fbca8cbe28
Remove unrelated (but still missing) translations
...
This needs to be fixed in 3.10 final. Rumors say some of the translation
scripts even fail on a message containing both % and a backslash
2021-02-23 15:31:36 +01:00
076613fd97
Show `Fil. sensor` in Support::Sensor info only if IR Sensor detected
2021-02-23 15:20:08 +01:00
08a6a4b25e
Enable Filament sensor action during print even if in Support::Sensor info
2021-02-23 15:19:03 +01:00
734e497cd0
Move wizard msgs into messages.h/c + add more translation markers
2021-02-23 15:09:19 +01:00
95567b8072
Update translations of the Shipping/Service prep welcome msg
2021-02-23 11:10:18 +01:00
fdff5d84b2
Move Filament sensors to Support -> Sensor Info
2021-02-23 08:52:40 +01:00
8d4176a530
Add "Fan check [On|Off]" menu to tune
...
User can en/disable the fan check during print. This is very useful in case of false positive
fan errors to let the user to decide to finish print with "faulty" fan.
2021-02-23 07:24:33 +01:00
30b60e44d2
`|| isPrintPaused` is already in `PRINTER_ACTIVE`
2021-02-22 18:21:20 +01:00
fd154e4b69
Again revert Settings
2021-02-22 18:10:43 +01:00
5894883324
Fix USB/host FAN Error resume
...
Show Settings during Pause also for USB/host prints
2021-02-22 16:37:01 +01:00
9110ffd4ae
Revert `M602`
2021-02-22 16:36:21 +01:00
cbe207eb59
Fix issue #3037
...
`starttime` is only set for SD prints via gcode `M24 and M32`
2021-02-20 13:18:53 +01:00
461d3f6749
Remove duplicate function is_buffer_empty()
...
Use cmd_buffer_empty() instead
2021-02-19 17:06:00 +01:00
87f416f303
Keep wizard flag==2 even when a user restarts during Z-calibration
...
i.e. prevent jumping into the standard wizard if reset during Z-
calibration
2021-02-18 15:39:29 +01:00
495dcee066
Show LCD Settings during pause
2021-02-18 12:09:43 +01:00
4c8ba11417
Merge remote-tracking branch 'upstream/MK3' into MK3_MK404
2021-02-18 11:39:36 +01:00
5df06a64fd
Merge branch 'MK3_MK404' of https://github.com/3d-gussner/Prusa-Firmware into MK3_MK404
2021-02-18 11:38:03 +01:00
a109d20506
Merge remote-tracking branch 'upstream/MK3' into PFW-1174
...
Fix merge issues
2021-02-18 11:05:31 +01:00
c1d8e6660b
Indentations
2021-02-18 10:07:40 +01:00
adf347fdf1
Merge pull request #3034 from 3d-gussner/MK3_PFW-960
...
PFW-960 Improve M0/M1/M117
2021-02-18 09:59:01 +01:00
291ee8e46d
Indentations
2021-02-18 09:53:14 +01:00
75a385d614
Indentations
2021-02-18 09:10:28 +01:00
4e768057e7
Use standard wdt_reset() from AVR lib
...
which translates to the one `wdr` instruction like before
+ wrap configuration of watchdog into cli/sei
2021-02-17 15:59:52 +01:00
2b4cf8d56e
Fix FANCHECK build error
2021-02-17 13:52:31 +01:00
a456c4a52d
Make watchdogReset() force_inline
...
It makes no sense keeping watchdogReset as a separate function which
must be called, since it only contains one instruction: "wdr".
Not only was the code larger by 32 bytes in total, but also much slower
(call+ret take 4 cycles together for no reason in this case).
Surprisingly, doing just this on FW 3.9.3 solves issue #2954 on the one
affected EINSY board, even though it makes not much sense (there must be
some other timing issue).
2021-02-17 13:04:46 +01:00
c3bea4d71c
Make a special welcome message for shipping/service prep
...
Another request from our Service dept. - the user shall be prevented
from skipping the intro wizard, because otherwise some preset/calibrated
features will look like not done - especially live-z calibration.
And since there are users, who send a machine to service to perform 1st
layer calibration only, they must not omit the Z-calibration at the
start after shipping.
2021-02-17 12:53:56 +01:00
c79bce010d
Don't show Settings during pause
2021-02-17 12:18:30 +01:00
7a84ad71dc
Merge pull request #3023 from DRracer/service-prep
...
Add Service prep. item into Factory reset
2021-02-17 10:43:08 +01:00
dbb0269bd4
Make indentation consistent with surrounding code in factory_reset()
2021-02-17 08:27:49 +01:00
afc15b42bb
Indentations
2021-02-17 08:13:32 +01:00
59c2b7e795
Fix Fan error issues.
2021-02-17 07:42:12 +01:00
66ea1bdfba
Indentations
2021-02-16 12:31:23 +01:00
d6c6517fcd
Back to Status after Resuming
2021-02-16 07:27:46 +01:00
c2637d9430
Documentation Show Main Menu
2021-02-15 18:35:04 +01:00
c07bcd172a
Fix NO Stop print during MBL
2021-02-15 18:34:08 +01:00
583993b7e2
Back to "Status" after gcode `M0/M1`
2021-02-15 15:25:04 +01:00
25928232e4
Merge remote-tracking branch 'upstream/MK3' into MK3_PFW-960
2021-02-15 13:06:47 +01:00
9071a9f8fd
Gcode `M1` must have a string while `M0` it is optional
...
As the `M0/M1` moved to the beginning of the parser
- parser would not be able to "find" `M1nn` command if the query was `M1` instead of `M1 `
- to be able to "stop/halt" without sending a string and display default message use gcode `M0`
- as there are no `M0nn` gcodes the parser can query `M0` without additional space needed as in `M1 `
2021-02-15 12:51:12 +01:00
fc270a356a
Fix indentations
2021-02-15 12:50:40 +01:00
1550e707be
Fix few issues
...
Create MMU2 SDcards
MMU2 only for MK3/S
2021-02-15 11:41:41 +01:00
bf33198866
Add copy of MK3 and MK3S `lang.bin` files to MK404 `*_xflash.bin`
...
Minor changes:
- Indentations
- Documentation
2021-02-15 11:41:41 +01:00
be9f8e5157
Add force recompile
...
Added SD card builds
2021-02-15 11:41:41 +01:00
de337476cd
Add MK404 support
...
Indentations
2021-02-15 11:41:41 +01:00
86e117679c
Merge pull request #3011 from 3d-gussner/MK3_translation_0121
...
Fix few translations introduced with #2982
2021-02-15 11:16:54 +01:00
2874e704f5
Merge pull request #3021 from 3d-gussner/PFW-910
...
PFW-910 Add remaining time to change/pause/user interaction to LCD Info screen
2021-02-15 09:13:50 +01:00
3ad669889e
Fix few issues
...
Create MMU2 SDcards
MMU2 only for MK3/S
2021-02-14 00:18:24 +01:00
f37aedd5dd
Add copy of MK3 and MK3S `lang.bin` files to MK404 `*_xflash.bin`
...
Minor changes:
- Indentations
- Documentation
2021-02-13 10:35:34 +01:00
fb98cb2ff9
Add force recompile
...
Added SD card builds
2021-02-13 10:05:07 +01:00
b663abf160
Add MK404 support
...
Indentations
2021-02-12 20:12:37 +01:00
c95a8e13d7
Fix indentations to 4 spaces per tab
2021-02-12 11:47:02 +01:00
D.R.racer
3d-gussner
Yuri D'Elia
DRracer