7cc8b743c2
Add .gitignore. Setup doxyfile. Create project documentation main page. Document property of static object constructors on gcc-avr.
2018-06-05 18:30:02 +02:00
75f048ac4b
Add default doxyfile.
2018-06-05 18:23:48 +02:00
5f033d5a1a
Do not create static object in global function. Saves 8B RAM and 14B flash, because there is no need to guard constructor against concurrent calls.
2018-06-05 17:47:18 +02:00
e25b869b5e
Eliminated the -Wliteral-suffix warnings from ultralcd.cpp
2018-06-05 13:49:58 +02:00
746ac17e4e
debugging
2018-06-04 16:40:56 +02:00
47c68c884c
New ML support - fixed duplicate strings
2018-06-01 14:35:03 +02:00
53d9d8bd8a
New ML support - lang codes
...
+script tunning
2018-06-01 10:47:47 +02:00
5004433b20
Fix warning: This is kind of important
...
Again another fix from https://github.com/prusa3d/Prusa-Firmware/pull/138 made by @Thess for the MK2 branch which i think is quite important.
Ardunio IDE 1.8.5 result with Compiler warnings set to "More" or "All"
```
sketch\Marlin_main.cpp:3265:44: warning: the address of 'retracted' will always evaluate as 'true' [-Waddress]
if((echange<-MIN_RETRACT && !retracted) || (echange>MIN_RETRACT && retracted)) { //move appears to be an attempt to retract or recover
^
sketch\Marlin_main.cpp:3265:82: warning: the address of 'retracted' will always evaluate as 'true' [-Waddress]
if((echange<-MIN_RETRACT && !retracted) || (echange>MIN_RETRACT && retracted)) { //move appears to be an attempt to retract or recover
^
sketch\Marlin_main.cpp:3268:28: warning: the address of 'retracted' will always evaluate as 'true' [-Waddress]
retract(!retracted);
^
sketch\Marlin_main.cpp:3870:15: warning: statement has no effect [-Wunused-value]
```
I don't know if that helps making small pull requests as they are easier to review or it would make sense to combine few more.
Prusa should really review this pull [request](https://github.com/prusa3d/Prusa-Firmware/pull/138 ) again for the MK3 branch, as it was one that made warnings disapear in the MK2 branch and made finding new flaws in the code much much easier.
2018-06-01 10:17:03 +02:00
5a2b056d47
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
2018-06-01 00:43:16 +02:00
7c4fce7876
whitespace correction
2018-05-31 18:55:14 +02:00
73708ec883
Improved M860 - now wait for cooling of PINDA, too
...
The M860 - wait for PINDA temperature - gcode has been improved. Until now it could only wait until the PINDA has been warmed up to a set temperature. Now it also can wait until the PINDA has cooled down to a set temperature. The calling syntax has not been changed at all. The logic now looks if the bed or hotend have a target temperature different from 0. If so, the code waits until PINDA has warmed up. Otherwise it waits until PINDA has cooled down.
Applications:
- Possibility to start a Print at exactly the right PINDA temperature. (Do not start the heater until PINDA is cooled down)
- Much easier manual temperature calibration (automating the wait for cool down in between calibration runs)
- Possibility for temp calibration verification on one heat bed by printing multiple objects with different PINDA temperatures one after the other
2018-05-31 16:41:59 +02:00
957b3cfac5
Merge pull request #783 from 3d-gussner/MK3_fix1
...
Fixed redefined warning
2018-05-31 14:21:41 +02:00
d70d38bb0c
Merge pull request #784 from 3d-gussner/MK3_fix2
...
Fixed unused variable c as in pull request #138
2018-05-31 14:15:17 +02:00
80c641ae5d
Merge pull request #789 from 3d-gussner/MK3_fix4
...
Fixed warning: invalid suffix on literal; C++11 requires a space betw…
2018-05-31 14:09:49 +02:00
731fef3d32
Fix remaining forgotten comments
2018-05-30 23:15:01 +02:00
77f3160531
language.h - debug output conditional translation
2018-05-30 20:15:43 +02:00
37e575f4bc
New ML support - debug output, bootloader
...
bootapp - automaticaly erase flash when necessary
+test code
2018-05-30 19:29:52 +02:00
9104b0601a
power panic: extruder_multipliers added
2018-05-30 18:59:33 +02:00
eeca0f683b
Fixed warning: invalid suffix on literal; C++11 requires a space between literal and identifier [-Wliteral-suffix]
2018-05-30 16:06:22 +02:00
3bf47d7f83
"run xyz cal first" message
2018-05-30 15:29:59 +02:00
dcb77e8c7e
Merge remote-tracking branch 'upstream/MK3' into temp_cal_coordinates_fix
2018-05-30 15:22:20 +02:00
987f8969c0
Merge remote-tracking branch 'upstream/MK3' into temp_cal_coordinates_fix
2018-05-30 15:20:40 +02:00
72a382b34d
fix in macro definition
2018-05-30 15:07:24 +02:00
2561ab9c7d
Merge pull request #786 from XPila/MK3-new_lang
...
Mk3 new lang
2018-05-30 14:54:47 +02:00
3e29312b41
fixed compilation (c++11)
2018-05-30 14:53:14 +02:00
d8706be8de
Fixed forgotten comment
2018-05-30 13:39:24 +02:00
dce2d45499
Fixed forgotten comment
2018-05-30 13:35:48 +02:00
2f9b63275f
Fixed unused variable c as in pull request #138
2018-05-30 13:26:31 +02:00
167bc61ef9
Fixed redefined warning
2018-05-30 12:57:51 +02:00
4746c77195
New ML support - bootloader support and update proces test
2018-05-29 21:03:47 +02:00
0ddb31d4eb
Removed hexfile
2018-05-29 17:28:33 +02:00
b47a29b388
New ML support - fixed invalid characters, added some cz translations
2018-05-29 15:56:00 +02:00
d307868a90
merge with upstream
2018-05-28 20:38:55 +02:00
26724c4a48
removed message
2018-05-28 20:31:57 +02:00
7e79ce8e53
MK3: crash detection for Z axis is active during auto home and mesh bed leveling (normal mode is forced for Z movents); temp cal coordintes corrections; temp cal: xy movents always in safe Z distance from heatbed, Z-axis homing improved
2018-05-28 20:26:15 +02:00
b3f4e1f6e4
New ML support - language menu
2018-05-28 19:41:16 +02:00
baa66a0887
New ML support - secondary language name, language selection
2018-05-28 17:14:55 +02:00
3bf2552b6c
fixed #761 from hzapper (#elif instead of #else if)
2018-05-28 13:41:36 +02:00
28a767b460
Merge pull request #760 from PavelSindler/safety_timer_fixes
...
Safety timer not active during filament runout procedure
2018-05-28 13:28:24 +02:00
58ae70c4e1
Merge branch 'MK3' into MK3-new_lang
2018-05-28 13:22:14 +02:00
15207e4d5e
Linearity correction fix - (eeprom storage changed to byte instead of word)
...
+enabled for XYZ axes
2018-05-28 01:47:08 +02:00
def9ab56f6
New ML support - language.c - fixed return origial string for zero length translation
2018-05-27 16:24:21 +02:00
55157640c5
New ML support - czech version is working!!!
...
postbuild.sh, make_lang.sh - fixed (id and offset calculation)
language.c, language.h - fixed (==||==)
config.h - reserved space for _SEC_LANG changed
Marlin_main.cpp - debug output + hardcoded lang_select(1) //means cz
2018-05-27 15:14:04 +02:00
2ffb95c72a
bugfix: use absolute coordinates for steel sheet removal position, because there is no homing at the beginning of calibration in case that position is already known
2018-05-24 20:28:00 +02:00
64f7272ea7
M27: returns print saved (fixes setting temperatures to zero during crash detection)
2018-05-24 18:49:35 +02:00
2cf20c8c99
New ML support - migration - fix_source_1.sh script (replace 'MSG_xx' with '_T(MSG_xx)')
...
+ output + fixed source
2018-05-23 16:37:08 +02:00
da3432e237
New ML support - changed _SEC_LANG reserved space to 10kb, added debug code
2018-05-23 16:11:12 +02:00
f00a9ce636
New ML support - language.c, language.h - code fixed, Marlin_main.cpp - debug output
2018-05-23 15:46:08 +02:00
d979c3dffc
New ML support - messages.c - some strings fixed
2018-05-23 14:18:37 +02:00
0091b41fb5
Merge pull request #744 from PavelSindler/M860_fix
...
M860 fix: send busy messages
2018-05-23 13:15:46 +02:00
7e3f675469
New ML support - migration - fixed some messages
...
all variants verified according to lang_en.txt (release only)
config.h updated (enabled ML support)
2018-05-22 20:30:55 +02:00
8c9b670c76
Merge pull request #746 from MRprusa3d/MK3
...
menu returns corrections
2018-05-22 16:08:08 +02:00
137e1c5027
whitespace
2018-05-22 13:33:31 +02:00
d63a17c696
Safety timer not active during filament runout detection
2018-05-22 13:31:21 +02:00
bd587faab9
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 03:20:03 +02:00
8573b65b05
_MIN_ENDSTOP_INVERTING redefinition in variant files (constant -> define)
2018-05-21 23:28:28 +02:00
a184d2b824
Merge pull request #756 from XPila/MK3-new_lang
...
Mk3 new lang
2018-05-20 13:26:28 +02:00
a528f8837c
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
2018-05-20 13:24:52 +02:00
5b015907aa
New localization - macro declarations fixed
2018-05-20 13:15:46 +02:00
9b7eeaecaa
version changed
2018-05-18 14:42:35 +02:00
503d5551e6
Fix build of MK2. Global variable distance_from_min was removed, do not update it.
...
Expression
float y = vec_x[1] * pgm_read_float(bed_ref_points_4+mesh_point*2) + vec_y[1] * pgm_read_float(bed_ref_points_4+mesh_point*2+1) + cntr[1];
is identical with expression in count_xyz_details().
2018-05-16 18:40:36 +02:00
3eb21b65ed
wizard fix: don't reset calibration status when repeating first layer cal.
2018-05-15 23:19:23 +02:00
83aa710da6
menu returns corrections
...
Settings::FilamentSensor & FilamentAutoload
removing Calibration::ShowEndStops @ MK3
2018-05-15 20:23:22 +02:00
c59e9bd6be
M860 fix: send busy messages
2018-05-15 18:27:25 +02:00
553779a65d
Merge pull request #723 from mkbel/refactor_bed_geometry
...
Refactor bed geometry
2018-05-14 17:18:03 +02:00
b71a29ad96
Use ShortTimer instead of long_press_timer global variable.
2018-05-11 17:05:12 +02:00
02ecd08786
Convert Time class to template, instantiate LongTimer for longer and ShortTimer for shorter periods.
2018-05-11 16:31:42 +02:00
07a7ce1acf
Remove unused lcd_ping_allert().
2018-05-11 15:09:27 +02:00
e8730c2899
Merge branch 'MK3' into read_xyz_cal
...
# Conflicts:
# Firmware/ultralcd.cpp
2018-05-10 18:31:31 +02:00
329ea199ec
Show measured bed offset from expected position even if not homed. Remove redundant lcd_quick_feedback() calls.
2018-05-10 18:24:49 +02:00
dd89226537
Merge pull request #722 from MRprusa3d/MK3
...
build instructions update
2018-05-10 14:44:55 +02:00
2bfc7475a8
version changed
2018-05-09 18:58:24 +02:00
2a5a7ab9d2
Add bed calibration points macro definitions to MK25 variants.
...
Homing and full print area printing tested on MK25.
2018-05-09 17:09:57 +02:00
59f3f9d8ec
New localization - includes fixed
2018-05-09 16:55:41 +02:00
80efafd7b9
menu returns corrections
...
Statistics
Calibration::ShowEndStops
Support::ExtruderInfo
Support::BeltStatus
Support::Temperatures
Support::Voltages
2018-05-09 00:27:32 +02:00
f00bde09a4
Re-factor bed calibration point coordinates to match bed CAD data. Tested successfully on MK3 (auto home position not calibrated and calibrated printer and print area position of calibrated printer). MK25 not tested.
2018-05-08 21:54:11 +02:00
737cb9608c
Merge pull request #716 from mkbel/calibrate_Z_via_live_adjust
...
Set calibration status to calibrated also by using live adjust Z.
2018-05-04 16:40:34 +02:00
c359d11858
Do not disable bed heating, when the print is paused.
...
Also remove duplicate handleSafetyTimer() call.
2018-05-04 15:21:22 +02:00
1d7b3ea2de
Set calibration status to calibrated also by using live adjust Z.
...
This fixes problem, that if the first layer calibration is never done, live adjusting Z during printing is not applied after printer reset. Also repeatedly using live adjust Z on uncalibrated printer leads to steadily decreasing meaningless stored live adjust Z value.
2018-05-03 22:03:38 +02:00
777beac66a
Merge pull request #713 from PavelSindler/fan_error_fix
...
fan error synchronization with planner
2018-05-03 16:01:00 +02:00
cd3851e175
Merge pull request #715 from MRprusa3d/MK3
...
Mk3
2018-05-03 14:54:43 +02:00
8a92d9b6a3
MaR::180501b
2018-05-02 23:49:21 +02:00
d02333918f
MaR::180501
2018-05-02 22:13:47 +02:00
72364648dd
Hot fix: Can not move X and Y axis in stealth mode, when the printer is not homed.
...
Disable endstops in move axis menu.
2018-05-02 20:50:47 +02:00
d86d1beeaa
fan error synchronization with planner
2018-05-02 16:16:48 +02:00
3d595cc523
Merge pull request #712 from XPila/MK3-V3_2
...
Mk3 v3 2
2018-05-02 13:43:07 +02:00
964d019dd1
MK3 - extruder current = 30
2018-05-02 13:42:05 +02:00
420d1079af
terminate temperature calibration in case that Z probing function returns false
2018-04-30 17:51:44 +02:00
b691225d0b
Merge pull request #701 from XPila/MK3-V3_2
...
Decreased stallguard sensitivity for Z axis because meshbedleveling f…
2018-04-30 16:58:18 +02:00
1fc3f9816c
Merge remote-tracking branch 'upstream/MK3' into MK3-V3_2
2018-04-30 16:29:02 +02:00
47868145e6
Decreased stallguard sensitivity for Z axis because meshbedleveling failed on some printers (PFW298).
2018-04-30 16:28:26 +02:00
e2b3553aee
Merge pull request #689 from PavelSindler/MK3_for_merging
...
version change
2018-04-27 20:01:37 +02:00
e1b95ed2a7
version change
2018-04-27 19:59:22 +02:00
12dda6a6ca
Merge pull request #688 from PavelSindler/MK3_for_merging
...
MK3 variants file change
2018-04-27 18:41:49 +02:00
068ee08454
MK3 variants file change
2018-04-27 18:41:00 +02:00
2a57325bd5
Merge pull request #685 from mkbel/add_safety_timer_notice
...
Show full screen blocking notification message after heater turned off
2018-04-27 17:24:33 +02:00
2b42db8ace
Merge pull request #687 from PavelSindler/MK3_for_merging
...
M861: steps value for 35C
2018-04-27 17:24:18 +02:00
265d4761a3
M861: steps value for 35C
2018-04-27 17:07:10 +02:00
e69134eb1c
Rambo 1.0 support (MK25, MK2)
2018-04-27 17:04:55 +02:00
eced66f0f6
Show full screen blocking notification message after heater turning off by safety timer.
2018-04-27 16:23:20 +02:00
Marek Bel
Roman Beránek
PavelSindler
Robert Pelnar
3d-gussner
Christoph Stahl
tarikku
PavelSindler
MRprusa3d