44f9b953c5
remove unused step parameter in lay1cal sqaure
2024-11-18 09:51:02 +01:00
a0278b2844
Fix an issue where MMU unloads filament while its cooling down
...
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2024-11-18 09:45:51 +01:00
7e119f733f
Implement variant of enquecommand which accepts format string
...
This eliminates many local buffers
Change in memory:
Flash: -450 bytes
SRAM: 0 bytes
2023-04-05 09:10:39 +02:00
620b19bbab
Roll up lay1cal_square loops
2023-02-17 14:30:20 +01:00
8129a14f19
Move layer calibration finish commands into first_layer_cal.cpp
2023-02-17 14:30:20 +01:00
568eec5ee0
Implement first layer cal with calculated extrusion widths
2023-02-17 14:30:20 +01:00
85d27e6e5e
Address 3 different start scenarios 1st lay cal + MMU
...
This PR tries to address the 3 different startup scenarios for 1st layer calibration with the MMU:
- 1st lay cal started with correct filament already loaded in the nozzle - we should continue, but skip the first 58mm (first 2 g-codes in the hard coded sequence) of purge line extrusion
- 1st lay cal started with other filament already loaded in the nozzle - we should unload and then issue a toolchange with no extra unload
- 1st lay cal started without loaded filament - we should just do a toolchange with no extra unload
PFW-1457
2022-12-30 15:04:45 +01:00
43705aae2e
Rename lay1cal_preheat() to lay1cal_wait_preheat().
2019-09-12 00:19:20 +02:00
170c1ea866
Split first layer calibration load filament and intro line into separate steps. If load fails, pause print apparently flushes command buffer and intro line is not printed after issue is resolved.
2019-08-16 20:47:55 +02:00
2755a3733d
Document.
2019-06-12 14:15:58 +02:00
d528a53526
Refactor. Move lcd_commands_func1() to first_lay_cal.cpp and rename it to lay1cal_square(). Remove its constant parameters. Move remaining G1 code to lay1cal_meander(). Saves 6B of FLASH memory.
2019-06-12 01:36:48 +02:00
47a183e96e
Use loop to enquecommand_P() in first layer calibration. Save 126B of FLASH memory.
2019-06-11 19:49:56 +02:00
4effff9e99
Use loop to enquecommand_P() in first layer calibration. Save 10B FLASH memory.
2019-06-11 18:56:29 +02:00
0c9121e99e
Use loop to enquecommand_P() in first layer calibration.
2019-06-11 17:08:56 +02:00
27145204ed
Use internationalized M117, but anyway the text is not shown.
2019-06-10 21:40:12 +02:00
4be8fa701e
Use loop to enquecommand_P() in first layer calibration.
2019-06-10 20:41:18 +02:00
Alex Voinea
gudnimg
Giles Bathgate
D.R.racer
Marek Bel