fc221fbea5
Merged PINDA temp calibration branch into MK2
2017-04-10 11:10:03 +02:00
7b962d666f
pause print statistics
2017-04-07 14:56:52 +02:00
2060d319f5
faster load filament, extrusion before unload filament
2017-04-07 12:12:16 +02:00
fab71ff7cf
information that temp calibration active is active is stored to eeprom
2017-04-06 19:56:01 +02:00
ccdf5e9c41
Message that temp calibration has not been run yet is displayed only if temp. calibration is activated
2017-04-06 19:44:03 +02:00
08a59f7fef
status messages for temp calibration added, initial versoin of temp calibration on/off from menu
2017-04-06 18:57:11 +02:00
abadaa5885
added retraction to preheat, no waiting when running mesh bed leveling from calibration menu
2017-04-06 13:14:30 +02:00
56f5975083
XYZ calibration first round: if least square error is bigger than threshold value, run another iteration
2017-04-05 18:35:26 +02:00
d9fc29273e
statistics for stop print changed
2017-04-04 13:41:20 +02:00
7086764d35
different preheat error messages for bed and hotend
2017-04-03 15:28:03 +02:00
53938e2280
added defines for long pause print, button long press and pid tuning
2017-04-03 11:03:10 +02:00
762167fb00
Merge remote-tracking branch 'ayourk/MK2' into MK2
2017-03-31 18:49:23 +02:00
6d9ab7109f
fixed pid calibration finish status
2017-03-31 17:20:05 +02:00
870f85ce61
PID tuning from menu
2017-03-31 17:12:16 +02:00
759f53e301
Merge branch 'MK2' of https://github.com/PavelSindler/Prusa-Firmware
2017-03-30 17:39:21 +02:00
6ffc022633
stop print statistics needs to finish, lcd_licked function improved to work with long press button, selftest bug fixed; stop print, pause print and live adjust are hidden in mesh bed leveling and auto home
2017-03-30 16:48:10 +02:00
64f4181451
initial version of long pause
2017-03-28 17:29:10 +02:00
14e4c80e7e
Merge branch 'MK2' into MK2
2017-03-23 15:05:47 +01:00
7daf6b2efd
dont use blocking encoder for button press, lcd_update(false) added to setup function
2017-03-23 14:38:18 +01:00
8c35b18ed4
Merge pull request #65 from PavelSindler/MK2
...
M304 doues not survive reboot fixed, farm mode activation fixed, xyz cal. messages fixed
2017-03-23 12:06:15 +01:00
65a2700b97
return to previously active menu after long press
2017-03-23 11:56:48 +01:00
ed5842d1d1
Rx buffer overflow behavior improved
2017-03-22 18:43:19 +01:00
04f8e6d61e
long press in non-modal mode
2017-03-21 17:10:04 +01:00
0dc93b91bc
lcd_buttons_update in interrupt
2017-03-20 11:50:30 +01:00
fb8ba9c151
interrupt dont use, another iteration
2017-03-20 10:34:37 +01:00
31c7469b79
long press init
2017-03-17 10:26:15 +01:00
e7dfb98a4f
M304 does not survive reboot fixed
2017-03-15 17:55:14 +01:00
af962b7473
none
2017-03-15 15:56:42 +01:00
3017decb9a
fixed undesirable farm mode activation after flashing new firmware
2017-03-15 14:36:58 +01:00
0dee7b78ed
fixed message when serching first point in xyz cal.
2017-03-15 14:06:03 +01:00
971288063e
Merge pull request #56 from acortellini/patch-1
...
Bug: M20 - List SD card
2017-03-14 13:04:08 +01:00
2d05ae6be5
ping time prolonged to 60s
2017-03-13 14:49:29 +01:00
716b0bd1c7
ping time prolonged to 60s
2017-03-13 14:49:01 +01:00
9411d1dcc5
Merge pull request #60 from PavelSindler/MK2
...
farm mode: printer sends farm number and status, no ping acoustic allert
2017-03-13 14:45:15 +01:00
7ad319a16a
farm mode: printer sends farm number and status, no ping acoustic allert
2017-03-13 14:40:26 +01:00
43710fc9b7
Merge pull request #57 from PavelSindler/MK2
...
farm mode ping, PRN1 sends farm number
2017-03-07 19:25:03 +01:00
a821f8d488
ping for farm mode added
2017-03-07 19:21:14 +01:00
7883d4eb4d
ping for farm mode added
2017-03-07 19:20:49 +01:00
608717d110
farm mode: detection if printer is connected to monitoring, PRN1 sends also farm number
2017-03-07 19:19:13 +01:00
7b86fa6016
Bug: M20 - List SD card
...
When the SD card is inserted in a Mac computer some special directory are written. The purse firmware is unable to navigate those directory and generates an error sent showed on the serial line.
the BUG is the instruction SERIAL_ECHOLN does not work with string pointers and there fore garbage is sent on the serial line.
The proposed correction is to use the right instruction: SERIAL_ECHORPGM that works with string pointers.
Therefore the correct message is MSG_SD_CANT_ENTER_SUBDIR and not the original listed.
2017-03-07 09:37:15 -05:00
4eb45faded
changed version, pinda probe calibration menu
2017-03-06 16:24:23 +01:00
f6edfb7c19
farm mode ping
2017-03-06 15:20:24 +01:00
64b9678e6b
G80 - pinda heating and autohome added
2017-03-06 12:14:08 +01:00
7b4c79b4d0
Storing status for pinda probe calibration
2017-03-06 11:19:21 +01:00
f7a18d3a4e
Attempt #2 at resolving conflicts with upstream for pull request.
2017-03-05 17:47:51 -07:00
822fbc00cb
Fixing conficts due to recent changes involving "Farm Mode".
2017-03-04 18:35:49 -07:00
de15b572cf
Merge pull request #54 from PavelSindler/MK2
...
disable farm mode confirmation, heartbeat improved, typo fixed
2017-03-03 14:39:21 +01:00
062612f96a
return to status after diable farm mode
2017-03-03 14:37:22 +01:00
e366aa495f
PFN added to heartbeat, typo in calibration message fixed
2017-03-03 14:30:48 +01:00
d31d73c565
changed eeprom address for temp shift, verbosity level for mesh bed leveling added, added debuging functions for temp calibration
2017-03-03 14:12:37 +01:00
PavelSindler
PavelSindler
Alfredo
Aaron Yourk