fff8fc8a48
preHeat @ filament load / unload
...
filament-list correction (PET missing)
2019-02-04 12:12:35 +01:00
921b6993ee
preHeat @ filament load / unload
2019-01-31 05:21:53 +01:00
41f103c28f
Revert "Mk3 bed fast pwm"
2019-01-28 10:53:51 +01:00
c6e6df404c
Merge pull request #1482 from mkbel/IR_fsens_selftest
...
Ir fsens selftest
2019-01-28 10:39:12 +01:00
aaa2670ef8
Remove redundant enum numbering.
2019-01-25 20:14:29 +01:00
b167896c6d
Convert lcd_selftest_screen parameter int _step to enum class testScreen screen.
2019-01-25 20:00:12 +01:00
6d1256eaad
Internationalize "Calibrating home".
2019-01-25 18:06:30 +01:00
579fb42be2
Merge pull request #1480 from MRprusa3d/PFW-556
...
Pfw 556
2019-01-25 15:04:26 +01:00
0d1a7a1774
Merge pull request #1479 from MRprusa3d/PFW-749
...
SD card menu
2019-01-25 14:32:12 +01:00
661c40ef75
Merge pull request #1472 from mkbel/IR_fsens_selftest
...
Ir fsens selftest
2019-01-25 13:14:18 +01:00
edc412697c
Increase selftest_irsensor() filament nozzle unload temperature to ABS.
...
Resume nozzle temperature immediately after unload.
2019-01-24 21:24:46 +01:00
68ffa95aa9
Fix axis self-test progress visualization.
2019-01-24 21:06:03 +01:00
1c4f3259ea
Increase heater check minimum expected temperature rises.
...
Bed increased from 3 to 10 K.
Nozzle increased from 10 to 30 K.
Measured rises with my MK3 printer:
Bed 26K,
Nozzle 73K.
2019-01-24 21:02:04 +01:00
305598d7f6
Fix bed / nozzle test order and progress bar.
...
Known limitation:
Z progress shown in bed progress.
2019-01-24 20:03:37 +01:00
46e2bdaf62
Merge remote-tracking branch 'public_remote/MK3' into PFW-556
2019-01-24 19:39:34 +01:00
22859800f0
Rearrange tests. Move hot end test to the end, to spare time in IR sensor test.
...
Known problems, hot end and bed is swapped. Bed progress indicator is painted to X axis test.
2019-01-24 19:22:36 +01:00
b2b65475df
SD card menu
...
SDcard-menu after card insertion
2019-01-24 17:32:57 +01:00
f4e5c729ac
Merge pull request #1451 from mkbel/Tx_fix
...
Tx fix
2019-01-24 13:41:43 +01:00
273554b9b0
Merge pull request #1470 from XPila/MK3-bed_fast_pwm
...
Mk3 bed fast pwm
2019-01-24 13:11:57 +01:00
eec869b73a
Merge pull request #1477 from MRprusa3d/PFW-723
...
PID / manage_heater
2019-01-24 00:31:23 +01:00
15b45df9fb
PID / manage_heater
...
better build-warnings elimination
2019-01-23 20:14:40 +01:00
867182c266
minTemp
...
more user-proof solution
2019-01-23 18:50:13 +01:00
c4d5b58c37
Merge remote-tracking branch 'upstream/MK3' into MK3-bed_fast_pwm
...
# Conflicts:
# Firmware/temperature.cpp
resolved
2019-01-23 17:04:41 +01:00
54f8f4eb4d
Merge pull request #1460 from MRprusa3d/PFW-723
...
Pfw 723
2019-01-23 14:12:19 +01:00
1d71c1a5d1
Update IR sensor selftest progress bar more frequently.
2019-01-22 19:02:42 +01:00
97a4623800
Fix lcd_selftest_screen for small _progress_scale.
2019-01-22 19:01:55 +01:00
9cda0b69b8
Update IR sensor selftest progress bar.
2019-01-22 18:23:00 +01:00
3ff8a7c740
Unload filament by MMU unit in selftest_irsensor().
...
Known limitation:
If filament was not loaded to nozzle it is sticked completely out of MMU. To be fixed in MMU, as this problem can be reproduced also from printer menu - unload filament.
2019-01-22 14:54:06 +01:00
c371a5ea65
Document.
2019-01-22 14:05:08 +01:00
a92d9c782b
Add IR sensor test.
2019-01-22 11:29:55 +01:00
f292a6ca7a
Refactor filament sensor selftest call.
2019-01-21 21:39:38 +01:00
50bcfae183
Fast PWM for bed - newer set HEATER_BED_PIN to 1
2019-01-21 18:21:17 +01:00
2c0d62fbf7
PID / manage_heater
...
some small corrections
2019-01-21 18:20:40 +01:00
e612eb2a17
Fast PWM for bed - set pwm value from soft_pwm_bed variable.
2019-01-21 18:14:19 +01:00
0963c889f0
Fast PWM for bed - timer2 used as system timer
2019-01-21 17:57:07 +01:00
d7ac459da7
PID / manage_heater
...
build-warnings elimination
2019-01-20 01:23:15 +01:00
d9f8e4eb9e
PID / manage_heater
...
PSD regulator improvement
2019-01-17 02:57:08 +01:00
ca8cb3784c
Merge pull request #1456 from mkbel/Fix_load_fail_current
...
Do not disable motor currents when print is paused due to mmu load er…
2019-01-16 12:49:38 +01:00
3af1f81269
Do not disable motor currents when print is paused due to mmu load error.
2019-01-15 21:40:02 +01:00
d09ff5c3e7
Remove commented out code.
2019-01-15 01:30:54 +01:00
39b391314f
Document meaning of manage_response() move default parameter value.
2019-01-15 01:29:59 +01:00
3b175459b1
Fix filament loaded to far and MMU idler never disengaged after Tx command on printer with idler sensor.
2019-01-15 01:28:51 +01:00
2db42c8577
Merge branch 'MK3' into auto_deplete_2
2019-01-07 21:39:46 +01:00
c080b899c3
Change filament number in T command to alternative if depleted and lcd_autoDepleteEnabled().
2019-01-04 22:32:48 +01:00
7946cd7250
eeprom write nr. limitation
2019-01-04 22:23:11 +01:00
02262ff7ca
mmu load fail: possibility to unload/eject filament from menu
2019-01-04 21:37:19 +01:00
d89c03a0f1
Documentation.
2019-01-04 21:26:13 +01:00
1a219b2372
Mark filament as depleted when detected by MMUv2 FINDA. Do not try to load filament if it is marked depleted, load next filament instead. Force user action when all filaments are marked as depleted.
2019-01-04 21:11:42 +01:00
b7b7e9387f
do resend attempts before pausing print (mmu needs attention state) so the print would not be paused if T-code is not received correctly by mmu; prevent infinite loading
2019-01-04 21:07:52 +01:00
a7128ffa04
Comment.
2019-01-04 19:56:15 +01:00
MRprusa3d
PavelSindler
Marek Bel
Robert Pelnar
PavelSindler