Merge pull request #3752 from 3d-gussner/MK3_3.12_v3.12.0-RC1

Bump up build number to 5576
2022-11-14 14:35:19 +01:00 · 2022-11-14 14:17:11 +01:00 · 2022-11-11 09:44:43 +01:00 · 2022-11-11 09:17:17 +01:00 · 2022-11-07 11:04:54 +01:00 · 2022-11-07 10:37:43 +01:00
45 changed files with 9779 additions and 10100 deletions
--- a/.travis.yml
+++ b/.travis.yml
@ -11,11 +11,11 @@ before_install:
 script:
  - cp Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h Firmware/Configuration_prusa.h
  - bash -x build.sh || { echo "1_75mm_MK3S-EINSy10a-E3Dv6full variant failed" && false; }
-  - bash -x build.sh EN_ONLY || { echo "1_75mm_MK3S-EINSy10a-E3Dv6full EN_ONLY failed" && false; }
+  - bash -x build.sh EN_FARM || { echo "1_75mm_MK3S-EINSy10a-E3Dv6full EN_FARM failed" && false; }
  - rm Firmware/Configuration_prusa.h
  - cp Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h Firmware/Configuration_prusa.h
  - bash -x build.sh || { echo "1_75mm_MK3-EINSy10a-E3Dv6full variant failed" && false; }
-  - bash -x build.sh EN_ONLY || { echo "1_75mm_MK3-EINSy10a-E3Dv6full EN_ONLY failed" && false; }
+  - bash -x build.sh EN_FARM || { echo "1_75mm_MK3-EINSy10a-E3Dv6full EN_FARM failed" && false; }
  - rm Firmware/Configuration_prusa.h
  - cp Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h Firmware/Configuration_prusa.h
  - bash -x build.sh || { echo "1_75mm_MK25S-RAMBo13a-E3Dv6full variant failed" && false; }
--- a/Firmware/Configuration.h
+++ b/Firmware/Configuration.h
@ -17,17 +17,17 @@ extern PGM_P sPrinterName;

 // Firmware version
 #define FW_MAJOR 3
-#define FW_MINOR 11
-#define FW_REVISION 1
-//#define FW_FLAVOR RC      //uncomment if DEBUG, DEVEL, ALPHA, BETA or RC
-//#define FW_FLAVERSION 1     //uncomment if FW_FLAVOR is defined and versioning is needed.
+#define FW_MINOR 12
+#define FW_REVISION 0
+#define FW_FLAVOR RC      //uncomment if DEBUG, DEVEL, ALPHA, BETA or RC
+#define FW_FLAVERSION 1     //uncomment if FW_FLAVOR is defined and versioning is needed.
 #ifndef FW_FLAVOR
    #define FW_VERSION STR(FW_MAJOR) "." STR(FW_MINOR) "." STR(FW_REVISION)
 #else
    #define FW_VERSION STR(FW_MAJOR) "." STR(FW_MINOR) "." STR(FW_REVISION) "-" STR(FW_FLAVOR) "" STR(FW_FLAVERSION)
 #endif

-#define FW_COMMIT_NR 4987
+#define FW_COMMIT_NR 5576

 // FW_VERSION_UNKNOWN means this is an unofficial build.
 // The firmware should only be checked into github with this symbol.
--- a/Firmware/Marlin.h
+++ b/Firmware/Marlin.h
@ -385,7 +385,9 @@ void bed_analysis(float x_dimension, float y_dimension, int x_points_num, int y_
 void bed_check(float x_dimension, float y_dimension, int x_points_num, int y_points_num, float shift_x, float shift_y);
 #endif //HEATBED_ANALYSIS
 float temp_comp_interpolation(float temperature);
+#if 0
 void show_fw_version_warnings();
+#endif
 uint8_t check_printer_version();

 #ifdef PINDA_THERMISTOR
--- a/Firmware/Marlin_main.cpp
+++ b/Firmware/Marlin_main.cpp
@ -798,7 +798,7 @@ int uart_putchar(char c, FILE *)
 void lcd_splash()
 {
 	lcd_clear(); // clears display and homes screen
-	lcd_puts_P(PSTR("\n Original Prusa i3\n   Prusa Research"));
+	lcd_printf_P(PSTR("\n Original Prusa i3\n   Prusa Research\n%20.20S"), PSTR(FW_VERSION));
 }


@ -839,30 +839,31 @@ void factory_reset()
 	}
 	KEEPALIVE_STATE(IN_HANDLER);
 }
-
+#if 0
 void show_fw_version_warnings() {
 	if (FW_DEV_VERSION == FW_VERSION_GOLD || FW_DEV_VERSION == FW_VERSION_RC) return;
 	switch (FW_DEV_VERSION) {
-	case(FW_VERSION_ALPHA):   lcd_show_fullscreen_message_and_wait_P(_i("You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage."));   break;////MSG_FW_VERSION_ALPHA c=20 r=8
-	case(FW_VERSION_BETA):    lcd_show_fullscreen_message_and_wait_P(_i("You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage."));    break;////MSG_FW_VERSION_BETA c=20 r=8
+	case(FW_VERSION_BETA):    lcd_show_fullscreen_message_and_wait_P(MSG_FW_VERSION_BETA);   break;
+	case(FW_VERSION_ALPHA):
  case(FW_VERSION_DEVEL):
 	case(FW_VERSION_DEBUG):
    lcd_update_enable(false);
    lcd_clear();
-  #if FW_DEV_VERSION == FW_VERSION_DEVEL
+  #if (FW_DEV_VERSION == FW_VERSION_DEVEL || FW_DEV_VERSION == FW_VERSION_ALPHA)
    lcd_puts_at_P(0, 0, PSTR("Development build !!"));
  #else
    lcd_puts_at_P(0, 0, PSTR("Debbugging build !!!"));
  #endif
    lcd_puts_at_P(0, 1, PSTR("May destroy printer!"));
-    lcd_puts_at_P(0, 2, PSTR("ver ")); lcd_puts_P(PSTR(FW_VERSION_FULL));
-    lcd_puts_at_P(0, 3, PSTR(FW_REPOSITORY));
+    lcd_puts_at_P(0, 2, PSTR("FW")); lcd_puts_P(PSTR(FW_VERSION_FULL));
+    lcd_puts_at_P(0, 3, PSTR("Repo: ")); lcd_puts_P(PSTR(FW_REPOSITORY));
    lcd_wait_for_click();
    break;
 //	default: lcd_show_fullscreen_message_and_wait_P(_i("WARNING: This is an unofficial, unsupported build. Use at your own risk!")); break;////MSG_FW_VERSION_UNKNOWN c=20 r=8
 	}
 	lcd_update_enable(true);
 }
+#endif

 //! @brief try to check if firmware is on right type of printer
 static void check_if_fw_is_on_right_printer(){
@ -1265,7 +1266,7 @@ void setup()
    temp_mgr_init();

 #ifdef EXTRUDER_ALTFAN_DETECT
-	SERIAL_ECHORPGM(_n("Extruder fan type: "));
+	SERIAL_ECHORPGM(_n("Hotend fan type: "));
 	if (extruder_altfan_detect())
 		SERIAL_ECHOLNRPGM(PSTR("ALTFAN"));
 	else
@ -1506,7 +1507,9 @@ void setup()

  if (!farm_mode) {
    check_if_fw_is_on_right_printer();
+#if 0
    show_fw_version_warnings();    
+#endif
  }

  switch (hw_changed) { 
@ -1612,11 +1615,11 @@ void setup()
      manage_heater(); // Update temperatures 
 #ifdef DEBUG_UVLO_AUTOMATIC_RECOVER 
 		printf_P(_N("Power panic detected!\nCurrent bed temp:%d\nSaved bed temp:%d\n"), (int)degBed(), eeprom_read_byte((uint8_t*)EEPROM_UVLO_TARGET_BED));
-#endif 
+#endif
     if ( degBed() > ( (float)eeprom_read_byte((uint8_t*)EEPROM_UVLO_TARGET_BED) - AUTOMATIC_UVLO_BED_TEMP_OFFSET) ){ 
          #ifdef DEBUG_UVLO_AUTOMATIC_RECOVER 
        puts_P(_N("Automatic recovery!")); 
-          #endif 
+          #endif
         recover_print(1); 
      } 
      else{ 
@ -4285,11 +4288,11 @@ void process_commands()
 #endif //PRUSA_SN_SUPPORT
    else if(code_seen_P(PSTR("Fir"))){ // PRUSA Fir

-      SERIAL_PROTOCOLLN(FW_VERSION_FULL);
+      SERIAL_PROTOCOLLNPGM(FW_VERSION_FULL);

    } else if(code_seen_P(PSTR("Rev"))){ // PRUSA Rev

-      SERIAL_PROTOCOLLN(FILAMENT_SIZE "-" ELECTRONICS "-" NOZZLE_TYPE );
+      SERIAL_PROTOCOLLNPGM(FILAMENT_SIZE "-" ELECTRONICS "-" NOZZLE_TYPE );

    } else if(code_seen_P(PSTR("Lang"))) { // PRUSA Lang
 	  lang_reset();
@ -4542,7 +4545,7 @@ eeprom_update_word((uint16_t*)EEPROM_NOZZLE_DIAMETER_uM,0xFFFF);
        retract(false,retracted_swap[active_extruder]);
       #else
        retract(false);
-       #endif 
+       #endif
      break;
 #endif //FWRETRACT

--- a/Firmware/Sd2Card.cpp
+++ b/Firmware/Sd2Card.cpp
@ -311,13 +311,16 @@ bool Sd2Card::init(uint8_t sckRateID) {
  // must supply min of 74 clock cycles with CS high.
  for (uint8_t i = 0; i < 10; i++) spiSend(0XFF);

+  WRITE(MISO, 1); // temporarily enable the MISO line pullup
  // command to go idle in SPI mode
  while ((status_ = cardCommand(CMD0, 0)) != R1_IDLE_STATE) {
    if (((uint16_t)_millis() - t0) > SD_INIT_TIMEOUT) {
+      WRITE(MISO, 0); // disable the MISO line pullup
      error(SD_CARD_ERROR_CMD0);
      goto fail;
    }
  }
+  WRITE(MISO, 0); // disable the MISO line pullup

  // send 0xFF until 0xFF received to give card some clock cycles
  t0 = (uint16_t)_millis();
--- a/Firmware/cmdqueue.cpp
+++ b/Firmware/cmdqueue.cpp
@ -1,3 +1,4 @@
+#include <util/atomic.h>
 #include "cmdqueue.h"
 #include "cardreader.h"
 #include "ultralcd.h"
@ -26,10 +27,7 @@ bool comment_mode = false;
 char *strchr_pointer; // just a pointer to find chars in the command string like X, Y, Z, E, etc

 ShortTimer serialTimeoutTimer;
-
-long gcode_N = 0;
 long gcode_LastN = 0;
-
 uint32_t sdpos_atomic = 0;


@ -155,7 +153,7 @@ static bool cmdqueue_could_enqueue_front(size_t len_asked)
 // len_asked does not contain the zero terminator size.
 // This function may update bufindw, therefore for the power panic to work, this function must be called
 // with the interrupts disabled!
-static bool cmdqueue_could_enqueue_back(size_t len_asked, bool atomic_update = false)
+static bool __attribute__((noinline)) cmdqueue_could_enqueue_back(size_t len_asked)
 {
    // MAX_CMD_SIZE has to accommodate the zero terminator.
    if (len_asked >= MAX_CMD_SIZE)
@ -165,61 +163,29 @@ static bool cmdqueue_could_enqueue_back(size_t len_asked, bool atomic_update = f
        // Full buffer.
        return false;

-    if (serial_count > 0) {
-        // If there is some data stored starting at bufindw, len_asked is certainly smaller than
-        // the allocated data buffer. Try to reserve a new buffer and to move the already received
-        // serial data.
-        // How much memory to reserve for the commands pushed to the front?
-        // End of the queue, when pushing to the end.
-        size_t endw = bufindw + len_asked + (1 + CMDHDRSIZE);
-        if (bufindw < bufindr)
-            // Simple case. There is a contiguous space between the write buffer and the read buffer.
-            return endw + CMDBUFFER_RESERVE_FRONT <= bufindr;
-        // Otherwise the free space is split between the start and end.
-        if (// Could one fit to the end, including the reserve?
-            endw + CMDBUFFER_RESERVE_FRONT <= sizeof(cmdbuffer) ||
-            // Could one fit to the end, and the reserve to the start?
-            (endw <= sizeof(cmdbuffer) && CMDBUFFER_RESERVE_FRONT <= bufindr))
-            return true;
-        // Could one fit both to the start?
-        if (len_asked + (1 + CMDHDRSIZE) + CMDBUFFER_RESERVE_FRONT <= bufindr) {
-            // Mark the rest of the buffer as used.
-            memset(cmdbuffer+bufindw, 0, sizeof(cmdbuffer)-bufindw);
-            // and point to the start.
-            // Be careful! The bufindw needs to be changed atomically for the power panic & filament panic to work.
-            if (atomic_update)
-                cli();
-            bufindw = 0;
-            if (atomic_update)
-                sei();
-            return true;
-        }
-    } else {
-        // How much memory to reserve for the commands pushed to the front?
-        // End of the queue, when pushing to the end.
-        size_t endw = bufindw + len_asked + (1 + CMDHDRSIZE);
-        if (bufindw < bufindr)
-            // Simple case. There is a contiguous space between the write buffer and the read buffer.
-            return endw + CMDBUFFER_RESERVE_FRONT <= bufindr;
-        // Otherwise the free space is split between the start and end.
-        if (// Could one fit to the end, including the reserve?
-            endw + CMDBUFFER_RESERVE_FRONT <= sizeof(cmdbuffer) ||
-            // Could one fit to the end, and the reserve to the start?
-            (endw <= sizeof(cmdbuffer) && CMDBUFFER_RESERVE_FRONT <= bufindr))
-            return true;
-        // Could one fit both to the start?
-        if (len_asked + (1 + CMDHDRSIZE) + CMDBUFFER_RESERVE_FRONT <= bufindr) {
-            // Mark the rest of the buffer as used.
-            memset(cmdbuffer+bufindw, 0, sizeof(cmdbuffer)-bufindw);
-            // and point to the start.
-            // Be careful! The bufindw needs to be changed atomically for the power panic & filament panic to work.
-            if (atomic_update)
-                cli();
-            bufindw = 0;
-            if (atomic_update)
-                sei();
-            return true;
-        }
+    // If there is some data stored starting at bufindw, len_asked is certainly smaller than
+    // the allocated data buffer. Try to reserve a new buffer and to move the already received
+    // serial data.
+    // How much memory to reserve for the commands pushed to the front?
+    // End of the queue, when pushing to the end.
+    size_t endw = bufindw + len_asked + (1 + CMDHDRSIZE);
+    if (bufindw < bufindr)
+        // Simple case. There is a contiguous space between the write buffer and the read buffer.
+        return endw + CMDBUFFER_RESERVE_FRONT <= bufindr;
+    // Otherwise the free space is split between the start and end.
+    if (// Could one fit to the end, including the reserve?
+        endw + CMDBUFFER_RESERVE_FRONT <= sizeof(cmdbuffer) ||
+        // Could one fit to the end, and the reserve to the start?
+        (endw <= sizeof(cmdbuffer) && CMDBUFFER_RESERVE_FRONT <= bufindr))
+        return true;
+    // Could one fit both to the start?
+    if (len_asked + (1 + CMDHDRSIZE) + CMDBUFFER_RESERVE_FRONT <= bufindr) {
+        // Mark the rest of the buffer as used.
+        memset(cmdbuffer+bufindw, 0, sizeof(cmdbuffer)-bufindw);
+        // and point to the start.
+        // Be careful! The bufindw needs to be changed atomically for the power panic & filament panic to work.
+        ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { bufindw = 0; }
+        return true;
    }
    return false;
 }
@ -371,7 +337,7 @@ void repeatcommand_front()
 void get_command()
 {
    // Test and reserve space for the new command string.
-    if (! cmdqueue_could_enqueue_back(MAX_CMD_SIZE - 1, true))
+    if (! cmdqueue_could_enqueue_back(MAX_CMD_SIZE - 1))
      return;

 	if (MYSERIAL.available() == RX_BUFFER_SIZE - 1) { //compare number of chars buffered in rx buffer with rx buffer size
@ -403,7 +369,7 @@ void get_command()
      cmdbuffer[bufindw+serial_count+CMDHDRSIZE] = 0; //terminate string
      if(!comment_mode){
 		  
-		  gcode_N = 0;
+		  long gcode_N = -1;

 		  // Line numbers must be first in buffer

@ -490,7 +456,7 @@ void get_command()
        // Command is complete: store the current line into buffer, move to the next line.

 		// Store type of entry
-        cmdbuffer[bufindw] = gcode_N ? CMDBUFFER_CURRENT_TYPE_USB_WITH_LINENR : CMDBUFFER_CURRENT_TYPE_USB;
+        cmdbuffer[bufindw] = gcode_N >= 0 ? CMDBUFFER_CURRENT_TYPE_USB_WITH_LINENR : CMDBUFFER_CURRENT_TYPE_USB;

 #ifdef CMDBUFFER_DEBUG
        SERIAL_ECHO_START;
@ -506,7 +472,8 @@ void get_command()
        ++ buflen;

        // Update the processed gcode line
-        gcode_LastN = gcode_N;
+        if (gcode_N >= 0)
+            gcode_LastN = gcode_N;

 #ifdef CMDBUFFER_DEBUG
        SERIAL_ECHOPGM("Number of commands in the buffer: ");
@ -517,7 +484,7 @@ void get_command()
      serial_count = 0; //clear buffer
      // Don't call cmdqueue_could_enqueue_back if there are no characters waiting
      // in the queue, as this function will reserve the memory.
-      if (MYSERIAL.available() == 0 || ! cmdqueue_could_enqueue_back(MAX_CMD_SIZE-1, true))
+      if (MYSERIAL.available() == 0 || ! cmdqueue_could_enqueue_back(MAX_CMD_SIZE-1))
          return;
    } // end of "end of line" processing
    else {
@ -615,7 +582,7 @@ void get_command()
      if(card.eof()) break;

      // The following line will reserve buffer space if available.
-      if (! cmdqueue_could_enqueue_back(MAX_CMD_SIZE-1, true))
+      if (! cmdqueue_could_enqueue_back(MAX_CMD_SIZE-1))
          return;
    }
    else
--- a/Firmware/cmdqueue.h
+++ b/Firmware/cmdqueue.h
@ -52,7 +52,6 @@ extern int serial_count;
 extern bool comment_mode;
 extern char *strchr_pointer;

-extern long gcode_N;
 extern long gcode_LastN;

 extern bool cmdqueue_pop_front();
--- a/Firmware/eeprom.cpp
+++ b/Firmware/eeprom.cpp
@ -115,8 +115,8 @@ if (eeprom_read_byte((uint8_t*)EEPROM_PINDA_TEMP_COMPENSATION) == 0xff) eeprom_u
 //! | 1     | Smooth2   |
 //! | 2     | Textur1   |
 //! | 3     | Textur2   |
-//! | 4     | Satin 1   |
-//! | 5     | Satin 2   |
+//! | 4     | Satin     |
+//! | 5     | NylonPA   |
 //! | 6     | Custom1   |
 //! | 7     | Custom2   |
 //!
@ -134,17 +134,23 @@ void eeprom_default_sheet_name(uint8_t index, SheetName &sheetName)
    {
        strcpy_P(sheetName.c, PSTR("Textur"));
    }
+    else if (index < 5)
+    {
+        strcpy_P(sheetName.c, PSTR("Satin  "));
+    }
    else if (index < 6)
    {
-        strcpy_P(sheetName.c, PSTR("Satin "));
+        strcpy_P(sheetName.c, PSTR("NylonPA"));
    }
    else
    {
        strcpy_P(sheetName.c, PSTR("Custom"));
    }
-
-    sheetName.c[6] = '0' + ((index % 2)+1);
-    sheetName.c[7] = '\0';
+    if (index <4 || index >5)
+    {
+        sheetName.c[6] = '0' + ((index % 2)+1);
+        sheetName.c[7] = '\0';
+    }
 }

 //! @brief Get next initialized sheet
--- a/Firmware/eeprom.h
+++ b/Firmware/eeprom.h
@ -4,7 +4,7 @@
 * @author 3d-gussner
 */
 /** \ingroup eeprom_table */
- 
+
 //! _This is a EEPROM table of currently implemented in Prusa firmware (dynamically generated from doxygen)._


@ -37,29 +37,29 @@ typedef struct
 static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEPROM_SHEETS_SIZEOF.");
 #endif
 /** @defgroup eeprom_table EEPROM Table
- *  
- 
+ *
+
  ---------------------------------------------------------------------------------
  EEPROM 8-bit Empty value = 0xFFh 255
-  
+
  EEPROM 16-bit Empty value = 0xFFFFh 65535
-  
+
  _Italic = unused or default_
-  
+
  __Bold = Status__
-  
-  In Default/FactoryReset column the 
-  
-   - __L__		Language
-   - __S__ 		Statistics
-   - __P__ 		Shipping prep
-   - __M__ 		Service/Maintenance prep
-   - __S/P__	Statistics and Shipping prep
-   
+
+  In Default/FactoryReset column the
+
+   - __L__      Language
+   - __S__      Statistics
+   - __P__      Shipping prep
+   - __M__      Service/Maintenance prep
+   - __S/P__    Statistics and Shipping prep
+
  will overwrite existing values to 0 or default.
  A FactoryReset All Data will overwrite the whole EEPROM with ffh and some values will be initialized automatically,
  others need a reset / reboot.
-  
+
  ---------------------------------------------------------------------------------
  How can you use the debug codes?
  - Serial terminal like Putty.
@ -67,281 +67,289 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
  - _Pronterface_ does __not__ support D-codes

  ### !!! D-codes are case sensitive so please don't use upper case A,C or X in the address you want to read !!!
-   
-  #### Useful tools/links:
-  To convert hex to ascii 		https://www.rapidtables.com/convert/number/hex-to-ascii.html
-  
-  To convert hex to dec 		https://www.rapidtables.com/convert/number/hex-to-decimal.html
-  
-  Version: 1.0.1
-  
-  ---------------------------------------------------------------------------------
-  
-  
-| Address begin		| Bit/Type 	| Name 									| Valid values	| Default/FactoryReset	| Description 										| Gcode/Function| Debug code
-| :--				| :-- 		| :-- 									| :--:			| :--:					| :--												| :--:			| :--:
-| 0x0FFFh 4095		| uchar    	| EEPROM_SILENT 						| 00h 0			| ffh 255				| TMC Stealth mode: __off__ / miniRambo Power mode	| LCD menu		| D3 Ax0fff C1
-| ^ 				| ^ 		| ^										| 01h 1			| ^						| TMC Stealth mode: __on__ / miniRambo Silent mode	| ^				| ^ 
-| ^ 				| ^ 		| ^										| 02h 2			| ^						| miniRambo Auto mode								| ^				| ^ 
-| 0x0FFEh 4094		| uchar    	| EEPROM_LANG 							| 00h 0			| ffh 255		__L__	| English / LANG_ID_PRI								| LCD menu		| D3 Ax0ffe C1 
-| ^ 				| ^ 		| ^										| 01h 1			| ^						| Other language LANG_ID_SEC						| ^ 			| ^
-| 0x0FFCh 4092		| uint16	| EEPROM_BABYSTEP_X						| ???			| ff ffh 65535			| Babystep for X axis _unsued_						| ??? 			| D3 Ax0ffc C2
-| 0x0FFAh 4090		| uint16	| EEPROM_BABYSTEP_Y						| ???			| ff ffh 65535			| Babystep for Y axis _unsued_						| ^ 			| D3 Ax0ffa C2
-| 0x0FF8h 4088		| uint16	| EEPROM_BABYSTEP_Z						| ???			| ff ffh 65535			| Babystep for Z axis _lagacy_						| ^ 			| D3 Ax0ff8 C2
-| ^ 				| ^ 		| ^										| ^				| ^						| multiple values stored now in EEPROM_Sheets_base	| ^ 			| ^
-| 0x0FF7h 4087		| uint8		| EEPROM_CALIBRATION_STATUS				| ffh 255		| ffh 255				| Assembled _default_								| ??? 			| D3 Ax0ff7 C1
-| ^ 				| ^ 		| ^										| 01h 1			| ^						| Calibrated										| ^ 			| ^
-| ^ 				| ^ 		| ^										| e6h 230		| ^						| needs Live Z adjustment							| ^ 			| ^
-| ^ 				| ^ 		| ^										| f0h 240		| ^				__P__	| needs Z calibration								| ^ 			| ^
-| ^ 				| ^ 		| ^										| fah 250		| ^						| needs XYZ calibration								| ^ 			| ^ 
-| ^ 				| ^ 		| ^										| 00h 0			| ^						| Unknown											| ^ 			| ^
-| 0x0FF5h 4085		| uint16	| EEPROM_BABYSTEP_Z0					| ???			| ff ffh 65535			| Babystep for Z ???								| ??? 			| D3 Ax0ff5 C2
-| 0x0FF1h 4081		| uint32	| EEPROM_FILAMENTUSED					| ???			| 00 00 00 00h 0 __S/P__| Filament used in meters							| ??? 			| D3 Ax0ff1 C4
-| 0x0FEDh 4077		| uint32	| EEPROM_TOTALTIME						| ???			| 00 00 00 00h 0 __S/P__| Total print time									| ??? 			| D3 Ax0fed C4
-| 0x0FE5h 4069		| float		| EEPROM_BED_CALIBRATION_CENTER			| ???			| ff ff ff ffh			| ???											 	| ??? 			| D3 Ax0fe5 C8
-| 0x0FDDh 4061		| float		| EEPROM_BED_CALIBRATION_VEC_X			| ???			| ff ff ff ffh			| ???											 	| ??? 			| D3 Ax0fdd C8
-| 0x0FD5h 4053		| float		| EEPROM_BED_CALIBRATION_VEC_Y			| ???			| ff ff ff ffh			| ???											 	| ??? 			| D3 Ax0fd5 C8
-| 0x0FC5h 4037		| int16		| EEPROM_BED_CALIBRATION_Z_JITTER		| ???			| ff ffh 65535			| ???											 	| ??? 			| D3 Ax0fc5 C16
-| 0x0FC4h 4036		| bool		| EEPROM_FARM_MODE						| 00h 0			| ffh 255 		__P__	| Prusa farm mode: __off__							| G99 			| D3 Ax0fc4 C1
-| ^					| ^			| ^										| 01h 1			| ^						| Prusa farm mode: __on__							| G98			| ^
-| 0x0FC3h 4035		| free		| _EEPROM_FREE_NR1_						| ???			| ffh 255				| _Free EEPROM space_								| _free space_	| D3 Ax0fc3 C1
-| 0x0FC1h 4033		| ???		| EEPROM_FARM_NUMBER					| 000-999		| ff ffh / 000	__P__	| Prusa farm number	_only 0-9 are allowed: 000-999_	| LCD menu		| D3 Ax0fc1 C2
-| 0x0FC0h 4032		| bool		| EEPROM_BED_CORRECTION_VALID			| 00h 0			| 00h 0					| Bed correction invalid							| ??? 			| D3 Ax0fc0 C1
-| ^					| ^			| ^										| ffh 255		| 						| Bed correction valid								| ??? 			| ^
-| 0x0FBFh 4031		| char		| EEPROM_BED_CORRECTION_LEFT			| 00h ffh		| 00h 0					| Bed manual correction left						| LCD menu 		| D3 Ax0fbf C1
-| ^					| ^			| ^										| ^				| ^						| At this moment limited to +-100um					| G80 Lxxx 			| ^
-| 0x0FBEh 4030		| char		| EEPROM_BED_CORRECTION_RIGHT			| 00h ffh		| 00h 0					| Bed manual correction right						| LCD menu 		| D3 Ax0fbe C1
-| ^					| ^			| ^										| ^				| ^						| At this moment limited to +-100um					| G80 Rxxx 			| ^
-| 0x0FBDh 4029		| char		| EEPROM_BED_CORRECTION_FRONT			| 00h ffh		| 00h 0					| Bed manual correction front						| LCD menu 		| D3 Ax0fbd C1
-| ^					| ^			| ^										| ^				| ^						| At this moment limited to +-100um					| G80 Fxxx 			| ^
-| 0x0FBCh 4028		| char		| EEPROM_BED_CORRECTION_BACK			| 00h ffh		| 00h 0					| Bed manual correction back						| LCD menu 		| D3 Ax0fbc C1
-| ^					| ^			| ^										| ^				| ^						| At this moment limited to +-100um					| G80 Bxxx 			| ^
-| 0x0FBBh 4027		| bool		| EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY	| 00h 0			| ffh 255				| Toshiba Air: __off__								| LCD menu 		| D3 Ax0fbb C1
-| ^					| ^			| ^										| 01h 1			| ^						| Toshiba Air: __on__								| ^ 			| ^	
-| 0x0FBAh 4026		| uchar		| EEPROM_PRINT_FLAG						| ???			| ???					| _unsued_											| ??? 			| D3 Ax0fba C1
-| 0x0FB0h 4016		| int16		| EEPROM_PROBE_TEMP_SHIFT				| ???			| ???					| ???												| ??? 			| D3 Ax0fb0 C10
-| 0x0FAFh 4015		| bool		| EEPROM_TEMP_CAL_ACTIVE				| 00h 0			| 00h 0					| PINDA Temp cal.: __inactive__						| LCD menu		| D3 Ax0faf C1
-| ^					| ^			| ^										| ffh 255		| ^						| PINDA Temp cal.: __active__						| ^ 			| ^
-| 0x0FA7h 4007		| ???		| _EEPROM_FREE_NR6_						| ???			| 						| _Free EEPROM space_								| ??? 			| D3 Ax0fae C8
-| ^					| ^			| ^										| ^				| 00 00 00 00h			| ^													| ^ 			| ^
-| 0x0FA6h 4006		| uint8		| EEPROM_CALIBRATION_STATUS_PINDA		| 00h 0			| ffh 255				| PINDA Temp: __not calibrated__					| ??? 			| D3 Ax0fa6 C1
-| ^					| ^			| ^										| 01h 1			| ^						| PINDA Temp: __calibrated__						| ^ 			| ^
-| 0x0FA5h 4005		| uint8		| EEPROM_UVLO							| 00h 0			| ffh 255				| Power Panic flag: __inactive__					| ??? 			| D3 Ax0fa5 C1
-| ^					| ^			| ^										| 01h 1			| ^						| Power Panic flag: __active__						| ^ 			| ^
-| ^					| ^			| ^										| 02h 2			| ^						| Power Panic flag: __???__							| ^ 			| ^
-| 0x0F9Dh 3997		| float		| EEPROM_UVLO_CURRENT_POSITION			| ???			| ffh 255				| Power Panic position 								| ??? 			| D3 Ax0f9d C8
-| 0x0F95h 3989		| char		| EEPROM_FILENAME						| ???			| ffh 255				| Power Panic Filename 								| ??? 			| D3 Ax0f95 C8
-| 0x0F91h 3985		| uint32	| EEPROM_FILE_POSITION					| ???			| ff ff ff ffh			| Power Panic File Position							| ??? 			| D3 Ax0f91 C4
-| 0x0F8Dh 3981		| float		| EEPROM_UVLO_CURRENT_POSITION_Z		| ???			| ff ff ff ffh			| Power Panic Z Position	 						| ^ 			| D3 Ax0f8d C4
-| 0x0F8Ch 3980		| ???		| EEPROM_UVLO_UNUSED_001				| ??? 			| ffh 255				| Power Panic _unused_								| ^ 			| D3 Ax0f8c C1
-| 0x0F8Bh 3979		| uint8		| EEPROM_UVLO_TARGET_BED				| ???			| ffh 255				| Power Panic Bed temperature						| ^ 			| D3 Ax0f8b C1
-| 0x0F89h 3977		| uint16	| EEPROM_UVLO_FEEDRATE					| ???			| ff ffh 65535			| Power Panic Feedrate								| ^ 			| D3 Ax0f89 C2
-| 0x0F88h 3976		| uint8		| EEPROM_UVLO_FAN_SPEED					| ???			| ffh 255				| Power Panic Fan speed								| ^ 			| D3 Ax0f88 C1
-| 0x0F87h 3975		| uint8		| EEPROM_FAN_CHECK_ENABLED				| 00h 0			| ???					| Fan Check __disabled__							| LCD menu		| D3 Ax0f87 C1
-| ^					| ^			| ^										| 01h 1			| ffh 255				| Fan Check __enabled__ 							| ^ 			| ^
-| 0x0F75h 3957		| uint16	| EEPROM_UVLO_MESH_BED_LEVELING			| ???			| ff ffh 65535			| Power Panic Mesh Bed Leveling						| ???			| D3 Ax0f75 C18 
-| 0x0F73h 3955		| uint16	| EEPROM_UVLO_Z_MICROSTEPS				| ???			| ff ffh 65535			| Power Panic Z microsteps							| ???			| D3 Ax0f73 C2 
-| 0x0F72h 3954		| uint8		| EEPROM_UVLO_E_ABS						| ???			| ffh 255				| Power Panic ??? position							| ???			| D3 Ax0f72 C1
-| 0x0F6Eh 3950		| float		| EEPROM_UVLO_CURRENT_POSITION_E		| ???			| ff ff ff ffh			| Power Panic E position							| ???			| D3 Ax0f6e C4
-| 0x0F6Ch 3948		| uint16_t	| EEPROM_UVLO_SAVED_SEGMENT_IDX			| all			| ff ffh 65535			| Power Panic index of multi-segment move			| ???			| D3 Ax0f6c C2
-| 0x0F6Bh 3947		| ???		| _EEPROM_FREE_NR4_						| ???			| ffh 255				| _Free EEPROM space_								| _free space_	| D3 Ax0f6b C1
-| 0x0F6Ah 3946		| ???		| _EEPROM_FREE_NR5_						| ???			| ffh 255				| _Free EEPROM space_								| _free space_	| D3 Ax0f6a C1
-| 0x0F69h 3945		| uint8		| EEPROM_CRASH_DET						| ffh 255		| ffh 255				| Crash detection: __enabled__						| LCD menu		| D3 Ax0f69 C1
-| ^					| ^			| ^										| 00h 0			| ^						| Crash detection: __disabled__						| LCD menu		| ^
-| 0x0F68h 3944		| uint8		| EEPROM_CRASH_COUNT_Y					| 00h-ffh 0-255	| ffh 255		__S/P__	| Crashes detected on y axis						| ???			| D3 Ax0f68 C1
-| 0x0F67h 3943		| uint8		| EEPROM_FSENSOR						| 01h 1			| ffh 255		__P__	| Filament sensor: __enabled__						| LCD menu		| D3 Ax0f67 C1
-| ^					| ^			| ^										| 00h 0			| ^						| Filament sensor: __disabled__						| LCD menu		| ^
-| 0x0F65h 3942		| uint8		| EEPROM_CRASH_COUNT_X					| 00h-ffh 0-255	| ffh 255		__S/P__	| Crashes detected on x axis						| ???			| D3 Ax0f66 C1
-| 0x0F65h 3941		| uint8		| EEPROM_FERROR_COUNT					| 00h-ffh 0-255	| ffh 255		__S/P__	| Filament sensor error counter						| ???			| D3 Ax0f65 C1
-| 0x0F64h 3940		| uint8		| EEPROM_POWER_COUNT					| 00h-ffh 0-255	| ffh 255		__S/P__	| Power failure counter								| ???			| D3 Ax0f64 C1
-| 0x0F60h 3936		| float		| EEPROM_XYZ_CAL_SKEW					| ???			| ff ff ff ffh			| XYZ skew value									| ???			| D3 Ax0f60 C4
-| 0x0F5Fh 3935		| uint8		| EEPROM_WIZARD_ACTIVE					| 01h 1			| 01h 1			__P__	| Wizard __active__									| ???			| D3 Ax0f5f C1
-| ^					| ^			| ^										| 00h 0			| ^						| Wizard __inactive__								| ^ 			| ^
-| ^					| ^			| ^										| 02h 2			| 02h 2			__M__	| Wizard active - Z cal after shipping/service prep | ^ 			| ^
-| 0x0F5Dh 3933		| uint16	| EEPROM_BELTSTATUS_X					| ???			| ff ffh				| X Beltstatus 										| ???			| D3 Ax0f5d C2
-| 0x0F5Bh 3931		| uint16	| EEPROM_BELTSTATUS_Y					| ???			| ff ffh				| Y Beltstatus 										| ???			| D3 Ax0f5b C2
-| 0x0F5Ah 3930		| uint8		| EEPROM_DIR_DEPTH						| 00h-ffh 0-255	| ffh 255				| Directory depth									| ???			| D3 Ax0f5a C1
-| 0x0F0Ah 3850		| uint8		| EEPROM_DIRS							| ???			| ffh 255				| Directories ???									| ???			| D3 Ax0f0a C80
-| 0x0F09h 3849		| uint8		| EEPROM_SD_SORT						| 00h 0			| ffh 255				| SD card sort by: 	__time__						| LCD menu		| D3 Ax0f09 C1
-| ^					| ^			| ^										| 01h 1			| ^						| SD card sort by: 	__alphabet__					| LCD menu		| ^
-| ^					| ^			| ^										| 02h 1			| ^						| SD card:			__not sorted__					| LCD menu		| ^
-| 0x0F08h 3848		| uint8		| EEPROM_SECOND_SERIAL_ACTIVE			| 00h 0			| ffh 255				| RPi Port: __disabled__							| LCD menu		| D3 Ax0f08 C1
-| ^					| ^			| ^										| 01h 1			| ^						| RPi Port: __enabled__								| LCD menu		| ^
-| 0x0F07h 3847		| uint8		| EEPROM_FSENS_AUTOLOAD_ENABLED			| 01h 1			| ffh 255		__P__	| Filament autoload: __enabled__					| LCD menu		| D3 Ax0f07 C1
-| ^					| ^			| ^										| 00h 0			| ^						| Filament autoload: __disabled__					| LCD menu		| ^
-| 0x0F05h 3845		| uint16	| EEPROM_CRASH_COUNT_X_TOT				| 0000-fffe		| ff ffh		__S/P__	| Total crashes on x axis	  						| ???			| D3 Ax0f05 C2
-| 0x0F03h 3843		| uint16	| EEPROM_CRASH_COUNT_Y_TOT				| 0000-fffe		| ff ffh		__S/P__	| Total crashes on y axis  							| ???			| D3 Ax0f03 C2
-| 0x0F01h 3841		| uint16	| EEPROM_FERROR_COUNT_TOT				| 0000-fffe		| ff ffh		__S/P__	| Total filament sensor errors 						| ???			| D3 Ax0f01 C2
-| 0x0EFFh 3839		| uint16	| EEPROM_POWER_COUNT_TOT				| 0000-fffe		| ff ffh		__S/P__	| Total power failures		  						| ???			| D3 Ax0eff C2
-| 0x0EFEh 3838		| uint8		| EEPROM_TMC2130_HOME_X_ORIGIN			| ???			| ffh 255				| ???						  						| ???			| D3 Ax0efe C1
-| 0x0EFDh 3837		| uint8		| EEPROM	MC2130_HOME_X_BSTEPS		| ???			| ffh 255		    	| ???						  						| ???			| D3 Ax0efd C1
-| 0x0EFCh 3836		| uint8		| EEPROM_TMC2130_HOME_X_FSTEPS			| ???			| ffh 255				| ???						  						| ???			| D3 Ax0efc C1
-| 0x0EFBh 3835		| uint8		| EEPROM_TMC2130_HOME_Y_ORIGIN			| ???			| ffh 255				| ???						  						| ???			| D3 Ax0efb C1
-| 0x0EFAh 3834		| uint8		| EEPROM_TMC2130_HOME_Y_BSTEPS			| ???			| ffh 255				| ???						  						| ???			| D3 Ax0efa C1
-| 0x0EF9h 3833		| uint8		| EEPROM_TMC2130_HOME_Y_FSTEPS			| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef9 C1
-| 0x0EF8h 3832		| uint8		| EEPROM_TMC2130_HOME_ENABLED			| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef8 C1
-| 0x0EF7h 3831		| uint8		| EEPROM_TMC2130_WAVE_X_FAC				| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef7 C1
-| 0x0EF6h 3830		| uint8		| EEPROM_TMC2130_WAVE_Y_FAC				| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef6 C1
-| 0x0EF5h 3829		| uint8		| EEPROM_TMC2130_WAVE_Z_FAC				| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef5 C1
-| 0x0EF4h 3828		| uint8		| EEPROM_TMC2130_WAVE_E_FAC				| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef4 C1
-| 0x0EF3h 3827		| uint8		| EEPROM_TMC2130_X_MRES					| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef3 C1
-| 0x0EF2h 3826		| uint8		| EEPROM_TMC2130_Y_MRES					| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef2 C1
-| 0x0EF1h 3825		| uint8		| EEPROM_TMC2130_Z_MRES					| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef1 C1
-| 0x0EF0h 3824		| uint8		| EEPROM_TMC2130_E_MRES					| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef0 C1
-| 0x0EEE 3822		| uint16 	| EEPROM_PRINTER_TYPE					| ???			| ff ffh 65535			| Printer Type										| ???			| D3 Ax0eee C2
-| ^					| ^			| ^										| 64 00h 100	| ^						| PRINTER_MK1										| ???			| ^
-| ^					| ^			| ^										| c8 00h 200	| ^						| PRINTER_MK2										| ???			| ^
-| ^					| ^			| ^										| c9 00h 201	| ^						| PRINTER_MK2 with MMU1								| ???			| ^
-| ^					| ^			| ^										| ca 00h 202	| ^						| PRINTER_MK2S										| ???			| ^
-| ^					| ^			| ^										| cb 00h 203	| ^						| PRINTER_MK2S with MMU1							| ???			| ^
-| ^					| ^			| ^										| fa 00h 250	| ^						| PRINTER_MK2.5										| ???			| ^
-| ^					| ^			| ^										| 1a 4fh 20250	| ^						| PRINTER_MK2.5 with MMU2							| ???			| ^
-| ^					| ^			| ^										| fc 00h 252	| ^						| PRINTER_MK2.5S									| ???			| ^
-| ^					| ^			| ^										| 1c 4fh 20252	| ^						| PRINTER_MK2.5S with MMU2S							| ???			| ^
-| ^					| ^			| ^										| 2c 01h 300	| ^						| PRINTER_MK3										| ???			| ^
-| ^					| ^			| ^										| 4c 4fh 20300	| ^						| PRINTER_MK3 with MMU2								| ???			| ^
-| ^					| ^			| ^										| 2e 01h 302	| ^						| PRINTER_MK3S										| ???			| ^
-| ^					| ^			| ^										| 4e 4fh 20302	| ^						| PRINTER_MK3S with MMU2S							| ???			| ^
-| 0x0EEC 3820		| uint16	| EEPROM_BOARD_TYPE						| ???			| ff ffh 65535			| Board Type										| ???			| D3 Ax0eec C2
-| ^					| ^			| ^										| c8 00h 200	| ^						| BOARD_RAMBO_MINI_1_0								| ???			| ^
-| ^					| ^			| ^										| cb 00h 203	| ^						| BOARD_RAMBO_MINI_1_3								| ???			| ^
-| ^					| ^			| ^										| 36 01h 310	| ^						| BOARD_EINSY_1_0a									| ???			| ^
-| 0x0EE8 3816		| float		| EEPROM_EXTRUDER_MULTIPLIER_0			| ???			| ff ff ff ffh			| Power panic Extruder 0 multiplier					| ???			| D3 Ax0ee8 C4
-| 0x0EE4 3812		| float		| EEPROM_EXTRUDER_MULTIPLIER_1			| ???			| ff ff ff ffh			| Power panic Extruder 1 multiplier					| ???			| D3 Ax0ee4 C4
-| 0x0EE0 3808		| float		| EEPROM_EXTRUDER_MULTIPLIER_2			| ???			| ff ff ff ffh			| Power panic Extruder 2 multiplier					| ???			| D3 Ax0ee0 C4
-| 0x0EDE 3806		| uint16	| EEPROM_EXTRUDEMULTIPLY				| ???			| ff ffh 65535			| Power panic Extruder multiplier					| ???			| D3 Ax0ede C2
-| 0x0EDA 3802		| float		| EEPROM_UVLO_TINY_CURRENT_POSITION_Z	| ???			| ff ff ff ffh			| Power panic Z position							| ???			| D3 Ax0eda C4
-| 0x0ED8 3800		| uint16	| EEPROM_UVLO_TARGET_HOTEND				| ???			| ff ffh 65535			| Power panic target Hotend temperature				| ???			| D3 Ax0ed8 C2
-| 0x0ED7 3799		| uint8		| EEPROM_SOUND_MODE						| 00h 0			| ffh 255				| Sound mode: __loud__								| ???			| D3 Ax0ed7 C1
-| ^					| ^			| ^										| 01h 1			| ^						| Sound mode: __once__								| ^				| ^
-| ^					| ^			| ^										| 02h 1			| ^						| Sound mode: __silent__							| ^				| ^
-| ^					| ^			| ^										| 03h 1			| ^						| Sound mode: __assist__							| ^				| ^
-| 0x0ED6 3798		| bool		| EEPROM_AUTO_DEPLETE					| 01h 1			| ffh 255				| MMU2/s autodeplete: __on__						| ???			| D3 Ax0ed6 C1
-| ^					| ^			| ^										| 00h 0			| ^						| MMU2/s autodeplete: __off__						| ^				| ^
-| 0x0ED5 3797		| bool		| EEPROM_FSENS_OQ_MEASS_ENABLED			| ???			| ffh 255				| PAT1925 ???										| ???			| D3 Ax0ed5 C1
-| ^					| ^			| ^										| ???			| ^						| PAT1925 ???										| ^				| ^
-| 0x0ED3 3795		| uint16	| EEPROM_MMU_FAIL_TOT					| ???			| ff ffh 65535	__S/P__	| MMU2/s total failures								| ???			| D3 Ax0ed3 C2
-| 0x0ED2 3794		| uint8		| EEPROM_MMU_FAIL						| ???			| ffh 255		__S/P__	| MMU2/s fails during print							| ???			| D3 Ax0ed2 C1
-| 0x0ED0 3792		| uint16	| EEPROM_MMU_LOAD_FAIL_TOT				| ???			| ff ffh 65535	__S/P__	| MMU2/s total load failures						| ???			| D3 Ax0ed0 C2
-| 0x0ECF 3791		| uint8		| EEPROM_MMU_LOAD_FAIL					| ???			| ffh 255		__S/P__	| MMU2/s load failures during print					| ???			| D3 Ax0ecf C1
-| 0x0ECE 3790		| uint8		| EEPROM_MMU_CUTTER_ENABLED				| 00h 0			| ffh 255				| MMU2/s cutter: __disabled__						| LCD menu		| D3 Ax0ece C1
-| ^					| ^			| ^										| 01h 1			| ^						| MMU2/s cutter: __enabled__						| ^				| ^
-| ^					| ^			| ^										| 02h 2			| ^						| MMU2/s cutter: __always__							| ^				| ^
-| 0x0DAE 3502		| uint16	| EEPROM_UVLO_MESH_BED_LEVELING_FULL	| ???			| ff ffh 65535			| Power panic Mesh bed leveling points 				| ???			| D3 Ax0dae C288
-| 0x0DAD 3501		| uint8		| EEPROM_MBL_TYPE						| ???			| ffh 255				| Mesh bed leveling precision 		_unused atm_	| ???			| D3 Ax0dad C1
-| 0x0DAC 3500		| bool		| EEPROM_MBL_MAGNET_ELIMINATION			| 01h 1			| ffh 255				| Mesh bed leveling does: __ignores__ magnets		| LCD menu		| D3 Ax0dac C1
-| ^					| ^			| ^										| 00h 0			| ^						| Mesh bed leveling does: __NOT ignores__ magnets	| ^				| ^
-| 0x0DAB 3499		| uint8		| EEPROM_MBL_POINTS_NR					| 03h 3			| ffh 255				| Mesh bed leveling points: __3x3__					| LCD menu		| D3 Ax0dab C1
-| ^					| ^			| ^										| 07h 7			| ^						| Mesh bed leveling points: __7x7__					| ^				| ^
-| 0x0DAA 3498		| uint8		| EEPROM_MBL_PROBE_NR					| 03h 3			| ffh 255				| MBL times measurements for each point: __3__ 		| LCD menu		| D3 Ax0daa C1
-| ^					| ^			| ^										| 05h 5			| ^						| MBL times measurements for each point: __5__		| ^				| ^
-| ^					| ^			| ^										| 01h 1			| ^						| MBL times measurements for each point: __1__		| ^				| ^
-| 0x0DA9 3497		| uint8		| EEPROM_MMU_STEALTH					| 01h 1			| ffh 255				| MMU2/s Silent mode: __on__						| ???			| D3 Ax0da9 C1
-| ^					| ^			| ^										| 00h 0			| ^						| MMU2/s Silent mode: __off__						| ^				| ^
-| 0x0DA8 3496		| uint8		| EEPROM_CHECK_MODE						| 01h 1			| ffh 255				| Check mode for nozzle is: __warn__				| LCD menu		| D3 Ax0da8 C1
-| ^					| ^			| ^										| 02h 0			| ^						| Check mode for nozzle is: __strict__				| ^				| ^
-| ^					| ^			| ^										| 00h 0			| ^						| Check mode for nozzle is: __none__				| ^				| ^
-| 0x0DA7 3495		| uint8		| EEPROM_NOZZLE_DIAMETER				| 28h 40		| ffh 255				| Nozzle diameter is: __40 or 0.40mm__				| LCD menu		| D3 Ax0da7 C1
-| ^					| ^			| ^										| 3ch 60		| ^						| Nozzle diameter is: __60 or 0.60mm__				| ^				| ^
-| ^					| ^			| ^										| 3ch 80		| ^						| Nozzle diameter is: __80 or 0.80mm__				| ^				| ^
-| ^					| ^			| ^										| 19h 25		| ^						| Nozzle diameter is: __25 or 0.25mm__				| ^				| ^
-| 0x0DA5 3493		| uint16	| EEPROM_NOZZLE_DIAMETER_uM				| 9001h			| ff ffh 65535			| Nozzle diameter is: __400um__						| LCD menu		| D3 Ax0da5 C2
-| ^					| ^			| ^										| 5802h			| ^						| Nozzle diameter is: __600um__						| ^				| ^
-| ^					| ^			| ^										| 2003h			| ^						| Nozzle diameter is: __800um__						| ^				| ^
-| ^					| ^			| ^										| fa00h			| ^						| Nozzle diameter is: __250um__						| ^				| ^
-| 0x0DA4 3492		| uint8		| EEPROM_CHECK_MODEL					| 01h 1			| ffh 255				| Check mode for printer model is: __warn__			| LCD menu		| D3 Ax0da4 C1
-| ^					| ^			| ^										| 02h 0			| ^						| Check mode for printer model is: __strict__		| ^				| ^
-| ^					| ^			| ^										| 00h 0			| ^						| Check mode for printer model is: __none__			| ^				| ^
-| 0x0DA3 3491		| uint8		| EEPROM_CHECK_VERSION					| 01h 1			| ffh 255				| Check mode for firmware is: __warn__				| LCD menu		| D3 Ax0da3 C1
-| ^					| ^			| ^										| 02h 0			| ^						| Check mode for firmware is: __strict__			| ^				| ^
-| ^					| ^			| ^										| 00h 0			| ^						| Check mode for firmware is: __none__				| ^				| ^
-| 0x0DA2 3490		| uint8		| EEPROM_CHECK_GCODE					| 01h 1			| ffh 255				| Check mode for gcode is: __warn__ _unused atm_	| LCD menu		| D3 Ax0da2 C1
-| ^					| ^			| ^										| 02h 0			| ^						| Check mode for gcode is: __strict__ _unused atm_	| ^				| ^
-| ^					| ^			| ^										| 00h 0			| ^						| Check mode for gcode is: __none__ _unused atm_	| ^				| ^
-| 0x0D49 3401		| uint16	| EEPROM_SHEETS_BASE					| ???			| ffh 255				| ???												| LCD menu		| D3 Ax0d49 C89
-| 0x0D49 3401		| char		| _1st Sheet block_						| 536d6f6f746831| ffffffffffffff		| 1st sheet - Name: 	_Smooth1_					| ^				| D3 Ax0d49 C7
-| 0x0D50 3408		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 1st sheet - Z offset 								| ^				| D3 Ax0d50 C2	
-| 0x0D52 3410		| uint8		| ^										| 00h 0			| ffh 255				| 1st sheet - bed temp 								| ^				| D3 Ax0d52 C1	
-| 0x0D53 3411		| uint8		| ^										| 00h 0			| ffh 255				| 1st sheet - PINDA temp 							| ^				| D3 Ax0d53 C1	
-| 0x0D54 3412		| char		| _2nd Sheet block_						| 536d6f6f746832| ffffffffffffff		| 2nd sheet - Name: 	_Smooth2_					| ^				| D3 Ax0d54 C7
-| 0x0D5B 3419		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 2nd sheet - Z offset 								| ^				| D3 Ax0d5b C2	
-| 0x0D5D 3421		| uint8		| ^										| 00h 0			| ffh 255				| 2nd sheet - bed temp 								| ^				| D3 Ax0d5d C1	
-| 0x0D5E 3422		| uint8		| ^										| 00h 0			| ffh 255				| 2nd sheet - PINDA temp 							| ^				| D3 Ax0d5e C1	
-| 0x0D5F 3423		| char		| _3rd Sheet block_						| 54657874757231| ffffffffffffff		| 3rd sheet - Name: 	_Textur1_					| ^				| D3 Ax0d5f C7
-| 0x0D66 3430		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 3rd sheet - Z offset 								| ^				| D3 Ax0d66 C2	
-| 0x0D68 3432		| uint8		| ^										| 00h 0			| ffh 255				| 3rd sheet - bed temp 								| ^				| D3 Ax0d68 C1	
-| 0x0D69 3433		| uint8		| ^										| 00h 0			| ffh 255				| 3rd sheet - PINDA temp 							| ^				| D3 Ax0d69 C1	
-| 0x0D6A 3434		| char		| _4th Sheet block_						| 54657874757232| ffffffffffffff		| 4th sheet - Name: 	_Textur2_					| ^				| D3 Ax0d6a C7
-| 0x0D71 3441		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 4th sheet - Z offset 								| ^				| D3 Ax0d71 C2	
-| 0x0D73 3443		| uint8		| ^										| 00h 0			| ffh 255				| 4th sheet - bed temp 								| ^				| D3 Ax0d73 C1	
-| 0x0D74 3444		| uint8		| ^										| 00h 0			| ffh 255				| 4th sheet - PINDA temp 							| ^				| D3 Ax0d74 C1	
-| 0x0D75 3445		| char		| _5th Sheet block_						| 536174696e2031| ffffffffffffff		| 5th sheet - Name: 	_Satin 1_					| ^				| D3 Ax0d75 C7
-| 0x0D7C 3452		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 5th sheet - Z offset 								| ^				| D3 Ax0d7c C2	
-| 0x0D7E 3454		| uint8		| ^										| 00h 0			| ffh 255				| 5th sheet - bed temp 								| ^				| D3 Ax0d7e C1	
-| 0x0D7F 3455		| uint8		| ^										| 00h 0			| ffh 255				| 5th sheet - PINDA temp 							| ^				| D3 Ax0d7f C1	
-| 0x0D80 3456		| char		| _6th Sheet block_						| 536174696e2032| ffffffffffffff		| 6th sheet - Name: 	_Satin 2_					| ^				| D3 Ax0d80 C7
-| 0x0D87 3463		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 6th sheet - Z offset 								| ^				| D3 Ax0d87 C2	
-| 0x0D89 3465		| uint8		| ^										| 00h 0			| ffh 255				| 6th sheet - bed temp 								| ^				| D3 Ax0d89 C1	
-| 0x0D8A 3466		| uint8		| ^										| 00h 0			| ffh 255				| 6th sheet - PINDA temp 							| ^				| D3 Ax0d8a C1	
-| 0x0D8B 3467		| char		| _7th Sheet block_						| 437573746f6d31| ffffffffffffff		| 7th sheet - Name: 	_Custom1_					| ^				| D3 Ax0d8b C7
-| 0x0D92 3474		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 7th sheet - Z offset 								| ^				| D3 Ax0d92 C2	
-| 0x0D94 3476		| uint8		| ^										| 00h 0			| ffh 255				| 7th sheet - bed temp 								| ^				| D3 Ax0d94 C1	
-| 0x0D95 3477		| uint8		| ^										| 00h 0			| ffh 255				| 7th sheet - PINDA temp 							| ^				| D3 Ax0d95 C1	
-| 0x0D96 3478		| char		| _8th Sheet block_						| 437573746f6d32| ffffffffffffff		| 8th sheet - Name: 	_Custom2_					| ^				| D3 Ax0d96 C7
-| 0x0D9D 3485		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 8th sheet - Z offset 								| ^				| D3 Ax0d9d C2	
-| 0x0D9F 3487		| uint8		| ^										| 00h 0			| ffh 255				| 8th sheet - bed temp 								| ^				| D3 Ax0d9f C1	
-| 0x0DA0 3488		| uint8		| ^										| 00h 0			| ffh 255				| 8th sheet - PINDA temp 							| ^				| D3 Ax0da0 C1	
-| 0x0DA1 3489		| uint8		| ???									| 00h 0			| ffh 255				| ???												| ???			| D3 Ax0da1 C1
-| 0x0D48 3400		| uint8		| EEPROM_FSENSOR_PCB					| ffh 255		| ffh 255				| Filament Sensor type IR unknown					| LCD Support	| D3 Ax0d48 C1
-| ^					| ^			| ^										| 00h 0			| ^						| Filament Sensor type IR 0.3 or older				| ^				| ^
-| ^					| ^			| ^										| 01h 1			| ^						| Filament Sensor type IR 0.4 or newer				| ^				| ^
-| 0x0D47 3399		| uint8		| EEPROM_FSENSOR_ACTION_NA				| 00h 0			| ffh 255				| Filament Sensor action: __Continue__				| LCD menu		| D3 Ax0d47 C1
-| ^					| ^			| ^										| 01h 1			| ^						| Filament Sensor action: __Pause__					| ^				| ^
-| 0x0D37 3383		| float		| EEPROM_UVLO_SAVED_START_POSITION		| ???			| ff ff ff ffh			| Power panic saved start position all-axis			| ???			| D3 Ax0d37 C16
-| ^					| ^			| ^										| ???			| ^						| Power panic saved start position e-axis			| ^				| D3 Ax0d43 C4
-| ^					| ^			| ^										| ???			| ^						| Power panic saved start position z-axis			| ^				| D3 Ax0d3f C4
-| ^					| ^			| ^										| ???			| ^						| Power panic saved start position y-axis			| ^				| D3 Ax0d3b C4
-| ^					| ^			| ^										| ???			| ^						| Power panic saved start position x-axis			| ^				| D3 Ax0d37 C4
-| 0x0D35 3381		| uint16	| EEPROM_UVLO_FEEDMULTIPLY				| ???			| ff ffh 65355			| Power panic saved feed multiplier					| ???			| D3 Ax0d35 C2
-| 0x0D34 3380		| uint8		| EEPROM_BACKLIGHT_LEVEL_HIGH			| 00h - ffh 	| 82h 130				| LCD backlight bright:	__128__	Dim value to 255	| LCD menu		| D3 Ax0d34 C1
-| 0x0D33 3379		| uint8		| EEPROM_BACKLIGHT_LEVEL_LOW			| 00h - ffh		| 32h 50				| LCD backlight dim:	__50__ 	0 to Bright value	| LCD menu		| D3 Ax0d33 C1
-| 0x0D32 3378		| uint8		| EEPROM_BACKLIGHT_MODE					| 02h 2			| ffh 255				| LCD backlight mode: __Auto__						| LCD menu		| D3 Ax0d32 C1
-| ^					| ^			| ^										| 01h 1			| ^						| LCD backlight mode: __Bright__					| ^				| ^
-| ^					| ^			| ^										| 00h 0			| ^						| LCD backlight mode: __Dim__						| ^				| ^
-| 0x0D30 3376		| uint16	| EEPROM_BACKLIGHT_TIMEOUT				| 01 00 - ff ff | 0a 00h 65535			| LCD backlight timeout: __10__ seconds				| LCD menu		| D3 Ax0d30 C2
-| 0x0D2C 3372		| float		| EEPROM_UVLO_LA_K						| ???			| ff ff ff ffh			| Power panic saved Linear Advanced K value			| ???			| D3 Ax0d2c C4
-| 0x0D2B 3371		| uint8		| EEPROM_ALTFAN_OVERRIDE				| ffh 255		| ffh 255				| ALTFAN override unknown state						| LCD menu		| D3 Ax0d2b C1
-| ^					| ^			| ^										| 00h 0			| ^						| ALTFAN override deactivated						| ^				| ^
-| ^					| ^			| ^										| 01h 1			| ^						| ALTFAN override activated 						| ^				| ^
-| 0x0D2A 3370		| uint8		| EEPROM_EXPERIMENTAL_VISIBILITY		| ffh 255		| ffh 255				| Experimental menu visibility unknown state		| LCD menu		| D3 Ax0d2a C1
-| ^					| ^			| ^										| 00h 0			| ^						| Experimental menu visibility hidden				| ^				| ^
-| ^					| ^			| ^										| 01h 1			| ^						| Experimental menu visibility visible				| ^				| ^
-| 0x0D29 3369		| uint8		| EEPROM_PINDA_TEMP_COMPENSATION   		| ffh 255		| ffh 255				| PINDA temp compensation unknown state	            | LCD menu		| D3 Ax0d29 C1
-| ^					| ^			| ^										| 00h 0			| ^						| PINDA has no temp compensation PINDA v1/2    		| ^				| ^
-| ^					| ^			| ^										| 01h 1			| ^						| PINDA has temp compensation aka SuperPINDA       	| ^				| ^
-| 0x0D15 3349		| char[20]	| EEPROM_PRUSA_SN						| SN[19] == 0	| ffffffffffffffff...	| PRUSA Serial number string						| PRUSA SN		| D3 Ax0d15 C20
-| 0x0D11 3345		| float		| EEPROM_UVLO_ACCELL                	| ???			| ff ff ff ffh			| Power panic saved normal acceleration     		| ???			| D3 Ax0d11 C4
-| 0x0D0D 3341		| float		| EEPROM_UVLO_RETRACT_ACCELL			| ???			| ff ff ff ffh			| Power panic saved retract acceleration     		| ???			| D3 Ax0d0d C4
-| 0x0D09 3337		| float		| EEPROM_UVLO_TRAVEL_ACCELL				| ???			| ff ff ff ffh			| Power panic saved travel acceleration     		| ???			| D3 Ax0d09 C4
-| 0x0D05 3333		| uint32_t	| EEPROM_JOB_ID							| ???			| 00 00 00 00h			| Job ID used by host software						| D3 only		| D3 Ax0d05 C4
-| 0x0D04 3332		| uint8_t	| EEPROM_ECOOL_ENABLE					| ffh 255		| ^						| Disable extruder motor scaling for non-farm print	| LCD menu		| D3 Ax0d04 C1
-| ^					| ^			| ^										| 2ah 42		| ^						| Enable extruder motor scaling for non-farm print	| ^				| D3 Ax0d04 C1
-| 0x0D03 3321		| uint8_t	| EEPROM_FW_CRASH_FLAG					| ffh 255   	| ffh 255				| Last FW crash reason (dump_crash_reason)			| D21/D22		| D3 Ax0d03 C1
-| ^					| ^			| ^										| 00h 0			| ^						| manual											| ^				| ^
-| ^					| ^			| ^										| 01h 1			| ^						| stack_error										| ^				| ^
-| ^					| ^			| ^										| 02h 2			| ^						| watchdog											| ^				| ^
-| ^					| ^			| ^										| 03h 3			| ^						| bad_isr											| ^				| ^
-| ^					| ^			| ^										| 04h 4			| ^						| bad_pullup_temp_isr								| ^				| ^
-| ^					| ^			| ^										| 05h 5			| ^						| bad_pullup_step_isr								| ^				| ^

-| Address begin		| Bit/Type 	| Name 									| Valid values	| Default/FactoryReset	| Description 										| Gcode/Function| Debug code
-| :--:				| :--: 		| :--: 									| :--:			| :--:					| :--:												| :--:			| :--:
-| 0x0012 18			| uint16	| EEPROM_FIRMWARE_VERSION_END			| ???			| ff ffh 65535			| ???												| ???			| D3 Ax0012 C2
-| 0x0010 16			| uint16	| EEPROM_FIRMWARE_VERSION_FLAVOR		| ???			| ff ffh 65535			| ???												| ???			| D3 Ax0010 C2
-| 0x000E 14			| uint16	| EEPROM_FIRMWARE_VERSION_REVISION		| ???			| ff ffh 65535			| Firmware version revision number DEV/ALPHA/BETA/RC| ???			| D3 Ax000e C2
-| 0x000C 12			| uint16	| EEPROM_FIRMWARE_VERSION_MINOR			| ???			| ff ffh 65535			| Firmware version minor number						| ???			| D3 Ax000c C2
-| 0x000A 10			| uint16	| EEPROM_FIRMWARE_VERSION_MAJOR			| ???			| ff ffh 65535			| Firmware version major number 					| ???			| D3 Ax000a C2
-| 0x0000 0			| char		| FW_PRUSA3D_MAGIC						| ???			| ffffffffffffffffffff	| __`PRUSA3DFW`__				 					| ???			| D3 Ax0000 C10
+  #### Useful tools/links:
+  To convert hex to ascii       https://www.rapidtables.com/convert/number/hex-to-ascii.html
+
+  To convert hex to dec         https://www.rapidtables.com/convert/number/hex-to-decimal.html
+
+  Version: 1.0.2
+
+  ---------------------------------------------------------------------------------
+
+
+|Address begin|Bit/Type | Name                                  | Valid values | Default/FactoryReset  | Description                                       |Gcode/Function| Debug code
+| :--         | :--     | :--                                   | :--:         | :--:                  | :--                                               | :--:         | :--:
+| 0x0FFF 4095 | uchar   | EEPROM_SILENT                         | 00h 0        | ffh 255               | TMC Stealth mode: __off__ / miniRambo Power mode  | LCD menu     | D3 Ax0fff C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | TMC Stealth mode: __on__ / miniRambo Silent mode  | ^            | ^
+| ^           | ^       | ^                                     | 02h 2        | ^                     | miniRambo Auto mode                               | ^            | ^
+| 0x0FFE 4094 | uchar   | EEPROM_LANG                           | 00h 0        | ffh 255         __L__ | English / LANG_ID_PRI                             | LCD menu     | D3 Ax0ffe C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | Other language LANG_ID_SEC                        | ^            | ^
+| 0x0FFC 4092 | uint16  | EEPROM_BABYSTEP_X                     | ???          | ff ffh 65535          | Babystep for X axis _unsued_                      | ???          | D3 Ax0ffc C2
+| 0x0FFA 4090 | uint16  | EEPROM_BABYSTEP_Y                     | ???          | ff ffh 65535          | Babystep for Y axis _unsued_                      | ^            | D3 Ax0ffa C2
+| 0x0FF8 4088 | uint16  | EEPROM_BABYSTEP_Z                     | ???          | ff ffh 65535          | Babystep for Z axis _lagacy_                      | ^            | D3 Ax0ff8 C2
+| ^           | ^       | ^                                     | ^            | ^                     | multiple values stored now in EEPROM_Sheets_base  | ^            | ^
+| 0x0FF7 4087 | uint8   | EEPROM_CALIBRATION_STATUS             | ffh 255      | ffh 255               | Assembled _default_                               | ???          | D3 Ax0ff7 C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | Calibrated                                        | ^            | ^
+| ^           | ^       | ^                                     | e6h 230      | ^                     | needs Live Z adjustment                           | ^            | ^
+| ^           | ^       | ^                                     | f0h 240      | ^               __P__ | needs Z calibration                               | ^            | ^
+| ^           | ^       | ^                                     | fah 250      | ^                     | needs XYZ calibration                             | ^            | ^
+| ^           | ^       | ^                                     | 00h 0        | ^                     | Unknown                                           | ^            | ^
+| 0x0FF5 4085 | uint16  | EEPROM_BABYSTEP_Z0                    | ???          | ff ffh 65535          | Babystep for Z ???                                | ???          | D3 Ax0ff5 C2
+| 0x0FF1 4081 | unint32 | EEPROM_FILAMENTUSED                   | ???          | 00 00 00 00h 0 __S/P__| Filament used in meters                           | ???          | D3 Ax0ff1 C4
+| 0x0FED 4077 | unint32 | EEPROM_TOTALTIME                      | ???          | 00 00 00 00h 0 __S/P__| Total print time                                  | ???          | D3 Ax0fed C4
+| 0x0FE5 4069 | float   | EEPROM_BED_CALIBRATION_CENTER         | ???          | ff ff ff ffh          | ???                                               | ???          | D3 Ax0fe5 C8
+| 0x0FDD 4061 | float   | EEPROM_BED_CALIBRATION_VEC_X          | ???          | ff ff ff ffh          | ???                                               | ???          | D3 Ax0fdd C8
+| 0x0FD5 4053 | float   | EEPROM_BED_CALIBRATION_VEC_Y          | ???          | ff ff ff ffh          | ???                                               | ???          | D3 Ax0fd5 C8
+| 0x0FC5 4037 | int16   | EEPROM_BED_CALIBRATION_Z_JITTER       | ???          | ff ffh 65535          | ???                                               | ???          | D3 Ax0fc5 C16
+| 0x0FC4 4036 | bool    | EEPROM_FARM_MODE                      | 00h 0        | ffh 255         __P__ | Prusa farm mode: __off__                          | G99          | D3 Ax0fc4 C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | Prusa farm mode: __on__                           | G98          | ^
+| 0x0FC3 4035 | free    | _EEPROM_FREE_NR1_                     | ???          | ffh 255               | _Free EEPROM space_                               | _free space_ | D3 Ax0fc3 C1
+| 0x0FC1 4033 | ???     | EEPROM_FARM_NUMBER                    | 000-999      | ff ffh / 000    __P__ | Prusa farm number _only 0-9 are allowed: 000-999_ | LCD menu     | D3 Ax0fc1 C2
+| 0x0FC0 4032 | bool    | EEPROM_BED_CORRECTION_VALID           | 00h 0        | 00h 0                 | Bed correction invalid                            | ???          | D3 Ax0fc0 C1
+| ^           | ^       | ^                                     | ffh 255      | ^                     | Bed correction valid                              | ???          | ^
+| 0x0FBF 4031 | char    | EEPROM_BED_CORRECTION_LEFT            | 00h ffh      | 00h 0                 | Bed manual correction left                        | LCD menu     | D3 Ax0fbf C1
+| ^           | ^       | ^                                     | ^            | ^                     | At this moment limited to +-100um                 | G80 Lxxx     | ^
+| 0x0FBE 4030 | char    | EEPROM_BED_CORRECTION_RIGHT           | 00h ffh      | 00h 0                 | Bed manual correction right                       | LCD menu     | D3 Ax0fbe C1
+| ^           | ^       | ^                                     | ^            | ^                     | At this moment limited to +-100um                 | G80 Rxxx     | ^
+| 0x0FBD 4029 | char    | EEPROM_BED_CORRECTION_FRONT           | 00h ffh      | 00h 0                 | Bed manual correction front                       | LCD menu     | D3 Ax0fbd C1
+| ^           | ^       | ^                                     | ^            | ^                     | At this moment limited to +-100um                 | G80 Fxxx     | ^
+| 0x0FBC 4028 | char    | EEPROM_BED_CORRECTION_BACK            | 00h ffh      | 00h 0                 | Bed manual correction back                        | LCD menu     | D3 Ax0fbc C1
+| ^           | ^       | ^                                     | ^            | ^                     | At this moment limited to +-100um                 | G80 Bxxx     | ^
+| 0x0FBB 4027 | bool    | EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY | 00h 0        | ffh 255               | Toshiba Air: __off__                              | LCD menu     | D3 Ax0fbb C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | Toshiba Air: __on__                               | ^            | ^
+| 0x0FBA 4026 | uchar   | EEPROM_PRINT_FLAG                     | ???          | ???                   | _unsued_                                          | ???          | D3 Ax0fba C1
+| 0x0FB0 4016 | int16   | EEPROM_PROBE_TEMP_SHIFT               | ???          | ???                   | ???                                               | ???          | D3 Ax0fb0 C10
+| 0x0FAF 4015 | bool    | EEPROM_TEMP_CAL_ACTIVE                | 00h 0        | 00h 0                 | PINDA Temp cal.: __inactive__                     | LCD menu     | D3 Ax0faf C1
+| ^           | ^       | ^                                     | ffh 255      | ^                     | PINDA Temp cal.: __active__                       | ^            | ^
+| 0x0FA7 4007 | ???     | _EEPROM_FREE_NR6_                     | ???          | ffh 255               | _Free EEPROM space_                               | ???          | D3 Ax0fae C8
+| ^           | ^       | ^                                     | ^            | 00 00 00 00h          | ^                                                 | ^            | ^
+| 0x0FA6 4006 | uint8   | EEPROM_CALIBRATION_STATUS_PINDA       | 00h 0        | ffh 255               | PINDA Temp: __not calibrated__                    | ???          | D3 Ax0fa6 C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | PINDA Temp: __calibrated__                        | ^            | ^
+| 0x0FA5 4005 | uint8   | EEPROM_UVLO                           | 00h 0        | ffh 255               | Power Panic flag: __inactive__                    | ???          | D3 Ax0fa5 C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | Power Panic flag: __active__                      | ^            | ^
+| ^           | ^       | ^                                     | 02h 2        | ^                     | Power Panic flag: __???__                         | ^            | ^
+| 0x0F9D 3997 | float   | EEPROM_UVLO_CURRENT_POSITION          | ???          | ffh 255               | Power Panic position                              | ???          | D3 Ax0f9d C8
+| 0x0F95 3989 | char    | EEPROM_FILENAME                       | ???          | ffh 255               | Power Panic Filename                              | ???          | D3 Ax0f95 C8
+| 0x0F91 3985 | unint32 | EEPROM_FILE_POSITION                  | ???          | ff ff ff ffh          | Power Panic File Position                         | ???          | D3 Ax0f91 C4
+| 0x0F8D 3981 | float   | EEPROM_UVLO_CURRENT_POSITION_Z        | ???          | ff ff ff ffh          | Power Panic Z Position                            | ^            | D3 Ax0f8d C4
+| 0x0F8C 3980 | ???     | EEPROM_UVLO_UNUSED_001                | ???          | ffh 255               | Power Panic _unused_                              | ^            | D3 Ax0f8c C1
+| 0x0F8B 3979 | uint8   | EEPROM_UVLO_TARGET_BED                | ???          | ffh 255               | Power Panic Bed temperature                       | ^            | D3 Ax0f8b C1
+| 0x0F89 3977 | uint16  | EEPROM_UVLO_FEEDRATE                  | ???          | ff ffh 65535          | Power Panic Feedrate                              | ^            | D3 Ax0f89 C2
+| 0x0F88 3976 | uint8   | EEPROM_UVLO_FAN_SPEED                 | ???          | ffh 255               | Power Panic Fan speed                             | ^            | D3 Ax0f88 C1
+| 0x0F87 3975 | uint8   | EEPROM_FAN_CHECK_ENABLED              | 00h 0        | ???                   | Fan Check __disabled__                            | LCD menu     | D3 Ax0f87 C1
+| ^           | ^       | ^                                     | 01h 1        | ffh 255               | Fan Check __enabled__                             | ^            | ^
+| 0x0F75 3957 | uint16  | EEPROM_UVLO_MESH_BED_LEVELING         | ???          | ff ffh 65535          | Power Panic Mesh Bed Leveling                     | ???          | D3 Ax0f75 C18
+| 0x0F73 3955 | uint16  | EEPROM_UVLO_Z_MICROSTEPS              | ???          | ff ffh 65535          | Power Panic Z microsteps                          | ???          | D3 Ax0f73 C2
+| 0x0F72 3954 | uint8   | EEPROM_UVLO_E_ABS                     | ???          | ffh 255               | Power Panic ??? position                          | ???          | D3 Ax0f72 C1
+| 0x0F6E 3950 | float   | EEPROM_UVLO_CURRENT_POSITION_E        | ???          | ff ff ff ffh          | Power Panic E position                            | ???          | D3 Ax0f6e C4
+| 0x0F6C 3948 | uint16  | EEPROM_UVLO_SAVED_SEGMENT_IDX         | all          | ff ffh 65535          | Power Panic index of multi-segment move           | ???          | D3 Ax0f6c C2
+| 0x0F6B 3947 | ???     | _EEPROM_FREE_NR4_                     | ???          | ffh 255               | _Free EEPROM space_                               | _free space_ | D3 Ax0f6b C1
+| 0x0F6A 3946 | ???     | _EEPROM_FREE_NR5_                     | ???          | ffh 255               | _Free EEPROM space_                               | _free space_ | D3 Ax0f6a C1
+| 0x0F69 3945 | uint8   | EEPROM_CRASH_DET                      | ffh 255      | ffh 255               | Crash detection: __enabled__                      | LCD menu     | D3 Ax0f69 C1
+| ^           | ^       | ^                                     | 00h 0        | ^                     | Crash detection: __disabled__                     | LCD menu     | ^
+| 0x0F68 3944 | uint8   | EEPROM_CRASH_COUNT_Y                  | 00h-ffh 0-255| ffh 255       __S/P__ | Crashes detected on y axis                        | ???          | D3 Ax0f68 C1
+| 0x0F67 3943 | uint8   | EEPROM_FSENSOR                        | 01h 1        | ffh 255         __P__ | Filament sensor: __enabled__                      | LCD menu     | D3 Ax0f67 C1
+| ^           | ^       | ^                                     | 00h 0        | ^                     | Filament sensor: __disabled__                     | LCD menu     | ^
+| 0x0F65 3942 | uint8   | EEPROM_CRASH_COUNT_X                  | 00h-ffh 0-255| ffh 255       __S/P__ | Crashes detected on x axis                        | ???          | D3 Ax0f66 C1
+| 0x0F65 3941 | uint8   | EEPROM_FERROR_COUNT                   | 00h-ffh 0-255| ffh 255       __S/P__ | Filament sensor error counter                     | ???          | D3 Ax0f65 C1
+| 0x0F64 3940 | uint8   | EEPROM_POWER_COUNT                    | 00h-ffh 0-255| ffh 255       __S/P__ | Power failure counter                             | ???          | D3 Ax0f64 C1
+| 0x0F60 3936 | float   | EEPROM_XYZ_CAL_SKEW                   | ???          | ff ff ff ffh          | XYZ skew value                                    | ???          | D3 Ax0f60 C4
+| 0x0F5F 3935 | uint8   | EEPROM_WIZARD_ACTIVE                  | 01h 1        | 01h 1           __P__ | Wizard __active__                                 | ???          | D3 Ax0f5f C1
+| ^           | ^       | ^                                     | 00h 0        | ^                     | Wizard __inactive__                               | ^            | ^
+| ^           | ^       | ^                                     | 02h 2        | 02h 2           __M__ | Wizard active - Z cal after shipping/service prep | ^            | ^
+| 0x0F5D 3933 | uint16  | EEPROM_BELTSTATUS_X                   | ???          | ff ffh                | X Beltstatus                                      | ???          | D3 Ax0f5d C2
+| 0x0F5B 3931 | uint16  | EEPROM_BELTSTATUS_Y                   | ???          | ff ffh                | Y Beltstatus                                      | ???          | D3 Ax0f5b C2
+| 0x0F5A 3930 | uint8   | EEPROM_DIR_DEPTH                      | 00h-ffh 0-255| ffh 255               | Directory depth                                   | ???          | D3 Ax0f5a C1
+| 0x0F0A 3850 | uint8   | EEPROM_DIRS                           | ???          | ffh 255               | Directories ???                                   | ???          | D3 Ax0f0a C80
+| 0x0F09 3849 | uint8   | EEPROM_SD_SORT                        | 00h 0        | ffh 255               | SD card sort by:     __time__                     | LCD menu     | D3 Ax0f09 C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | SD card sort by:     __alphabet__                 | LCD menu     | ^
+| ^           | ^       | ^                                     | 02h 2        | ^                     | SD card:            __not sorted__                | LCD menu     | ^
+| 0x0F08 3848 | uint8   | EEPROM_SECOND_SERIAL_ACTIVE           | 00h 0        | ffh 255               | RPi Port: __disabled__                            | LCD menu     | D3 Ax0f08 C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | RPi Port: __enabled__                             | LCD menu     | ^
+| 0x0F07 3847 | uint8   | EEPROM_FSENS_AUTOLOAD_ENABLED         | 01h 1        | ffh 255         __P__ | Filament autoload: __enabled__                    | LCD menu     | D3 Ax0f07 C1
+| ^           | ^       | ^                                     | 00h 0        | ^                     | Filament autoload: __disabled__                   | LCD menu     | ^
+| 0x0F05 3845 | uint16  | EEPROM_CRASH_COUNT_X_TOT              | 0000-fffe    | ff ffh        __S/P__ | Total crashes on x axis                           | ???          | D3 Ax0f05 C2
+| 0x0F03 3843 | uint16  | EEPROM_CRASH_COUNT_Y_TOT              | 0000-fffe    | ff ffh        __S/P__ | Total crashes on y axis                           | ???          | D3 Ax0f03 C2
+| 0x0F01 3841 | uint16  | EEPROM_FERROR_COUNT_TOT               | 0000-fffe    | ff ffh        __S/P__ | Total filament sensor errors                      | ???          | D3 Ax0f01 C2
+| 0x0EFF 3839 | uint16  | EEPROM_POWER_COUNT_TOT                | 0000-fffe    | ff ffh        __S/P__ | Total power failures                              | ???          | D3 Ax0eff C2
+| 0x0EFE 3838 | uint8   | EEPROM_TMC2130_HOME_X_ORIGIN          | ???          | ffh 255               | ???                                               | ???          | D3 Ax0efe C1
+| 0x0EFD 3837 | uint8   | EEPROM_TMC2130_HOME_X_BSTEPS          | ???          | ffh 255               | ???                                               | ???          | D3 Ax0efd C1
+| 0x0EFC 3836 | uint8   | EEPROM_TMC2130_HOME_X_FSTEPS          | ???          | ffh 255               | ???                                               | ???          | D3 Ax0efc C1
+| 0x0EFB 3835 | uint8   | EEPROM_TMC2130_HOME_Y_ORIGIN          | ???          | ffh 255               | ???                                               | ???          | D3 Ax0efb C1
+| 0x0EFA 3834 | uint8   | EEPROM_TMC2130_HOME_Y_BSTEPS          | ???          | ffh 255               | ???                                               | ???          | D3 Ax0efa C1
+| 0x0EF9 3833 | uint8   | EEPROM_TMC2130_HOME_Y_FSTEPS          | ???          | ffh 255               | ???                                               | ???          | D3 Ax0ef9 C1
+| 0x0EF8 3832 | uint8   | EEPROM_TMC2130_HOME_ENABLED           | ???          | ffh 255               | ???                                               | ???          | D3 Ax0ef8 C1
+| 0x0EF7 3831 | uint8   | EEPROM_TMC2130_WAVE_X_FAC             | ???          | ffh 255               | ???                                               | ???          | D3 Ax0ef7 C1
+| 0x0EF6 3830 | uint8   | EEPROM_TMC2130_WAVE_Y_FAC             | ???          | ffh 255               | ???                                               | ???          | D3 Ax0ef6 C1
+| 0x0EF5 3829 | uint8   | EEPROM_TMC2130_WAVE_Z_FAC             | ???          | ffh 255               | ???                                               | ???          | D3 Ax0ef5 C1
+| 0x0EF4 3828 | uint8   | EEPROM_TMC2130_WAVE_E_FAC             | ???          | ffh 255               | ???                                               | ???          | D3 Ax0ef4 C1
+| 0x0EF3 3827 | uint8   | EEPROM_TMC2130_X_MRES                 | ???          | ffh 255               | ???                                               | ???          | D3 Ax0ef3 C1
+| 0x0EF2 3826 | uint8   | EEPROM_TMC2130_Y_MRES                 | ???          | ffh 255               | ???                                               | ???          | D3 Ax0ef2 C1
+| 0x0EF1 3825 | uint8   | EEPROM_TMC2130_Z_MRES                 | ???          | ffh 255               | ???                                               | ???          | D3 Ax0ef1 C1
+| 0x0EF0 3824 | uint8   | EEPROM_TMC2130_E_MRES                 | ???          | ffh 255               | ???                                               | ???          | D3 Ax0ef0 C1
+| 0x0EEE 3822 | uint16  | EEPROM_PRINTER_TYPE                   | ???          | ff ffh 65535          | Printer Type                                      | ???          | D3 Ax0eee C2
+| ^           | ^       | ^                                     | 64 00h 100   | ^                     | PRINTER_MK1                                       | ???          | ^
+| ^           | ^       | ^                                     | c8 00h 200   | ^                     | PRINTER_MK2                                       | ???          | ^
+| ^           | ^       | ^                                     | c9 00h 201   | ^                     | PRINTER_MK2 with MMU1                             | ???          | ^
+| ^           | ^       | ^                                     | ca 00h 202   | ^                     | PRINTER_MK2S                                      | ???          | ^
+| ^           | ^       | ^                                     | cb 00h 203   | ^                     | PRINTER_MK2S with MMU1                            | ???          | ^
+| ^           | ^       | ^                                     | fa 00h 250   | ^                     | PRINTER_MK2.5                                     | ???          | ^
+| ^           | ^       | ^                                     | 1a 4fh 20250 | ^                     | PRINTER_MK2.5 with MMU2                           | ???          | ^
+| ^           | ^       | ^                                     | fc 00h 252   | ^                     | PRINTER_MK2.5S                                    | ???          | ^
+| ^           | ^       | ^                                     | 1c 4fh 20252 | ^                     | PRINTER_MK2.5S with MMU2S                         | ???          | ^
+| ^           | ^       | ^                                     | 2c 01h 300   | ^                     | PRINTER_MK3                                       | ???          | ^
+| ^           | ^       | ^                                     | 4c 4fh 20300 | ^                     | PRINTER_MK3 with MMU2                             | ???          | ^
+| ^           | ^       | ^                                     | 2e 01h 302   | ^                     | PRINTER_MK3S                                      | ???          | ^
+| ^           | ^       | ^                                     | 4e 4fh 20302 | ^                     | PRINTER_MK3S with MMU2S                           | ???          | ^
+| 0x0EEC 3820 | uint16  | EEPROM_BOARD_TYPE                     | ???          | ff ffh 65535          | Board Type                                        | ???          | D3 Ax0eec C2
+| ^           | ^       | ^                                     | c8 00h 200   | ^                     | BOARD_RAMBO_MINI_1_0                              | ???          | ^
+| ^           | ^       | ^                                     | cb 00h 203   | ^                     | BOARD_RAMBO_MINI_1_3                              | ???          | ^
+| ^           | ^       | ^                                     | 36 01h 310   | ^                     | BOARD_EINSY_1_0a                                  | ???          | ^
+| 0x0EE8 3816 | float   | EEPROM_EXTRUDER_MULTIPLIER_0          | ???          | ff ff ff ffh          | Power panic Extruder 0 multiplier                 | ???          | D3 Ax0ee8 C4
+| 0x0EE4 3812 | float   | EEPROM_EXTRUDER_MULTIPLIER_1          | ???          | ff ff ff ffh          | Power panic Extruder 1 multiplier                 | ???          | D3 Ax0ee4 C4
+| 0x0EE0 3808 | float   | EEPROM_EXTRUDER_MULTIPLIER_2          | ???          | ff ff ff ffh          | Power panic Extruder 2 multiplier                 | ???          | D3 Ax0ee0 C4
+| 0x0EDE 3806 | uint16  | EEPROM_EXTRUDEMULTIPLY                | ???          | ff ffh 65535          | Power panic Extruder multiplier                   | ???          | D3 Ax0ede C2
+| 0x0EDA 3802 | float   | EEPROM_UVLO_TINY_CURRENT_POSITION_Z   | ???          | ff ff ff ffh          | Power panic Z position                            | ???          | D3 Ax0eda C4
+| 0x0ED8 3800 | uint16  | EEPROM_UVLO_TARGET_HOTEND             | ???          | ff ffh 65535          | Power panic target Hotend temperature             | ???          | D3 Ax0ed8 C2
+| 0x0ED7 3799 | uint8   | EEPROM_SOUND_MODE                     | 00h 0        | ffh 255               | Sound mode: __loud__                              | ???          | D3 Ax0ed7 C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | Sound mode: __once__                              | ^            | ^
+| ^           | ^       | ^                                     | 02h 2        | ^                     | Sound mode: __silent__                            | ^            | ^
+| ^           | ^       | ^                                     | 03h 3        | ^                     | Sound mode: __assist__                            | ^            | ^
+| 0x0ED6 3798 | bool    | EEPROM_SPOOL_JOIN                     | 01h 1        | ffh 255               | MMU2/s autodeplete: __on__                        | ???          | D3 Ax0ed6 C1
+| ^           | ^       | ^                                     | 00h 0        | ^                     | MMU2/s autodeplete: __off__                       | ^            | ^
+| 0x0ED5 3797 | bool    | EEPROM_FSENS_RUNOUT_ENABLED           | 01h 1        | ffh 255         __P__ | Filament runout: __enabled__                      | LCD menu     | D3 Ax0ed5 C1
+| ^           | ^       | ^                                     | 00h 0        | ^                     | Filament runout: __disabled__                     | LCD menu     | ^
+| 0x0ED3 3795 | uint16  | EEPROM_MMU_FAIL_TOT                   | ???          | ff ffh 65535  __S/P__ | MMU2/s total failures                             | ???          | D3 Ax0ed3 C2
+| 0x0ED2 3794 | uint8   | EEPROM_MMU_FAIL                       | ???          | ffh 255       __S/P__ | MMU2/s fails during print                         | ???          | D3 Ax0ed2 C1
+| 0x0ED0 3792 | uint16  | EEPROM_MMU_LOAD_FAIL_TOT              | ???          | ff ffh 65535  __S/P__ | MMU2/s total load failures                        | ???          | D3 Ax0ed0 C2
+| 0x0ECF 3791 | uint8   | EEPROM_MMU_LOAD_FAIL                  | ???          | ffh 255       __S/P__ | MMU2/s load failures during print                 | ???          | D3 Ax0ecf C1
+| 0x0ECE 3790 | uint8   | EEPROM_MMU_CUTTER_ENABLED             | 00h 0        | ffh 255               | MMU2/s cutter: __disabled__                       | LCD menu     | D3 Ax0ece C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | MMU2/s cutter: __enabled__                        | ^            | ^
+| ^           | ^       | ^                                     | 02h 2        | ^                     | MMU2/s cutter: __always__                         | ^            | ^
+| 0x0DAE 3502 | uint16  | EEPROM_UVLO_MESH_BED_LEVELING_FULL    | ???          | ff ffh 65535          | Power panic Mesh bed leveling points              | ???          | D3 Ax0dae C288
+| 0x0DAD 3501 | uint8   | EEPROM_MBL_TYPE                       | ???          | ffh 255               | Mesh bed leveling precision _unused atm_          | ???          | D3 Ax0dad C1
+| 0x0DAC 3500 | bool    | EEPROM_MBL_MAGNET_ELIMINATION         | 01h 1        | ffh 255               | Mesh bed leveling does: __ignores__ magnets       | LCD menu     | D3 Ax0dac C1
+| ^           | ^       | ^                                     | 00h 0        | ^                     | Mesh bed leveling does: __NOT ignores__ magnets   | ^            | ^
+| 0x0DAB 3499 | uint8   | EEPROM_MBL_POINTS_NR                  | 03h 3        | ffh 255               | Mesh bed leveling points: __3x3__                 | LCD menu     | D3 Ax0dab C1
+| ^           | ^       | ^                                     | 07h 7        | ^                     | Mesh bed leveling points: __7x7__                 | ^            | ^
+| 0x0DAA 3498 | uint8   | EEPROM_MBL_PROBE_NR                   | 03h 3        | ffh 255               | MBL times measurements for each point: __3__      | LCD menu     | D3 Ax0daa C1
+| ^           | ^       | ^                                     | 05h 5        | ^                     | MBL times measurements for each point: __5__      | ^            | ^
+| ^           | ^       | ^                                     | 01h 1        | ^                     | MBL times measurements for each point: __1__      | ^            | ^
+| 0x0DA9 3497 | uint8   | EEPROM_MMU_STEALTH                    | 01h 1        | ffh 255               | MMU2/s Silent mode: __on__                        | ???          | D3 Ax0da9 C1
+| ^           | ^       | ^                                     | 00h 0        | ^                     | MMU2/s Silent mode: __off__                       | ^            | ^
+| 0x0DA8 3496 | uint8   | EEPROM_CHECK_MODE                     | 01h 1        | ffh 255               | Check mode for nozzle is: __warn__                | LCD menu     | D3 Ax0da8 C1
+| ^           | ^       | ^                                     | 02h 2        | ^                     | Check mode for nozzle is: __strict__              | ^            | ^
+| ^           | ^       | ^                                     | 00h 0        | ^                     | Check mode for nozzle is: __none__                | ^            | ^
+| 0x0DA7 3495 | uint8   | EEPROM_NOZZLE_DIAMETER                | 28h 40       | ffh 255               | Nozzle diameter is: __40 or 0.40mm__              | LCD menu     | D3 Ax0da7 C1
+| ^           | ^       | ^                                     | 3ch 60       | ^                     | Nozzle diameter is: __60 or 0.60mm__              | ^            | ^
+| ^           | ^       | ^                                     | 3ch 80       | ^                     | Nozzle diameter is: __80 or 0.80mm__              | ^            | ^
+| ^           | ^       | ^                                     | 19h 25       | ^                     | Nozzle diameter is: __25 or 0.25mm__              | ^            | ^
+| 0x0DA5 3493 | uint16  | EEPROM_NOZZLE_DIAMETER_uM             | 9001h        | ff ffh 65535          | Nozzle diameter is: __400um__                     | LCD menu     | D3 Ax0da5 C2
+| ^           | ^       | ^                                     | 5802h        | ^                     | Nozzle diameter is: __600um__                     | ^            | ^
+| ^           | ^       | ^                                     | 2003h        | ^                     | Nozzle diameter is: __800um__                     | ^            | ^
+| ^           | ^       | ^                                     | fa00h        | ^                     | Nozzle diameter is: __250um__                     | ^            | ^
+| 0x0DA4 3492 | uint8   | EEPROM_CHECK_MODEL                    | 01h 1        | ffh 255               | Check mode for printer model is: __warn__         | LCD menu     | D3 Ax0da4 C1
+| ^           | ^       | ^                                     | 02h 2        | ^                     | Check mode for printer model is: __strict__       | ^            | ^
+| ^           | ^       | ^                                     | 00h 0        | ^                     | Check mode for printer model is: __none__         | ^            | ^
+| 0x0DA3 3491 | uint8   | EEPROM_CHECK_VERSION                  | 01h 1        | ffh 255               | Check mode for firmware is: __warn__              | LCD menu     | D3 Ax0da3 C1
+| ^           | ^       | ^                                     | 02h 2        | ^                     | Check mode for firmware is: __strict__            | ^            | ^
+| ^           | ^       | ^                                     | 00h 0        | ^                     | Check mode for firmware is: __none__              | ^            | ^
+| 0x0DA2 3490 | uint8   | EEPROM_CHECK_GCODE                    | 01h 1        | ffh 255               | Check mode for gcode is: __warn__ _unused atm_    | LCD menu     | D3 Ax0da2 C1
+| ^           | ^       | ^                                     | 02h 2        | ^                     | Check mode for gcode is: __strict__ _unused atm_  | ^            | ^
+| ^           | ^       | ^                                     | 00h 0        | ^                     | Check mode for gcode is: __none__ _unused atm_    | ^            | ^
+| 0x0D49 3401 | uint16  | EEPROM_SHEETS_BASE                    | ???          | ffh 255               | ???                                               | LCD menu     | D3 Ax0d49 C89
+| 0x0D49 3401 | char    | _1st Sheet block_                     |536d6f6f746831| ffffffffffffff        | 1st sheet - Name: _Smooth1_                       | ^            | D3 Ax0d49 C7
+| 0x0D50 3408 | uint16  | ^                                     | 00 00h 0     | ff ffh 65535          | 1st sheet - Z offset                              | ^            | D3 Ax0d50 C2
+| 0x0D52 3410 | uint8   | ^                                     | 00h 0        | ffh 255               | 1st sheet - bed temp                              | ^            | D3 Ax0d52 C1
+| 0x0D53 3411 | uint8   | ^                                     | 00h 0        | ffh 255               | 1st sheet - PINDA temp                            | ^            | D3 Ax0d53 C1
+| 0x0D54 3412 | char    | _2nd Sheet block_                     |536d6f6f746832| ffffffffffffff        | 2nd sheet - Name: _Smooth2_                       | ^            | D3 Ax0d54 C7
+| 0x0D5B 3419 | uint16  | ^                                     | 00 00h 0     | ff ffh 65535          | 2nd sheet - Z offset                              | ^            | D3 Ax0d5b C2
+| 0x0D5D 3421 | uint8   | ^                                     | 00h 0        | ffh 255               | 2nd sheet - bed temp                              | ^            | D3 Ax0d5d C1
+| 0x0D5E 3422 | uint8   | ^                                     | 00h 0        | ffh 255               | 2nd sheet - PINDA temp                            | ^            | D3 Ax0d5e C1
+| 0x0D5F 3423 | char    | _3rd Sheet block_                     |54657874757231| ffffffffffffff        | 3rd sheet - Name: _Textur1_                       | ^            | D3 Ax0d5f C7
+| 0x0D66 3430 | uint16  | ^                                     | 00 00h 0     | ff ffh 65535          | 3rd sheet - Z offset                              | ^            | D3 Ax0d66 C2
+| 0x0D68 3432 | uint8   | ^                                     | 00h 0        | ffh 255               | 3rd sheet - bed temp                              | ^            | D3 Ax0d68 C1
+| 0x0D69 3433 | uint8   | ^                                     | 00h 0        | ffh 255               | 3rd sheet - PINDA temp                            | ^            | D3 Ax0d69 C1
+| 0x0D6A 3434 | char    | _4th Sheet block_                     |54657874757232| ffffffffffffff        | 4th sheet - Name: _Textur2_                       | ^            | D3 Ax0d6a C7
+| 0x0D71 3441 | uint16  | ^                                     | 00 00h 0     | ff ffh 65535          | 4th sheet - Z offset                              | ^            | D3 Ax0d71 C2
+| 0x0D73 3443 | uint8   | ^                                     | 00h 0        | ffh 255               | 4th sheet - bed temp                              | ^            | D3 Ax0d73 C1
+| 0x0D74 3444 | uint8   | ^                                     | 00h 0        | ffh 255               | 4th sheet - PINDA temp                            | ^            | D3 Ax0d74 C1
+| 0x0D75 3445 | char    | _5th Sheet block_                     |536174696e2020| ffffffffffffff        | 5th sheet - Name: _Satin  _                       | ^            | D3 Ax0d75 C7
+| 0x0D7C 3452 | uint16  | ^                                     | 00 00h 0     | ff ffh 65535          | 5th sheet - Z offset                              | ^            | D3 Ax0d7c C2
+| 0x0D7E 3454 | uint8   | ^                                     | 00h 0        | ffh 255               | 5th sheet - bed temp                              | ^            | D3 Ax0d7e C1
+| 0x0D7F 3455 | uint8   | ^                                     | 00h 0        | ffh 255               | 5th sheet - PINDA temp                            | ^            | D3 Ax0d7f C1
+| 0x0D80 3456 | char    | _6th Sheet block_                     |4e796c6f6e5041| ffffffffffffff        | 6th sheet - Name: _NylonPA_                       | ^            | D3 Ax0d80 C7
+| 0x0D87 3463 | uint16  | ^                                     | 00 00h 0     | ff ffh 65535          | 6th sheet - Z offset                              | ^            | D3 Ax0d87 C2
+| 0x0D89 3465 | uint8   | ^                                     | 00h 0        | ffh 255               | 6th sheet - bed temp                              | ^            | D3 Ax0d89 C1
+| 0x0D8A 3466 | uint8   | ^                                     | 00h 0        | ffh 255               | 6th sheet - PINDA temp                            | ^            | D3 Ax0d8a C1
+| 0x0D8B 3467 | char    | _7th Sheet block_                     |437573746f6d31| ffffffffffffff        | 7th sheet - Name: _Custom1_                       | ^            | D3 Ax0d8b C7
+| 0x0D92 3474 | uint16  | ^                                     | 00 00h 0     | ff ffh 65535          | 7th sheet - Z offset                              | ^            | D3 Ax0d92 C2
+| 0x0D94 3476 | uint8   | ^                                     | 00h 0        | ffh 255               | 7th sheet - bed temp                              | ^            | D3 Ax0d94 C1
+| 0x0D95 3477 | uint8   | ^                                     | 00h 0        | ffh 255               | 7th sheet - PINDA temp                            | ^            | D3 Ax0d95 C1
+| 0x0D96 3478 | char    | _8th Sheet block_                     |437573746f6d32| ffffffffffffff        | 8th sheet - Name: _Custom2_                       | ^            | D3 Ax0d96 C7
+| 0x0D9D 3485 | uint16  | ^                                     | 00 00h 0     | ff ffh 65535          | 8th sheet - Z offset                              | ^            | D3 Ax0d9d C2
+| 0x0D9F 3487 | uint8   | ^                                     | 00h 0        | ffh 255               | 8th sheet - bed temp                              | ^            | D3 Ax0d9f C1
+| 0x0DA0 3488 | uint8   | ^                                     | 00h 0        | ffh 255               | 8th sheet - PINDA temp                            | ^            | D3 Ax0da0 C1
+| 0x0DA1 3489 | uint8   | ???                                   | 00h 0        | ffh 255               | ???                                               | ???          | D3 Ax0da1 C1
+| 0x0D48 3400 | uint8   | EEPROM_FSENSOR_PCB                    | ffh 255      | ffh 255               | Filament Sensor type IR unknown                   | LCD Support  | D3 Ax0d48 C1
+| ^           | ^       | ^                                     | 00h 0        | ^                     | Filament Sensor type IR 0.3 or older              | ^            | ^
+| ^           | ^       | ^                                     | 01h 1        | ^                     | Filament Sensor type IR 0.4 or newer              | ^            | ^
+| 0x0D47 3399 | uint8   | EEPROM_FSENSOR_ACTION_NA              | 00h 0        | ffh 255               | Filament Sensor action: __Continue__              | LCD menu     | D3 Ax0d47 C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | Filament Sensor action: __Pause__                 | ^            | ^
+| 0x0D37 3383 | float   | EEPROM_UVLO_SAVED_START_POSITION      | ???          | ff ff ff ffh          | Power panic saved start position all-axis         | ???          | D3 Ax0d37 C16
+| ^           | ^       | ^                                     | ???          | ^                     | Power panic saved start position e-axis           | ^            | D3 Ax0d43 C4
+| ^           | ^       | ^                                     | ???          | ^                     | Power panic saved start position z-axis           | ^            | D3 Ax0d3f C4
+| ^           | ^       | ^                                     | ???          | ^                     | Power panic saved start position y-axis           | ^            | D3 Ax0d3b C4
+| ^           | ^       | ^                                     | ???          | ^                     | Power panic saved start position x-axis           | ^            | D3 Ax0d37 C4
+| 0x0D35 3381 | uint16  | EEPROM_UVLO_FEEDMULTIPLY              | ???          | ff ffh 65355          | Power panic saved feed multiplier                 | ???          | D3 Ax0d35 C2
+| 0x0D34 3380 | uint8   | EEPROM_BACKLIGHT_LEVEL_HIGH           | 00h - ffh    | 82h 130               | LCD backlight bright: __128__ Dim value to 255    | LCD menu     | D3 Ax0d34 C1
+| 0x0D33 3379 | uint8   | EEPROM_BACKLIGHT_LEVEL_LOW            | 00h - ffh    | 32h 50                | LCD backlight dim: __50__ 0 to Bright value       | LCD menu     | D3 Ax0d33 C1
+| 0x0D32 3378 | uint8   | EEPROM_BACKLIGHT_MODE                 | 02h 2        | ffh 255               | LCD backlight mode: __Auto__                      | LCD menu     | D3 Ax0d32 C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | LCD backlight mode: __Bright__                    | ^            | ^
+| ^           | ^       | ^                                     | 00h 0        | ^                     | LCD backlight mode: __Dim__                       | ^            | ^
+| 0x0D30 3376 | uint16  | EEPROM_BACKLIGHT_TIMEOUT              | 01 00 - ff ff| 0a 00h 65535          | LCD backlight timeout: __10__ seconds             | LCD menu     | D3 Ax0d30 C2
+| 0x0D2C 3372 | float   | EEPROM_UVLO_LA_K                      | ???          | ff ff ff ffh          | Power panic saved Linear Advanced K value         | ???          | D3 Ax0d2c C4
+| 0x0D2B 3371 | uint8   | EEPROM_ALTFAN_OVERRIDE                | ffh 255      | ffh 255               | ALTFAN override unknown state                     | LCD menu     | D3 Ax0d2b C1
+| ^           | ^       | ^                                     | 00h 0        | ^                     | ALTFAN override deactivated                       | ^            | ^
+| ^           | ^       | ^                                     | 01h 1        | ^                     | ALTFAN override activated                         | ^            | ^
+| 0x0D2A 3370 | uint8   | EEPROM_EXPERIMENTAL_VISIBILITY        | ffh 255      | ffh 255               | Experimental menu visibility unknown state        | LCD menu     | D3 Ax0d2a C1
+| ^           | ^       | ^                                     | 00h 0        | ^                     | Experimental menu visibility hidden               | ^            | ^
+| ^           | ^       | ^                                     | 01h 1        | ^                     | Experimental menu visibility visible              | ^            | ^
+| 0x0D29 3369 | uint8   | EEPROM_PINDA_TEMP_COMPENSATION        | ffh 255      | ffh 255               | PINDA temp compensation unknown state             | LCD menu     | D3 Ax0d29 C1
+| ^           | ^       | ^                                     | 00h 0        | ^                     | PINDA has no temp compensation PINDA v1/2         | ^            | ^
+| ^           | ^       | ^                                     | 01h 1        | ^                     | PINDA has temp compensation aka SuperPINDA        | ^            | ^
+| 0x0D15 3349 | char[20]| EEPROM_PRUSA_SN                       | SN[19] == 0  | ffffffffffffffff...   | PRUSA Serial number string                        | PRUSA SN     | D3 Ax0d15 C20
+| 0x0D11 3345 | float   | EEPROM_UVLO_ACCELL                    | ???          | ff ff ff ffh          | Power panic saved normal acceleration             | ???          | D3 Ax0d11 C4
+| 0x0D0D 3341 | float   | EEPROM_UVLO_RETRACT_ACCELL            | ???          | ff ff ff ffh          | Power panic saved retract acceleration            | ???          | D3 Ax0d0d C4
+| 0x0D09 3337 | float   | EEPROM_UVLO_TRAVEL_ACCELL             | ???          | ff ff ff ffh          | Power panic saved travel acceleration             | ???          | D3 Ax0d09 C4
+| 0x0D05 3333 | unint32 | EEPROM_JOB_ID                         | ???          | 00 00 00 00h            | Job ID used by host software                    | D3 only      | D3 Ax0d05 C4
+| 0x0D04 3332 | uint8   | EEPROM_ECOOL_ENABLE                   | ffh 255      | ^                     | Disable extruder motor scaling for non-farm print | LCD menu     | D3 Ax0d04 C1
+| ^           | ^       | ^                                     | 2ah 42       | ^                     | Enable extruder motor scaling for non-farm print  | ^            | D3 Ax0d04 C1
+| 0x0D03 3331 | uint8   | EEPROM_FW_CRASH_FLAG                  | ffh 255      | ffh 255               | Last FW crash reason (dump_crash_reason)          | D21/D22      | D3 Ax0d03 C1
+| ^           | ^       | ^                                     | 00h 0        | ^                     | manual                                            | ^            | ^
+| ^           | ^       | ^                                     | 01h 1        | ^                     | stack_error                                       | ^            | ^
+| ^           | ^       | ^                                     | 02h 2        | ^                     | watchdog                                          | ^            | ^
+| ^           | ^       | ^                                     | 03h 3        | ^                     | bad_isr                                           | ^            | ^
+| ^           | ^       | ^                                     | 04h 4        | ^                     | bad_pullup_temp_isr                               | ^            | ^
+| ^           | ^       | ^                                     | 05h 5        | ^                     | bad_pullup_step_isr                               | ^            | ^
+| 0x0D02 3330 | uint8   | EEPROM_TEMP_MODEL_ENABLE              | 00h 0        | ff/00                 | Temp model deactivated                            | Temp model   | D3 Ax0d02 C1
+| ^           | ^       | ^                                     | 01h 1        | ^                     | Temp model activated                              | ^            | ^
+| 0x0CFE 3326 | float   | EEPROM_TEMP_MODEL_P                   | ???          | ff ff ff ffh          | Temp model power (W)                              | Temp model   | D3 Ax0cfe C4
+| 0x0CFA 3322 | float   | EEPROM_TEMP_MODEL_C                   | ???          | ff ff ff ffh          | Temp model capacitance (J/K)                      | Temp model   | D3 Ax0cfa C4
+| 0x0CBA 3258 |float[16]| EEPROM_TEMP_MODEL_R                   | ???          | ff ff ff ffh          | Temp model resistance (K/W)                       | Temp model   | D3 Ax0cba C64
+| 0x0CB6 3254 | float   | EEPROM_TEMP_MODEL_Ta_corr             | ???          | ff ff ff ffh          | Temp model ambient temperature correction (K)     | Temp model   | D3 Ax0cb6 C4
+| 0x0CB2 3250 | float   | EEPROM_TEMP_MODEL_W                   | ???          | ff ff ff ffh          | Temp model warning threshold (K/s)                | Temp model   | D3 Ax0cb2 C4
+| 0x0CAE 3246 | float   | EEPROM_TEMP_MODEL_E                   | ???          | ff ff ff ffh          | Temp model error threshold (K/s)                  | Temp model   | D3 Ax0cae C4
+
+|Address begin|Bit/Type | Name                                  | Valid values | Default/FactoryReset  | Description                                       |Gcode/Function| Debug code
+| :--:        | :--:    | :--:                                  | :--:         | :--:                  | :--:                                              | :--:         | :--:
+| 0x0012 18   | uint16  | EEPROM_FIRMWARE_VERSION_END           | ???          | ff ffh 65535          | ???                                               | ???          | D3 Ax0012 C2
+| 0x0010 16   | uint16  | EEPROM_FIRMWARE_VERSION_FLAVOR        | ???          | ff ffh 65535          | ???                                               | ???          | D3 Ax0010 C2
+| 0x000E 14   | uint16  | EEPROM_FIRMWARE_VERSION_REVISION      | ???          | ff ffh 65535          | Firmware version revision number DEV/ALPHA/BETA/RC| ???          | D3 Ax000e C2
+| 0x000C 12   | uint16  | EEPROM_FIRMWARE_VERSION_MINOR         | ???          | ff ffh 65535          | Firmware version minor number                     | ???          | D3 Ax000c C2
+| 0x000A 10   | uint16  | EEPROM_FIRMWARE_VERSION_MAJOR         | ???          | ff ffh 65535          | Firmware version major number                     | ???          | D3 Ax000a C2
+| 0x0000 0    | char    | FW_PRUSA3D_MAGIC                      | ???          | ffffffffffffffffffff  | __`PRUSA3DFW`__                                   | ???          | D3 Ax0000 C10
 */

 #define EEPROM_EMPTY_VALUE 0xFF
@ -382,19 +390,19 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
 #define EEPROM_BED_CORRECTION_REAR  (EEPROM_BED_CORRECTION_FRONT-1)
 #define EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY (EEPROM_BED_CORRECTION_REAR-1)
 #define EEPROM_PRINT_FLAG (EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY-1)
-#define EEPROM_PROBE_TEMP_SHIFT (EEPROM_PRINT_FLAG - 2*5) //5 x int for storing pinda probe temp shift relative to 50 C; unit: motor steps 
+#define EEPROM_PROBE_TEMP_SHIFT (EEPROM_PRINT_FLAG - 2*5) //5 x int for storing pinda probe temp shift relative to 50 C; unit: motor steps
 #define EEPROM_TEMP_CAL_ACTIVE (EEPROM_PROBE_TEMP_SHIFT - 1)
 #define _EEPROM_FREE_NR6_ (EEPROM_TEMP_CAL_ACTIVE - 2*4) //4 x int (used to be for bowden lengths for SNMM)
 #define EEPROM_CALIBRATION_STATUS_PINDA (_EEPROM_FREE_NR6_ - 1) //0 - not calibrated; 1 - calibrated
 #define EEPROM_UVLO						(EEPROM_CALIBRATION_STATUS_PINDA - 1) //1 - uvlo during print
 #define EEPROM_UVLO_CURRENT_POSITION	(EEPROM_UVLO-2*4) // 2 x float for current_position in X and Y axes
 #define EEPROM_FILENAME (EEPROM_UVLO_CURRENT_POSITION - 8) //8chars to store filename without extension
-#define EEPROM_FILE_POSITION (EEPROM_FILENAME - 4) //32 bit for uint32_t file position 
+#define EEPROM_FILE_POSITION (EEPROM_FILENAME - 4) //32 bit for uint32_t file position
 #define EEPROM_UVLO_CURRENT_POSITION_Z	(EEPROM_FILE_POSITION - 4) //float for current position in Z
 #define EEPROM_UVLO_UNUSED_001		(EEPROM_UVLO_CURRENT_POSITION_Z - 1) // uint8_t (unused)
 #define EEPROM_UVLO_TARGET_BED			(EEPROM_UVLO_UNUSED_001 - 1)
 #define EEPROM_UVLO_FEEDRATE			(EEPROM_UVLO_TARGET_BED - 2) //uint16_t
-#define EEPROM_UVLO_FAN_SPEED			(EEPROM_UVLO_FEEDRATE - 1) 
+#define EEPROM_UVLO_FAN_SPEED			(EEPROM_UVLO_FEEDRATE - 1)
 #define EEPROM_FAN_CHECK_ENABLED		(EEPROM_UVLO_FAN_SPEED - 1)
 #define EEPROM_UVLO_MESH_BED_LEVELING     (EEPROM_FAN_CHECK_ENABLED - 9*2)
 #define EEPROM_UVLO_Z_MICROSTEPS     (EEPROM_UVLO_MESH_BED_LEVELING - 2) // uint16_t (could be removed)
@ -405,12 +413,12 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
 #define EEPROM_FREE_NR4         (EEPROM_UVLO_SAVED_SEGMENT_IDX - 1)							// FREE EEPROM SPACE
 #define EEPROM_FREE_NR5         (EEPROM_FREE_NR4 - 1)							// FREE EEPROM SPACE

-// Crash detection mode EEPROM setting 
-#define EEPROM_CRASH_DET         (EEPROM_FREE_NR5 - 1)       				    // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-12) 
+// Crash detection mode EEPROM setting
+#define EEPROM_CRASH_DET         (EEPROM_FREE_NR5 - 1)       				    // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-12)
 // Crash detection counter Y (last print)
 #define EEPROM_CRASH_COUNT_Y       (EEPROM_CRASH_DET - 1)                       // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-15)
-// Filament sensor on/off EEPROM setting 
-#define EEPROM_FSENSOR           (EEPROM_CRASH_COUNT_Y - 1)                     // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-14) 
+// Filament sensor on/off EEPROM setting
+#define EEPROM_FSENSOR           (EEPROM_CRASH_COUNT_Y - 1)                     // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-14)
 // Crash detection counter X (last print)
 #define EEPROM_CRASH_COUNT_X       (EEPROM_FSENSOR - 1)                         // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-15)
 // Filament runout/error coutner (last print)
@ -440,7 +448,7 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
 #define EEPROM_POWER_COUNT_TOT       (EEPROM_FERROR_COUNT_TOT - 2)             // uint16

 ////////////////////////////////////////
-// TMC2130 Accurate sensorless homing 
+// TMC2130 Accurate sensorless homing

 // X-axis home origin (stepper phase in microsteps, 0..63 for 16ustep resolution)
 #define EEPROM_TMC2130_HOME_X_ORIGIN           (EEPROM_POWER_COUNT_TOT - 1)                    // uint8
@ -505,7 +513,7 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
 #define EEPROM_UVLO_MESH_BED_LEVELING_FULL     (EEPROM_MMU_CUTTER_ENABLED - 12*12*2) //allow 12 calibration points for future expansion

 #define EEPROM_MBL_TYPE	(EEPROM_UVLO_MESH_BED_LEVELING_FULL-1) //uint8_t for mesh bed leveling precision
-#define EEPROM_MBL_MAGNET_ELIMINATION (EEPROM_MBL_TYPE -1)  
+#define EEPROM_MBL_MAGNET_ELIMINATION (EEPROM_MBL_TYPE -1)
 #define EEPROM_MBL_POINTS_NR (EEPROM_MBL_MAGNET_ELIMINATION -1) //uint8_t number of points in one exis for mesh bed leveling
 #define EEPROM_MBL_PROBE_NR (EEPROM_MBL_POINTS_NR-1) //number of measurements for each point

--- a/Firmware/fancheck.cpp
+++ b/Firmware/fancheck.cpp
@ -37,7 +37,7 @@ volatile uint8_t fan_check_error = EFCE_OK;

 void setExtruderAutoFanState(uint8_t state)
 {
-    //If bit 1 is set (0x02), then the extruder fan speed won't be adjusted according to temperature. Useful for forcing
+    //If bit 1 is set (0x02), then the hotend fan speed won't be adjusted according to temperature. Useful for forcing
    //the fan to either On or Off during certain tests/errors.

    fanState = state;
@ -62,7 +62,7 @@ void countFanSpeed()
    fan_speed[0] = (fan_edge_counter[0] * (float(250) / (_millis() - extruder_autofan_last_check)));
    fan_speed[1] = (fan_edge_counter[1] * (float(250) / (_millis() - extruder_autofan_last_check)));
    /*SERIAL_ECHOPGM("time interval: "); MYSERIAL.println(_millis() - extruder_autofan_last_check);
-    SERIAL_ECHOPGM("extruder fan speed:"); MYSERIAL.print(fan_speed[0]); SERIAL_ECHOPGM("; edge counter:"); MYSERIAL.println(fan_edge_counter[0]);
+    SERIAL_ECHOPGM("hotend fan speed:"); MYSERIAL.print(fan_speed[0]); SERIAL_ECHOPGM("; edge counter:"); MYSERIAL.println(fan_edge_counter[0]);
    SERIAL_ECHOPGM("print fan speed:"); MYSERIAL.print(fan_speed[1]); SERIAL_ECHOPGM("; edge counter:"); MYSERIAL.println(fan_edge_counter[1]);
    SERIAL_ECHOLNPGM(" ");*/
    fan_edge_counter[0] = 0;
@ -101,7 +101,7 @@ void fanSpeedError(unsigned char _fan) {
    }
    switch (_fan) {
    case 0:	// extracting the same code from case 0 and case 1 into a function saves 72B
-        fanSpeedErrorBeep(PSTR("Extruder fan speed is lower than expected"), MSG_FANCHECK_EXTRUDER);
+        fanSpeedErrorBeep(PSTR("Hotend fan speed is lower than expected"), MSG_FANCHECK_HOTEND);
        break;
    case 1:
        fanSpeedErrorBeep(PSTR("Print fan speed is lower than expected"), MSG_FANCHECK_PRINT);
@ -114,10 +114,10 @@ void checkFanSpeed()
    uint8_t max_fan_errors[2];
 #ifdef FAN_SOFT_PWM
    max_fan_errors[1] = 3;  // 15 seconds (Print fan)
-    max_fan_errors[0] = 2;  // 10 seconds (Extruder fan)
+    max_fan_errors[0] = 2;  // 10 seconds (Hotend fan)
 #else //FAN_SOFT_PWM
    max_fan_errors[1] = 15; // 15 seconds (Print fan)
-    max_fan_errors[0] = 5;  // 5  seconds (Extruder fan)
+    max_fan_errors[0] = 5;  // 5  seconds (Hotend fan)
 #endif //FAN_SOFT_PWM

    if(fans_check_enabled)
--- a/Firmware/lcd.cpp
+++ b/Firmware/lcd.cpp
@ -528,6 +528,15 @@ void lcd_print(const char* s)
 	while (*s) lcd_write(*(s++));
 }

+void lcd_print_pad(const char* s, uint8_t len)
+{
+    while (len && *s) {
+        lcd_write(*(s++));
+        --len;
+    }
+    lcd_space(len);
+}
+
 void lcd_print(char c, int base)
 {
 	lcd_print((long) c, base);
--- a/Firmware/lcd.h
+++ b/Firmware/lcd.h
@ -53,6 +53,7 @@ extern void lcd_printNumber(unsigned long n, uint8_t base);
 extern void lcd_printFloat(double number, uint8_t digits);

 extern void lcd_print(const char*);
+extern void lcd_print_pad(const char*, uint8_t len);
 extern void lcd_print(char, int = 0);
 extern void lcd_print(unsigned char, int = 0);
 extern void lcd_print(int, int = 10);
@ -203,11 +204,12 @@ private:
 extern void lcd_set_custom_characters(void);
 extern void lcd_set_custom_characters_nextpage(void);

-//! @brief Consume click event
+//! @brief Consume click and longpress event
 inline void lcd_consume_click()
 {
    lcd_button_pressed = 0;
    lcd_buttons &= 0xff^EN_C;
+    lcd_longpress_trigger = 0;
 }


--- a/Firmware/messages.cpp
+++ b/Firmware/messages.cpp
@ -32,8 +32,8 @@ const char MSG_FANS_CHECK[] PROGMEM_I1 = ISTR("Fans check"); ////MSG_FANS_CHECK
 const char MSG_FIL_RUNOUTS[] PROGMEM_I1 = ISTR("Fil. runouts"); ////MSG_FIL_RUNOUTS c=15
 const char MSG_FILAMENT[] PROGMEM_I1 = ISTR("Filament"); ////MSG_FILAMENT c=17
 const char MSG_FAN_SPEED[] PROGMEM_I1 = ISTR("Fan speed"); ////MSG_FAN_SPEED c=14
-const char MSG_EXTRUDER_FAN_SPEED[] PROGMEM_I1 = ISTR("Extruder fan:");////MSG_EXTRUDER_FAN_SPEED c=16
-const char MSG_PRINT_FAN_SPEED[] PROGMEM_I1 = ISTR("Print fan:"); ////MSG_PRINT_FAN_SPEED c=16
+const char MSG_HOTEND_FAN_SPEED[] PROGMEM_I1 = ISTR("Hotend fan:");////MSG_HOTEND_FAN_SPEED c=15
+const char MSG_PRINT_FAN_SPEED[] PROGMEM_I1 = ISTR("Print fan:"); ////MSG_PRINT_FAN_SPEED c=15
 const char MSG_FILAMENT_CLEAN[] PROGMEM_I1 = ISTR("Filament extruding & with correct color?"); ////MSG_FILAMENT_CLEAN c=20 r=2
 const char MSG_FILAMENT_LOADED[] PROGMEM_I1 = ISTR("Is filament loaded?"); ////MSG_FILAMENT_LOADED c=20 r=2
 const char MSG_FILAMENTCHANGE[] PROGMEM_I1 = ISTR("Change filament"); ////MSG_FILAMENTCHANGE c=18
@ -81,7 +81,7 @@ const char MSG_RESET[] PROGMEM_I1 = ISTR("Reset"); ////MSG_RESET c=14
 const char MSG_RESUME_PRINT[] PROGMEM_I1 = ISTR("Resume print"); ////MSG_RESUME_PRINT c=18
 const char MSG_RESUMING_PRINT[] PROGMEM_I1 = ISTR("Resuming print"); ////MSG_RESUMING_PRINT c=20
 const char MSG_SELFTEST_PART_FAN[] PROGMEM_I1 = ISTR("Front print fan?"); ////MSG_SELFTEST_PART_FAN c=20
-const char MSG_SELFTEST_EXTRUDER_FAN[] PROGMEM_I1 = ISTR("Left hotend fan?"); ////MSG_SELFTEST_EXTRUDER_FAN c=20
+const char MSG_SELFTEST_HOTEND_FAN[] PROGMEM_I1 = ISTR("Left hotend fan?"); ////MSG_SELFTEST_HOTEND_FAN c=20
 const char MSG_SELFTEST_FAILED[] PROGMEM_I1 = ISTR("Selftest failed"); ////MSG_SELFTEST_FAILED c=20
 const char MSG_SELFTEST_FAN[] PROGMEM_I1 = ISTR("Fan test"); ////MSG_SELFTEST_FAN c=20
 const char MSG_SELFTEST_FAN_NO[] PROGMEM_I1 = ISTR("Not spinning"); ////MSG_SELFTEST_FAN_NO c=19
@ -167,6 +167,9 @@ extern const char MSG_THERMAL_ANOMALY[] PROGMEM_I1 = ISTR("THERMAL ANOMALY");///
 #endif

 //not internationalized messages
+#if 0
+const char MSG_FW_VERSION_BETA[] PROGMEM_N1 = "You are using a BETA firmware version! It is in a development state! Use this version with CAUTION as it may DAMAGE the printer!"; ////MSG_FW_VERSION_BETA c=20 r=8
+#endif
 const char MSG_AUTO_DEPLETE[] PROGMEM_N1 = "SpoolJoin"; ////MSG_AUTO_DEPLETE c=13
 const char MSG_FIRMWARE[] PROGMEM_N1 = "Firmware"; ////MSG_FIRMWARE c=8
 const char MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY[] PROGMEM_N1 = "FlashAir"; ////MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY c=8
@ -201,8 +204,8 @@ const char MSG_OCTOPRINT_PAUSED[] PROGMEM_N1 = "// action:paused"; ////
 const char MSG_OCTOPRINT_ASK_RESUME[] PROGMEM_N1 = "// action:resume"; ////
 const char MSG_OCTOPRINT_RESUMED[] PROGMEM_N1 = "// action:resumed"; ////
 const char MSG_OCTOPRINT_CANCEL[] PROGMEM_N1 = "// action:cancel"; ////
-const char MSG_FANCHECK_EXTRUDER[] PROGMEM_N1 = "Err: EXTR. FAN ERROR"; ////c=20
-const char MSG_FANCHECK_PRINT[] PROGMEM_N1 = "Err: PRINT FAN ERROR"; ////c=20
+const char MSG_FANCHECK_HOTEND[] PROGMEM_N1 = "Err:HOTEND FAN ERROR"; ////c=20
+const char MSG_FANCHECK_PRINT[] PROGMEM_N1 = "Err:PRINT FAN ERROR"; ////c=20
 const char MSG_M112_KILL[] PROGMEM_N1 = "M112 called. Emergency Stop."; ////c=20
 const char MSG_ADVANCE_K[] PROGMEM_N1 = "Advance K:"; ////c=13
 const char MSG_POWERPANIC_DETECTED[] PROGMEM_N1 = "POWER PANIC DETECTED"; ////c=20
--- a/Firmware/messages.h
+++ b/Firmware/messages.h
@ -38,7 +38,7 @@ extern const char MSG_FANS_CHECK[];
 extern const char MSG_FIL_RUNOUTS[];
 extern const char MSG_FILAMENT[];
 extern const char MSG_FAN_SPEED[];
-extern const char MSG_EXTRUDER_FAN_SPEED[];
+extern const char MSG_HOTEND_FAN_SPEED[];
 extern const char MSG_PRINT_FAN_SPEED[];
 extern const char MSG_FILAMENT_CLEAN[];
 extern const char MSG_FILAMENT_LOADED[];
@ -72,7 +72,6 @@ extern const char MSG_NO[];
 extern const char MSG_NOZZLE[];
 extern const char MSG_PAPER[];
 extern const char MSG_PAUSE_PRINT[];
-extern const char MSG_PINDA[];
 extern const char MSG_PLACE_STEEL_SHEET[];
 extern const char MSG_PLEASE_WAIT[];
 extern const char MSG_POWER_FAILURES[];
@ -86,9 +85,8 @@ extern const char MSG_REMOVE_STEEL_SHEET[];
 extern const char MSG_RESET[];
 extern const char MSG_RESUME_PRINT[];
 extern const char MSG_RESUMING_PRINT[];
-extern const char MSG_SD_WORKDIR_FAIL[];
 extern const char MSG_SELFTEST_PART_FAN[];
-extern const char MSG_SELFTEST_EXTRUDER_FAN[];
+extern const char MSG_SELFTEST_HOTEND_FAN[];
 extern const char MSG_SELFTEST_FAILED[];
 extern const char MSG_SELFTEST_FAN[];
 extern const char MSG_SELFTEST_FAN_NO[];
@ -126,24 +124,20 @@ extern const char MSG_WIZARD_WELCOME[];
 extern const char MSG_WIZARD_WELCOME_SHIPPING[];
 extern const char MSG_YES[];
 extern const char MSG_V2_CALIBRATION[];
-extern const char MSG_WELCOME[];
 extern const char MSG_OFF[];
 extern const char MSG_ON[];
 extern const char MSG_NA[];
-extern const char MSG_AUTO_DEPLETE[];
 extern const char MSG_CUTTER[];
 extern const char MSG_NONE[];
 extern const char MSG_WARN[];
 extern const char MSG_STRICT[];
 extern const char MSG_MODEL[];
-extern const char MSG_FIRMWARE[];
 extern const char MSG_GCODE[];
 extern const char MSG_GCODE_DIFF_PRINTER_CONTINUE[];
 extern const char MSG_GCODE_DIFF_PRINTER_CANCELLED[];
 extern const char MSG_NOZZLE_DIAMETER[];
 extern const char MSG_MMU_MODE[];
 extern const char MSG_SD_CARD[];
-extern const char MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY[];
 extern const char MSG_SORT[];
 extern const char MSG_SORT_TIME[];
 extern const char MSG_SORT_ALPHA[];
@ -177,6 +171,15 @@ extern const char MSG_THERMAL_ANOMALY[];
 #endif

 //not internationalized messages
+#if 0
+extern const char MSG_FW_VERSION_BETA[];
+#endif
+extern const char MSG_AUTO_DEPLETE[];
+extern const char MSG_FIRMWARE[];
+extern const char MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY[];
+extern const char MSG_PINDA[];
+extern const char MSG_WELCOME[];
+extern const char MSG_SD_WORKDIR_FAIL[];
 extern const char MSG_BROWNOUT_RESET[];
 extern const char MSG_EXTERNAL_RESET[];
 extern const char MSG_FILE_SAVED[];
@ -207,7 +210,7 @@ extern const char MSG_OCTOPRINT_PAUSED[];
 extern const char MSG_OCTOPRINT_ASK_RESUME[];
 extern const char MSG_OCTOPRINT_RESUMED[];
 extern const char MSG_OCTOPRINT_CANCEL[];
-extern const char MSG_FANCHECK_EXTRUDER[];
+extern const char MSG_FANCHECK_HOTEND[];
 extern const char MSG_FANCHECK_PRINT[];
 extern const char MSG_M112_KILL[];
 extern const char MSG_ADVANCE_K[];
--- a/Firmware/pins_Rambo_1_0.h
+++ b/Firmware/pins_Rambo_1_0.h
@ -78,7 +78,7 @@
 #define PS_ON_PIN           -1
 #define KILL_PIN            -1  // 80 with Smart Controller LCD
 #define SUICIDE_PIN         -1  // PIN that has to be turned on right after start, to keep power flowing.
-#define TACH_0				30	// noctua extruder fan
+#define TACH_0				30	// noctua hotend fan


 //#define KILL_PIN            32
--- a/Firmware/pins_Rambo_1_3.h
+++ b/Firmware/pins_Rambo_1_3.h
@ -81,7 +81,7 @@
 #define PS_ON_PIN           -1
 #define KILL_PIN            -1  // 80 with Smart Controller LCD
 #define SUICIDE_PIN         -1  // PIN that has to be turned on right after start, to keep power flowing.
-#define TACH_0				30	// noctua extruder fan
+#define TACH_0				30	// noctua hotend fan


 //#define KILL_PIN            32
--- a/Firmware/temp_model.h
+++ b/Firmware/temp_model.h
@ -59,6 +59,7 @@ struct model_data
 };

 static bool enabled;          // model check enabled
+static bool valid = false;    // model is valid
 static bool warn_beep = true; // beep on warning threshold
 static model_data data;       // default heater data

--- a/Firmware/temperature.cpp
+++ b/Firmware/temperature.cpp
@ -886,7 +886,7 @@ void soft_pwm_init()
  OCR2B = 128;
  ENABLE_SOFT_PWM_INTERRUPT();

-  timer4_init(); //for tone and Extruder fan PWM
+  timer4_init(); //for tone and Hotend fan PWM
 }

 #if (defined (TEMP_RUNAWAY_BED_HYSTERESIS) && TEMP_RUNAWAY_BED_TIMEOUT > 0) || (defined (TEMP_RUNAWAY_EXTRUDER_HYSTERESIS) && TEMP_RUNAWAY_EXTRUDER_TIMEOUT > 0)
@ -1212,27 +1212,27 @@ FORCE_INLINE static void soft_pwm_core()
  static unsigned char slow_pwm_count = 0;
  static unsigned char state_heater_0 = 0;
  static unsigned char state_timer_heater_0 = 0;
-#endif 
+#endif
 #if (EXTRUDERS > 1) || defined(HEATERS_PARALLEL)
  static unsigned char soft_pwm_1;
 #ifdef SLOW_PWM_HEATERS
  static unsigned char state_heater_1 = 0;
  static unsigned char state_timer_heater_1 = 0;
-#endif 
+#endif
 #endif
 #if EXTRUDERS > 2
  static unsigned char soft_pwm_2;
 #ifdef SLOW_PWM_HEATERS
  static unsigned char state_heater_2 = 0;
  static unsigned char state_timer_heater_2 = 0;
-#endif 
+#endif
 #endif
 #if HEATER_BED_PIN > -1
  // @@DR static unsigned char soft_pwm_b;
 #ifdef SLOW_PWM_HEATERS
  static unsigned char state_heater_b = 0;
  static unsigned char state_timer_heater_b = 0;
-#endif 
+#endif
 #endif
  
 #if defined(FILWIDTH_PIN) &&(FILWIDTH_PIN > -1)
@ -2506,6 +2506,7 @@ static void temp_model_reset_enabled(bool enabled)
 {
    TempMgrGuard temp_mgr_guard;
    temp_model::enabled = enabled;
+    temp_model::valid = enabled;
    temp_model::data.flag_bits.uninitialized = true;
 }

@ -2516,11 +2517,19 @@ void temp_model_set_enabled(bool enabled)
        TempMgrGuard temp_mgr_guard;
        temp_model::enabled = enabled;
        temp_model::setup();
+        temp_model::valid = true;
    }

    // verify that the model has been enabled
-    if(enabled && !temp_model::enabled)
+    if(enabled && !temp_model::enabled) {
        SERIAL_ECHOLNPGM("TM: invalid parameters, cannot enable");
+        temp_model::valid = false;
+    }
+}
+
+bool temp_model_valid()
+{
+  return temp_model::valid;
 }

 void temp_model_set_warn_beep(bool enabled)
@ -2582,6 +2591,7 @@ void temp_model_reset_settings()
    temp_model::data.err = TEMP_MODEL_E;
    temp_model::warn_beep = true;
    temp_model::enabled = false;
+    temp_model::valid = false;
 }

 void temp_model_load_settings()
@ -2779,21 +2789,26 @@ static bool autotune(int16_t cal_temp)
 {
    uint16_t samples;
    float e;
-
+    char tm_message[20];
    // bootstrap C/R values without fan
    set_fan_speed(0);

    for(uint8_t i = 0; i != 2; ++i) {
-        const char* PROGMEM verb = (i == 0? PSTR("initial"): PSTR("refining"));
-
+        const char* PROGMEM verb = (i == 0? PSTR("initial"): PSTR("refine"));
        target_temperature[0] = 0;
        if(current_temperature[0] >= TEMP_MODEL_CAL_Tl) {
-            printf_P(PSTR("TM: cooling down to %dC\n"), TEMP_MODEL_CAL_Tl);
+//!01234567890123456789|
+//!TM: cool down <50C  |
+            sprintf_P(tm_message, PSTR("TM: cool down <%dC"), TEMP_MODEL_CAL_Tl);
+            lcd_setstatus_serial(tm_message);
            cooldown(TEMP_MODEL_CAL_Tl);
            wait(10000);
        }
-
-        printf_P(PSTR("TM: %S C estimation\n"), verb);
+//!01234567890123456789|
+//!TM: initial R est.  |
+//!TM: refine R est.   |
+        sprintf_P(tm_message, PSTR("TM: %S C est."), verb);
+        lcd_setstatus_serial(tm_message);
        target_temperature[0] = cal_temp;
        samples = record();
        if(temp_error_state.v || !samples)
@ -2812,8 +2827,11 @@ static bool autotune(int16_t cal_temp)
        wait_temp();
        if(i) break; // we don't need to refine R
        wait(30000); // settle PID regulation
-
-        printf_P(PSTR("TM: %S R estimation @ %dC\n"), verb, cal_temp);
+//!01234567890123456789|
+//!TM: initial R 230C  |
+//!TM: refine R 230C   |
+        sprintf_P(tm_message, PSTR("TM: %S R %dC"), verb, cal_temp);
+        lcd_setstatus_serial(tm_message);
        samples = record();
        if(temp_error_state.v || !samples)
            return true;
@ -2836,8 +2854,10 @@ static bool autotune(int16_t cal_temp)
        uint8_t speed = 256 / TEMP_MODEL_R_SIZE * (i + 1) - 1;
        set_fan_speed(speed);
        wait(10000);
-
-        printf_P(PSTR("TM: R[%u] estimation\n"), (unsigned)i);
+//!01234567890123456789|
+//!TM: R[15] estimat.  |
+        sprintf_P(tm_message, PSTR("TM: R[%u] estimat."), (unsigned)i);
+        lcd_setstatus_serial(tm_message);
        samples = record();
        if(temp_error_state.v || !samples)
            return true;
@ -2873,30 +2893,34 @@ static bool autotune(int16_t cal_temp)

 void temp_model_autotune(int16_t temp, bool selftest)
 {
+    char tm_message[20];
    if(moves_planned() || printer_active()) {
-        SERIAL_ECHOLNPGM("TM: printer needs to be idle for calibration");
+//!01234567890123456789|
+//!TM: Cal. NOT ILDE   |
+        sprintf_P(tm_message, PSTR("TM: Cal. NOT IDLE"));
+        lcd_setstatus_serial(tm_message);
        return;
    }

    // lockout the printer during calibration
    KEEPALIVE_STATE(IN_PROCESS);
    menu_set_block(MENU_BLOCK_TEMP_MODEL_AUTOTUNE);
-    lcd_setstatuspgm(_i("Temp. model autotune")); ////MSG_TEMP_MODEL_AUTOTUNE c=20
    lcd_return_to_status();

    // set the model checking state during self-calibration
    bool was_enabled = temp_model::enabled;
    temp_model_reset_enabled(selftest);
-
-    SERIAL_ECHOLNPGM("TM: autotune start");
+    SERIAL_ECHOLNPGM("TM: calibration start");
    bool err = temp_model_cal::autotune(temp > 0 ? temp : TEMP_MODEL_CAL_Th);

    // always reset temperature
    disable_heater();

    if(err) {
-        SERIAL_ECHOLNPGM("TM: autotune failed");
-        lcd_setstatuspgm(_i("TM autotune failed")); ////MSG_TM_AUTOTUNE_FAILED c=20
+//!01234567890123456789|
+//!TM: calibr. failed! |
+        sprintf_P(tm_message, PSTR("TM: calibr. failed!"));
+        lcd_setstatus_serial(tm_message);
        if(temp_error_state.v)
            temp_model_cal::set_fan_speed(255);
    } else {
@ -2906,6 +2930,7 @@ void temp_model_autotune(int16_t temp, bool selftest)
        temp_model_report_settings();
    }

+    lcd_consume_click();
    menu_unset_block(MENU_BLOCK_TEMP_MODEL_AUTOTUNE);
 }

--- a/Firmware/temperature.h
+++ b/Firmware/temperature.h
@ -218,6 +218,7 @@ void PID_autotune(float temp, int extruder, int ncycles);

 #ifdef TEMP_MODEL
 void temp_model_set_enabled(bool enabled);
+bool temp_model_valid();
 void temp_model_set_warn_beep(bool enabled);
 void temp_model_set_params(float C = NAN, float P = NAN, float Ta_corr = NAN, float warn = NAN, float err = NAN);
 void temp_model_set_resistance(uint8_t index, float R);
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@ -94,7 +94,7 @@ static float manual_feedrate[] = MANUAL_FEEDRATE;
 /* LCD message status */
 static LongTimer lcd_status_message_timeout;
 static uint8_t lcd_status_message_level;
-static char lcd_status_message[LCD_WIDTH + 1] = WELCOME_MSG;
+static char lcd_status_message[LCD_WIDTH + 1];

 /* !Configuration settings */

@ -214,7 +214,7 @@ enum class FanCheck : uint_least8_t {
 /**
 * Try to check fan working and wiring.
 *
- * @param _fan i fan number 0 means extruder fan, 1 means print fan.
+ * @param _fan i fan number 0 means hotend fan, 1 means print fan.
 *
 * @returns a TestError noerror, extruderFan, printFan or swappedFan.
 */
@ -242,9 +242,6 @@ static void lcd_cutter_enabled();
 #endif
 static void lcd_babystep_z();

-//! Beware: has side effects - forces lcd_draw_update to 2, which means clear the display
-void lcd_finishstatus();
-
 static void lcd_sdcard_menu();
 static void lcd_sheet_menu();

@ -617,7 +614,7 @@ void lcdui_print_status_line(void)
        case CustomMsg::M117:   // M117 Set the status line message on the LCD
        case CustomMsg::Status: // Nothing special, print status message normally
        case CustomMsg::M0Wait: // M0/M1 Wait command working even from SD
-            lcd_print(lcd_status_message);
+            lcd_print_pad(lcd_status_message, LCD_WIDTH);
        break;
        case CustomMsg::MeshBedLeveling: // If mesh bed leveling in progress, show the status
            if (custom_message_state > 10) {
@ -641,10 +638,10 @@ void lcdui_print_status_line(void)
            }
            break;
        case CustomMsg::FilamentLoading: // If loading filament, print status
-            lcd_print(lcd_status_message);
+            lcd_print_pad(lcd_status_message, LCD_WIDTH);
            break;
        case CustomMsg::PidCal: // PID tuning in progress
-            lcd_print(lcd_status_message);
+            lcd_print_pad(lcd_status_message, LCD_WIDTH);
            if (pid_cycle <= pid_number_of_cycles && custom_message_state > 0) {
                lcd_set_cursor(10, 3);
                lcd_print(itostr3(pid_cycle));
@ -669,11 +666,6 @@ void lcdui_print_status_line(void)
            break;
        }
    }
-
-    // Fill the rest of line to have nice and clean output
-    for(uint8_t fillspace = 0; fillspace < LCD_WIDTH; fillspace++)
-        if ((lcd_status_message[fillspace] <= 31 ))
-            lcd_print(' ');
 }

 //! @brief Show Status Screen
@ -1048,8 +1040,27 @@ void lcd_commands()
 			lcd_commands_type = LcdCommands::Idle;
 		}
 	}
-
-
+#ifdef TEMP_MODEL
+    if (lcd_commands_type == LcdCommands::TempModel) {
+        if (lcd_commands_step == 0) {
+            lcd_commands_step = 3;
+        }
+        if (lcd_commands_step == 3) {
+            enquecommand_P(PSTR("M310 A F0"));
+            lcd_commands_step = 2;
+        }
+        if (lcd_commands_step ==2 && temp_model_valid()) {
+            enquecommand_P(PSTR("M310 S1"));
+            lcd_commands_step = 1;
+        }
+        //if (lcd_commands_step == 1 && calibrated()) {
+        if (lcd_commands_step == 1 && temp_model_valid()) {
+            enquecommand_P(PSTR("M500"));
+            lcd_commands_step = 0;
+            lcd_commands_type = LcdCommands::Idle;
+        }
+    }
+#endif //TEMP_MODEL
 }

 void lcd_return_to_status()
@ -1119,8 +1130,8 @@ static void pgmtext_with_colon(const char *ipgmLabel, char *dst, uint8_t dstSize
 //!
 //! @code{.unparsed}
 //! |01234567890123456789|
-//! |Extruder fan:   0000|	MSG_EXTRUDER_FAN_SPEED c=16
-//! |Print fan:      0000|	MSG_PRINT_FAN_SPEED c=16
+//! |Hotend fan:     0000|	MSG_HOTEND_FAN_SPEED c=15
+//! |Print fan:      0000|	MSG_PRINT_FAN_SPEED c=15
 //! |                    |
 //! |                    |
 //! ----------------------
@ -1131,7 +1142,7 @@ void lcd_menu_extruder_info()                     // NOT static due to using ins

    lcd_timeoutToStatus.stop(); //infinite timeout
    lcd_home();
-	lcd_printf_P(PSTR("%-16.16S%-4d\n" "%-16.16S%-4d\n"), _T(MSG_EXTRUDER_FAN_SPEED), 60*fan_speed[0], _T(MSG_PRINT_FAN_SPEED), 60*fan_speed[1] ); 
+	lcd_printf_P(PSTR("%-15.15S%-5d\n" "%-15.15S%-5d\n"), _T(MSG_HOTEND_FAN_SPEED), 60*fan_speed[0], _T(MSG_PRINT_FAN_SPEED), 60*fan_speed[1] ); 
    menu_back_if_clicked();
 }

@ -2975,6 +2986,7 @@ bool lcd_calibrate_z_end_stop_manual(bool only_z)
            if (lcd_clicked()) {
                // Abort a move if in progress.
                planner_abort_hard();
+                planner_aborted = false;
                while (lcd_clicked()) ;
                _delay(10);
                while (lcd_clicked()) ;
@ -3310,7 +3322,7 @@ void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, ui
            msg = _i("XYZ calibration failed. Right front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
        else
            // The left and maybe the center point out of reach.
-            msg = _i("XYZ calibration failed. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
+            msg = _n("XYZ calibration failed. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
        lcd_show_fullscreen_message_and_wait_P(msg);
    } else {
        if (point_too_far_mask != 0) {
@ -3322,7 +3334,7 @@ void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, ui
                msg = _i("XYZ calibration compromised. Right front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
            else
                // The left and maybe the center point out of reach.
-                msg = _i("XYZ calibration compromised. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
+                msg = _n("XYZ calibration compromised. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
            lcd_show_fullscreen_message_and_wait_P(msg);
        }
        if (point_too_far_mask == 0 || result > 0) {
@ -4928,6 +4940,9 @@ static void lcd_calibration_menu()
 	    MENU_ITEM_FUNCTION_P(_T(MSG_PINDA_CALIBRATION), lcd_calibrate_pinda);
    }
  }
+#ifdef TEMP_MODEL
+    MENU_ITEM_SUBMENU_P(_n("Temp Model cal."), lcd_temp_model_cal);
+#endif //TEMP_MODEL
  
  MENU_END();
 }
@ -5264,22 +5279,22 @@ static bool fan_error_selftest()
 	fanSpeedSoftPwm = 255;
 #endif //FAN_SOFT_PWM
    manage_heater(); //enables print fan
-    setExtruderAutoFanState(3); //force enables the extruder fan
+    setExtruderAutoFanState(3); //force enables the hotend fan
 #ifdef FAN_SOFT_PWM
    extruder_autofan_last_check = _millis();
    fan_measuring = true;
 #endif //FAN_SOFT_PWM
-    _delay(1000); //delay_keep_alive would turn off extruder fan, because temerature is too low (maybe)
+    _delay(1000); //delay_keep_alive would turn off hotend fan, because temerature is too low (maybe)
    manage_heater();
    fanSpeed = 0;
-	setExtruderAutoFanState(1); //releases lock on the extruder fan
+	setExtruderAutoFanState(1); //releases lock on the hotend fan
 #ifdef FAN_SOFT_PWM
    fanSpeedSoftPwm = 0;
 #endif //FAN_SOFT_PWM
    manage_heater();
 #ifdef TACH_0
-    if (fan_speed[0] <= 20) { //extruder fan error
-        LCD_ALERTMESSAGERPGM(MSG_FANCHECK_EXTRUDER);
+    if (fan_speed[0] <= 20) { //hotend fan error
+        LCD_ALERTMESSAGERPGM(MSG_FANCHECK_HOTEND);
        return 1;
    }
 #endif
@ -5989,6 +6004,14 @@ void lcd_print_stop()
    lcd_return_to_status();
 }

+#ifdef TEMP_MODEL
+void lcd_temp_model_cal()
+{
+    lcd_commands_type = LcdCommands::TempModel;
+    lcd_return_to_status();
+}
+#endif //TEMP_MODEL
+
 void lcd_sdcard_stop()
 {

@ -6305,7 +6328,7 @@ bool lcd_selftest()

 	_progress = lcd_selftest_screen(TestScreen::ExtruderFan, _progress, 3, true, 2000);
 #if (defined(FANCHECK) && defined(TACH_0))
-	switch (lcd_selftest_fan_auto(0)){		// check extruder Fan
+	switch (lcd_selftest_fan_auto(0)){		// check hotend fan
    case FanCheck::SwappedFan:
        _swapped_fan = true; // swapped is merely a hint (checked later)
        // FALLTHRU
@ -6349,7 +6372,7 @@ bool lcd_selftest()
 	}

 	if (_swapped_fan) {
-		//turn on print fan and check that left extruder fan is not spinning
+		//turn on print fan and check that left hotend fan is not spinning
 		_result = lcd_selftest_manual_fan_check(1, true);
 		if (_result) {
 			//print fan is stil turned on; check that it is spinning
@ -7007,7 +7030,7 @@ static void lcd_selftest_error(TestError testError, const char *_error_1, const
 		lcd_print(_error_1);
 		break;
 	case TestError::ExtruderFan:
-		lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_EXTRUDER_FAN));
+		lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_HOTEND_FAN));
 		lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_WIRINGERROR));
 		lcd_set_cursor(18, 3);
 		lcd_print(_error_1);
@ -7154,12 +7177,12 @@ static bool lcd_selftest_manual_fan_check(int _fan, bool check_opposite,
 	{
 	case 0:
 		// extruder cooling fan
-		lcd_puts_at_P(0, 1, check_opposite ? _T(MSG_SELFTEST_PART_FAN) : _T(MSG_SELFTEST_EXTRUDER_FAN));
+		lcd_puts_at_P(0, 1, check_opposite ? _T(MSG_SELFTEST_PART_FAN) : _T(MSG_SELFTEST_HOTEND_FAN));
 		setExtruderAutoFanState(3);
 		break;
 	case 1:
 		// object cooling fan
-		lcd_puts_at_P(0, 1, check_opposite ? _T(MSG_SELFTEST_EXTRUDER_FAN) : _T(MSG_SELFTEST_PART_FAN));
+		lcd_puts_at_P(0, 1, check_opposite ? _T(MSG_SELFTEST_HOTEND_FAN) : _T(MSG_SELFTEST_PART_FAN));
 		SET_OUTPUT(FAN_PIN);
 #ifdef FAN_SOFT_PWM
 		fanSpeedSoftPwm = 255;
@ -7266,10 +7289,10 @@ static FanCheck lcd_selftest_fan_auto(uint8_t _fan)

 	switch (_fan) {
 	case 0:
-        setExtruderAutoFanState(3); // extruder fan
+        setExtruderAutoFanState(3); // hotend fan
        lcd_selftest_setfan(0); // print fan off
        lcd_selftest_measure_fans(2, 18, 2);
-        setExtruderAutoFanState(0); // extruder fan off
+        setExtruderAutoFanState(0); // hotend fan off
 		if (fan_speed[0] < failThr) {
 			return FanCheck::ExtruderFan;
 		}
@ -7326,7 +7349,7 @@ static uint8_t lcd_selftest_screen(TestScreen screen, uint8_t _progress, uint8_t
 	if ((screen >= TestScreen::ExtruderFan) && (screen <= TestScreen::FansOk))
 	{
 		//SERIAL_ECHOLNPGM("Fan test");
-		lcd_puts_at_P(0, 2, _T(MSG_EXTRUDER_FAN_SPEED));
+		lcd_puts_at_P(0, 2, _T(MSG_HOTEND_FAN_SPEED));
 		lcd_set_cursor(18, 2);
 		(screen < TestScreen::PrintFan) ? lcd_print(_indicator) : lcd_print("OK");
 		lcd_puts_at_P(0, 3, _T(MSG_PRINT_FAN_SPEED));
@ -7427,7 +7450,6 @@ static bool check_file(const char* filename) {
 	card.printingHasFinished();

 	lcd_setstatuspgm(MSG_WELCOME);
-	lcd_finishstatus();
 	return result;
 }

@ -7518,6 +7540,9 @@ void ultralcd_init()
  lcd_oldcardstatus = IS_SD_INSERTED;
 #endif//(SDCARDDETECT > 0)
  lcd_encoder_diff = 0;
+
+  // Initialise status line
+  strncpy_P(lcd_status_message, MSG_WELCOME, LCD_WIDTH);
 }

 void lcd_ignore_click(bool b)
@ -7526,19 +7551,6 @@ void lcd_ignore_click(bool b)
  wait_for_unclick = false;
 }

-void lcd_finishstatus() {
-  SERIAL_PROTOCOLLNRPGM(MSG_LCD_STATUS_CHANGED);
-  int len = strlen(lcd_status_message);
-  if (len > 0) {
-    while (len < LCD_WIDTH) {
-      lcd_status_message[len++] = ' ';
-    }
-  }
-  lcd_status_message[LCD_WIDTH] = '\0';
-  lcd_draw_update = 2;
-
-}
-
 static bool lcd_message_check(uint8_t priority)
 {
    // regular priority check
@ -7561,7 +7573,9 @@ static void lcd_updatestatus(const char *message, bool progmem = false)
        strncpy(lcd_status_message, message, LCD_WIDTH);

 	lcd_status_message[LCD_WIDTH] = 0;
-	lcd_finishstatus();
+
+	SERIAL_PROTOCOLLNRPGM(MSG_LCD_STATUS_CHANGED);
+
 	// hack lcd_draw_update to 1, i.e. without clear
 	lcd_draw_update = 1;
 }
@ -7578,15 +7592,28 @@ void lcd_setstatuspgm(const char* message)
        lcd_updatestatus(message, true);
 }

+void lcd_setstatus_serial(const char* message)
+{
+    if (lcd_message_check(LCD_STATUS_NONE))
+        lcd_updatestatus(message);
+    SERIAL_ECHOLN(message);
+}
+
 void lcd_setalertstatus_(const char* message, uint8_t severity, bool progmem)
 {
    if (lcd_message_check(severity)) {
+        bool same = !(progmem?
+            strcmp_P(lcd_status_message, message):
+            strcmp(lcd_status_message, message));
        lcd_updatestatus(message, progmem);
        lcd_status_message_timeout.start();
        lcd_status_message_level = severity;
        custom_message_type = CustomMsg::Status;
        custom_message_state = 0;
-        lcd_return_to_status();
+        if (!same) {
+            // do not kick the user out of the menus if the message is unchanged
+            lcd_return_to_status();
+        }
    }
 }

@ -7612,7 +7639,10 @@ uint8_t get_message_level()

 void menu_lcd_longpress_func(void)
 {
-	backlight_wake();
+    // Wake up the LCD backlight and,
+    // start LCD inactivity timer
+    lcd_timeoutToStatus.start();
+    backlight_wake();
    if (homing_flag || mesh_bed_leveling_flag || menu_menu == lcd_babystep_z || menu_menu == lcd_move_z || menu_block_mask != MENU_BLOCK_NONE)
    {
        // disable longpress during re-entry, while homing, calibration or if a serious error
--- a/Firmware/ultralcd.h
+++ b/Firmware/ultralcd.h
@ -21,6 +21,7 @@ void ultralcd_init();
 // Set the current status message (equivalent to LCD_STATUS_NONE)
 void lcd_setstatus(const char* message);
 void lcd_setstatuspgm(const char* message);
+void lcd_setstatus_serial(const char* message);

 //! return to the main status screen and display the alert message
 //! Beware - it has sideeffects:
@ -47,6 +48,9 @@ void lcd_pause_print();
 void lcd_pause_usb_print();
 void lcd_resume_print();
 void lcd_print_stop();
+#ifdef TEMP_MODEL
+void lcd_temp_model_cal();
+#endif //TEMP_MODEL
 void lcd_load_filament_color_check();

 extern void lcd_belttest();
@ -107,6 +111,9 @@ enum class LcdCommands : uint_least8_t
 	LongPause,
 	PidExtruder,
 	Layer1Cal,
+#ifdef TEMP_MODEL
+    TempModel,
+#endif //TEMP_MODEL
 };

 extern LcdCommands lcd_commands_type;
--- a/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
@ -422,7 +422,7 @@
 #define TEMP_MODEL_C_thr 0.01 // C estimation iteration threshold
 #define TEMP_MODEL_C_itr 30   // C estimation iteration limit

-#define TEMP_MODEL_R 29.7     // initial guess for heatblock resistance (K/W)
+#define TEMP_MODEL_R 20.5     // initial guess for heatblock resistance (K/W)
 #define TEMP_MODEL_Rl 5       // R estimation lower limit
 #define TEMP_MODEL_Rh 50      // R estimation upper limit
 #define TEMP_MODEL_R_thr 0.01 // R estimation iteration threshold
--- a/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
@ -426,7 +426,7 @@
 #define TEMP_MODEL_C_thr 0.01 // C estimation iteration threshold
 #define TEMP_MODEL_C_itr 30   // C estimation iteration limit

-#define TEMP_MODEL_R 29.7     // initial guess for heatblock resistance (K/W)
+#define TEMP_MODEL_R 20.5     // initial guess for heatblock resistance (K/W)
 #define TEMP_MODEL_Rl 5       // R estimation lower limit
 #define TEMP_MODEL_Rh 50      // R estimation upper limit
 #define TEMP_MODEL_R_thr 0.01 // R estimation iteration threshold
--- a/PF-build.sh
+++ b/PF-build.sh
@ -85,7 +85,7 @@
 # 15 Feb 2019, 3d-gussner, troubleshooting and minor fixes
 # 16 Feb 2019, 3d-gussner, Script can be run using arguments
 #                          $1 = variant, example "1_75mm_MK3-EINSy10a-E3Dv6full.h" at this moment it is not possible to use ALL
-#                          $2 = multi language OR English only [ALL/EN_ONLY]
+#                          $2 = multi language OR English only [ALL/EN_FARM]
 #                          $3 = development status [GOLD/RC/BETA/ALPHA/DEVEL/DEBUG]
 #                          If one argument is wrong a list of valid one will be shown
 # 13 Mar 2019, 3d-gussner, MKbel updated the Linux build environment to version 1.0.2 with an Fix maximum firmware flash size.
@ -124,7 +124,7 @@
 #                          After compiling All multi-language variants it makes it easier to find missing or unused translations.
 # 12 May 2020, DRracer   , Cleanup double MK2/s MK25/s `not_tran` and `not_used` files
 # 13 May 2020, leptun    , If cleanup files do not exist don't try to.
-# 01 Oct 2020, 3d-gussner, Bug fix if using argument EN_ONLY. Thank to @leptun for pointing out.
+# 01 Oct 2020, 3d-gussner, Bug fix if using argument EN_FARM. Thank to @leptun for pointing out.
 #                          Change Build number to script commits 'git rev-list --count HEAD PF-build.sh'
 # 02 Oct 2020, 3d-gussner, Add UNKNOWN as argument option
 # 05 Oct 2020, 3d-gussner, Disable pause and warnings using command line with all needed arguments
@ -268,7 +268,7 @@ echo "  -d : '$(tput setaf 2)GOLD$(tput sgr0)', '$(tput setaf 2)RC$(tput sgr0)',
 echo "  -g : '$(tput setaf 2)0$(tput sgr0)' no '$(tput setaf 2)1$(tput sgr0)' lite '$(tput setaf 2)2$(tput sgr0)' fancy  '$(tput setaf 2)3$(tput sgr0)' lite  with Quad_HR '$(tput setaf 2)4$(tput sgr0)' fancy with Quad_HR"
 echo "  -i : '$(tput setaf 2)1.8.5$(tput sgr0)', '$(tput setaf 2)1.8.19$(tput sgr0)'"
 echo "  -j : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes"
-echo "  -l : '$(tput setaf 2)ALL$(tput sgr0)' for multi language or '$(tput setaf 2)EN_ONLY$(tput sgr0)' for English only"
+echo "  -l : '$(tput setaf 2)ALL$(tput sgr0)' for multi language or '$(tput setaf 2)EN_FARM$(tput sgr0)' for English only"
 echo "  -m : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes '$(tput setaf 2)2$(tput sgr0)' with MMU2"
 echo "  -n : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes"
 echo "  -o : '$(tput setaf 2)1$(tput sgr0)' force or '$(tput setaf 2)0$(tput sgr0)' block output and delays"
@ -530,19 +530,6 @@ fi
 }
 # End: Check python ... needed during language build

-#Start: Check gawk ... needed during language build
-check_gawk()
-{
-if ! type gawk > /dev/null; then
-    if [ $TARGET_OS == "linux" ]; then
-        echo "$(tput setaf 1)Missing 'gawk' which is important to run this script"
-        echo "install it with the command $(tput setaf 2)'sudo apt-get install gawk'."
-        #sudo apt-get update && apt-get install gawk
-        failures 4
-    fi
-fi
-}
-#End: Check gawk ... needed during language build

 #### Start: Set build environment 
 set_build_env_variables()
@ -551,20 +538,20 @@ BUILD_ENV="1.0.8"
 BOARD="prusa_einsy_rambo"
 BOARD_PACKAGE_NAME="PrusaResearch"
 if [ "$ARDUINO_ENV" == "1.8.19" ]; then
-    BOARD_VERSION="1.0.5-2"
+    BOARD_VERSION="1.0.6"
 else
    BOARD_VERSION="1.0.4"
 fi
 if [ "$ARDUINO_ENV" == "1.8.19" ]; then
-    BOARD_URL="https://raw.githubusercontent.com/prusa3d/Arduino_Boards/devel/IDE_Board_Manager/package_prusa3d_index.json"
-    #BOARD_URL="https://raw.githubusercontent.com/3d-gussner/Arduino_Boards/devel/IDE_Board_Manager/package_prusa3d_index.json"
+    BOARD_URL="https://raw.githubusercontent.com/prusa3d/Arduino_Boards/master/IDE_Board_Manager/package_prusa3d_index.json"
+    #BOARD_URL="https://raw.githubusercontent.com/3d-gussner/Arduino_Boards/master/IDE_Board_Manager/package_prusa3d_index.json"
 else
    BOARD_URL="https://raw.githubusercontent.com/prusa3d/Arduino_Boards/master/IDE_Board_Manager/package_prusa3d_index.json"
 fi
 BOARD_FILENAME="prusa3dboards"
 if [ "$ARDUINO_ENV" == "1.8.19" ]; then
-    BOARD_FILE_URL="https://raw.githubusercontent.com/prusa3d/Arduino_Boards/devel/IDE_Board_Manager/prusa3dboards-$BOARD_VERSION.tar.bz2"
-    #BOARD_FILE_URL="https://raw.githubusercontent.com/3d-gussner/Arduino_Boards/devel/IDE_Board_Manager/prusa3dboards-$BOARD_VERSION.tar.bz2"
+    BOARD_FILE_URL="https://raw.githubusercontent.com/prusa3d/Arduino_Boards/master/IDE_Board_Manager/prusa3dboards-$BOARD_VERSION.tar.bz2"
+    #BOARD_FILE_URL="https://raw.githubusercontent.com/3d-gussner/Arduino_Boards/master/IDE_Board_Manager/prusa3dboards-$BOARD_VERSION.tar.bz2"
 else
    BOARD_FILE_URL="https://raw.githubusercontent.com/prusa3d/Arduino_Boards/master/IDE_Board_Manager/prusa3dboards-$BOARD_VERSION.tar.bz2"
 fi
@ -882,7 +869,7 @@ else
    fi
 fi

-#'-l' argument defines if it is an English only version. Known values EN_ONLY / ALL
+#'-l' argument defines if it is an English only version. Known values EN_FARM / ALL
 #Check default language mode
 MULTI_LANGUAGE_CHECK=$(grep --max-count=1 "^#define LANG_MODE *" $SCRIPT_PATH/Firmware/config.h|sed -e's/  */ /g'|cut -d ' ' -f3)

@ -897,7 +884,7 @@ if [ -z "$language_flag" ] ; then
                break
                ;;
            "English only") 
-                LANGUAGES="EN_ONLY"
+                LANGUAGES="EN_FARM"
                break
                ;;
            *)
@ -906,11 +893,11 @@ if [ -z "$language_flag" ] ; then
        esac
    done
 else
-    if [[ "$language_flag" == "ALL" || "$language_flag" == "EN_ONLY" ]] ; then
+    if [[ "$language_flag" == "ALL" || "$language_flag" == "EN_FARM" ]] ; then
        LANGUAGES=$language_flag
    else
        echo "$(tput setaf 1)Language argument is wrong!$(tput sgr0)"
-        echo "Only $(tput setaf 2)'ALL'$(tput sgr0) or $(tput setaf 2)'EN_ONLY'$(tput sgr0) are allowed as language '-l' argument!"
+        echo "Only $(tput setaf 2)'ALL'$(tput sgr0) or $(tput setaf 2)'EN_FARM'$(tput sgr0) are allowed as language '-l' argument!"
        failures 5
    fi
 fi
@ -1110,9 +1097,9 @@ prepare_hex_folders()
        if [ $OUTPUT == "1" ] ; then
            read -t 10 -p "Press Enter to continue..."
        fi
-    elif [[ -f "$SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_ONLY.hex"  &&  "$LANGUAGES" == "EN_ONLY" ]]; then
+    elif [[ -f "$SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_FARM.hex"  &&  "$LANGUAGES" == "EN_FARM" ]]; then
        echo ""
-        ls -1 $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_ONLY.hex | xargs -n1 basename
+        ls -1 $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_FARM.hex | xargs -n1 basename
        echo "$(tput setaf 6)This hex file to be compiled already exists! To cancel this process press CRTL+C and rename existing hex file.$(tput sgr 0)"
        if [ $OUTPUT == "1" ] ; then
            read -t 10 -p "Press Enter to continue..."
@ -1171,7 +1158,7 @@ prepare_variant_for_compiling()
    sed -i -- 's/#define FW_REPOSITORY "Unknown"/#define FW_REPOSITORY "Prusa3d"/g' $SCRIPT_PATH/Firmware/Configuration.h

    #Prepare English only or multi-language version to be build
-    if [ $LANGUAGES == "EN_ONLY" ]; then
+    if [ $LANGUAGES == "EN_FARM" ]; then
        echo " "
        echo "English only language firmware will be built"
        sed -i -- "s/^#define LANG_MODE *1/#define LANG_MODE              0/g" $SCRIPT_PATH/Firmware/config.h
@ -1379,17 +1366,17 @@ create_multi_firmware()
 }
 #### End: Create and save Multi Language Prusa Firmware

-#### Start: Save EN_ONLY language Prusa Firmware
+#### Start: Save EN_FARM language Prusa Firmware
 save_en_firmware()
 {
    #else
        echo "$(tput setaf 2)Copying English only firmware to PF-build-hex folder$(tput sgr 0)"
-        cp -f $BUILD_PATH/Firmware.ino.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_ONLY.hex || failures 12
+        cp -f $BUILD_PATH/Firmware.ino.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_FARM.hex || failures 12
        echo "$(tput setaf 2)Copying English only elf file to PF-build-hex folder$(tput sgr 0)"
-        cp -f $BUILD_PATH/Firmware.ino.elf $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_ONLY.elf || failures 12
+        cp -f $BUILD_PATH/Firmware.ino.elf $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_FARM.elf || failures 12
    #fi
 }
-#### End: Save EN_ONLY language Prusa Firmware
+#### End: Save EN_FARM language Prusa Firmware

 #### Start: Cleanup Firmware
 cleanup_firmware()
@ -1562,7 +1549,7 @@ if [[ ! -z "$mk404_flag" && "$variant_flag" != "All " ]]; then
    #cd ../MK404/master/build


-#Decide which hex file to use EN_ONLY or Multi language
+#Decide which hex file to use EN_FARM or Multi language
    if [ "$LANGUAGES" == "ALL" ]; then
        if [[ "$MK404_PRINTER" == "MK3" || "$MK404_PRINTER" == "MK3S" ]]; then
            MK404_firmware_file=$SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME.hex
@ -1575,7 +1562,7 @@ if [[ ! -z "$mk404_flag" && "$variant_flag" != "All " ]]; then
            done
        fi
    else
-        MK404_firmware_file=$SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_ONLY.hex
+        MK404_firmware_file=$SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_FARM.hex
    fi

 # Start MK404
@ -1601,7 +1588,6 @@ check_OS
 check_wget
 check_zip
 check_python
-check_gawk

 #### Check for options/flags
 echo "Check for options"
--- a/build.sh
+++ b/build.sh
@ -32,7 +32,7 @@ if [ ! -f "$SCRIPT_PATH/Firmware/Configuration_prusa.h" ]; then
    cp $SCRIPT_PATH/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h $SCRIPT_PATH/Firmware/Configuration_prusa.h || exit 8
 fi

-if [[ ! -z $LANGUAGES && $LANGUAGES == "EN_ONLY" ]]; then
+if [[ ! -z $LANGUAGES && $LANGUAGES == "EN_FARM" ]]; then
    echo "English only language firmware will be built"
    sed -i -- "s/^#define LANG_MODE *1/#define LANG_MODE              0/g" $SCRIPT_PATH/Firmware/config.h
 else
--- a/lang/Community_made_translations.md
+++ b/lang/Community_made_translations.md
@ -43,7 +43,7 @@
  - [X] **Maintained**  since January 2022

 - **Norwegian / Norsk**
-  - Maintainers: **@pkg2000**
+  - Maintainers: **@OS-kar** and **@pkg2000**
  - Co-maintainers: **@trondkla**
  - Contributors:
  - [X] **Active**      since May 2022
--- a/lang/lib/charset.py
+++ b/lang/lib/charset.py
@ -13,15 +13,118 @@ CUSTOM_CHARS = {
 # This transformation is applied to the translation prior to being converted to the final encoding,
 # and maps UTF8 to UTF8. It replaces unavailable symbols in the translation to a close
 # representation in the source encoding.
+# sources
+# https://en.wikipedia.org/wiki/Czech_orthography
+# https://en.wikipedia.org/wiki/German_orthography
+# https://en.wikipedia.org/wiki/French_orthography
+# https://en.wikipedia.org/wiki/Spanish_orthography
+# https://en.wikipedia.org/wiki/Italian_orthography
+# https://en.wikipedia.org/wiki/Polish_alphabet
+# https://en.wikipedia.org/wiki/Dutch_orthography
+# https://en.wikipedia.org/wiki/Romanian_alphabet
+# https://en.wikipedia.org/wiki/Hungarian_alphabet
+# https://en.wikipedia.org/wiki/Gaj%27s_Latin_alphabet
+# https://en.wikipedia.org/wiki/Slovak_orthography
+# https://en.wikipedia.org/wiki/Swedish_alphabet
+# https://en.wikipedia.org/wiki/Norwegian_orthography
+
 TRANS_CHARS = {
-    'Ä': 'ä',
-    'Å': 'A',
-    'Ö': 'ö',
-    'Ü': 'ü',
-    'å': 'a',
-    'æ': 'ä',
-    'ø': 'ö',
-    'ß': 'ss',
+    'á': 'a', #cz,fr,es,hu,sk
+    'Á': 'A', #cz,fr,hu,sk
+    'à': 'a', #fr,it
+    'À': 'A', #fr,it
+    'â': 'a', #fr,ro
+    'Â': 'A', #ro
+    'Ä': 'ä', #de,sv,no,sk
+    'å': 'a', #sv,no
+    'Å': 'A', #sv,no
+    'æ': 'ä', #sv,no
+    'ą': 'a', #pl
+    'Ą': 'A', #pl
+    'ă': 'a', #ro
+    'Ă': 'A', #ro
+    'ć': 'c', #pl,hr
+    'Ć': 'C', #pl,hr
+    'ç': 'c', #fr,nl
+    'č': 'c', #cz,hr,sk
+    'Č': 'C', #cz,hr,sk
+    'ď': 'd', #cz,sk
+    'Ď': 'D', #cz,sk
+    'đ': 'd', #hr
+    'Đ': 'D', #hr
+    'é': 'e', #cz,fr,es,it,nl,hu,sk
+    'É': 'E', #cz,fr,it,hu,sk
+    'è': 'e', #fr,it,nl
+    'È': 'E', #fr,it
+    'ê': 'e', #fr,nl
+    'ě': 'e', #cz
+    'ë': 'e', #fr
+    'Ě': 'E', #cz
+    'ę': 'e', #pl
+    'Ę': 'E', #pl
+    'í': 'i', #cz,es,it,sk
+    'Í': 'I', #cz,it,sk
+    'î': 'i', #fr,ro
+    'Î': 'I', #ro
+    'ĺ': 'l', #sk
+    'Ĺ': 'L', #sk
+    'ł': 'l', #pl
+    'Ł': 'L', #pl
+    'ľ': 'l', #sk
+    'Ľ': 'L', #sk
+    'ń': 'n', #pl
+    'Ń': 'N', #pl
+    'ň': 'n', #cz,sk
+    'Ň': 'N', #cz,sk
+    'ñ': 'n', #es,nl
+    'ó': 'o', #cz,es,pl,hu,sk
+    'Ó': 'O', #cz,pl,hu,sk
+    'ò': 'o', #it
+    'Ò': 'O', #it
+    'ô': 'o', #fr,nl,sk
+    'Ô': 'O', #sk
+    'œ': 'o', #fr
+    'ø': 'ö', #sv,no
+    'Ø': 'ö', #sv,no
+    'Ö': 'ö', #de,sv,no,hu
+    'ő': 'o', #hu
+    'Ő': 'O', #hu
+    'ŕ': 'r', #sk
+    'Ŕ': 'R', #sk
+    'ř': 'r', #cz
+    'Ř': 'R', #cz
+    'ś': 's', #pl
+    'Ś': 's', #pl
+    'š': 's', #cz,hr,sk
+    'Š': 'S', #cz,hr,sk
+    'ș': 's', #ro
+    'Ș': 'S', #ro
+    'ß': 'ss',#de
+    'ť': 't', #cz,sk
+    'Ť': 'T', #cz,sk
+    'ț': 't', #ro
+    'Ț': 'T', #ro
+    'ú': 'u', #cz,es,hu,sk
+    'Ú': 'U', #cz,hu,sk
+    'ù': 'u', #it
+    'Ù': 'U', #it
+    'û': 'u', #fr
+    'Ü': 'ü', #de,hu
+    'ů': 'u', #cz
+    'Ů': 'U', #cz
+    'ű': 'u', #hu
+    'Ű': 'U', #hu
+    'ý': 'y', #cz,sk
+    'Ý': 'Y', #cz,sk
+    'ÿ': 'y', #fr
+    'ź': 'z', #pl
+    'Ź': 'Z', #pl
+    'ž': 'z', #cz,hr,sk
+    'Ž': 'z', #cz,hr,sk
+    'ż': 'z', #pl
+    'Ż': 'Z', #pl
+    '¿': '', #es
+    '¡': '', #es
 }


--- a/lang/po/Firmware.pot
+++ b/lang/po/Firmware.pot
--- a/lang/po/Firmware_cs.po
+++ b/lang/po/Firmware_cs.po
--- a/lang/po/Firmware_da.po
+++ b/lang/po/Firmware_da.po
--- a/lang/po/Firmware_de.po
+++ b/lang/po/Firmware_de.po
--- a/lang/po/Firmware_es.po
+++ b/lang/po/Firmware_es.po
--- a/lang/po/Firmware_fr.po
+++ b/lang/po/Firmware_fr.po
--- a/lang/po/Firmware_hr.po
+++ b/lang/po/Firmware_hr.po
--- a/lang/po/Firmware_hu.po
+++ b/lang/po/Firmware_hu.po
--- a/lang/po/Firmware_it.po
+++ b/lang/po/Firmware_it.po
--- a/lang/po/Firmware_lb.po
+++ b/lang/po/Firmware_lb.po
--- a/lang/po/Firmware_lt.po
+++ b/lang/po/Firmware_lt.po
--- a/lang/po/Firmware_nl.po
+++ b/lang/po/Firmware_nl.po
--- a/lang/po/Firmware_no.po
+++ b/lang/po/Firmware_no.po
--- a/lang/po/Firmware_pl.po
+++ b/lang/po/Firmware_pl.po
--- a/lang/po/Firmware_ro.po
+++ b/lang/po/Firmware_ro.po
--- a/lang/po/Firmware_sk.po
+++ b/lang/po/Firmware_sk.po
--- a/lang/po/Firmware_sl.po
+++ b/lang/po/Firmware_sl.po
--- a/lang/po/Firmware_sv.po
+++ b/lang/po/Firmware_sv.po
Author	SHA1	Message	Date
DRracer	12f6f34cf4	Merge pull request #3752 from 3d-gussner/MK3_3.12_v3.12.0-RC1 Bump up build number to 5576	2022-11-14 14:35:19 +01:00
3d-gussner	a8de9d5696	Bump up build number to 5576 +2 for https://github.com/prusa3d/Prusa-Firmware/pull/3745 +1 commit +1 merge	2022-11-14 14:17:11 +01:00
3d-gussner	44763f71c0	Merge pull request #3747 from leptun/3.12_MK2.5_XYZ_Cal_fixes MK2.5: unblock planner after plan_abort_hard()	2022-11-11 09:44:43 +01:00
Alex Voinea	478a9a6cec	MK2.5: unblock planner after plan_abort_hard()	2022-11-11 09:17:17 +01:00
3d-gussner	e109da4db9	Merge pull request #3741 from 3d-gussner/MK3_3.12_Pre-release_RC1 MK3 3.12.0-RC1 pre-release	2022-11-07 11:04:54 +01:00
3d-gussner	de562800ca	Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)	2022-11-07 10:37:43 +01:00
Guðni Már Gilbert	e9b7763af6	Fix long-press LCD inactivity timeout Fixes #3715 When a long-press is triggered, the LCD inactivity timer needs to be restarted. This is done with lcd_timeoutToStatus.start() This also fixes situations where a long-press is triggered, and the timer times out immediately (because it was not reset properly) Change in memory: Flash: +8 bytes SRAM: 0 bytes	2022-11-07 10:11:35 +01:00
DRracer	5355f51ba3	Merge pull request #3720 from 3d-gussner/MK3_312_Temp_Model_menu MK3_3.12: Add Menu Calibration -> Temp Model cal.	2022-11-03 12:13:40 +01:00
3d-gussner	be0f690116	Revert one message	2022-11-03 12:11:28 +01:00
3d-gussner	b470e43233	Update Norwegian translation All credits to @OS-kar	2022-11-03 12:11:28 +01:00
3d-gussner	4785eedc06	Fix typo Add lcd_setatatus_serial to output lcd status message and serial at the same time	2022-11-02 10:19:16 +01:00
3d-gussner	d42d6d94c4	Merge pull request #3721 from 3d-gussner/MK3_312_translations Update trasnlations for MK3_3.12 branch	2022-11-02 06:52:48 +01:00
3d-gussner	615073560a	Update trasnlations for MK3_3.12 branch	2022-10-28 08:41:55 +02:00
3d-gussner	67877acbf6	Fix MK25/S builds	2022-10-28 05:39:42 +02:00
3d-gussner	6d358187ff	Temp Model cal. menu	2022-10-28 05:39:14 +02:00
3d-gussner	71c9213e3a	Update Firmware_sk.po for MK3_3.12 (#3662 ) Update Firmware_sk.po Co-authored-by: ingbrzy <ingbrzy@miuios.cz>	2022-10-24 08:18:34 +02:00
3d-gussner	c0a5eac1a9	Update `Runouts` and `Gcode` translations	2022-10-24 08:16:01 +02:00
Hauzman	ba66daded6	Fix typo, update missing translation Fix again cherry-pick issues	2022-10-24 08:16:01 +02:00
Hauzman	121a7e8e15	Update MMU RO Language Co-Authored-By: Alex Voinea <voinea.dragos.alexandru@gmail.com> Fix cherry-pick issues	2022-10-24 08:16:01 +02:00
3d-gussner	cb5e6d700b	Rename Sheets - `Satin 1` to `Satin ` - `Satin 2` to `NylonPA`	2022-10-24 08:07:18 +02:00
AttilaSVK	e9f5dc7ac5	Updated Hungarian translation for MK3_3.12 Fix few cherry-pick issues	2022-10-24 08:06:15 +02:00
3d-gussner	ac3ce856f9	Merge pull request #3702 from 3d-gussner/MK3_312_Hotend_fan PFW-1415: Rename `Extruder fan` to `Hotend fan` MK3_3.12	2022-10-19 08:58:30 +02:00
3d-gussner	fac6d42151	Merge pull request #3704 from 3d-gussner/MK3_312_Croatian Update Croatian translation MK3_3.12	2022-10-19 08:49:24 +02:00
3d-gussner	8f542eca59	Merge pull request #3703 from 3d-gussner/MK3_312_diacritics Update diacritics MK3_3.12	2022-10-19 08:49:08 +02:00
3d-gussner	933bd2b3f6	Update Croatian translation All credits to @prime1910 Fix cherry-pick issues	2022-10-19 07:28:38 +02:00
3d-gussner	41df289102	Update diacritics	2022-10-19 07:05:59 +02:00
3d-gussner	1b08776873	Change fan RPM display to 5 digits All credits to @ WarrenSchultz for initial PR https://github.com/prusa3d/Prusa-Firmware/pull/3656	2022-10-19 07:01:54 +02:00
3d-gussner	162ab4538f	rename `Extruder fan` to `Hotend fan` Fix cherry-pick issues	2022-10-19 07:01:07 +02:00
Alex Voinea	b62dde7aa5	Merge pull request #3678 from leptun/3.12.0_fix_miniRambo_SD_init 3.12.0 Enable MISO pullup during SD CMD0	2022-10-10 15:11:41 +02:00
Alex Voinea	00de54adfb	Enable MISO pullup during SD CMD0 fix typo	2022-10-10 09:43:07 +02:00
3d-gussner	d9e8b18569	Merge pull request #3667 from 3d-gussner/MK3_3.12_fix_eeprom_documentation_part2 MK3_3.12 fix eeprom doxygen documentation	2022-10-07 08:25:46 +02:00
3d-gussner	b2a4194525	Merge pull request #3666 from 3d-gussner/MK3_3.12_tm_cal_click TM: Consume LCD click after calibration for MK3_3.12	2022-10-06 15:39:44 +02:00
3d-gussner	a061f4ec32	Fix Typo 0X0 to 0x0	2022-10-06 15:34:59 +02:00
3d-gussner	76cc9b9c20	Add Temp Model eeprom documentation	2022-10-06 15:34:24 +02:00
3d-gussner	07ad255f7d	replace tab with spaces fix cherry-pick issues	2022-10-06 15:33:24 +02:00
Yuri D'Elia	ae1c88823c	Also consume longpress in lcd_consume_click()	2022-10-06 15:22:08 +02:00
Yuri D'Elia	8ae499c352	TM: Consume LCD click after calibration Consume any pending LCD click after the temperature model calibration. Since we're already in the status menu, the usual consume action is not done automatically here.	2022-10-06 15:21:52 +02:00
3d-gussner	d971944d1a	Merge pull request #3651 from 3d-gussner/MK3_312_Arduino_Boards_106 Update PF-build.sh to use Arduino_boards 1.6.0 which is same as devel…	2022-10-04 08:08:21 +02:00
3d-gussner	4b384f3694	Remove gawk	2022-10-03 16:41:03 +02:00
3d-gussner	b62d36face	Update PF-build.sh to use Arduino_boards 1.6.0 which is same as devel 1.0.5-2	2022-10-03 16:31:37 +02:00
3d-gussner	fc614a6e76	Merge pull request #3635 from 3d-gussner/MK3_3.12 Version changed (3.12.0-BETA1 build 5536)	2022-09-29 20:04:21 +02:00
3d-gussner	350b2a6993	Version changed (3.12.0-BETA1 build 5536)	2022-09-29 19:57:46 +02:00
3d-gussner	784f1f77b6	Merge pull request #3634 from 3d-gussner/MK3_3.12 Cherry-pick from PR3633	2022-09-29 18:17:51 +02:00
3d-gussner	04396243a9	Update Firmware.pot and Firmware_xx.po files	2022-09-29 17:52:23 +02:00
3d-gussner	6c6f6abfc0	Rename EN_ONLY to EN_FARM remove DEBUG/DEVEL/ALPHA/BETA lcd warning Fix cherry-pick issues	2022-09-29 17:47:05 +02:00
3d-gussner	ff85e8e100	BETA firmware message only in English Rephrase BETA firmware message to fit on two screens ALPHA message same as DEVEL Fix ALPHA DEVEL message Fix cherry-pick and use MSG_AUTODEPLETE	2022-09-29 17:25:41 +02:00
Yuri D'Elia	aa721cafd9	lcd_print_pad: do not overflow len when truncating the string	2022-09-26 12:18:47 +02:00
Yuri D'Elia	6bee4fec8d	Remove unneeded lcd_finishstatus()	2022-09-23 14:55:03 +02:00
Yuri D'Elia	b710ca0e58	Improve warning behavior during thermal anomaly The current code forces any warning to return the user to the status screen in order to show the message. Thermal anomaly warnings can repeat at very short intervals, making menu navigation (to pause/tune the print) impossible. We now check if the message to be displayed is the same and only force a kickback for new messages. This partially reverts https://github.com/prusa3d/Prusa-Firmware/pull/3600 since we need the string to be null terminated for ease of comparison. We pad the status line at display time instead using the new lcd_print_pad() function which achieves the same effect.	2022-09-23 14:55:03 +02:00
Yuri D'Elia	d4aeddf90d	Merge pull request #3619 from wavexx/fixes_round2 Do not hang during startup	2022-09-21 16:27:34 +02:00
Yuri D'Elia	bb0489cba6	Do not hang during startup In ultralcd_init() do not use lcd_setstatuspgm() to initialize the welcome message. The internal call to lcd_finishstatus() requires the serial to be already available. Split the function into lcd_padstatus() to pre-pad the string and save some space.	2022-09-21 16:19:08 +02:00
Yuri D'Elia	081501f832	Merge pull request #3617 from wavexx/merge_mk3_fixes Merge important bugfixes for the next 3.12 release	2022-09-21 15:18:13 +02:00
Alex Voinea	7bd9e5e06e	Move strings to progmem	2022-09-21 15:09:27 +02:00
Yuri D'Elia	140961290d	Do not reset line on serial commands without N Fix regression introduced in `fc10ca3146`. Accept incoming serial commands without line numbers (assumed to be injected by the host), but do not reset the last line count when doing so.	2022-09-21 15:05:21 +02:00
Yuri D'Elia	2bd4aef23e	Temperature model: update R0 estimate Update the default R0 estimate thanks to a larger dataset. This improves the error margin during self-check.	2022-09-21 15:05:05 +02:00
Guðni Már Gilbert	9bff10add5	Don't inline the function Change in memory: Flash: -44 bytes SRAM: 0 bytes	2022-09-21 15:04:40 +02:00
Guðni Már Gilbert	b1bee597aa	Remove atomic_update parameter Change in memory: Flash: +24 bytes SRAM: -0 byte	2022-09-21 15:04:40 +02:00
Guðni Már Gilbert	b2530eeb13	Optimisation: Remove duplicated code in cmdqueue_could_enqueue_back() Code is 28 lines shorter :) Change in memory: Flash: -42 bytes SRAM: 0 bytes	2022-09-21 15:04:40 +02:00
Guðni Már Gilbert	33495d7516	Remove redundant for-loop Now that lcd_status_message is now initialised correctly at boot-up, this for-loop is no longer required. Now lcd_status_message is only set in lcd_updatestatus() which always calls lcd_finishstatus() lcd_finishstatus() makes sure the message does not exceed 20 characters Saves 34 bytes of flash	2022-09-21 15:02:26 +02:00
Guðni Már Gilbert	540ce31082	Don't initialise lcd status message in definition static variables are automatically zero initialised. Now that the status line message is initialised in ultralcd_init(), we don't need to set the variable in global scope. Saves 22 bytes of flash and 1 byte of SRAM	2022-09-21 15:02:26 +02:00
Guðni Már Gilbert	336c41ffe3	Initialise status line message in setup() Fixes #3581	2022-09-21 15:02:26 +02:00
Alex Voinea	9225c5e28b	Show firmware version on splash screen	2022-09-21 14:59:36 +02:00
Yuri D'Elia	8cfd48cb08	Merge pull request #3608 from wavexx/set_312_version Update FW version for 3.12 branch	2022-09-21 14:37:02 +02:00
Yuri D'Elia	178b3e1db4	Update current FW version	2022-09-19 18:11:19 +02:00