9454f9d8ec
Rename w25x20cl to xflash
2021-04-06 10:16:47 +02:00
6d7d9089f7
Add defines and templates for community languages
...
Add `Community made` submenu to `Select language`
2021-03-01 08:22:43 +01:00
6d476d7144
Still use SWI2C on RAMBo10a boards
...
The wiring for the PAT9125 on RAMBo10a boards is not directly connected
to the SCL pin and requires the sw mode.
Detect this requirement by checking the definition for the SWI2C_SCL pin
in the board definition.
Remove SWI2C_SCL/SDA from the other boards to use the HW mode.
2020-09-27 14:29:07 +02:00
d8a8837938
Document the 3 possible modes
2020-08-25 11:32:05 +02:00
240dc1132e
Include initial implementation based on Arduino's twi
2020-08-20 15:34:46 +02:00
502bc8c72d
Isolate more pat9125 code
...
Remove probing from Marlin_main and move it into pat9125_probe so that
it can support the various variants.
2020-08-20 15:34:46 +02:00
65228a046e
Merge pull request #2520 from MRprusa3d/PFW-x001bPR
...
FS PCB auto-detect
2020-03-26 17:36:18 +01:00
34ac2917ae
fix. warning "Macro expansion producing 'defined' has undefined
...
behavior"
update screen layout comments
2020-03-26 14:40:47 +01:00
2a9504b20a
!!! for testing only !!!
...
filament sensor auto-detection
2020-03-02 19:07:23 +01:00
ec5e54de25
state fixing
2020-03-02 17:52:25 +01:00
e84f82a675
Rewrite filament sensor PAT9125 error handling
...
Rewrite the logic behind the "chunking"/error count behind the PAT9125.
Basic idea: check the _direction_ of movement returned by the optical
sensor and compare it to the direction of the stepper. To avoid doing
this continuosly (and because the optical sensor doesn't necessarily
have the accuracy to track small distances), do so in chunks.
Each time a chunk doesn't match the expected direction, increase the
error count.
Several improvements were done to the previous code:
- Increase the chunk window: this ensures that a filament with
poor response returns an usable direction, while also moving the
average return values from the sensor in the middle of the 12 bits
available for maximum effectiveness.
- Since the returned values are more reliable, reduce the error count
(1.25mm*4 = ~5mm before runout detection)
- Track _both_ positive and negative movement, although only trigger
errors during extrusion (necessary due to several assumptions made
in the mmu/unloading code)
- Do not reset the counters for each block: accumulate distances
correctly, allowing detection of any block lenght.
2020-02-06 14:37:46 +01:00
0e1d559f03
Merge branch 'MK3' into PFW-943
2019-09-16 15:29:28 +02:00
011468598e
IR sensor gen. II
...
disconnected PCB detection
2019-09-16 00:43:37 +02:00
d408fd2f42
Update reserved space bytes as mentioned in
...
https://github.com/prusa3d/Prusa-Firmware/pull/2170#pullrequestreview-284810840
2019-09-06 15:54:04 +02:00
3ba2197dd3
more space for the second lang
2019-09-06 08:37:59 +02:00
6495a8fa58
Decrease flash reserved for secondary language.
2019-05-14 16:10:04 +02:00
fa1bdd6ab1
Lang - decreased reserved space for secondary language (10496 bytes)
2019-05-06 17:29:47 +02:00
41a827fa00
Removed unused texts, increased reserved space to 0x2e00 (11776 bytes)
2019-05-06 17:24:06 +02:00
3852aa4275
Different secondary language reserved space for MK3 and MK25
2019-04-30 12:42:18 +02:00
e8e7fa907f
Change comment
2019-04-24 15:52:24 +02:00
1d8b2b3e18
Secondary language reserved space resized
2019-04-24 15:22:17 +02:00
38dacaf07a
Automate secondary language support build.
2018-11-26 20:24:24 +01:00
2dc5439069
Lang - reserved space increased to 0x2f00 (12032 bytes)
2018-11-21 14:57:20 +01:00
1bff138b50
Lang - sec.lang. reserved space increased to 0x2e00 (11776 bytes)
2018-11-21 14:52:14 +01:00
7e9eaf0f4b
New lang, arduino 1.8.5 - disable multilanguage support by default
2018-10-23 17:32:52 +02:00
3e84bf6341
Lang update (translation + increased reserved space)
2018-09-12 02:45:13 +02:00
4ca300bc39
Lang update, french translation
...
+resized reserved space
2018-09-11 03:43:05 +02:00
60b4db15e0
FSensor - M600 fix + cond. translation + tunning filter and params
2018-07-22 16:14:13 +02:00
b35a212d15
PAT9125 optimalization (rewrited to C, 8bit sampling)
2018-07-12 18:11:07 +02:00
410e911364
SWI2C for PAT9125 simplified/optimized
2018-07-12 17:55:38 +02:00
febca066f2
New ML support - multiple languages in internal flash (MK25/MK2)
2018-06-23 01:31:38 +02:00
296f3ab23a
New ML support - resized reserved space, skip optiboot durring sec_lang update process
2018-06-14 23:07:54 +02:00
f162fce7a7
New ML support - fixed menu + resized reserved space
2018-06-14 22:46:01 +02:00
c25fec9f0a
New ML support
...
printf float library enabled - platform.txt must be modified!
+flash usage optimalization - printing to serial line
current flash usage: 253206bytes (MK3 + ML support)
platform.txt original line 20:
compiler.c.elf.flags=-w -Os -Wl,--gc-sections
platform.txt modified line 20 (enable printf float library)
compiler.c.elf.flags=-w -Os -Wl,-u,vfprintf -lprintf_flt -lm -Wl,--gc-sections
2018-06-10 20:04:25 +02:00
076258ff99
New ML support - cond.trans. for LANG_MODE 0
2018-06-10 16:28:15 +02:00
c0946d8f04
New ML support - w25x20cl spi external flash support
...
+fixed some messages
+sec lang update test
2018-06-09 01:23:04 +02:00
bd1e410228
New ML support - W25X20CL external spi flash support
2018-06-08 00:20:28 +02:00
55157640c5
New ML support - czech version is working!!!
...
postbuild.sh, make_lang.sh - fixed (id and offset calculation)
language.c, language.h - fixed (==||==)
config.h - reserved space for _SEC_LANG changed
Marlin_main.cpp - debug output + hardcoded lang_select(1) //means cz
2018-05-27 15:14:04 +02:00
da3432e237
New ML support - changed _SEC_LANG reserved space to 10kb, added debug code
2018-05-23 16:11:12 +02:00
7e3f675469
New ML support - migration - fixed some messages
...
all variants verified according to lang_en.txt (release only)
config.h updated (enabled ML support)
2018-05-22 20:30:55 +02:00
bd587faab9
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 03:20:03 +02:00
186e630299
New SPI (do not use Arduino SPI class)
...
saved ~300bytes flash, 4bytes ram
2018-03-29 17:42:41 +02:00
65a91b366d
New XYZ calibration with image processing
2018-03-13 12:55:35 +01:00
25dd6dd673
new module adc (analog2digital)
...
temperature.cpp - adc sampling state machine removed
new dcode D9 (adc read/write + simulator)
temporarily DEBUG_DISABLE_STARTMSGS because UI blocked
SILENT_MAX_FEEDRATE reduced to 172mm/s
hexfile removed
build number 137x
2017-12-20 13:42:20 +01:00
Alex Voinea
3d-gussner
Yuri D'Elia
DRracer
D.R.racer
MRprusa3d
MRprusa3d
Marek Bel
Robert Pelnar
mkbel