14933f6b0e
Fix. Sound [assist], Z-probe [5], menu_fmt_float13off format for last
...
string parameter from PROGMEM
2019-09-17 16:50:51 +02:00
b660cb3908
ultralcd.cpp
2019-09-17 11:46:29 +02:00
77c4720c8b
Merge remote-tracking branch 'upstream/MK3' into translations-doc
2019-09-17 11:32:27 +02:00
b4e0c2f455
Update ultralcd.cpp
...
Menu Support -> XYZ calibration details -> 3. obrazovka "point offset"
X value is no longer moved to the left if there’s no negative sign
2019-09-17 10:51:43 +02:00
c66b4bd876
Do not ask for preheat temperature twice if calibrating first layer from wizard without filament.
2019-09-16 21:14:17 +02:00
e1cfd6dc4f
Remove option to heat nozzle only from mFilamentItem() when activated from wizard, as it has no use after filament unload was removed from wizard.
2019-09-16 18:48:52 +02:00
ff4450489b
Document.
2019-09-16 18:38:44 +02:00
002a7d31a4
Make lcd_wizard() more debug friendly.
2019-09-16 18:31:12 +02:00
b99038736c
Use eeprom_update_byte instead of eeprom_write_byte
2019-09-16 18:22:34 +02:00
d491a9801d
Update ultralcd.cpp
2019-09-16 16:04:45 +02:00
0e1d559f03
Merge branch 'MK3' into PFW-943
2019-09-16 15:29:28 +02:00
011468598e
IR sensor gen. II
...
disconnected PCB detection
2019-09-16 00:43:37 +02:00
695f938348
Fix conversion warnings
2019-09-14 12:24:45 +03:00
e828798209
Fixes after merge and line buffer
...
General fixes to the lcd_edit_off item and improved way to generate the toggles.
The old process is this: Write '>' if required -> print base -> pad everything before the last character with spaces -> write the eol character -> jump back and print the toggle over the blank characters. This resulted in noticeable flickering when the toggle was redrawn and was showing the same thing. Now the process is similar, except that everything happens in a "line buffer" (a char buffer that holds an entire line) and gets printed in one go, avoiding jump instructions for the lcd and prevents flickering since it doesn't write ' ' and the letters afterwards.
This should get even better when the lcd_buffer gets implemented since the line_buffer will get compared to the existing data on the screen and avoid overwriting what is on the lcd with the same thing.
2019-09-13 21:21:42 +03:00
015b34de05
Alert user in wizard about more sheets presets.
2019-09-13 17:09:11 +02:00
4423106fad
dialogs' layouts fixes (support menu dlgs, statistics etc.)
...
French translation polished
2019-09-13 16:55:05 +02:00
e754780717
Fix condition for returning to wizard. eFilamentAction == FilamentAction::Preheat was never true as eFilamentAction is set to eFilamentAction::None in lcd_return_to_status().
2019-09-13 00:19:37 +02:00
f1d190d2d5
Do not ask same filament related question twice if starting first layer calibration from wizard.
2019-09-12 23:41:42 +02:00
ebf405d589
Preselect "yes" for filament question in first layer calibration wizard.
2019-09-12 23:20:03 +02:00
d256c18635
Fix first layer calibration wizard. Do not jump to WizState::LoadFil if calibration is supposed to be performed.
2019-09-12 23:17:19 +02:00
73642632f5
Do not force PLA filament in first layer calibration from wizard. Remove duplicate variable wizard_active. Saves 410 B of FLASH and 1 B of RAM.
2019-09-12 22:37:28 +02:00
07a0f527d8
Reset lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P() also when it times out.
2019-09-12 20:30:27 +02:00
6630591f9e
Consume lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P().
...
This fixes problem encountered in lcd_v2_calibration(). Selected menu item skips to another if returning to menu after this message is used.
2019-09-12 20:20:33 +02:00
d48197656c
Fix lcd_v2_calibration menu not redrawn after full screen message or question.
2019-09-12 20:05:16 +02:00
770e470fd5
Extract common code to function preheat_or_continue(). Saves 138B of FLASH memory.
2019-09-12 18:53:24 +02:00
d80b8280a0
Remove commented out and unused functions prototypes.
2019-09-12 18:41:17 +02:00
3a541488b2
Rename extr_unload_() to mmu_unload_filament() and move it to ultralcd.cpp as it is menu.
2019-09-12 18:40:02 +02:00
0cdfa7a5e8
Remove dead code.
2019-09-12 18:33:02 +02:00
e83b2ebe1f
Rename mFilamentMenu to lcd_generic_preheat_menu to match naming convention for global function and be more descriptive.
2019-09-12 18:15:15 +02:00
c26d7e50f7
Remove redundant lcd_update_enable(true) call.
2019-09-12 18:07:46 +02:00
6674cbf0d7
Select material / temperature before first layer calibration.
2019-09-12 17:54:05 +02:00
ae839aee31
Merge branch 'MK3' into MK3_Translations
2019-09-12 16:28:36 +03:00
6661d3aa45
Merge remote-tracking branch 'prusa3d/MK3' into MM_lay1_cal
2019-09-12 14:28:52 +02:00
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu
...
Unify preheat menu, add ASA material
2019-09-12 14:25:38 +02:00
444daceca3
Move define as requested
2019-09-12 13:39:04 +03:00
78708903e8
Also update eeprom value
2019-09-12 07:16:31 +03:00
43705aae2e
Rename lay1cal_preheat() to lay1cal_wait_preheat().
2019-09-12 00:19:20 +02:00
ae3e6530e6
Do not ask for PLA filament in the beginning of first layer calibration. Do not ask if filament is present if it can be detected by IR sensor.
2019-09-12 00:14:24 +02:00
14dc6b86e0
Change undocumented behaviour of M190 (Wait for bed temperature). Document M190 and M109 (Wait for extruder temperature).
...
Do not remember CooldownNoWait property set by M190 and M109. If M190 was invoked without parameters, CooldownNoWait property was set if it was previously set by "M109 S" or "M109 S" or printer was after power up. Otherwise CooldownNoWait was not set. Now CooldownNoWait is never set if M190 is invoked without parameters.
Saves 44 B of FLASH memory.
2019-09-11 23:37:09 +02:00
acb0341a1f
Do not set temperature in lay1cal_preheat().
2019-09-11 22:42:40 +02:00
bf9f668574
Fix short filenames scrolling in sdprint menu and status screen
2019-09-11 22:04:48 +03:00
bb1fb49894
Use MMU cutter only as last resort. Cut filament only before last load retry.
2019-09-10 18:36:14 +02:00
5a1005e143
Merge pull request #2186 from DRracer/enable-fan-pin-test-MK3
...
Enable fan pin test even for MK3
2019-09-10 18:21:17 +02:00
d94356802c
Merge pull request #2187 from prusa3d/MK3_3.8.0
...
Mk3 3.8.0
2019-09-10 18:19:36 +02:00
e1e40213b2
Enable fan pin test even for MK3 (was disabled in 3.7.2 due to lack of
...
FLASH)
2019-09-10 16:49:22 +02:00
898e85e69f
Merge pull request #2038 from Eriobis/MK3
...
Add a threshold distance to Z calibration
2019-09-10 16:20:24 +02:00
76c062b980
Merge pull request #2169 from mkbel/format
...
Use same format for all instances where "ok" is send to serial line.
2019-09-10 14:14:47 +02:00
059c6b6cbf
Merge pull request #2148 from leptun/MK3_MK2.x_fix_Default_stepper_power
...
Mk3 mk2.x fix default stepper power
2019-09-10 14:13:51 +02:00
60de313b8a
Merge pull request #1759 from wavexx/enhanced_longpress
...
Default to "Live Adjust Z" when longpressing during a print (closes #1604 )
2019-09-10 14:13:00 +02:00
f6f8f5b3b6
Merge pull request #2171 from 3d-gussner/patch-3
...
Update reserved space bytes as mentioned in
2019-09-10 14:07:56 +02:00
90f85f7128
Merge pull request #2181 from leptun/MK3_fix_lcd_warning
...
Mk3 fix lcd warning
2019-09-10 14:07:28 +02:00
818befb91b
Fix compile warning
...
function was defined as static in lcd.cpp and redefined in lcd.h
2019-09-09 14:05:20 +03:00
2480bd90fc
Revert lcd_putchar to type int and retrun 0
...
Discussion: https://github.com/prusa3d/Prusa-Firmware/pull/2008#issuecomment-514500738
2019-09-09 13:59:20 +03:00
7cc9fe2e4f
Update 1_75mm_MK3S-EINSy10a-E3Dv6full.h
2019-09-09 02:20:39 +02:00
70de4d58f6
Update 1_75mm_MK3-EINSy10a-E3Dv6full.h
2019-09-09 02:20:14 +02:00
fb561b15ad
Update 1_75mm_MK25S-RAMBo13a-E3Dv6full.h
2019-09-09 02:19:52 +02:00
325e4a3403
Update 1_75mm_MK25S-RAMBo10a-E3Dv6full.h
2019-09-09 02:19:27 +02:00
0b50b2295c
Update 1_75mm_MK25-RAMBo13a-E3Dv6full.h
2019-09-09 02:18:54 +02:00
e581263bf1
Update 1_75mm_MK25-RAMBo10a-E3Dv6full.h
2019-09-09 02:18:22 +02:00
ca6937edaf
Update 1_75mm_MK2-RAMBo13a-E3Dv6full.h
2019-09-09 02:17:42 +02:00
a9a3d9d084
Update 1_75mm_MK2-RAMBo10a-E3Dv6full.h
2019-09-09 02:17:00 +02:00
978ace7fd7
Update Marlin_main.cpp
2019-09-09 02:16:06 +02:00
28c1486df2
Update Configuration.h
2019-09-09 02:14:10 +02:00
eec8e5f8c0
Version changed (3.8.0 build 2684)
2019-09-06 19:47:05 +02:00
d408fd2f42
Update reserved space bytes as mentioned in
...
https://github.com/prusa3d/Prusa-Firmware/pull/2170#pullrequestreview-284810840
2019-09-06 15:54:04 +02:00
3ba2197dd3
more space for the second lang
2019-09-06 08:37:59 +02:00
e73b0a88d5
Use same format for all instances where "ok" is send to serial line.
2019-09-05 22:35:01 +02:00
3a5daf1c64
Change default sheet names.
2019-09-05 17:27:21 +02:00
d51b3d6207
Added doxygen todos for missing LCD layout and positioning
2019-09-01 09:51:51 +02:00
339771a5fb
Fixed info screen when selected_sheet hasn't been initialized.
2019-08-31 21:27:08 -04:00
10cdcb3ae3
SD Scroll workaround
2019-08-31 17:00:39 +03:00
795b1d1cf7
Toggle Sound
2019-08-31 16:56:14 +03:00
2345288d40
Fix the LCD pause function
...
Do not call long_pause recursively!
long_pause() is called before resetting the lcd_command_type. As
long_pause uses st_synchronize() internally, there could be time to
schedule another call to long_pause().
2019-08-31 15:28:31 +02:00
3c4fffef60
Merge branch 'MK3' into MK3_Translations
2019-08-31 15:30:51 +03:00
a5a5f5cf0b
Toggle RPi port
...
Probably works, needs to be tested.
2019-08-31 15:25:00 +03:00
f69035323a
Toggle SD Settings
...
This includes FlashAir support and SD Sorting type
2019-08-31 14:55:51 +03:00
a821002f02
Toggle MMU Mode
2019-08-31 07:38:40 +03:00
d347a36509
Merge branch 'MK3' of https://github.com/prusa3d/Prusa-Firmware into MK3-2093-sheet-display
2019-08-30 19:17:27 -04:00
871e29621f
Fix "stuck" rename cursor
2019-08-30 19:14:22 -04:00
a789a8995f
Merge pull request #2145 from mkbel/fix_sheet_reset
...
Fix sheet reset
2019-08-30 16:49:34 +02:00
6a8330a43b
Toggle "HW Setup"*
...
All toggles from "HW Setup" were changed.
This includes:
-"Nozzle d."
-all "Checks"
Also added an option to provide a string from sram (not from progmem) as the toggle argument. This can be useful when toggling numbers or even when toggling sheets in the future.
2019-08-30 17:36:21 +03:00
865484590b
Change default sheet name from "<number>" to "Sheet <number>".
2019-08-30 16:11:41 +02:00
3d292350d4
Do not activate selected_sheet in lcd_v2_calibration() as this leads to calibrating random sheet if activated from calibration menu.
...
selected_sheet is initialized to 0 and contains index of last Sheet menu visited.
2019-08-30 14:45:25 +02:00
26423f98bc
Switch to next sheet if currently selected sheet is not initialized. Move next_initialized_sheet() and change_sheet_from_menu() to eeprom.cpp, rename it to eeprom_next_initialized_sheet() and eeprom_switch_to_next_sheet(). Rename default_sheet_name() to eeprom_default_sheet_name().
2019-08-30 12:24:13 +02:00
6c78c2fad5
Fix compiler warning.
2019-08-30 12:03:35 +02:00
90e5f14309
Fix compile error on MK3
2019-08-30 13:02:00 +03:00
50a8c16f27
Use EEPROM update instead of write.
2019-08-30 12:00:33 +02:00
56c949b9af
Fix typo
2019-08-30 12:14:43 +03:00
d8d0069f97
Fix MK2.x Default stepper power out of sync
2019-08-30 12:12:29 +03:00
b86a92a7d6
Toggle Mode (stepper power)
2019-08-30 07:59:58 +03:00
8df6691819
Relocate sheet menu, show sheet on info screen
...
-Sheet is shown instead of percentage done either if idle, or during
print preheat.
-Relocated sheet menu to below SD menu for additional visibility to
current sheet.
2019-08-29 18:07:24 -04:00
db6e2e0525
Toggle Crash det.
2019-08-29 22:31:30 +03:00
8c8619be05
Convert reset sheet sub menu to function.
2019-08-29 20:52:53 +02:00
abf84e36f5
Fix sheet menu back caption to Steel sheets to match parent menu caption.
2019-08-29 20:23:02 +02:00
d647cdc02c
Convert sheet switcher from sub menu to function. Handle null characters in sheet name.
2019-08-29 20:13:10 +02:00
cd7805ba46
Document
2019-08-29 18:26:24 +02:00
0b196da6fc
Migrate old vale of EEPROM_BABYSTEP_Z only if active sheet is not initialized.
2019-08-29 18:07:49 +02:00
32f435d1a0
Increase number of configurable steel sheets to 8. Move sheets into sub menu of HW setup.
2019-08-29 17:21:08 +02:00
7f51e0bad8
Move SpoolJoin and Cutter to MSGs
2019-08-29 17:35:26 +03:00
3413d5d486
Merge pull request #2139 from DRracer/assist-mode-fixes
...
Fix sound mode [assist]: encoder clicking indefinitely when MMU wants to
2019-08-29 15:55:49 +02:00
fec92b33ae
Merge pull request #2137 from DRracer/illegal-fat-characters-revised
...
Support for more special characters allowed in file names (^ + = [ ] ;
2019-08-29 15:55:36 +02:00
0b21acec46
Minor fix to Toggle Cutter
2019-08-29 15:49:26 +03:00
d0f9f10ed6
Toggle Cutter
2019-08-29 15:43:41 +03:00
1937cf2074
Toggle SpoolJoin
2019-08-29 15:40:04 +03:00
5eea8d26fe
Merge branch 'MK3' into MK3_Translations
2019-08-29 12:08:48 +03:00
f3bb72be64
Reset calibration status if there is no calibrated sheet after reset.
2019-08-29 03:33:33 +02:00
f64252b59b
Hide sheet switcher from main menu, if there are less than 2 sheets calibrated.
2019-08-28 19:08:53 +02:00
9692f94683
Move sheet menu up to be after Print from SD.
2019-08-28 19:01:48 +02:00
3903dc819a
Extract function next_initialized_sheet from change_sheet_from_menu(). Make it more general to depend on sizeof(Sheets::s) instead of hard coded value of 2.
2019-08-28 18:59:48 +02:00
33675c6d1e
Change default sheet names.
2019-08-28 18:16:35 +02:00
49bc11037c
Remove statements with no effect.
2019-08-28 18:14:10 +02:00
1d23cc52e9
endstop sound alert fixes
2019-08-28 09:39:28 +02:00
29c8cb2927
Fix bad merge.
2019-08-27 22:22:36 +02:00
3f04c4db87
Merge branch 'MK3' into preheat_menu
2019-08-27 22:20:23 +02:00
07169ad84a
Make file local variable static.
2019-08-27 20:48:53 +02:00
e57fcc04a7
Fix compiler warnings.
2019-08-27 20:23:48 +02:00
d927d5b05d
Port wizard_active to mFilamentItem().
2019-08-27 20:19:03 +02:00
cef7f31b9f
Set FilamentAction to None if mFilamentMenu left by cooldown or menu back action.
2019-08-27 20:13:55 +02:00
ffc5a64154
Remove commented out code.
2019-08-27 20:06:48 +02:00
269aef1696
Remove unused code guarded by WATCH_TEMP_PERIOD macro as most of the functionality is duplicate to what is implemented in temp_runaway_check(). This will release us from porting setWatch() to unified preheat menu and maintaining it.
2019-08-27 20:05:10 +02:00
1a1be5c518
Fix sound mode [assist]: encoder clicking indefinitely when MMU wants to
...
select filament
2019-08-27 17:10:29 +02:00
bf2097342d
Add ASA preheat into mFilamentMenu();
2019-08-27 17:01:41 +02:00
11ce786aaa
Support for more special characters allowed in file names (^ + = [ ] ;
...
,)
2019-08-27 13:47:58 +02:00
6aaa40b9a3
Merge pull request #2134 from mkbel/fix_power_panic
...
Fix repeated power panic restarted print from beginning or jumped at …
2019-08-27 08:13:26 +02:00
a1e68c3d7f
Merge pull request #2135 from prusa3d/MK3_3.8.0
...
Increase version to 3.8.0-RC2 and build number to 2639.
2019-08-27 08:12:27 +02:00
3da43ae8c2
Do not port print fan preheat speed preset, as it was never used. And it was broken until recently fixed when adding ASA profile.
2019-08-26 21:14:07 +02:00
4792559536
Add farm preheat items. Add setWatch() call.
2019-08-26 21:00:30 +02:00
aa13f9e809
Fix formatting.
2019-08-26 20:19:34 +02:00
668e89e5a9
Preheat menu: Add ASA, hide menu item back when in wizard.
2019-08-26 20:18:34 +02:00
52ae62bbba
Fix formatting.
2019-08-26 20:14:00 +02:00
3628d893ee
Remove duplicate preheat menu.
...
Known limitations: farm_mode missing, wizard_active missing, cooldown missing, ASA missing, print fan missing.
2019-08-26 20:11:52 +02:00
b9b0d6049e
Fix formatting.
2019-08-26 19:48:39 +02:00
159a1a70d8
Update documentation.
2019-08-26 17:19:57 +02:00
c27fcf9cff
Increase version to 3.8.0-RC2 and build number to 2639.
2019-08-26 17:03:18 +02:00
52cb37770b
Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card.
...
As sdpos_atomic was not updated after printer power up and first power panic recovery, it was equal 0. When the first command from SD card was queued its size on SD card was computed as current SD index position minus sdpos_atomic. This was equal to offset from beginning of the file limited to 16 bit storage type. When next power outage occurred earlier then this command was finished and wiped out of queue, this command size (extraordinarily big) was subtracted from sdpos_atomic and saved to EEPROM. This led to up to 65536 B jump back in file printed after next power panic recovery.
2019-08-23 19:30:20 +02:00
3eb36ca194
Fix cmdqueue_dump_to_serial.
...
Header was historically made bigger to contain size of the command on SD card, but those debug functions wasn't updated.
2019-08-23 16:48:30 +02:00
5bb510dd2a
Merge pull request #2129 from DRracer/bed-noise-performance
...
Improve performance of bed PWM automaton
2019-08-22 14:45:01 +02:00
c6df3fe012
Merge pull request #2127 from DRracer/code-size-reduction-1
...
Code size reduced by almost 5KB
2019-08-22 14:25:23 +02:00
d3123a74b0
Updated LCD menu documentation to new form/syntax
2019-08-22 04:58:16 +02:00
514b062107
Added `lcd_menu` format description
...
Added some documentation how the LCD menus look like and added max character values for translations.
There are more things needed and also the placement in the code is an open task. Depending on the decision if we use `messages.c/h`
2019-08-21 10:28:28 +02:00
a7c2aec04c
Code size reduced by almost 5KB
2019-08-21 09:59:51 +02:00
3ed6d0637c
Re-enable tmc2130_sg_stop_on_crash only if crash detection enabled from menu.
...
This fixes bug, that disabling crash detection from menu doesn't work during recovery from crash detection.
2019-08-20 19:32:39 +02:00
f204cdea81
Refactor
...
Remove variable CrashDetectMenu. Read this state from EEPROM_CRASH_DET instead in bool lcd_crash_detect_enabled().
Rename crashdet_enable() to lcd_crash_detect_enable() and move it to ultralcd.cpp.
Rename crashdet_disable() to lcd_crash_detect_disable() and move it to ultralcd.cpp.
Rename lcd_crash_mode_set() to crash_mode_switch().
Remove forward function declarations from *.cpp file.
Saves 34B of FLASH and 2B of RAM.
2019-08-20 17:22:27 +02:00
f07635d08a
Merge pull request #2116 from mkbel/fix_mmu_lay1cal
...
Fix mmu lay1cal
2019-08-19 19:07:10 +02:00
f0642f88f1
Fix power panic broken when PSU_Delta defined.
...
Remove disable_z() call from uvlo_() and uvlo_tiny() power panic interrupt handlers. As historically this function was empty. And in case PSU_Delta macro defined it switches Z trinamic to silent mode, which could take some time and is not needed. Remove alignment to to full step from disable_force_z(), as it is not needed when switching to silent mode.
2019-08-19 17:37:23 +02:00
0d22f8039e
Toggle FSENSOR and FSENSOR_AUTOLOAD
2019-08-19 11:58:16 +03:00
6e9c44af2d
Fix warning
2019-08-19 11:07:11 +03:00
5a3f14b752
"N/A" toggle support and format update
2019-08-19 10:20:17 +03:00
170c1ea866
Split first layer calibration load filament and intro line into separate steps. If load fails, pause print apparently flushes command buffer and intro line is not printed after issue is resolved.
2019-08-16 20:47:55 +02:00
e53734895f
Make MMU load failed blocking to workaround lack of resume print menu item.
...
The same workaround used as for USB print (Octoprint).
2019-08-16 20:20:17 +02:00
1036c4f755
Do not precede first layer calibration without filament if print is paused due to MMU load failed.
2019-08-16 19:00:45 +02:00
b10bd8340a
Make local functions static.
2019-08-15 17:57:30 +02:00
0b798767af
Fix preheat ASA.
2019-08-15 17:54:23 +02:00
a6f955b62d
Use unused macros *_PREHEAT_FAN_SPEED.
2019-08-15 17:47:34 +02:00
eb68bb9b43
Add ASA preheat.
2019-08-15 17:46:29 +02:00
36a69281ee
Remove unused functions forward declarations.
2019-08-15 17:36:05 +02:00
0e4e644476
Merge branch 'MK3' into MK3_3.8.0
2019-08-15 10:34:50 +02:00
ba81149afe
Merge branch 'MK3' into MK3_3.7.3
2019-08-15 10:25:51 +02:00
dc78bc7362
Improve performance of bed PWM automaton - proof of concept
...
There are still some artefacts on the output pin - work in progress.
2019-08-14 17:53:08 +02:00
32fa8caab8
reinitialize the timestamp to ensure enough time to receive response for 0xFF sent.
2019-08-11 17:57:41 -04:00
596ffe1dc2
Actual fix to the missing first two characters
2019-08-10 21:03:45 +03:00
7ce2fedac7
Fix missing first two characters in multi-lang mode
2019-08-10 09:16:23 +03:00
29dcb1cad3
Toggle FANS_CHECK
2019-08-10 08:43:07 +03:00
505deb28fd
Toggle menu item
2019-08-10 08:42:33 +03:00
720ea49fa3
Merge branch 'MK3' into MK3-fix-sdcard-sorting
2019-08-08 19:48:50 -04:00
4e58a112e8
Fix for Toshiba FlashAir (or other) SD card initialization - add clock cycles between sending CMD0 and CMD8. Redone for MK3 branch)
2019-08-08 15:45:59 -04:00
2ddbd606f2
Version changed (3.8.0 build 2608)
2019-08-08 16:44:16 +02:00
84cf1b83c3
Merge pull request #2083 from DRracer/viper
...
Workaround for the "viper" situation bug.
2019-08-07 17:48:57 +02:00
a28c365bb1
Merge pull request #2075 from MRprusa3d/PFW-873b
...
farm mode update, documentation correction
2019-08-07 17:48:30 +02:00
d9dec38815
Workaround for the "viper" situation bug.
2019-08-07 17:23:19 +02:00
7da2ee5fc3
Version changed (3.7.3 build 2370)
2019-08-06 15:37:23 +02:00
33037d369c
Prevent LCD long-press re-entry ( fixes #1196 )
2019-08-05 19:00:29 +02:00
b471bb7540
farm mode update, documentation correction
2019-08-05 17:51:26 +02:00
5cb86a7e8f
Merge pull request #2074 from kuhnmarek/MK3_PFW-967_filament_sensor_check
...
Fw version check disabled in farm mode
2019-08-05 17:41:16 +02:00
091cd49ca5
Fw version check disabled in farm mode
2019-08-05 16:59:09 +02:00
9f8590c572
Merge pull request #2072 from kuhnmarek/MK3_PFW-961_blind_sound
...
changed blind sound
2019-08-05 12:47:31 +02:00
f77414be2b
blind alert sound shorter
2019-08-05 12:41:27 +02:00
f1a947af2c
Whole hw settings hidden in farm mode
2019-08-05 10:40:21 +02:00
cb19f0958b
Use _delay() and _micros() for future compatibility
2019-08-05 09:51:06 +02:00
5f14e9c2e5
Removed sheet setting when in farm mode
2019-08-03 17:35:39 +02:00
15a095ea76
changed blind sound
2019-08-03 15:37:11 +02:00
7c9d3dd177
Update doxydoc of new G-codes
2019-08-01 13:09:20 +02:00
9214e30f74
Merge pull request #2062 from MRprusa3d/PFW-873
...
UI update
2019-08-01 07:20:09 +02:00
2cb977e4a0
UI update
2019-07-31 20:39:57 +02:00
e43e89421c
Merge pull request #2056 from BoCoKeith/patch-1
...
Correct bug in util.cpp is_whitespace_or_nl function.
2019-07-31 17:00:49 +02:00
49d2866b48
Add threshold distance to Z calibration
...
Add missing if statement
2019-07-30 19:43:07 -04:00
bca0fd81eb
Fix loading filament 255 instead of 0 in first layer calibration wizard.
2019-07-30 19:15:33 +02:00
0aed59c947
Fix unsigned char overflow cause invalid filament load.
2019-07-30 19:06:57 +02:00
5fdaead663
Fix language related warnings in LANG_MODE 0
2019-07-29 15:55:42 +03:00
556b87edec
M350 for all axis - MK3
2019-07-29 09:41:33 +03:00
952a24b45d
Update util.cpp
...
Correct "is_whitespace_or_nl": change 'r' to '\r'.
2019-07-28 19:40:18 -06:00
3ddb853bbd
Fix shifted languages. Use \n and \x0a
2019-07-26 18:53:08 +03:00
0687b8e4a2
Merge pull request #2044 from mkbel/fix_missing_mmu_attention
...
Fix missing mmu attention
2019-07-26 09:07:06 +02:00
3b396fb8bf
Merge branch 'MK3' into fix_missing_mmu_attention
2019-07-25 19:10:07 +02:00
a9e9a9857b
Fix "MMU needs attention screen is missing in case of failed unload filament".
2019-07-25 19:09:52 +02:00
3438c0e411
Merge pull request #2042 from NotaRobotexe/octoprint_bugs
...
fixed redundant OK messages in serial
2019-07-25 12:41:43 +02:00
2820baf016
Merge pull request #2040 from NotaRobotexe/MK3
...
multiple sheets - menu switching bug
2019-07-25 09:56:07 +02:00
64115fb146
fixed redundant OK messages in serial
2019-07-24 18:08:14 +02:00
5021fadd5d
multiple sheets - menu switching bug
2019-07-24 11:20:27 +02:00
33195baf9d
Merge pull request #2035 from mkbel/enable_lin_corr
...
Re-enable linearity correction for MK3.
2019-07-24 09:08:43 +02:00
DRracer
michalrudolf
D.R.racer
Marek Bel
MRprusa3d
MRprusa3d
leptun
Marek Běl
3d-gussner
vintagepc
Yuri D'Elia
XPila
rhounsell
Paul Bransford
Marek Kühn
Simon Benoit
Keith Spitz
NotaRobotexe