7005c6d685
selftest for heater/heatbed thermistor updated (prolonged heating times, changed target temperature for heater)
2017-06-06 10:51:01 +02:00
0c4b5795fa
G4: in case that there is no dwell time set, "Sleep..." message is not printed on LCD
2017-06-05 10:22:02 +02:00
1e734d361a
selftest static memory error fixed; snmm: updated stop print messages
2017-05-31 17:52:00 +02:00
34247972f5
fw version changed
2017-05-30 15:29:05 +02:00
11a86a6a9a
snmm: M702 (unload filament) extended, snmm stop print: user is asked which filaments to unload
2017-05-30 15:23:54 +02:00
bc61622d21
snmm: stop print unloads only used filaments, disable steppers (M84) resets used filaments
2017-05-29 17:35:45 +02:00
36091dcde4
M117 command fixed to be able to print strings without restrictions
2017-05-26 14:10:50 +02:00
86e4056680
removed unused gcode description
2017-05-23 15:06:32 +02:00
536e3e8b9f
changed printer revision displayed in support menu for multimaterial
2017-05-22 13:14:11 +02:00
baeeb733e9
modified palgtool.pl to include avr/pgmspace.h to language_all
2017-05-22 11:52:35 +02:00
c2615d0038
added config files for multi material
2017-05-22 10:13:57 +02:00
e8440f8085
changed version
2017-05-22 01:47:50 +02:00
8ab84540d2
configuration files updated
2017-05-19 18:37:39 +02:00
844c429c6d
changed fw version
2017-05-19 14:15:46 +02:00
e5d10074cf
stop print during auto home and mesh bed leveling improved
2017-05-19 13:52:13 +02:00
67c3e75a20
added space to printing pinda preheat time
2017-05-18 20:06:31 +02:00
12f9afce74
tset heatbed target temperature to zero at the end of temp. calibration, before final message is shown
2017-05-18 19:30:20 +02:00
1813819c6f
applying live adjust Z corrected because of temp. calibration
2017-05-17 16:08:44 +02:00
8f904f90d0
Italian bed correction messages corrected
2017-05-17 10:54:23 +02:00
118537c0fb
Messages in German language corrected
2017-05-16 17:15:58 +02:00
6d7127cf1c
messages translated, readded changing extruder from menu
2017-05-16 11:11:05 +02:00
fefa240cd7
czech messages corrected; temp. calibration: improved serial communication, disable steppers after calibration, preheat phase on start print when running from octoprint,
2017-05-14 22:50:35 +02:00
01c9bd8eeb
updated messages when loading filament
2017-05-12 15:55:19 +02:00
57ef9cf59b
unloading filaments and M600 messages updated
2017-05-12 15:02:52 +02:00
bb3887fe1b
calibration status and pinda probe calibration status were split
2017-05-12 11:18:01 +02:00
9fdd23aaa5
snmm: czech messages corrected, M600 filament not loaded, timers updated, updated behavior when choosing "change filament" from menu
2017-05-12 10:23:01 +02:00
7c2caa0fec
prepare filament message in english, bowden menu updated
2017-05-09 18:45:53 +02:00
1db5b43175
snmm: bowden length menu updated
2017-05-05 15:57:12 +02:00
44a611a23e
added defines for snmm, removed unused defines
2017-05-05 01:55:36 +02:00
134a50f5b3
messages updated, different bowden lengths for SNMM used, M600 for SNMM updated, stop print for SNMM updated, load all filaments added
2017-05-05 01:29:59 +02:00
df9f063f99
snmm: removed detection if print was terminated by reset/blackout; initial version of stop print for snmm
2017-05-03 16:55:13 +02:00
2fa97d5dfe
Added messages in czech and english for SNMM, service menu for adjusting bowden lengths; updated service menu to be extendable; M600: loading filament for SNMM updated; unload all filaments updated
2017-05-02 19:21:52 +02:00
032f2637a7
adding edits made by akukan
2017-04-30 17:08:00 +02:00
f28252f563
changed version number
2017-04-28 11:45:32 +02:00
3dfe8d6875
unload all filament initial version
2017-04-28 11:44:42 +02:00
32df4f68a1
messages translated, invalidate calibration status at the beginning of temp. calibration
2017-04-28 11:09:32 +02:00
397039270a
PINDA Preheating countdown updated
2017-04-27 14:16:12 +02:00
50b7f627cd
pinda preheating messages changed
2017-04-25 22:00:05 +02:00
d5aa1bdceb
updated pinda preheat coordinate and pause retraction
2017-04-25 13:38:13 +02:00
ab5c59b6a8
removed redefinition
2017-04-25 13:32:45 +02:00
2aa363f460
lcd_timeoutToStatus
2017-04-25 12:59:44 +02:00
7e8780ba61
long press compatible with timeout to status, temp compensation extrapolation, preheat Z coordinate added, G75 for showing interpolation table
2017-04-25 11:36:34 +02:00
7ec45271c2
timeout to status, better print time counting when using pause print
2017-04-21 16:29:04 +02:00
b06b985ca7
Merge branch 'MK2' into MK2
2017-04-19 17:48:53 +02:00
4eaefd923a
configuration files updated
2017-04-19 16:41:59 +02:00
c03a18f8c3
czech messages added, temperature calibration is off in fresh eeprom, pinda preheat phase is not used unless calibration was run, pause print works with gcode absolute and relative extruder mode, move z higher after selftest
2017-04-19 16:15:11 +02:00
329e1ac9bb
waiting for PINDA to cool down
2017-04-13 16:51:30 +02:00
4de9b1c9f6
temp calibration on/off initialization when updating firmware
2017-04-13 16:15:34 +02:00
70b6e13de4
farm mode activation and farm number initialization handled when upgrading firmware versions and when flashing to new eeprom
2017-04-13 15:25:56 +02:00
803d19aa86
preheat error for bed
2017-04-13 14:57:59 +02:00
767d34fff8
added blanking time for button debouncing, lcd_clicked() improved, fan selftest code slightly modified
2017-04-12 11:25:10 +02:00
e061209fc2
mesh bed leveling flag
2017-04-10 20:48:44 +02:00
ba36fbbfa3
endif removed
2017-04-10 11:53:20 +02:00
fc221fbea5
Merged PINDA temp calibration branch into MK2
2017-04-10 11:10:03 +02:00
7b962d666f
pause print statistics
2017-04-07 14:56:52 +02:00
2060d319f5
faster load filament, extrusion before unload filament
2017-04-07 12:12:16 +02:00
fab71ff7cf
information that temp calibration active is active is stored to eeprom
2017-04-06 19:56:01 +02:00
ccdf5e9c41
Message that temp calibration has not been run yet is displayed only if temp. calibration is activated
2017-04-06 19:44:03 +02:00
08a59f7fef
status messages for temp calibration added, initial versoin of temp calibration on/off from menu
2017-04-06 18:57:11 +02:00
abadaa5885
added retraction to preheat, no waiting when running mesh bed leveling from calibration menu
2017-04-06 13:14:30 +02:00
56f5975083
XYZ calibration first round: if least square error is bigger than threshold value, run another iteration
2017-04-05 18:35:26 +02:00
d9fc29273e
statistics for stop print changed
2017-04-04 13:41:20 +02:00
7086764d35
different preheat error messages for bed and hotend
2017-04-03 15:28:03 +02:00
53938e2280
added defines for long pause print, button long press and pid tuning
2017-04-03 11:03:10 +02:00
762167fb00
Merge remote-tracking branch 'ayourk/MK2' into MK2
2017-03-31 18:49:23 +02:00
6d9ab7109f
fixed pid calibration finish status
2017-03-31 17:20:05 +02:00
870f85ce61
PID tuning from menu
2017-03-31 17:12:16 +02:00
759f53e301
Merge branch 'MK2' of https://github.com/PavelSindler/Prusa-Firmware
2017-03-30 17:39:21 +02:00
6ffc022633
stop print statistics needs to finish, lcd_licked function improved to work with long press button, selftest bug fixed; stop print, pause print and live adjust are hidden in mesh bed leveling and auto home
2017-03-30 16:48:10 +02:00
64f4181451
initial version of long pause
2017-03-28 17:29:10 +02:00
b52e034da0
added timer for button long press
2017-03-23 15:10:32 +01:00
69f76e6bee
added timer for button long press
2017-03-23 15:09:59 +01:00
12505d0f4e
button long press activates move Z axis menu, Rx buffer behavior improved when it is full ( #66 )
2017-03-23 15:08:11 +01:00
14e4c80e7e
Merge branch 'MK2' into MK2
2017-03-23 15:05:47 +01:00
7daf6b2efd
dont use blocking encoder for button press, lcd_update(false) added to setup function
2017-03-23 14:38:18 +01:00
8c35b18ed4
Merge pull request #65 from PavelSindler/MK2
...
M304 doues not survive reboot fixed, farm mode activation fixed, xyz cal. messages fixed
2017-03-23 12:06:15 +01:00
65a2700b97
return to previously active menu after long press
2017-03-23 11:56:48 +01:00
ed5842d1d1
Rx buffer overflow behavior improved
2017-03-22 18:43:19 +01:00
04f8e6d61e
long press in non-modal mode
2017-03-21 17:10:04 +01:00
0dc93b91bc
lcd_buttons_update in interrupt
2017-03-20 11:50:30 +01:00
fb8ba9c151
interrupt dont use, another iteration
2017-03-20 10:34:37 +01:00
31c7469b79
long press init
2017-03-17 10:26:15 +01:00
e7dfb98a4f
M304 does not survive reboot fixed
2017-03-15 17:55:14 +01:00
af962b7473
none
2017-03-15 15:56:42 +01:00
3017decb9a
fixed undesirable farm mode activation after flashing new firmware
2017-03-15 14:36:58 +01:00
0dee7b78ed
fixed message when serching first point in xyz cal.
2017-03-15 14:06:03 +01:00
971288063e
Merge pull request #56 from acortellini/patch-1
...
Bug: M20 - List SD card
2017-03-14 13:04:08 +01:00
2d05ae6be5
ping time prolonged to 60s
2017-03-13 14:49:29 +01:00
716b0bd1c7
ping time prolonged to 60s
2017-03-13 14:49:01 +01:00
9411d1dcc5
Merge pull request #60 from PavelSindler/MK2
...
farm mode: printer sends farm number and status, no ping acoustic allert
2017-03-13 14:45:15 +01:00
7ad319a16a
farm mode: printer sends farm number and status, no ping acoustic allert
2017-03-13 14:40:26 +01:00
43710fc9b7
Merge pull request #57 from PavelSindler/MK2
...
farm mode ping, PRN1 sends farm number
2017-03-07 19:25:03 +01:00
a821f8d488
ping for farm mode added
2017-03-07 19:21:14 +01:00
7883d4eb4d
ping for farm mode added
2017-03-07 19:20:49 +01:00
608717d110
farm mode: detection if printer is connected to monitoring, PRN1 sends also farm number
2017-03-07 19:19:13 +01:00
7b86fa6016
Bug: M20 - List SD card
...
When the SD card is inserted in a Mac computer some special directory are written. The purse firmware is unable to navigate those directory and generates an error sent showed on the serial line.
the BUG is the instruction SERIAL_ECHOLN does not work with string pointers and there fore garbage is sent on the serial line.
The proposed correction is to use the right instruction: SERIAL_ECHORPGM that works with string pointers.
Therefore the correct message is MSG_SD_CANT_ENTER_SUBDIR and not the original listed.
2017-03-07 09:37:15 -05:00
4eb45faded
changed version, pinda probe calibration menu
2017-03-06 16:24:23 +01:00
f6edfb7c19
farm mode ping
2017-03-06 15:20:24 +01:00
64b9678e6b
G80 - pinda heating and autohome added
2017-03-06 12:14:08 +01:00
7b4c79b4d0
Storing status for pinda probe calibration
2017-03-06 11:19:21 +01:00
PavelSindler
PavelSindler
Alfredo