ed93f1b7f0
preHeat @ filament management
...
another funcionality IIb
2019-02-21 15:27:22 +01:00
a54c68b874
preHeat @ filament management
...
another funcionality II
2019-02-21 04:45:44 +01:00
da0867cfc5
preHeat @ filament management
...
another funcionality
2019-02-20 03:01:33 +01:00
11d19879fc
Merge pull request #1533 from MRprusa3d/PFW-210
...
preHeat @ filament load / unload / autoLoad / MMU
2019-02-15 17:45:38 +01:00
9d76b6912c
merge new changes from upstream
2019-02-15 17:05:39 +01:00
69ff37729e
whitespace
2019-02-15 14:19:30 +01:00
0f791ce47f
mmu needs attention: idler error fix
2019-02-15 14:17:47 +01:00
80c3420a12
Merge branch 'MK3' into PFW-210
2019-02-14 00:05:50 +01:00
ef1f82627e
preHeat @ filament load / unload / autoLoad / MMU
...
MMU options added
2019-02-13 23:53:00 +01:00
a5437cb15b
Resend MMU T commands only.
...
This solves problem with unload repeated if unload takes too long, second ok reply then triggers Wait end and resumes print.
2019-02-13 22:29:29 +01:00
a4032e437e
Add MMU wait command after MMU load failed. Resume print when MMU wait command returns OK.
2019-02-13 21:28:21 +01:00
daaec0ef04
Convert MmuCmd to enum class.
2019-02-13 17:12:35 +01:00
8e23e7f322
Save some flash by using smaller type for filament.
2019-02-13 16:37:54 +01:00
9e873ac0f7
Use enum for mmu_cmd instead of plain integer type.
2019-02-13 01:51:39 +01:00
bb7eeef1f4
Define debug printf and puts functions to make code more readable.
2019-02-12 23:24:23 +01:00
e1216934ef
Save flash by defining underlying type and omitting number value.
2019-02-12 21:53:11 +01:00
3379fb4866
Convert mmu_state to enum.
2019-02-12 21:43:26 +01:00
6c8d9c6fb4
Retry filament load on MMU load failure once.
2019-02-11 23:43:42 +01:00
d33b24c281
Unload filament after MMU load failed so MMU unit can be controlled by its buttons.
2019-02-11 23:24:55 +01:00
9926468c91
Merge remote-tracking branch 'upstream/MK3' into variants
2019-01-30 17:26:45 +01:00
83510ed489
check_for_ir_sensor
2019-01-28 17:27:16 +01:00
eea755496b
Conditional translation for SYSTEM_TIMER_2 because we want to have posibility to switch between old/new implementation.
...
Timing functions (millis, micros and delay) replaced in whole source, defined in Marlin.h.
This commit enables original implementation (SYSTEM_TIMER_2 undefined)
Verified with passed complete wizard process.
2019-01-27 22:48:51 +01:00
434a723151
Timing functions 'micros' and 'delay' replaced in whole source with 'micros2' and 'delay2'
2019-01-27 17:37:27 +01:00
fc1491670f
mmu_idler_sensor_detected -> ir_sensor_detected
2019-01-25 18:03:05 +01:00
6b6a3d7d5f
MMU_IR_SENSOR_PIN -> IR_SENSOR_PIN
2019-01-25 18:01:17 +01:00
7e3a1c7d45
merge changes from upstream
2019-01-25 17:57:24 +01:00
661c40ef75
Merge pull request #1472 from mkbel/IR_fsens_selftest
...
Ir fsens selftest
2019-01-25 13:14:18 +01:00
f4e5c729ac
Merge pull request #1451 from mkbel/Tx_fix
...
Tx fix
2019-01-24 13:41:43 +01:00
e0c1e4a02d
version which should on all printer versions: autoload, selftest, filament detection, filament sensors initialization, filament menus
2019-01-24 01:12:30 +01:00
c371a5ea65
Document.
2019-01-22 14:05:08 +01:00
a92d9c782b
Add IR sensor test.
2019-01-22 11:29:55 +01:00
ca8cb3784c
Merge pull request #1456 from mkbel/Fix_load_fail_current
...
Do not disable motor currents when print is paused due to mmu load er…
2019-01-16 12:49:38 +01:00
3af1f81269
Do not disable motor currents when print is paused due to mmu load error.
2019-01-15 21:40:02 +01:00
d09ff5c3e7
Remove commented out code.
2019-01-15 01:30:54 +01:00
3b175459b1
Fix filament loaded to far and MMU idler never disengaged after Tx command on printer with idler sensor.
2019-01-15 01:28:51 +01:00
2db42c8577
Merge branch 'MK3' into auto_deplete_2
2019-01-07 21:39:46 +01:00
7946cd7250
eeprom write nr. limitation
2019-01-04 22:23:11 +01:00
02262ff7ca
mmu load fail: possibility to unload/eject filament from menu
2019-01-04 21:37:19 +01:00
d89c03a0f1
Documentation.
2019-01-04 21:26:13 +01:00
1a219b2372
Mark filament as depleted when detected by MMUv2 FINDA. Do not try to load filament if it is marked depleted, load next filament instead. Force user action when all filaments are marked as depleted.
2019-01-04 21:11:42 +01:00
b7b7e9387f
do resend attempts before pausing print (mmu needs attention state) so the print would not be paused if T-code is not received correctly by mmu; prevent infinite loading
2019-01-04 21:07:52 +01:00
88441f7f2f
scan power failures fix
2018-12-21 23:07:39 +01:00
6ba86acebc
send A (abort) command to mmu only when loading phase of T-code
2018-12-21 22:33:01 +01:00
ba57986b72
merge changes from upstream
2018-12-21 20:58:38 +01:00
5462d451e1
show power failures in fail stats menu, shorter load to nozzle if idler sensor detected
2018-12-21 20:56:45 +01:00
d292e877df
load to nozzle shortened, sensor menu moved to support
2018-12-21 18:51:13 +01:00
3c64bad1cb
initial version which works on old and new hw, initial version of idler sensor detection
2018-12-21 17:12:16 +01:00
75d31fd2cb
Repeat last MMU command after timeout
2018-12-18 18:47:54 +01:00
4543949cac
build without MMU_IDLER_SENSOR_PIN defined
2018-12-18 17:29:44 +01:00
fc33affbda
temporary change
2018-12-18 17:24:29 +01:00
MRprusa3d
PavelSindler
PavelSindler
MRprusa3d
Marek Bel
Robert Pelnar