
corrected menus
2017-11-27 16:37:46 +01:00
044ed951cb
translations to czech language and menu corrections: initial version
2017-11-27 16:06:34 +01:00
4dae6f871e
Sg load meassurement durring self test - 'Belt status'
2017-11-27 04:46:58 +01:00
213ee43cc9
Merge usptream
...
Crashdetection fixed
pl language removed (because of low flash capacity)
build number = 110
2017-11-22 08:41:52 +01:00
9e2533ecdf
Support menu translated and fixes, snmm M600 long beep fix
2017-11-14 16:10:10 +01:00
ee5505887c
First layer cal. corrections, translations to all languages for Wizard MK2 added
2017-11-13 17:43:14 +01:00
eda0c6bd39
english version of xyz: place/remove steel sheet; wait for cooling down removed,
2017-11-13 17:09:26 +01:00
fbbcc27f1a
X max lowered to 250, XYZ/Z calibration: Z top coordinate changed, changes in xyz cal. because of stell sheet, still not final version
2017-11-12 11:30:06 +01:00
e88ac72cc8
missing messages added
2017-11-07 16:57:52 +01:00
2e68770e62
initial version - messages missing (will not compile)
2017-11-07 16:49:04 +01:00
d2ff47dac8
Crashdetection
2017-09-22 23:06:52 +02:00
f5e39112a2
Language files (EN only), because of flash overflow.
2017-09-22 17:42:53 +02:00
4cae00741e
MAKER FAIRE
...
filament sensor: runout detection tuning, save/restore print
silent mode: safe mode selection durring printing and after homing
2017-09-21 01:52:28 +02:00
d63045fdb3
TMC2130 stallguard improovment - axis load monitoring, autocalibrate Z.
2017-08-21 13:06:17 +02:00
ea17fa56d7
Merge remote-tracking branch 'origin/MK3-michal' into MK3-michal
...
# Conflicts:
# Firmware/ultralcd.cpp
2017-07-07 05:00:23 +02:00
e23f34339e
Power panic improved by turning off Z steppers
...
Dubug outputs for filament and fan rotation sensors moved to special menu Support->Extruder info
XYZ calibration debug now available only while not printing
2017-07-07 04:50:00 +02:00
c1f6646d08
Merge pull request #16 from XPila/MK3
...
pat9125 filament sensor
2017-07-07 04:46:45 +02:00
ec7678a25f
pat9125 filament sensor
...
sg homing - bug fix + homing multiple axes simultanously (AXIS_MASK)
2017-07-07 04:45:09 +02:00
e521831245
status message during print recovery
2017-07-06 19:31:18 +02:00
54ef2936c7
selftest
2017-07-06 13:19:11 +02:00
c4be651d2b
uvlo initial version
2017-07-01 18:51:02 +02:00
43d696659f
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
3faef75a0d
3.0.10 sync
2017-03-24 19:47:50 +01:00
50a0ca8519
Italian translations.
2016-09-01 14:10:41 +02:00
25024d8975
Added Spanish translations.
2016-09-01 14:07:27 +02:00
25b4675823
Updated Polish texts.
2016-09-01 13:13:21 +02:00
930ed11e90
Updated texts.
2016-09-01 11:19:32 +02:00
26405ee16f
Syncing with 3.0.7 public
2016-08-31 17:12:05 +02:00
307d17422d
3.0.6 sync
2016-08-11 10:42:53 +02:00
30f0528aba
Initial commit
2016-07-22 15:28:01 +02:00
Robert Pelnar
Michal Průša
PavelSindler
PavelSindler
michalprusa
bubnikv