321 lines
18 KiB
C++
321 lines
18 KiB
C++
// Extracted from Prusa-Error-Codes repo
|
|
// Subject to automation and optimization
|
|
#pragma once
|
|
#include "inttypes.h"
|
|
#include "../language.h"
|
|
#include <avr/pgmspace.h>
|
|
|
|
namespace MMU2 {
|
|
|
|
static constexpr uint8_t ERR_MMU_CODE = 4;
|
|
|
|
typedef enum : uint16_t {
|
|
ERR_UNDEF = 0,
|
|
|
|
ERR_MECHANICAL = 100,
|
|
ERR_MECHANICAL_FINDA_DIDNT_TRIGGER,
|
|
ERR_MECHANICAL_FINDA_DIDNT_SWITCH_OFF,
|
|
ERR_MECHANICAL_FSENSOR_DIDNT_TRIGGER,
|
|
ERR_MECHANICAL_FSENSOR_DIDNT_SWITCH_OFF,
|
|
|
|
ERR_MECHANICAL_PULLEY_STALLED = 105,
|
|
ERR_MECHANICAL_SELECTOR_CANNOT_HOME = 115,
|
|
ERR_MECHANICAL_IDLER_CANNOT_HOME = 125,
|
|
|
|
|
|
ERR_TEMPERATURE = 200,
|
|
ERR_TEMPERATURE_TMC_PULLEY_OVER_TEMPERATURE_WARN = 201,
|
|
ERR_TEMPERATURE_TMC_SELECTOR_OVER_TEMPERATURE_WARN = 211,
|
|
ERR_TEMPERATURE_TMC_IDLER_OVER_TEMPERATURE_WARN = 221,
|
|
|
|
ERR_TEMPERATURE_TMC_PULLEY_OVER_TEMPERATURE_ERROR = 202,
|
|
ERR_TEMPERATURE_TMC_SELECTOR_OVER_TEMPERATURE_ERROR = 212,
|
|
ERR_TEMPERATURE_TMC_IDLER_OVER_TEMPERATURE_ERROR = 222,
|
|
|
|
|
|
ERR_ELECTRICAL = 300,
|
|
ERR_ELECTRICAL_TMC_PULLEY_DRIVER_ERROR = 301,
|
|
ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_ERROR = 311,
|
|
ERR_ELECTRICAL_TMC_IDLER_DRIVER_ERROR = 321,
|
|
|
|
ERR_ELECTRICAL_TMC_PULLEY_DRIVER_RESET = 302,
|
|
ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_RESET = 312,
|
|
ERR_ELECTRICAL_TMC_IDLER_DRIVER_RESET = 322,
|
|
|
|
ERR_ELECTRICAL_TMC_PULLEY_UNDERVOLTAGE_ERROR = 303,
|
|
ERR_ELECTRICAL_TMC_SELECTOR_UNDERVOLTAGE_ERROR = 313,
|
|
ERR_ELECTRICAL_TMC_IDLER_UNDERVOLTAGE_ERROR = 323,
|
|
|
|
ERR_ELECTRICAL_TMC_PULLEY_DRIVER_SHORTED = 304,
|
|
ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_SHORTED = 314,
|
|
ERR_ELECTRICAL_TMC_IDLER_DRIVER_SHORTED = 324,
|
|
|
|
|
|
ERR_CONNECT = 400,
|
|
ERR_CONNECT_MMU_NOT_RESPONDING = 401,
|
|
ERR_CONNECT_COMMUNICATION_ERROR = 402,
|
|
|
|
|
|
ERR_SYSTEM = 500,
|
|
ERR_SYSTEM_FILAMENT_ALREADY_LOADED = 501,
|
|
ERR_SYSTEM_INVALID_TOOL = 502,
|
|
ERR_SYSTEM_QUEUE_FULL = 503,
|
|
ERR_SYSTEM_VERSION_MISMATCH = 504,
|
|
ERR_SYSTEM_RUNTIME_ERROR = 505,
|
|
|
|
ERR_OTHER = 900
|
|
} err_num_t;
|
|
|
|
// Avr gcc has serious trouble understanding static data structures in PROGMEM
|
|
// and inadvertedly falls back to copying the whole structure into RAM (which is obviously unwanted).
|
|
// But since this file ought to be generated in the future from yaml prescription,
|
|
// it really makes no difference if there are "nice" data structures or plain arrays.
|
|
static const uint16_t errorCodes[] PROGMEM = {
|
|
ERR_MECHANICAL_FINDA_DIDNT_TRIGGER,
|
|
ERR_MECHANICAL_FINDA_DIDNT_SWITCH_OFF,
|
|
ERR_MECHANICAL_FSENSOR_DIDNT_TRIGGER,
|
|
ERR_MECHANICAL_FSENSOR_DIDNT_SWITCH_OFF,
|
|
ERR_MECHANICAL_PULLEY_STALLED,
|
|
ERR_MECHANICAL_SELECTOR_CANNOT_HOME,
|
|
ERR_MECHANICAL_IDLER_CANNOT_HOME,
|
|
ERR_TEMPERATURE_TMC_PULLEY_OVER_TEMPERATURE_WARN,
|
|
ERR_TEMPERATURE_TMC_SELECTOR_OVER_TEMPERATURE_WARN,
|
|
ERR_TEMPERATURE_TMC_IDLER_OVER_TEMPERATURE_WARN,
|
|
ERR_TEMPERATURE_TMC_PULLEY_OVER_TEMPERATURE_ERROR,
|
|
ERR_TEMPERATURE_TMC_SELECTOR_OVER_TEMPERATURE_ERROR,
|
|
ERR_TEMPERATURE_TMC_IDLER_OVER_TEMPERATURE_ERROR,
|
|
ERR_ELECTRICAL_TMC_PULLEY_DRIVER_ERROR,
|
|
ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_ERROR,
|
|
ERR_ELECTRICAL_TMC_IDLER_DRIVER_ERROR,
|
|
ERR_ELECTRICAL_TMC_PULLEY_DRIVER_RESET,
|
|
ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_RESET,
|
|
ERR_ELECTRICAL_TMC_IDLER_DRIVER_RESET,
|
|
ERR_ELECTRICAL_TMC_PULLEY_UNDERVOLTAGE_ERROR,
|
|
ERR_ELECTRICAL_TMC_SELECTOR_UNDERVOLTAGE_ERROR,
|
|
ERR_ELECTRICAL_TMC_IDLER_UNDERVOLTAGE_ERROR,
|
|
ERR_ELECTRICAL_TMC_PULLEY_DRIVER_SHORTED,
|
|
ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_SHORTED,
|
|
ERR_ELECTRICAL_TMC_IDLER_DRIVER_SHORTED,
|
|
ERR_CONNECT_MMU_NOT_RESPONDING,
|
|
ERR_CONNECT_COMMUNICATION_ERROR,
|
|
ERR_SYSTEM_FILAMENT_ALREADY_LOADED,
|
|
ERR_SYSTEM_INVALID_TOOL,
|
|
ERR_SYSTEM_QUEUE_FULL,
|
|
ERR_SYSTEM_VERSION_MISMATCH,
|
|
ERR_SYSTEM_RUNTIME_ERROR,
|
|
};
|
|
|
|
// @@TODO some of the strings are duplicates, can be merged into one
|
|
static const char titleFINDA_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("FINDA NOT ON");
|
|
static const char titleFINDA_DIDNT_SWITCH_OFF[] PROGMEM_I1 = ISTR("FINDA NOT OFF");
|
|
static const char titleFSENSOR_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("FSENSOR NOT ON");
|
|
static const char titleFSENSOR_DIDNT_SWITCH_OFF[] PROGMEM_I1 = ISTR("FSENSOR NOT OFF");
|
|
static const char titlePULLEY_STALLED[] PROGMEM_I1 = ISTR("PULLEY STALLED");
|
|
static const char titleSELECTOR_CANNOT_HOME[] PROGMEM_I1 = ISTR("SELECTOR CAN'T HOME");
|
|
static const char titleIDLER_CANNOT_HOME[] PROGMEM_I1 = ISTR("IDLER CANNOT HOME");
|
|
static const char titleTMC_PULLEY_OVER_TEMPERATURE_WARN[] PROGMEM_I1 = ISTR("TMC TOO HOT");
|
|
static const char titleTMC_SELECTOR_OVER_TEMPERATURE_WARN[] PROGMEM_I1 = ISTR("TMC TOO HOT");
|
|
static const char titleTMC_IDLER_OVER_TEMPERATURE_WARN[] PROGMEM_I1 = ISTR("TMC TOO HOT");
|
|
static const char titleTMC_PULLEY_OVER_TEMPERATURE_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR");
|
|
static const char titleTMC_SELECTOR_OVER_TEMPERATURE_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR");
|
|
static const char titleTMC_IDLER_OVER_TEMPERATURE_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR");
|
|
static const char titleTMC_PULLEY_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR");
|
|
static const char titleTMC_SELECTOR_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR");
|
|
static const char titleTMC_IDLER_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR");
|
|
static const char titleTMC_PULLEY_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET");
|
|
static const char titleTMC_SELECTOR_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET");
|
|
static const char titleTMC_IDLER_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET");
|
|
static const char titleTMC_PULLEY_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLT ERROR");
|
|
static const char titleTMC_SELECTOR_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLT ERROR");
|
|
static const char titleTMC_IDLER_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLT ERROR");
|
|
static const char titleTMC_PULLEY_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED");
|
|
static const char titleTMC_SELECTOR_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED");
|
|
static const char titleTMC_IDLER_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED");
|
|
static const char titleMMU_NOT_RESPONDING[] PROGMEM_I1 = ISTR("MMU NOT RESPONDING");
|
|
static const char titleCOMMUNICATION_ERROR[] PROGMEM_I1 = ISTR("COMMUNICATION ERROR");
|
|
static const char titleFILAMENT_ALREADY_LOADED[] PROGMEM_I1 = ISTR("ALREADY LOADED");
|
|
static const char titleINVALID_TOOL[] PROGMEM_I1 = ISTR("INVALID TOOL");
|
|
static const char titleQUEUE_FULL[] PROGMEM_I1 = ISTR("QUEUE FULL");
|
|
static const char titleVERSION_MISMATCH[] PROGMEM_I1 = ISTR("FW VERSION MISMATCH");
|
|
static const char titleRUNTIME_ERROR[] PROGMEM_I1 = ISTR("FW RUNTIME ERROR");
|
|
|
|
static const char * const errorTitles [] PROGMEM = {
|
|
titleFINDA_DIDNT_TRIGGER,
|
|
titleFINDA_DIDNT_SWITCH_OFF,
|
|
titleFSENSOR_DIDNT_TRIGGER,
|
|
titleFSENSOR_DIDNT_SWITCH_OFF,
|
|
titlePULLEY_STALLED,
|
|
titleSELECTOR_CANNOT_HOME,
|
|
titleIDLER_CANNOT_HOME,
|
|
titleTMC_PULLEY_OVER_TEMPERATURE_WARN,
|
|
titleTMC_SELECTOR_OVER_TEMPERATURE_WARN,
|
|
titleTMC_IDLER_OVER_TEMPERATURE_WARN,
|
|
titleTMC_PULLEY_OVER_TEMPERATURE_ERROR,
|
|
titleTMC_SELECTOR_OVER_TEMPERATURE_ERROR,
|
|
titleTMC_IDLER_OVER_TEMPERATURE_ERROR,
|
|
titleTMC_PULLEY_DRIVER_ERROR,
|
|
titleTMC_SELECTOR_DRIVER_ERROR,
|
|
titleTMC_IDLER_DRIVER_ERROR,
|
|
titleTMC_PULLEY_DRIVER_RESET,
|
|
titleTMC_SELECTOR_DRIVER_RESET,
|
|
titleTMC_IDLER_DRIVER_RESET,
|
|
titleTMC_PULLEY_UNDERVOLTAGE_ERROR,
|
|
titleTMC_SELECTOR_UNDERVOLTAGE_ERROR,
|
|
titleTMC_IDLER_UNDERVOLTAGE_ERROR,
|
|
titleTMC_PULLEY_DRIVER_SHORTED,
|
|
titleTMC_SELECTOR_DRIVER_SHORTED,
|
|
titleTMC_IDLER_DRIVER_SHORTED,
|
|
titleMMU_NOT_RESPONDING,
|
|
titleCOMMUNICATION_ERROR,
|
|
titleFILAMENT_ALREADY_LOADED,
|
|
titleINVALID_TOOL,
|
|
titleQUEUE_FULL,
|
|
titleVERSION_MISMATCH,
|
|
titleRUNTIME_ERROR,
|
|
};
|
|
|
|
// @@TODO looking at the texts, they can be composed of several parts and/or parametrized (could save a lot of space ;) )
|
|
static const char descFINDA_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("FINDA didn't trigger while loading filament. Ensure that the steel FINDA ball can move freely and check the wiring.");
|
|
static const char descFINDA_DIDNT_SWITCH_OFF[] PROGMEM_I1 = ISTR("FINDA didn't switch off while unloading filament. Try unloading the filament manually and ensure steel FINDA ball can move freely.");
|
|
static const char descFSENSOR_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("Filament sensor didn't trigger while loading the filament. Check that the filament reached the fsensor and check the wiring.");
|
|
static const char descFSENSOR_DIDNT_SWITCH_OFF[] PROGMEM_I1 = ISTR("Filament sensor didn't switch off while unloading the filament. The filament is probably stuck near the sensor or the sensor is malfunctioning.");
|
|
static const char descPULLEY_STALLED[] PROGMEM_I1 = ISTR("The Pulley stalled - check for anything blocking the filament from being pushed/pulled to/from the extruder.");
|
|
static const char descSELECTOR_CANNOT_HOME[] PROGMEM_I1 = ISTR("The Selector cannot home properly - check for anything blocking its movement.");
|
|
static const char descIDLER_CANNOT_HOME[] PROGMEM_I1 = ISTR("The Idler cannot home properly - check for anything blocking its movement.");
|
|
static const char descTMC_PULLEY_OVER_TEMPERATURE_WARN[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is almost overheated. Make sure there is sufficient airflow near the MMU board.");
|
|
static const char descTMC_SELECTOR_OVER_TEMPERATURE_WARN[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is almost overheated. Make sure there is sufficient airflow near the MMU board.");
|
|
static const char descTMC_IDLER_OVER_TEMPERATURE_WARN[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is almost overheated. Make sure there is sufficient airflow near the MMU board.");
|
|
static const char descTMC_PULLEY_OVER_TEMPERATURE_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is overheated. Cool down the MMU board and restart MMU.");
|
|
static const char descTMC_SELECTOR_OVER_TEMPERATURE_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is overheated. Cool down the MMU board and restart MMU.");
|
|
static const char descTMC_IDLER_OVER_TEMPERATURE_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is overheated. Cool down the MMU board and restart MMU.");
|
|
static const char descTMC_PULLEY_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is not responding. Try restarting the MMU. If the issue persist contact the support.");
|
|
static const char descTMC_SELECTOR_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is not responding. Try restarting the MMU. If the issue persist contact the support.");
|
|
static const char descTMC_IDLER_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is not responding. Try restarting the MMU. If the issue persist contact the support.");
|
|
static const char descTMC_PULLEY_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
|
|
static const char descTMC_SELECTOR_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
|
|
static const char descTMC_IDLER_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
|
|
static const char descTMC_PULLEY_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Pulley TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
|
|
static const char descTMC_SELECTOR_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Selector TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
|
|
static const char descTMC_IDLER_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Idler TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
|
|
static const char descTMC_PULLEY_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Pulley TMC driver. Check the wiring and connectors. If the issue persist contact the support.");
|
|
static const char descTMC_SELECTOR_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Selector TMC driver. Check the wiring and connectors. If the issue persist contact the support.");
|
|
static const char descTMC_IDLER_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Idler TMC driver. Check the wiring and connectors. If the issue persist contact the support.");
|
|
static const char descMMU_NOT_RESPONDING[] PROGMEM_I1 = ISTR("MMU unit not responding. Check the wiring and connectors. If the issue persist contact the support.");
|
|
static const char descCOMMUNICATION_ERROR[] PROGMEM_I1 = ISTR("MMU unit not responding correctly. Check the wiring and connectors. If the issue persist contact the support.");
|
|
static const char descFILAMENT_ALREADY_LOADED[] PROGMEM_I1 = ISTR("Cannot perform the action, filament is already loaded. Unload it first.");
|
|
static const char descINVALID_TOOL[] PROGMEM_I1 = ISTR("Requested filament tool is not available on this hardware. Check the G-code file for possible issue.");
|
|
static const char descQUEUE_FULL[] PROGMEM_I1 = ISTR("Internal runtime error of the firmware, please restart the MMU.");
|
|
static const char descVERSION_MISMATCH[] PROGMEM_I1 = ISTR("The MMU unit reports its FW version incompatible with the printer's firmware. Make sure the MMU firmware is up to date.");
|
|
static const char descRUNTIME_ERROR[] PROGMEM_I1 = ISTR("Internal runtime error. Try restarting the MMU unit or updating the firmware. If the issue persist contact the support.");
|
|
|
|
static const char * const errorDescs[] PROGMEM = {
|
|
descFINDA_DIDNT_TRIGGER,
|
|
descFINDA_DIDNT_SWITCH_OFF,
|
|
descFSENSOR_DIDNT_TRIGGER,
|
|
descFSENSOR_DIDNT_SWITCH_OFF,
|
|
descPULLEY_STALLED,
|
|
descSELECTOR_CANNOT_HOME,
|
|
descIDLER_CANNOT_HOME,
|
|
descTMC_PULLEY_OVER_TEMPERATURE_WARN,
|
|
descTMC_SELECTOR_OVER_TEMPERATURE_WARN,
|
|
descTMC_IDLER_OVER_TEMPERATURE_WARN,
|
|
descTMC_PULLEY_OVER_TEMPERATURE_ERROR,
|
|
descTMC_SELECTOR_OVER_TEMPERATURE_ERROR,
|
|
descTMC_IDLER_OVER_TEMPERATURE_ERROR,
|
|
descTMC_PULLEY_DRIVER_ERROR,
|
|
descTMC_SELECTOR_DRIVER_ERROR,
|
|
descTMC_IDLER_DRIVER_ERROR,
|
|
descTMC_PULLEY_DRIVER_RESET,
|
|
descTMC_SELECTOR_DRIVER_RESET,
|
|
descTMC_IDLER_DRIVER_RESET,
|
|
descTMC_PULLEY_UNDERVOLTAGE_ERROR,
|
|
descTMC_SELECTOR_UNDERVOLTAGE_ERROR,
|
|
descTMC_IDLER_UNDERVOLTAGE_ERROR,
|
|
descTMC_PULLEY_DRIVER_SHORTED,
|
|
descTMC_SELECTOR_DRIVER_SHORTED,
|
|
descTMC_IDLER_DRIVER_SHORTED,
|
|
descMMU_NOT_RESPONDING,
|
|
descCOMMUNICATION_ERROR,
|
|
descFILAMENT_ALREADY_LOADED,
|
|
descINVALID_TOOL,
|
|
descQUEUE_FULL,
|
|
descVERSION_MISMATCH,
|
|
descRUNTIME_ERROR,
|
|
};
|
|
|
|
/// Will be mapped onto dialog button responses in the FW
|
|
/// Those responses have their unique+translated texts as well
|
|
enum class ButtonOperations : uint8_t {
|
|
NoOperation,
|
|
Retry,
|
|
SlowLoad,
|
|
Continue,
|
|
RestartMMU,
|
|
Unload,
|
|
StopPrint,
|
|
DisableMMU,
|
|
};
|
|
|
|
// we have max 3 buttons/operations to select from
|
|
// one of them is "More" to show the explanation text normally hidden in the next screens.
|
|
// 01234567890123456789
|
|
// >bttxt >bttxt >MoreW
|
|
// Therefore at least some of the buttons, which can occur on the screen together, need to be 5-chars long max @@TODO.
|
|
// @@TODO beware - this doesn't correspond to the HW MMU buttons - needs to be discussed
|
|
static const char btnRetry[] PROGMEM_I1 = ISTR("Retry");
|
|
static const char btnSlowLoad[] PROGMEM_I1 = ISTR("Slow");
|
|
static const char btnContinue[] PROGMEM_I1 = ISTR("Done");
|
|
static const char btnRestartMMU[] PROGMEM_I1 = ISTR("RstMMU");
|
|
static const char btnUnload[] PROGMEM_I1 = ISTR("Unload");
|
|
static const char btnStop[] PROGMEM_I1 = ISTR("Stop");
|
|
static const char btnDisableMMU[] PROGMEM_I1 = ISTR("Disable");
|
|
static const char btnMore[] PROGMEM_I1 = ISTR("More\x01");
|
|
|
|
// We have 8 different operations/buttons at this time, so we need at least 4 bits to encode each.
|
|
// Since one of the buttons is always "More", we can skip that one.
|
|
// Therefore we need just 1 byte to describe the necessary buttons for each screen.
|
|
uint8_t constexpr Btns(ButtonOperations b0, ButtonOperations b1){
|
|
return ((uint8_t)b1) << 4 | ((uint8_t)b0);
|
|
}
|
|
|
|
static const uint8_t errorButtons[] PROGMEM = {
|
|
Btns(ButtonOperations::Retry, ButtonOperations::Continue),
|
|
Btns(ButtonOperations::Retry, ButtonOperations::Continue),
|
|
Btns(ButtonOperations::Retry, ButtonOperations::Continue),
|
|
Btns(ButtonOperations::Retry, ButtonOperations::Continue),
|
|
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::Continue),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::Continue),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::Continue),
|
|
|
|
Btns(ButtonOperations::Continue, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::Continue, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::Continue, ButtonOperations::RestartMMU),
|
|
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
|
|
Btns(ButtonOperations::Unload, ButtonOperations::Continue),
|
|
Btns(ButtonOperations::StopPrint, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::DisableMMU),
|
|
Btns(ButtonOperations::NoOperation, ButtonOperations::RestartMMU),
|
|
};
|
|
|
|
} // namespace MMU2
|